A S Traders

Packaging Size	20 Kg
Packaging Type	Bag
Brand	MYK Laticrete
Model Number	307
Material Compatibility	Ceramic, Cement
Color	Grey
Usage/Application	Interior & Wall
Standard	ANSI A118.1T

Description:

Laticrete® 307 Floor And Wall Tile Adhesive Is A Smooth And Creamy Thin-Set Adhesive For Installing Small To Medium Format Ceramic Wall And Floor Tiles In Interior Areas. For Improved Performance And Exterior Use, Fortify With Laticrete® 73 Crete Admix.

 

Features & Benefits

• For fixing ceramic tiles on interior floor & wall

• Ideal for new floor tiling

• Smooth & Creamy

• Single component - Just add water

 

Areas Of Application designed For Interior Floor & Wall Applications suitable Substrates

• Cement Mortar Beds

• Existing Tiling On Floor & Wall Ceramic Tile And Stones (When Mixed With Laticrete® 73 Mortar Admixture)

• Cement Plaster

• Brick Masonry

• Terrazzo

• Single Component, Just Add Water • Interior Applications, Polymer Based • Economical & Easy To Use • Can Be Used Up To Maximum 12mm Bed Thickness • Exceeds Ansi A118.1t Shear Bond Strength Requirements • Complies With En / Iso With A C1t Classification. • Exceeds Is 15477:2019 – Type 1t Adhesive Standards. • Can Be Fortified With Latex Admix For External Use.

Substrates

• Concrete • Concrete Masonry • Cement Mortar Beds • Cement Plaster • Ceramic Tile* • Brick Masonry • Cement Terrazzo • Existing Natural Stone* * Surface To Be Cleaned And Roughened Before Installation Of Tiles Or Stones.

Packaging Size	8Kg
Packaging Type	Bucket
Brand	MYK Laticrete
Color	Off White
Form	Powder

Description:

• It is a two component, modified Polyurethane Adhesive designed for the installation of ceramic tile, vitrified tile, metal tile, glass tile, agglomerates, glass mosaic tile and natural stone on any substrate.
• It is highly elastic, thixotropic and suitable to lay water sensitive tiles & stones on highly expandable, deformable, absorbent and non-absorbent substrates.

Advantages: 

• Highly flexible & Superior bond strength
• Suitable for all the substrates including metal
• Good for vertical applications
• Ideal for agglomerates & moisture sensitive tiles/stones.

Product Grade	C2TE
Application Area	Swimming Pool
Tile Type	Vitrified Tile
Adhesive Class	C2TE
Adhesive Base	Polymer Modified
Packaging Size	20 Kg
Packaging Type	Bag
Brand	MYK Laticrete
Grade Standard	Chemical
Form	Powder
Strength	High
Colour	Grey
Model Number	325 High Flex

Description:

• MODERN FORUMLA FOR BETTER STRENGTH: LATICRETE 325 High Flex is a high-strength, polymer-modified adhesive designed for interior and exterior floor and wall installations. 
• Suitable for various types of tiles, it provides excellent bond strength and durability, even in wet areas like swimming pools and washrooms.
• SWIMMING POOL & WET AREA SPECIALIST: Engineered for underwater applications with excellent water resistance and shock absorption. 
• Perfect for swimming pools, saunas, washrooms, and wet areas where regular adhesives fail due to constant moisture exposure and thermal stress.
• VERSATILE SUBSTRATE & TILE COMPATIBILITY: Bonds effectively to concrete, cement base, ceramic tiles, vitrified tiles, glass mosaics, and natural stones. 
• Works up to 12mm bed thickness for large format tile installations. 
• Avoid engineered stones and mesh-backed tiles without proper preparation.
• MAXIMUM HEIGHT & COVERAGE CAPABILITY: Install tiles up to 50 feet height with superior coverage of 55 sq ft per 20kg bag. 
• High polymer modification provides exceptional bond strength up to 1.65 N/mm² for demanding vertical installations in high-rise buildings and commercial projects.
• PROFESSIONAL GRADE THERMAL SHOCK RESISTANCE: Exceeds IS 15477:2019 Type 3 T standards with superior freeze-thaw cycling performance.
•  Ideal for Indian climate variations, external facades, and high-stress environments where temperature fluctuations cause regular adhesive failures.

Packaging Size	20 Kg
Packaging Type	Bag
Brand	MYK laticrete
Model Number	315 Plus
Grade Standard	Industrial
Strength	High
Chemical Resistance	Water
Colour	Grey

Description:

• A high performance polymer based adhesive to be mixed with water or latex for installing
• medium & large format ceramic tiles, vitrified tiles, marble and stone on floors and walls. Combine with Laticrete 73 Crete Admix for improved performance

Substrate: 

• The surface to be covered with Ceramic tile shall be sound and confirm to good design, rigid, clean and free of dirt, oil, grease, curing compounds, form release agents or loose plaster and paint. For economy the surfaces should be level and true with in: Walls – 3mm in 2.5m Floors – 1.5mm in 1.0m 

Surface Preparation:

• If a plaster/leveling mortar bed is applied, ensure that it is cured for at least 7 days to achieve proper strength before application of tile adhesive for installation of tile
• Ensure the substrate is clean and free from impurities like dust, dirt, debris, oil, grease, curing agents, loose plaster etc
• Dampen the wall before application of thin set adhesive
• Clean the back of tile for any dust or coating

Mixing:
 The products can be mixed by hand or slow speed electric drill mixer (less than 300 rpm). Pour potable clean water in a clean container and then add the powder Latecrete 290 and mix until the mixture becomes creamy and plastic.
Do not over mix. Leave the mix to slake for 5-10 min and remix before use. Mix only sufficient quantity of adhesive for immediate need. 

• Installation:
  • Wet the surface and remove the excess water before applying the adhesive. Ensure the area is shaded from sunlight. The adhesive shall be applied with the flat side of the trowel using a scraping motion to work the material into good contact with the surface to be covered.
  • Additional mortar is then applied with the notched edge of the trowel.
  • When installing large tiles, spread adhesive onto back of tile in addition to trowelling material over surface to be tiled. Select proper type of notched trowel.

  a) Thin Tiles upto size 300 X 300 mm (1'X1'), use a square notched trowel of size 6mm X 6mm to provide a total thickness of 3mm

  b) Large Porcelain Tiles upto 450 X 450 mm with ribs, use a square notched trowel of size 6mm X 6mm and back butter the tiles with the same adhesive to a thickness of 1-1.5mm to provide a total thickness of 4.5mm

  c) Large Porcelain Tiles upto 600 X 600 mm (2'X2') with ribs, use a square notched trowel of size 6mm X 9mm and back butter the tiles with the same adhesive to a thickness of 1-1.5mm to provide a total thickness of 6mm

  • The most important standard to keep in mind is to insure that the piece of tile is completely bedded in the mortar or adhesive with 100% coverage.
  • Rear face of tiles (especially Porcelain tiles) should be cleaned with damp sponge to clean all the dust. Do not saturate in water.
  • Excess mortar on adhesive shall be cleaned from the surface of the stone with wet cloth or sponge while the mortar is fresh.
  Areas of Application 
• Designed for interior floor & wall areas Suitable Substrates
  • Concrete
  • Cement Mortar Beds
  • Existing tiling on floor & wall Ceramic Tiles and Stones (best results when
  • mixed with Laticrete ® 73 Mortar Admixture)
  • Concrete Masonry
  • Cement Plaster
  • Brick Masonry
  • Cement Terrazzo

Packaging Size	1Kg
Form	Liquid
Grade Standard	Chemical
Strength	High
Brand	Myk Laticrete
Product Packaging Type	Box
Surface Of Application	Plastic
Material Compatibility	Metal

Description:

• It is a high-strength, non-sag epoxy adhesive designed for spot bonding tiles and stones on ceiling and vertical surfaces.
• It maintains its non-sag consistency at high temperatures up to 95°F (35°C) and provides a durable permanent bond that withstands shock and vibration without deteriorating over time.
• 310 Spot bonding Adhesive is a two-component, high-strength epoxy adhesive formulated for the spot bonding method of tiles and stones installation on ceiling and vertical surfaces.

Features :

• Fast Permanent Bond- Sets in 45min to 1 hour ensuring quicck and strong adhesion
• Easy to use- 1:1 Mixing ratio by volume symplifies the application process
• Non Staining- Ideal for white and light coloured marbles, other natural stone and tiles

Packaging Size	20 Kg
Packaging Type	Bag
Grade Standard	Chemical
Strength	High
Form	Powder
Brand	MYK Laticrete
Color	Grey
Shelf Life	24 Months

Description:

Multipurpose highly polymer modified and very highly deformable adhesive for installation of very large format tiles on a variety of substrates to accommodate movements.
Exceeds S2 grade of transverse deformation with up to 8mm deformability.
It offers exceptionally good handling properties with good sag and slump resistance.
It can be applied up to 15 mm bed thickness.

Features & Benefits

• For fixing tiles & natural stones on interior & exterior vertical applications
• Fortified with polymers providing high deformability and flexibility
• Superior strength – high shear and tensile adhesion strength
• Single component - Just add wate

Coverage Approx. 55-61 sq.ft. per 20 kg bag with a 1/4" x 1/4" (6mm x 6mm) square notch trowel for a bed of 3mm.

Color Grey & White

Certification

• ANSI: A 118.4ET
• EN: EN12004 / ISO 13007 : C2TES2
• IS 15477:2019: TYPE 4/TS2 ADHESIVE
• VOC: Practically Nil

How to apply

Substrate: The surface to be covered with Ceramic tile shall be sound and confirm to good design, rigid, clean and free of dirt, oil, grease, curing compounds, form release agents or loose plaster and paint. For economy the surfaces should be level and true with in: Walls – 3mm in 2.5m Floors – 1.5mm in 1.0m Surface Preparation:

• If a plaster/leveling mortar bed is applied, ensure that it is cured for at least 7 days to achieve proper strength before application of tile adhesive for installation of tile
• Ensure the substrate is clean and free from impurities like dust, dirt, debris, oil, grease, curing agents, loose plaster etc
• Dampen the wall before application of thin set adhesive
• Clean the back of tile for any dust or coating

Mixing: The products can be mixed by hand or slow speed electric drill mixer (less than 300 rpm). Pour potable clean water in a clean container and then add the powder LATICRETE® 345 Super Flex and mix until the mixture becomes creamy and plastic. Do not over mix. Leave the mix to slake for 5-10 min and remix before use. Mix only sufficient quantity of adhesive for immediate need. Proportion: Approximately 1 bag of LATICRETE® 345 Super Flex with 5-6 ltrs of water. Adjust quantity of liquid to obtain proper consistency. Installation:

• Wet the surface and remove the excess water before applying the adhesive. Ensure the area is shaded from sunlight. The adhesive shall be applied with the flat side of the trowel using a scraping motion to work the material into good contact with the surface to be covered.
• Additional mortar is then applied with the notched edge of the trowel.
• When installing large tiles, spread adhesive onto back of tile in addition to trowelling material over surface to be tiled. Select proper type of notched trowel.

a) Thin Tiles upto size 300 X 300 mm (1'X1'), use a square notched trowel of size 6mm X 6mm to provide a total thickness of 3mm

b) Large Porcelain Tiles upto 450 X 450 mm with ribs, use a square notched trowel of size 6mm X 6mm and back butter the tiles with the same adhesive to a thickness of 1-1.5mm to provide a total thickness of 4.5mm

c) Large Porcelain Tiles upto 600 X 600 mm (2'X2') with ribs, use a square notched trowel of size 6mm X 9mm and back butter the tiles with the same adhesive to a thickness of 1-1.5mm to provide a total thickness of 6mm

• The most important standard to keep in mind is to insure that the piece of tile is completely bedded in the mortar or adhesive with 100% coverage.

Packaging Size	20 Kg
Packaging Type	Bag
Brand	MYK Laticrete
Color	Grey
Form	Powder
Product Surface Of Application	Tiles
Chemical Resistance	Water
Grade Standard	Chemical
Strength	High

Description:

MYK Laticrete 335 Super Flex is a high-strength, polymer-modified thin-set adhesive engineered for demanding interior and exterior installations of ceramic tiles, vitrified tiles, glass mosaic tiles, and natural stones. It delivers exceptional flexibility, bond strength, and weather resistance for challenging applications.

Superior Performance Features:

• Exceeds ANSI A118.4 shear bond strength requirements
• Complies with EN/ISO C2TES1 classification standards
• Meets IS 15477:2019 Type 3 TS1 Adhesive specifications
• Water and shock resistant for wet area installations
• Suitable for swimming pools, saunas, and underwater applications

Versatile Applications: Perfect for large format tiles, natural stones, ceramic and vitrified tiles on floors and walls. Ideal for high-traffic commercial areas, swimming pools, terraces, balconies, and tile-on-tile renovations. Compatible with concrete, cement mortar beds, cement plaster, existing tiles, brick masonry, and cement backer boards.

Installation Guidelines: Mix 20kg powder with 5-6 litres of clean water. Apply with appropriate notched trowel ensuring 95-100% tile back coverage. Open time: 30 minutes. Allow 12-24 hours before grouting depending on environmental conditions.

Product Grade	Admixtures
Application Area	With cement
Tile Type	Vitrified Tile
Adhesive Class	Liquid
Adhesive Base	Chemical
Packaging Size	300Ml
Color	White
Brand	Myk Laticrete
Product Packaging Type	Bottle
Form	Liquid
Water Absorption	High

Description:

• Myk Laticrete Super Set is a macromolecule based polymer concentrate liquid to be mixed with water and used with cement for installing ceramic tile, vitrified tile and natural stone using the traditional cement slurry method of installation. It is very economical and works as a great enhancer for cement slurry bonding with tiles and stones removing the need for water curing.

Features & Benefits:

• Purpose - for enhancing traditional cement slurry
• Easy to use – Liquid form easily dispersible in water
• Polymer based – High adhesion, more open time
• Better performance – Compared to traditional system of only cement slurry tiling
• Special Polymers – Self curing of cement slurry
• Economical – Highly economical to use with many benefits
• Can be used with Grey Cement or White Cement.
• Myk Laticrete Superset is a Macromolecule based Liquid Medium Hydro soluble Aqueous Suspension Concentrate to be diluted with Water prior to use with Portland Cement(s) for Traditional Wet on Wet Bed Method of installing Ceramic, Vitrified Tiles and Natural Stones using Cement Slurry made with Super Set Solution. It is very economical and works as a great enhancer for cement slurry bonding with tiles and stones removing the need for water curing. 

How to apply:

Installation:

• Note: Expansion joints shall be provided through the tile work from all construction or expansion joints in the substrate. Follow ANSI Specification AN-3.8 "Requirements for Expansion Joints" or TCA Detail EJ171 "Expansion Joints". Do not cover expansion joints with leveling bed mortar, tile or ston

Mixing:

• Place clean, potable water into a clean pail. Add Myk Laticrete Superset, and mix thoroughly. Wait for 5 to 10 minutes before mixing this Superset slurry to cement or cement sand mortar. 

Superset Slurry:

• Mix 300ml of Superset with 20 Liters of water. Add this Superset Slurry to Cement and mix by hand or with a slow speed mixer to a smooth, workable consistency. Adjust consistency if necessary. Remix and apply with tools over the leveling bed. 

Installation of Tile or Stone over the Leveling Bed:

• Apply Superset Slurry to the substrate with the flat side of the trowel, pressing firmly to work into surface. Spread as much Superset Slurry as can be covered with tile in 10 minutes. Back butter large tiles (> 12"x12") with Superset Slurry to provide full bedding and firm support. Place tiles into wet, sticky Superset slurry base and beat in using a beating block and rubber mallet to imbed tile and adjust level. 

Application: 

• Can be used for interior and exterior applications on floor.
• This Product is suitable for both the Interior and Exterior Installation of Tiles/Stones on Floors over cement based surface of Concrete and Mortar Beds for Residential and Commercial use.

Suitable Substrates:

• Traditional Wet on Wet system
• Cement Mortar Beds

ADVANTAGES:

• Purpose – Traditional cement slurry additive
• Easy to use – Paste form easily dispersible in water
• Polymer based – High adhesion, more open time and adjustability time.
• Better performance – Compared to traditional system of only cement slurry tiling.
• Special Polymers – Self curing of cement slurry.
• Economical – Highly economical to use with many benefits. 

Packaging Size	20 Kg
Packaging Type	Bag
Brand	MYK laticrete
Compatible Material	Ceramic, Stone
Item Form	Paste
Colour	Grey
Model number	305
Usage	Interior Floor & Wall Tile Installation

Description:

A factory-made bagged cementitious polymer based powder, containing Portland cement and silica sand, it can be mixed with water for installing small and medium size ceramic floor tiles in interior areas using the thinset method of installation.

Features & Benefits :

• For fixing ceramic, vitrified tiles & natural stone on interior floor & wall
• Ideal for tile-on-tile & new floor tiling
• High bond strength
• Single component - Just add water

Product Grade	Sealer
Application Area	Will and Floor
Tile Type	Natural Stones
Adhesive Class	Sealer
Adhesive Base	Sealer
Packaging Size	1L/5L
Usage/Application	For interior & exterior applications of textured natural stones
Form	Liquid
Brand	MYK Laticrete
Shelf Life	12 Months
Product Packaging Type	Can

Description:

• Preserva enhances the natural colour of flamed, tumbled and textured stone surfaces.

• When combined with our range of sealers, it preserves and enhances the original beauty of the unsealed natural stone.

• Preserva functions on surface of the substrates.

• It penetrates into the surface and forms an invisible barrier by allowing vapor to escape.

• It enriches and gives wet look to the natural color of the stone and tile.

• All surfaces treated with Preserva are harder and less slippery.

Product Grade	Sealer
Application Area	Will and floor
Tile Type	Natural Stones
Adhesive Class	Sealer
Adhesive Base	Water based Sealer
Packaging Size	1L/20L
Form	Liquid
Grade Standard	Chemical
Strength	High
Brand	MYK Laticrete
Shelf Life	12 Months

Description:

• Laticrete 190 Sealer is an Invisible, Penetrating Sealer Which Forms an Invisible Water Repellent Coating.
• Applied on Marble, Brick, Limestone and Mortar Joints, It Will Seal the Surface Reducing Staining and Water Absorption.
• It Will Not Change the Color of the Stone and Ceramic Tile.

Uses:
Interior and Exterior Sealer to Protect Installations
Seals Mortar and PlasterReduces the Effect of EfflorescenceCan Be Used as a Grout Release by Treating Ceramic Tile Before the Application of GroutRepels Water and Rain
Features & BenefitsWeather Resistance – Protects Stone, Brick and TileEasy to Apply – No Special Tools RequiredWater- Based, Non-flammableProduct DetailsPackaging 1, 5 Ltr & 20 Ltr  Coverage Approximately 75 Sq. Ft. Per Litre. Color Not Applicable CertificationNot Mentioned  
How to Apply

• Surface Preparation:The Surface to Be Sealed Must Be Clean and Dry. Surface Temperature Should Be Between 45°-85°f (7-30° C). Allow Cements, Stucco and Mortars to Cure 24 Hours Before Applying Sealer. Test on a Small Unobtrusive Area Before Coating Entire Surface.
• Application:Apply the Sealer With a Sponge, Brush or Sprayer. Allow to Penetrate 5 to 10 Minutes.Wipe Off Excess Sealers. Allow Laticrete® 190 Sealer to Cure for 24 Hours. One Application is Sufficient for Most Installations.
• Note: Excess Material Should Be Wiped From the Surface of Marble, Granite, Glazed Tile or Rock When Applied on Horizontal Surfaces. A White Residue May Occur if Excess Material is Allowed to Dry on a Polised Surface.Cleaning – Laticrete® 190 Sealer Cleans Easily With Fresh Water Immediately After Use. Do Not Allow Dried Residue Remain on Polished Surface, Glass or Aluminum.Areas of ApplicationResidential & Commercial, Ideal for Soft and Natural Marble and Porous Tiles