Proveides industrial equipments for various industries.
Auxiliary System
We provides absolute solution of auxiliary items in the production of injection molding by integrating all collected technologies, accurate and multifunctional controlling units, and reliable systems. Our range also provides high performance auto feeding system through deliberate cooperation with MORETTO in Italy.
The chuck parts we offer are widely used in various industries and have gained huge acknowledgement for their exclusive features such as durability, dimensional accuracy and others.
The MODU Systems we offer are fully assembled, wired and tested thermally before they are being sent to the clients’ base. This provides faster and expedient method of installing our hot runner systems. These systems eliminate all the problems related to wiring and hot Runner assembly. The range can also help to reduce hold-manufacturing time.
We offer ID Cards with every MODU System that enables the customer to look for elaborate data of their MODU System on our website, at anytime, anywhere in the world.
The ID card contains the following information:
ID No.
Seller name
Heater power T/C
Gate & Heater Structure
Connector & Wiring Diagram
We offer two types of MODU systems, namely:
ECO-MODU System
EZ-MODU System
ECO-MODU System
These systems are assembled by essential parts of hot runner systems that are compiled of nozzle, manifold, connecting system and others. However to assemble eco-MODU System to the mold is very easy.
It is very effectual as well as economical for molding a large product, for instance, car bumper, car instrument panel, pallet and others.
The open nozzle and valve nozzle can be adopted for eco-MODU System.
Both of hydraulic system and pneumatic system are compliant to eco-MODU System.
Around the hydraulic cylinder, special cooling line is installed that forbids degradation of hydraulic oil and guarantees ideal valve pin operation.
Hydraulic or pneumatic cylinder is assembled which is why piping for this cylinder is completely installed, machining of clamping plate for Cylinder area is simple and can be assembled easily.
Lead wires of heaters and thermocouples are confined by special steel cover and full electrical wiring protects from any problem which can happen during your assembly of hot runner system to your mold.
EZ-MODU System
The ez-MODU Systems we offer are simplified MODU System.
Ez-MODU System is composed of manifold block, nozzle, mini holding plate, and connecting system.
Above components are fully assembled and wired and thermally tested.
Wires are fully protected by steel cover.
An ID Card are supplied to customer.
Only YURI nozzle and open nozzle are adoptable for ez-MODU System.
Semi-MODU System
Semi-MODU system is a complete system, which is made of MODU system, nozzle, manifold, clamping plate, spacer plate, holding plate, and wiring system.
Semi-MODU system is suitable for very large products, for instance, car bumpers, car instrument panels, pallets and others.
The sizes of plates are minimized to remove any unnecessary assembly space for YUDO Hot Runner System.
Semi-MODU system is fabricated to minimize time-taking steps more than 50% of existing hot runner system process because most of complicated parts for hot runner system are already assembled in semi-MODU system.
Semi-MODU system is basically assembled in machined pocket of large cavity plate.
Both Open and Valve Nozzles are adoptable for semi-MODU system.
The wiring systems can be easily set up for customers through YUDO's ready-to-install wire kits.
We design and fabricate an extensive range of sequence timers that have gained huge appreciation in the market for their accuracy, durability and high performance. The entire range is available is various models, which can further be customized as per clients’ requirements.
Sequence Timer - SIT700
Features
Power input selection
SIT700 has two different input types, 24V and 220V, to match the power input of solenoid valve installed on mold.
Mode A / Mode B type selection
Mode A: On injection signal received, after delay time, and the gate opens until the end of the injection signal.
Mode B: On injection signal received, after delay time, and the gate opens for opening time setting.
Free injection signal power input
It automatically finds the appropriate power setting either DC 24V, AC, 110V or AC 220V.
Environments
Main Power Input: AC220V / 50-60 Hz
Signal Input Power: DC24V or AC220V
Solenoid Valve Output Power: DC24V (Less than 100mA per Gate) or AC220V (Total less than 1A)
Composition of Control Module (PCB)
Control: Power unit, M.P.U. (Micro Processor Unit), Input/Output unit
Display: Display unit, Switch
Central Processing Unit
S.M.P.S.: To transform input AC220V to DC24V/1A, DC5V/1A
M.P.U.: To control input/output and display
RELAY: Solenoid Valve running element (DC24V or AC220V output)
Sequence Timer - SIT500
Features
SIT500-Controls the Filling Sequence of the mold, by controlling the sequence and time each valve cylinders is operating.
Each valve gate is allowed to be Open during the injection Cycle and is opened for a controlled time period.
Eliminates and / or Changes the position of Weld lines.
Sequence molding can eliminate weld lines and/or move the position of the weld lines to a required area or position on the component.
Reduction of flow marks.
Raising the injection rate at each minimizes flow marks.
Alphine Air Technology We are a company of up to 25 employees, engaged in supplying and manufacturing air washer systems that is used in textile, green house to meet air cooling, tea processor and ventilation requirements.
Manak Engineering Services Supplier and manufacturer of fridge, DC fridge, battery fridge, battery operated fridge, 40 watt fridge, solar fridge, commercial solar fridge, electronic fridge, rechargeable fridge and industrial solar fridge.
Processing...
