We manufacture proximal femoral nail which is a new intramedullary device. It offers benefits of closed technique for the treatment of hip fractures. The PFN we supply are manufactured with an ultra high strength stainless steel alloy, which has sufficient strength to bear weight even with unstable hip fractures. Our nail is a modification of gamma nail but it is comparatively thinner than it and occupies less space.
Its features are

• Sizes: Diameter 9mm to 12mm
• Length: 250mm.
• Proximal locking bolts: 6.4mm diameter (cannulated)
  • lengths 60mm to 110mm and 8mm diameter (cannulated),
  • lengths 60mm to 100mm.
• 4.9mm locking bolts of length upto 50mm (with a difference of 2mm).

We offer best quality excel nails which are being manufactured by using most advanced development in the original intramedullary principles. Our excel nails are used in the treatment of distal fractures.

Features:

• Our excel nail is cannulated with different thickness at proximal & shaft region. Its proximal diameter is 13mm with wall thickness of 2mm at shaft region. Nail is tapered at proximal end.
• Angle 10 degree have 2 oval holes, at proximal end, for dynamization & round for static locking. Nail is cut off at proximal end to prevent damage to patellar ligament.
• The nail is bend at proximal end so that it does not cause any further damage while passing through the fracture site.
• Proximal and distal locking is from M/L.
• Nail is compressed at 120 degrees to make the nail strong, mechanically.
• Ball is tipped at the distal end to facilitate easy passing without causing posterior cortical penetration.
• We offer odd sizes only in excel 1 variety of nail. Excel1 is available to treat very distal fractures.
• Sizes available
  • Diameter: 8, 9 & 10mm.
  • Length: 280mm to 380mm with a variation of 20mm.
• We supply 4 different types of excel nails which are Excel, Excel 1, Excel AP & Excel D nail.

We export solid and cannulated cylindrical humerus locking nails. Our nails are manufactured from a single, unslotted piece of stainless steel. It has one lateral to medial proximal static locking hole and two antero-posterior distal locking holes. It is widely used for humeral shaft fractures.

Features

• Sizes: Diameter 6mm & 7mm are solid and 8mm is cannulated with lengths ranging from 280mm to 300mm.

We offer best quality stainless steel solid tibial nail, which is used to stabilize fractures of the tibia bone. It is specially intended for open tibia diaphyseal fractures.

Features :

• High energy, unstable closed fracture patterns.
• Comminutes fractures of tibia with small medullary canals.
• Certain for pre and post isthmic fractures.
• Proximal and distal locking hole configurations provide a choice of locking options.
• Both static and dynamic, to accommodate the fracture pattern and soft-tissue injury.

We offer biological, minimally invasive fracture treatment through titanium elastic nail which aims at achieving level of reduction and stabilization that is suitable as per the the age of child. The bio mechanical principal of our titanium elastic nail is based on the symmetrical bracing action of two elastic nails inserted in to the metaphysis, each of which bears against the inner bone at three points to produce following four properties :

• Flexural stability
• Axial stability
• Translational stability
• Rotational stability

All above mentioned properties are necessary to achieve optimal desired results. We supply our titanium elastic nails as per international standard sizes and as per required specifications as well.

We manufacture self-cutting locking bolts for tibia, femur & humerus bone's interlocking nails. Our bolts are devoid of a conventional thread, instead, they have a self-cutting tip which enables it to be applied without tapping a thread. The special low-profile thread brings about stable anchorage of the bolt in the nail.

Our latest low-profile screw head allows its application even in cases of minimal soft-tissue cover.
To engage the opposite cortex securely, the locking bolt, due to its trocar tip is selected 2mm longer than measured.

We introduce advanced locking internal fixation technique (L I F T) which is an evolution of the point contact fixture (PC Fix) with combined advantage of conventional plating and internal – external fixture. Its unique design offers angular & axial stability at the plate / screw interface to improve the quality of fixation especially in comminuted and osteoporotic fracture. Its plating system provides extra stability in maintaining primary and secondary reduction while preserving the periosteal blood supply by lowering the compression generated underneath the plate. Our system is used as conventional plate fixation or internal – external fixator or as a combination of both.

We offer bipolar prosthesis which is highly applicable for the orthopedic treatment of hip injuries. We manufacture the bipolar prosthesis with quality titanium with the varied size ranges of:

• 0105.37-41 DIA -37MM,39MM,41MM
• 0105.43-47 -43MM,45MM,47MM
• 0105.49-53 -49MM,51MM,53MM

We manufacture dieforged and CHS barrel plate which is used for stable fractures and minimal invasive surgery. It reduces the blood loss and leaves minimum operation scars on the body. It is fitted using close technique surgery which is done under the supervision of experienced specialists.

We present top quality substitute for bone graft under the brand name of “ORTOGRAF-LD/PB”. Our bone graft is a substitute material, designed with a composition of approximately 90% hydroxyapatite (HA) & 10% tri calcium phosphate (TCP). It offers porous/ non-ceramic bone formation in a natural way. The biphasic calcium phosphate ceramic granules and performed shapes provides an osteoconductive environment for the new bone formation. The addition of autogenous bone marrow provides osteoinductive and osteogenic properties.

Its features are:

• Sizes of Granules : 250 – 500 Microns, 1 gm / 3 gm.
• Vials: 500 – 1200 microns, 1000 – 2000 microns and 3 gms/ 5 gms.
• Vials Pellet Sizes : 3.0 mm x 2.5 mm 4.8 mm x 3.3mm.

We manufacture systems for bone cutting, drilling and reaming. Our systems or machines are highly useful for an orthopedic surgeon for operating on a patient. The range of machines or systems we offer are :

• 300.01'YI' driving unit which includes motor, stand , foot control, flexible shaft tool kit, oil bottle & special container.
• 300.02'YI' cannulated drill hand piece maximum speed 1200 RPM & with fixed S.S Chuck & Key ( 0-1/4")) (INDIAN).
• 300.08 S.S CHUCK & KEY (0-1/4") (IMPORTED).

DRILLING HAND PIECE :
• Cannulated
• Having S.S. Drill Chuck
• With Easy Handy grip
• Autoclavable
• Having Max. Speed of 1200 RPM

REAMING HAND PIECE :
• Cannulated
• With quick coupling
• Very useful for Intramedullary nailing
• Having Max. Speed of 400 RPM
• Autoclavable

FLEXIBLE SHAFT :

• Easy to maintain
• Having push-pulled type ends
•Autoclavable

SAGGITAL SAW :
• Ideal for THR TKR surgeries
• Supplied with set of 5 blades
• Autoclavable


STAND :
• For Mobility castors
• Can be easily dismentaled and packed
• Made out of non-corrosive metals
• Autoclavable

We present laminar air flow system under the brand name “Yog Air LAF-1000”. It is a ceiling suspended type laminar air flow module. Our laminar air flow system is specially designed and developed to be used in operating rooms/ operation theaters. Our system works on popular and reliable method for filtration of particles and other contaminants from the air, which are harmful and could be decisive. Our laminar air flow system efficiently filters dust particles up to 0.3 microns and also eliminate microorganisms by killing them during the filtration process through U.V. radiation and electrostatic precipitation.