ACME Scientific International

• It consists of two hollow cylinders closed at one end and provided with tight fitting covers at the either end. These cylinders are mounted on a shaft at an angle of 30 degree with the axis of rotation of the shaft. The shaft rotates at 30 -33 rpm through a reduction gear operated by a motor and is provided with a revolution counter. Complete with abrasive change consisting of 12 Nos.hardened steel balls of 48 mm diameter. Suitable for operation on 440 volts, 3 phases, 50 cycles. A.C. supply.
  

• Weight: 800
• Power: Hydraulic,0.75kW
• Voltage: 380v
• Material: Steel

Additional Information:

• Item Code: ACME-311

• It consists of a sheet metal box mounted on legs and fitted with a series of chutes of equal width which discharge the material alternatively in opposite directions into separate pans. The chutes of the riffle are steep enough to allow rapid flowing of the material. The scientific instrument has 6 nos. chutes of 25 mm width and is complete with two receivers.

• Weight: 800
• Power: Hydraulic,0.75kW
• Voltage: 380v
• Material: Steel

Additional Information:

• Item Code: ACME-307

• Consists of MS cylindrical container 150 mm t 0.5mm diameter x 130mm to 140mm high with base plate 200 to 230 mm/ sq x 6mm thick plunger of 148mm + 0.5mm diameter x 100 to 115 mm high. Supplied complete with tamping rod, 16 mm diameter x 600 mm long, one end rounded and 1 no. Metal measure 115 + 0.5 mm diameter x 180 0.5 mm high .

• On special request Aggregate Crushing Value apparatus having 75mm diameter or 300 mm diameter cylinder size can be supplied.

• Weight: 800
• Power: Hydraulic,0.75kW
• Voltage: 380v
• Material: Steel

Additional Information:

• Item Code: ACME-308

ACME -201 Core Cutting/ Core Drilling Machine - Motorized/Engine Driven

Suitable to Cut / Drill cores of Concrete, Rocks, Stones, Tiles other similar material. The machine is suitable for core samples of size upto 150 mm diameter (with the help of thin walled Diamond Bits which are at extra cost. The machine has sturdy base with pillar support in which rack and pinion is provided for adjustment in height and penetration assembly. The leveling screws are provided at the base. For gripping the sample in position suitable grips are provided. A suitable electric motor, standard make is fitted in the machine with cooling arrangement with water. The base frame is also fitted with wheels for ease of transportation.

Dimension approx are as under:

• Height : 1300 mm
• Base : 600 x 1200 mm
• Head travel on rack : 350 mm
• Drill Speeds : 900 RPM for hard samples and 350 rpm for soft samples
• Water Swivel : Built in the machines.
• Suitable for 230 volts AC, single phase.

Accessories :

(1) Thin wall diamond bits.

(2) Core Barrel.

Additional Information:

• Item Code: ACME-201

• The instrument consists of a circular base with two vertical guides. The hammer of weight 13. 75 t 0. 25 kg can be raised to fall freely down the vertical guides.
• The height of fall can be adjusted through 380 + 5 mm. The hammer is provided with a locking arrangement.
• The hammer falls freely on the aggregates in the cylindrical cup by trigger action.
• Cylindrical cup can be clamped firmly to the base and is removable for emptying. Supplied complete with metal measure 75 mm diameter x 50 mm high (for specimen preparation) and tamping rod 230 mm long x 10 mm diameter.

• Weight: 800
• Power: Hydraulic,0.75kW
• Voltage: 380v
• Material: Steel

Additional Information:

• Item Code: ACME-310

• It consists of a sheet metal box mounted on legs and fitted with a series of chutes of equal width which discharge the material alternatively in opposite directions into separate pans. The chutes of the riffle are steep enough to allow rapid flowing of the material. The scientific instrument has 14 nos. Chutes of 13 mm width and is complete with two receivers.

• Weight: 800
• Power: Hydraulic,0.75kW
• Voltage: 380v
• Material: Steel

Additional Information:

• Item Code: ACME-437

• 1 no. Semi-self indicating balance, capacity 5 kg, accuracy 0. 5 gm, provision is made in this balance to suspend density basket under material pan. Balance is supplied with necessary set of weights. This balance is mounted on an angle iron frame stand.
• 1 no. Density basket.
• 1 no. Air tight container of capacity similar to that of density basket.
• 1 no. Water tight container to suspend density basket'
• 1 no. Gi tray of area not less than 650 cm sq.
• 1 no absorbent cloths 75 cm x 45 cm.

• Weight: 800
• Power: Hydraulic,0.75kW
• Voltage: 380v
• Material: Steel

Additional Information:

• Item Code: ACME-309

• Consists of a hard wood base with vertically mounted
• metal studs as specified in the IS 2386 (Pa rt l).

• Weight: 800
• Power: Hydraulic,0.75kW
• Voltage: 380v
• Material: Steel

Additional Information:

• Item Code: ACME-302

• Made of brass with stainless steel wire mesh 6. 3mm size ruggedly constructed, approximately 20 cm diameter x 20 cm high. Complete with handle.

• Weight: 800
• Power: Hydraulic,0.75kW
• Voltage: 380v
• Material: Steel

Additional Information:

• Item Code: ACME-305

• Calibrated cylindrical measures of sheet iron with handles.
• Consists of 3 measures one each 3litres capacity, 15 liters capacity and 30

• Material: Steel

Additional Information:

• Item Code: ACME-303
• Delivery Time: 2 days
• Packaging Details: wooden

• This Industrial Metal Gauges consists of a frame with a sliding panel. The panel has slots of different standard lengths and widths accurately cut.

• Weight: 800
• Power: Hydraulic,0.75kW
• Voltage: 380v
• Material: Steel

Additional Information:

• Item Code: ACME-286

• It consists of a disc rotating about a shaft connected to a reduction gear box coupled to a motor. The disc rotates at 28 -30 rpm. Under the rotating disc is a tray with an outlet to facilitate the removal of sand to conical hoppers are mounted on a bracket fixed to the circular tray An arrangement is made for start and stop the flow of sand. Two holes are provided for mounting two specimens simultaneously. Two containers with weights are supplied to Keep re specimens pressed against the rotating disc. Suitable for operation on 220 volt 50 cycles, AC supply.

• Weight: 800
• Power: Hydraulic,0.75kW
• Voltage: 380v
• Material: Steel

Additional Information:

• Item Code: ACME-312

• Weight: 800
• Power: Hydraulic,0.75kW
• Voltage: 380v
• Material: Steel

Additional Information:

• Item Code: ACME-304