Super Plasticizer

We offer wide range of high quality Superplasticizer YP-Super Plast E5, which is in conformation to IS Code 9103:1999. It is a brown liquid based on sulphonated naphthalene. Suitable for ready mix concrete plants, it is capable of high workability retention up to 2-3 hrs with set retarding effect that helps to produce flowing concrete in hot climates. Further, it assists in long distance transportation of concrete.

Applications:

 

Superplasticizer YP-Super PlastE5is utilized to provide high workability to cement or aggregate mix without adding extra water. It assists in improving retention of high workability without excessive retardation of set. It is suitable to use in high temperature & can be easily transported for long distances.

 

Benefits:

 

•  It provides good cohesive pump able mix at low W/C ratio & moderate cement contents
•  Imparts extreme fluidity to the concrete, which facilitates rapid placement of concrete
•  Helps in controlled & predictable retardation of setting with improved slump retention
•  Useful in production of self compacting concrete
•  Applied in complicated formwork or with congested reinforcement
•  Achieves good compaction without any excessive vibration
•  Reduced permeability, segregation and bleeding
•  helps in increasing compressive and flexural strength
•  It is chloride – free

Directions for Use:

• Normally dispensed at a rate of 0.7-1.5 Liters per 100kg of cement
• It may also be added separately to freshly mixed concrete
• It should be preferably added directly to water prior mixing to the wet aggregate
• However, actual site trials should be conducted for finding exact dosages

(An indicative example: With control slump of 50 mm collapsible slum can be achieved for 15-30 min, 1 hr/170mm, 2 hr/150 mm &3hr120 mm depending on temperature & humidity condition with admixture dosage ofO. 7% of the wt. of cement). Dosage may be increased or decreased depending upon slump required, humidity conditions, temperature & mix design. The above example is just for indication

Note: Example not rephrased.

Technical Data: