Gear Chamfering Cutters are used for gear chamfering and deburring in the automobile industry. The cutters can deburring both sides of the gear at the same time. We can supply the cutters according to request. These are held against the sides of faces of the gear. The variation in the width of blank is taken by spring loaded blades. Deburring cutters remove burrs neatly. These are re-sharpenable and give long life.
Basic Parameters Range 0. 5 module to 35 module & 64 DP to 0. 75 DP Accuracy: Ground relieved & form relieved profile in Class A, B, C (as per DIN 3968 or equivalent AGMA, JIS standard) with all standard & non-standard profiles Material: M-2, M35, T1, T2, M4, T5, ASP 2030, 2060 etc. SURFACE TREATMENT: Available in TiN, TiCN, TiACN Coatings Custom made gear milling cutters can be offered on receipt of special specifications and drawings INVOLUTE GEAR CUTTERS- SPLINE MILLING CUTTERS SPROCKET MILLING CUTTERS Available in Ground relieved & form relieved profile in Class A, B, C. These milling cutters are available in a set of 8 different form cutters from No. 1 to 8 to cut any number of teeth in gears from 0. 5 module to 40 module & 0. 75 DP to 64 DP with conforming standards to BS, IS, DIN.
Yash Tools offers a wide variety of gear hobs. These gear cutters are the best gear cutting tools in the automobile and industrial machinery industries. All types of high speed steel hobs are supplied to cut involute gears, splines, serrations and special forms. All cutters are developed and manufactured through a process of total quality control, management and extensive research and development activities Basic Parameters Range 0. 5 module to 35 module & 64 DP to 0. 8 DP Forms: Non-Topping, Semi-Topping, Topping, finishing, pre-shaving, pre- grinding, with or without protuberance, full fillet etc. Start: Single or Multi Start Accuracy: AA, A, B & C (as per DIN 3968 or equivalent AGMA, JIS standard) with all standard & non-standard profiles Material: M-2, M35, T1, T2, M4, T5, ASP 30 etc.
Gear Shaper cutters are designed and produced for cutting any type of gear, internal or external, spur or helical. They can also be designed to cut splines, serrations, sprockets or other involute forms Basic Parameters- Module 0. 50 to 20. 00 Pressure Angle 14030 to 300 Accuracy Class AA & A as per DIN, BS, ASA standards specification Special features: chamfering, semi-topping, protuberance, flat or fillet roots Spur & Helical: With all standard & non-standard profiles Material: M35, T1, T2, M4, T5, ASP 30 etc. Disc Type Gear Shaper Cutter These shaper cutters have a disc shaped which have the general utility to give roughing or finish form to cut spur, helical & spline gear. Shank type Gear Shaper cutters - This type of cutter is used to cut internal gears of small diameter and spline holes. They can also be designed for external gears depending on the job. Deep Counterbore Type Shaper Cutter - These cutters can be used for roughing & finishing external gears where it is not feasible to use external disc type cutters
Bevel Cutters & Blades We can supply different types of cutters blades for Spiral & Straight bevel & hypoid gears of the following varieties. f Rack tools for straight or helical gear cutting f module ZFTK type blades f Klingelnberg type blades f Gleason!&s type blades f Revex type roughing blades f Coniflex G. 114/104/102 type blades f Oerlikon type blades f RSR type blades f Alternate or Triplex roughing & finishing blades f Ridge-AC, Hardac, Wede-AC, Helixform type blades f Ridge Ac - For Crown wheel and pinion roughing f HARDAC I, II & III for Pinion Finishing Concave & Convex Side f SINGLE CYCLE HELIX FORM for Crown Wheel Finishing f SOLID BODY CUTTERS f Coniflex Dish Type cutter for Gleason machine 104. f Inserted Coniflex for Gleason 114 f Twin Blade Coniflex Cutters for Gleason 14 Available high speed tool steels are M2, M35 and ASP2030
GROUND THREAD HAND & MACHINE TAPS/ Hand & Machine Spiral Flute Taps/ Ground Thread Small Nut Taps Coarse pitch taps in set of 3 pieces Thread Taps(Types): Short Machine Taps Spiral Point Taps NPT & NGT Taps Nib Taps Long Machine Taps BSP Parallel Taps Serial Foam Taps Spiral Fluted Taps (A collarge of all the pictures presented in this page)
Range: Taps are available in the following Range: 1 mm to 120 mm. 1/16" to 5" Thread Foams: BSW / BSF / UNF / UNC / BSP / BSPT / NPT / NGT / ACME. Surface Treatment: Available in Blued / Nitrated / Tin Coated. Material: Steel carbon, M2, M35, M42 as well as in special steel as per customers specifications.
HSS METAL SLITTING SAWS STRAGGERED TOOTH/CHIP CLEARANCE/ STRIAGHT/CURVED TOOTH HSS Slitting Saws are manufactured for Ferrous Metal and for Non-Ferrous metal Industry. These Blades are specifically suited for use in manual, semi-automatic and fully-automatic sawing operations. All blades are hardened to 63/64 HRC, triple tempered and pressed quenched to give flattest saw possible. Designed for general slotting or cut-off operations Type: Fine / Coarse Teeth Accuracy: (high tolerances) Type A, B Grounded as per DIN, BS, ASA standards specification Thickness: 0. 20 mm 60 mm Size range: 25mm (1) dia to 400mm (16) dia
Rack type cutters are produced from 1 module 30 module ranging from single tooth to multi tooth depending upon client requirement for the Sunderland and Maag & gear planning machines for both spur and helical gears. Available in HSS M2, ASP 2030 & ASP 2023 material
Shacon Engineering Company Engaged in supplying and manufacturing gearbox, precision gearbox, worm gearbox, industrial gearbox, worm gear boxes, vertical gear boxes, special gear boxes, integral base gear boxes (horizontal) and commercial gearbox.
Processing...
_250x250.jpg)
