The AXEM motor, with more than 2 million units produced, is one of the most widely spread servomotors in the world.
Its disk rotor, composed solely of copper and insulator, achieves high dynamics and excellent regulation of motion at low speed, as well as silent and vibration-free functioning.
Robust and efficient, low maintenance.
Very low speed modulation (large number of commutator segments)
No commutation limits (iron-free rotor)
Exceptional regulation at low speed
Maintenance free (little or no wear of brushes)
High dynamics (very low rotor inertia)
Examples of Applications :
The motor of reference in robotics for many years, AXEM, with its exceptional qualities, maintains its superiority in applications requiring a very high quality rotation (three dimensional measuring test benches, for example). In numerous medical applications its principal assets are its reliability, its low sound level and its economical aspect.
The RTS servo amplifiers provide optimum control of AXEM motors in speed loop.
A complete range of high performance, low inertia, ac brushless servo motors. These are compatible with the 631/635 series(230Vac) and 637+ series (400Vac) servo drives.
The ACG range offers tremendous value while the ACM2n/ACR range can accommodate a wide variety of options to suit virtually any application at a cost effective price.
The EX Servo motors are designed to function in Category II, Group II explosive atmospheres in respect to the EN 50014 standard. These servo-motors are certified according to directive ATEX 94/9/CE and are available in a Gas or Gas-Dust version. The difference between the two being that the Gas-Dust version is equipped with a special lip seal on the customer end shaft.
Gas Version: II2 G EEx D IIB T4
Gas-Dust Version: II2 GD EEx D IIB T4
Key Points :
Explosion-proof material "D" according to directive ATEX 94/9/CE
Extremely compact
High Dynamics
Integrated Resolver not requiring an additional encoder
Bearings greased for life not requiring maintenance
The EX Servo motors are designed to function in Category II, Group II explosive atmospheres in respect to the EN 50014 standard. These servo-motors are certified according to directive ATEX 94/9/CE and are available in a Gas or Gas-Dust version. The difference between the two being that the Gas-Dust version is equipped with a special lip seal on the customer end shaft.
Based on flux concentration technology and controlled by the DIGIVEX Drive range, the HV synchronous servomotors are designed for the spindle motorisation of conventional machines.
Developed by Parvex, this technology enables a range of constant power to speed ratio of up to 10 to be covered. And the HV motors have dynamic characteristics equivalent to axis servomotors : very high mass to torque ratio, low inertia, high torque at standstill :
High torque/weight ratio for increased machine compactness
Low inertia for rapid changes in speed
Exceptional regulation at low speed
Wide speed range at constant power : ratio up to 10
The HW servomotors are water-cooled Brushless Synchronous motors delivered as individual components (rotor, stator and resolver) to make a complete spindle unit. These motors are driven by Digivex DPD or DPM series servo drives.
Highlights :
Permanent Magnet, Cold Rotor
Compact Size with Low Rotor Inertia
Stable Balancing
Speed Range to 50,000 RPM
Reduced Maintenance
High Torque at Zero Speed
Positioning Capability
Other Servo Motor Designs :
AXEM - Disk Rotor Servo Motors from 0.14 TO 22.9 Nm
RX - Economical DC Brush Solution from 0.3 TO 8 Nm
RS - High Performance DC Brush Range from 0.05 TO 13 Nm
AXL - Compact Motor/Reducer Combination
XD - For Use in Hazardous Environments
Customized Motors with Special Cables, Connectors, Feedback, Windings, Flanges, etc.
Servomotor kit is an innovative and global approach enabling the complete integration of motor in a simplified mechanical system. The size constraints are considered with a maximum effectiveness.
This approach provides accuracy, reliability and robustness benefits matchless with traditional construction.
Mechanical compactness and weight.
Cost reduction.
Direct drive: accurate and robust mechanics.
Complete and optimised solution including sensor and drive.
This servo range offers an extremely wide choice of Brushless, Water-cooled Brushless Synchronous and DC Brush motors and compatible drives.
In addition to standard products with torque ratings from 0.3 to 320 Nm, custom solutions allow us to meet standard and specialized servo applications across all industries.
The high performance range of DC motors, using high energy magnets, RS DC motors combined with RTS drives are particularly suitable for applications which require a very compact solution or a high dynamic level.
High-performance DC motor
High torque / weight ratio
Renowned construction quality
Excellent low-speed functioning
Very long life (brush quality)
Examples of Applications :
Because of their performance levels, RS motors are particularly suitable for machines with high dynamic levels
Pick and place of electronic components.
Small size robotics and gantries.
Office technology (printers, copiers, magnetic tape winders, post sorting)
Textile cutting (knife, laser)
Optimum speed control of the RS motors is provided by the RTS series of servo amplifier.
Application Systems Deals in supplying and manufacturing of ac motors, dc drives, electric motors, electric power motors, eddy current dynamometer, self cooled electric motors, rotating machine electric motors and hormonic filteration dc drives.
Namita Electro Traders Supplying electric motors such as custom built special motors, brake motors, crane duty motor, three phase brake motors, drive duty motor, dual speed brake motors, single phase brake motors and flame proof brake motors in Punjab.
Processing...
