Non Shrink Cementitious Grout

Our clients can also avail from us supreme quality high strength Non Shrink Cementitious Grout YP-Grout NS2A. It is a mix of admixture, special expanding agents, cement and well graded fillers, which is free from corrosion. This grout type is known for its free flowing nature and comes in pre packed ready to use state.

Applications:

• Compressor & masts
• Tracks, base plates & transformers
• Anchor bolts & boiler feed pumps
• Heavy duty grout for machinery
• Crane rails & base plate of turbines
• Generators & bridge bearing pads

Benefits:

• No bleeding & segregation
• Non shrink with controlled expansion
• Dense grout resistance to oil & water penetration
• High early & ultimate strength
• Excellent mechanical & flow properties

 

Action:

• Our range of this product has unique shrinking when restrained fully
• The drying shrinkage cause this product to minimize cracking
• The expansion creates compression in mortar when fully restrained by physical restrain or by reinforcement
• On the drying shrinkage leads to a reduction to relive the effectiveness of shrinkage compensating capacity is made to reduce
• It can be effectively used in sole contact with no corrosion induced when in direct contact with metal

Direction for use:

Surface treatment:

• The surface which is in touch with the mortar must be clean sound and dense
• Any kinds of unsound material and laitance must be cleaned
• With all dust cleaned an evenly scrabbled slightly textured surface is needed
• First of all the surface must be cleaned before it is pre- wetted to dampen the concrete

Mixing:

• Water addition should be exact by + -0.1 lts to get the required result
• Mixed for 2 min by mechanical mixer but before should be added slowly over 1.5 min period

Technical Details:


Setting Time:

• Initial > 15 Min
• Final < 600 Min

Flow Table:

• Flow > 200 Mm