1
Have a requirement?
Get Best Price
Our Products
40 products available
- Impact Value Testing Machine
- Channel Type Load Frame
- Pocket Concrete Penetrometer
- Hand Operated Flexure Testing Machine
- Cone Penetrometer
- Tile Abrasion Testing Machine
- Concrete Test Hammer
- Slump Test Apparatus Is: 7320
- Hand Operated Remote Type Hydraulic Jack
- Cylindrical Moulds
- Demountable Mechanical Strain Gauge
- Cement Sampler
- Kelley Ball Penetration Apparatus ASTM C-360
- Vibrating Machine
- Permeability Apparatus (Three Cell)
- Vee Bee Consistometer
- Standard Spatula
- Concrete Test Rebound Hammer
- Air Entrainment Meter
- Metal Moulding Equipment
- Laboratory Cement Autoclave
- Motorized Laboratory Concrete Mixer
- Longitudinal Compressometer
- Flow Table (Digital)
- Flow Table
- Lateral Extensometer
- Le Chatelier Flask
- Blaine Air Permeability Apparatus
- Vicat Needle Apparatus
- Shrinkage Bar Mould - Three Gang
- Motorized Flow Table
- Gillmore Needle Apparatus ASTM C191
- Jolting Apparatus
- Vicat Needle Apparatus with Dashpot
- Le Chatelier Mould
- Mortar Mixer
- Length Comparator
- Shrinkage Bar Mould - Single Gang
- Vertical Capping Set
Cement Concrete Testing Equipments
Providing you the best range of Impact Value Testing Machine, Channel Type Load Frame, Pocket Concrete Penetrometer, Hand Operated Flexure Testing Machine, Cone Penetrometer and Tile Abrasion Testing Machine with effective & timely delivery.
Interested in this product?
Get Best Quote
| Material | Mild Steel |
| Usage/Application | Laboratory |
| Color | Blue |
| Packaging Type | Wooden Box |
| Display Type | Analog |
| Brand | ACME |
| Grade | Manual |
Aggregate Impact Value Test Apparatus is used for determining the aggregate impact value. The Sturdy Construction consists of a base and support columns to form a rigid framework around the quick release trigger mechanism to ensure an effective free fall of the hammer during test.
Specifications:
- The free fall can be adjusted through 380±5 mm
- Height of The Fall Hammer: 380+-5 mm
- Aggregate impact value test apparatus is supplied complete with a cylindrical measure of 75 mm dia x 50 mm depth
Additional Information:
- Production Capacity: 1000
- Delivery Time: 1 Day
- Packaging Details: Wooden
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Capacity | 1000 KN |
| Usage/Application | Lab |
| Material | Steel |
| Brand | ACME |
| Color | Blue |
| Automation Grade | Manual |
In these load frames "C" channels are used, they are welded at the top as well as bottom and withstand high loads. A Hydraulic jack is fitted at the center of the base of the load frame, over which can be fitted lower platen and spacer block with the help of centering pin. A lead screw passes through the top of the frame. To the lower end of this lead screw is fixed the upper platen with spherical seat for self alignment. The platens are accurately machined, hardened an d polished. The lower platen has concentric grooves to correctly place the specimen.
- Material: Steel
Additional Information:
- Production Capacity: 1000
- Delivery Time: 1 Days
- Packaging Details: wooden Box
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
Pocket Concrete Penetrometer
Rs 900 / PieceGet Latest Price
| Material | Mild Steel |
| Automation Grade | Manual |
| Cylindrical tip | 0.31 cm2 |
| Compressive strength | 5 kg/cm2 |
| Penetrate | Upto 6 mm |
| Usage | Laboratory |
The pocket penetrometer is regarded as a simple tool to aid the engineers in field exploration and in checking and comparing similar types of soil, but it can never be used to obtain foundation design data. This light weight penetrometer is used in the field for classifying cohesive soils in terms of consistency and estimation of approximate unconfined compressive strength and shear strength. In operation, the stainless steel cylindrical tip of 0.31 cm2 area is pushed into soil so as to penetrate up to 6 mm marked point. A cursor on the scale reads directly unconfined compressive strength in kg/cm2 .
Additional Information:
- Item Code: ACME519
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Usage/Application | Laboratory |
| Material | Stainless Steel |
| Size | 150mm x 150mm x 700mm beam |
| Automation Grade | Manual |
| Brand | ACME |
| Power | Hydraulic jack |
| Display Type | Analog |
| Pressure | 0 to 100 KN X 1 KN |
| Beam Size | 100mm x 100mm x500mm |
Flexural tests of concrete beam have their own importance in concrete Road constructions as well as Buildings constructions. Normally concrete beams of sizes 10 cm x 10 cm.x-50 cm or 15 cm x 15 cm x 70 cm are tested for flexural strength.The machine consists of a hand operated load frame. The lower platen has two rollers, the distance between which is adjustable. For 150mm x 150mm x 700mm beam, the center to center distance between the rollers is 600 mm, while it is 400mm for 6eams of size 100 mm x 100 mm x 500 mm. The upper platen has also a pair of rollers whose distance is adjustable. It is 200 mm center to center, for 150 mm x 150 mm x 700 mm size beam and 133 mm for 10 0 mm x 100 mm x 500 mm size beam. A pressure gauge to indicate load is fixed on the load frame. A small pumping unit is attached to the load frame" Total capacity of the machine is 1 00 KN and a 150 mm diameter pressure gauge 0 - 100 KN x 1 KN is fitted on the machine. Since this is a hand operated light weight machine, it is useful for field laboratory also.
Specifications:
- Weight: 800
- Power: Hydraulic,0.75kW
- Voltage: 380v
- Material: Steel
Additional Information:
- Item Code: ACME-609
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Material | Stainless Steel |
| Color | Blue |
| Brand | ACME |
| Display Type | Anolog |
| Rotation | Yes |
| I Deal In | New Only |
| Cone Angle | 35mm long |
| Temperature | 30 |
For determining the consistency of masonry mortar. Consists of a movable bearing rod to which a cone 145 mm. long and 75 mm diameter at a base is fixed. The bearing rod passes freely through a bracket which is provided with release mechanism. A dial graduated in mm with rack and pinion is provided for measuring the penetration. Complete with a conical container 150 mm ID x 180 mm deep and a platform.
Specifications:
- Weight: 800
- Power: Hydraulic,0.75kW
- Voltage: 380v
- Material: Steel
Additional Information:
- Item Code: ACME-615
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Usage/Application | Abrasion Tester |
| Power | Electronic |
| Packaging Type | Wooden Box |
| Frequency | 50/60 Hz |
| Voltage | 280 V |
| Brand | ACME |
| Phase | Single and Three Phase |
| Color | Blue |
| I Deal In | New Only |
| Type | Paver Block Testing Machine |
This is used for determination of resistance to wear for cement concrete flooring tiles. Tiles specimen of size 7.06 cm x 7.06 cm is pressed face -wise under specific load on a grinding path and abrasive powder: is evenly spread on the rotating grinding path and after specific number of revolutions of the grinding disc the second parallel side of the tile is subjected to wear for similar number of rotations. The wear of the tile is measured on a thickness gauge specifically made for the purpose. The machine consists of a disc rotating at a speed of 30 rpm in a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. Load applied is 30 kg. A funnel is fitted to evenly spread abrasive powder on the grinding path. A pre-set counter automatically stops the machine after 22 revolutions. This counter is re adjustable. The machine works on 440volts AC, three phase electrical supply. On request machine to operate on 230V AC. supply can also be supplied
Specifications:
- Weight: 800
- Power: Hydraulic,0.75kW
- Voltage: 380v
- Material: Steel
Additional Information:
- Item Code: ACME-612
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Usage/Application | Field Lab |
| Brand | ACME |
| Grade | Manual |
Concrete Test Hammer is an instrument which is easy to use, for quick and approximate measurement of the resistance to pressure of manufactured concrete products. The principles on which Concrete Test Hammer works are based on the rebound impact of a hammer on a piston which rests against the surface of the concrete products. The Greater the resistance of the concrete, greater is the rebounded impact. By reading this rebound impact on a scale and relating it to curves on graphs supplied with the instrument, the resistance to compression in MPA or PSI can be found, with 20% of actualConsists of a barrel in which is housed a hammer mass attached to an impact spring which slides on a guide bar. A plunger is attached to the guide bar which is pressed against the surface to be tested. As the piston is pressed against the surface to be tested, on reaching the compressive strength, the hammer mass is released and rebounds to a certain extent (according to the strength of the surface) which is indicated by a rider on a calibrated scale. A lock button fixed on the body of the hammer locks the rider in place and the rider can be recared to zero position by using the same button. The equivalent compressive strength can be computed from the chart supplied. Each hammer is calibrated against at standard test hammer, and is suitable for specimen of compressive strengths 100 - 700 kg/cm. The instrument, complete with a grinding stone for polishing the test surface, is supplied in carrying case.
Specifications:
- Weight: 800
- Power: Hydraulic,0.75kW
- Voltage: 380v
- Material: Steel
Additional Information:
- Item Code: ACME-670
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Material | Mild Steel |
| Color | Blue |
It is used for the determination of the consistency of freshly mixed concrete, where the maximum size of the aggregate does not exceed 38 mm. The apparatus consists of one slump cone with handles and foot pieces. The Slump cone has internal dimensions 20 cm diameter at base 10 cm top diameter and 30 cm height. Foot pieces can be fixed to the clamps on the base plate. The base plate has lifting handle for easy transportation. One graduated steel rod 16 mm diameter x 600 mm long, rounded at one end graduated in mms, is also supplied.
Specifications:
- Weight: 10-12 kg
- Material: Steel
Additional Information:
- Item Code: ACME-995
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
Hand Operated Remote Type Hydraulic Jack
Rs 18,000 / PieceGet Latest Price
Minimum Order Quantity: 1 Piece
| Usage/Application | Industrial |
| Capacity | 41-100 Ton |
| Material | Alloy Steel |
| Brand | ACME |
| Type | Double Action Hand Pump |
For applying loads for various tests in field or laboratory. Hydraulic Jack hand operated with separate pumping units. These Jacks are portable and available in various capacities. The pumping unit is connected to the hydraulic jack by means of a flexible connecting pipe 2 meter long. The jack is fitted with lifting handles for easy transportation. The approximate lift of the ram is 90 to 120 mm. The pumping unit is a single plunger type with detachable handle. The unit is fixed on a Channeled base which is fitted with lifting handles. A pressure release valve is provided on the pumping unit. The load is indicated on a 15 cm dial u pressure gauge of appropriate capacity which can be detached from the pump when not in use. The least count of the calibrated dial will be according to the capacity of the gauge (Normally 100 divisions for full capacity).
Specifications:
- Weight: 800
- Power: Hydraulic,0.75kW
- Voltage: 380v
- Material: Steel
Additional Information:
- Item Code: ACME-567
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
For testing concrete cylinders for compressive strength tests.
specifications : the mould is split vertically into two parts. The mean internal diameter is within + 0. 2 mm and height is with in + 1 mm. The ends are machined to +0. 05. The base plate and top plate are machined flat to + 0. 03 mm. Acme-554 mould cylinder cast iron 15 cm diameter x 30 cm height. Acme-555 mould cylinder cast iron 10 cm diameter x 20cm height. - acme-556 mould cylinder cast iron 30 cm diameter x 60 cm height.
Specifications:
specifications : the mould is split vertically into two parts. The mean internal diameter is within + 0. 2 mm and height is with in + 1 mm. The ends are machined to +0. 05. The base plate and top plate are machined flat to + 0. 03 mm. Acme-554 mould cylinder cast iron 15 cm diameter x 30 cm height. Acme-555 mould cylinder cast iron 10 cm diameter x 20cm height. - acme-556 mould cylinder cast iron 30 cm diameter x 60 cm height.
Specifications:
- Weight: 800
- Power: Hydraulic,0.75kW
- Voltage: 380v
- Material: Steel
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
It has become recognized that is Testing Laboratory the best performance can only be obtained if all the springs of a uniform type possess the same mechanical properties. Special testing machines for dealing with tension and Compression Springs of helical pattern are to be made use of the machines of very simple designs used for statically tests on springs cannot be used for Compression and Tensile tests. Spring Testing Machine is an earnest effort in this direction. Machines enable load deflection tests of tension and compression springs to be carried out accurately and quickly.
The Cabinet contains the hydraulic unit the hand wheel of the pump and the release valve handle are outside the cabinet for easy operation. This compact base carrier two fixed upright and four horizontal plates. The first and the third plates with two small uprights from an adjustable frame. The second and the fourth plates are fixed. A square threaded wheel arrangements provided for adjusting the height of the springs. A Bourdon type Gauge is fixed for direct load measurements. One fixed upright is graduated to denote the deflections or tension of the springs for direct readings. A thimble with on arrow mark is provided to facilitate the readings. The machine is capable of accommodating 8" length 1/2" dial. rod up to 4" diameter springs for tension, 6" length 1/2" diameter rod, 4" springs for compression. Scale graduations are made up to 15 cm.
Specifications:
The Cabinet contains the hydraulic unit the hand wheel of the pump and the release valve handle are outside the cabinet for easy operation. This compact base carrier two fixed upright and four horizontal plates. The first and the third plates with two small uprights from an adjustable frame. The second and the fourth plates are fixed. A square threaded wheel arrangements provided for adjusting the height of the springs. A Bourdon type Gauge is fixed for direct load measurements. One fixed upright is graduated to denote the deflections or tension of the springs for direct readings. A thimble with on arrow mark is provided to facilitate the readings. The machine is capable of accommodating 8" length 1/2" dial. rod up to 4" diameter springs for tension, 6" length 1/2" diameter rod, 4" springs for compression. Scale graduations are made up to 15 cm.
Specifications:
- Weight: 800
- Power: Hydraulic,0.75kW
- Voltage: 380v
- Material: Steel
Additional Information:
- Item Code: ACME-536
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
This is a brass tube approximately 53 cm long and 2.8 cm I-D- with a wooden handle Total length approximately 73 cm. The tube has the sharp angular edge which conveniently pierces cement bags. An air hole of approximately 3 mm diameter is drilled on the tube near handle. Total sample collected at one time is 300 cm3 approximately.
Specifications:
Specifications:
- Weight: 800
- Power: Hydraulic,0.75kW
- Voltage: 380v
- Material: Steel
Additional Information:
- Item Code: ACME-501
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
The apparatus is used to determine the work ability of Portland cement concrete. The Kelly Ball test is considered to be simple and much faster than the slump test. Twice the Kelly Ball reading approximately equals the slump. It consists of a cylinder with a ball -shaped bottom and handle, together weighing 15kg. A strip frame, guides the handle and serves as a reference for measuring the depth of penetration. The handle is graduated in MM. Penetration can be recorded to the nearest 0.5mm.
Specifications:
Specifications:
- Weight: 800
- Power: Hydraulic,0.75kW
- Voltage: 380v
- Material: Steel
Additional Information:
- Item Code: ACME-511
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
We also Manufacture Vibrating machine that are used for preparation of Mortar Cube or Moulds in the construction industry and also are used in the determination of compression strength of ordinary and repair hardening Portland Cement and low heat Portland Cement. Our Vibrating Machine Manufactured are equipped with revolving shafts that generate vibrations mounted over coiled springs. Provided with belt guard and a time switch, these vibrating machines are suitable for operation in 230 volts, 50 cycles single phase A.C supply.
Features:
Specifications:
Features:
- Confirmation quality standard: BIS-4031
- Vibration is mounted over coiled springs
- Revolving shafts with an eccentric generate vibrations
- Frequency required: 12000±400 vibrations per minute
- Easy assembling and dismantling of cube mould
- Supplied complete with one cube mould
Specifications:
- Weight: 800
- Power: Hydraulic,0.75kW
- Voltage: 380v
- Material: Steel
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
Concrete moulds are easily cast by using a tamping bar or a vibrating table. However air trapped in cement mortar paste can not be thus removed while casting cement mortar moulds. Easy method is to impart greater vibration of lesser amplitude to the mould while casting. Vibrating Machine is used for the preparation of mortar cubes for the determination of compression strength of ordinary and ra pid hardening Portland cement, low heat Portland cement, Portland blast furnace cement and high alumina cements.
Specifications : The machine consists of a vibrating frame assembly and an electric motor mounted on a sturdy base. The complete frame assembly consists of a vice to hold a 7.06 cm cube mould and two studs threaded at top and a hopper to feed the sample in the mould. This assembly is supported on four springs and has an inbuilt rotating shaft which rotates eccentrically and thus imparts vibrations to the entire frame. A balance weight is an integral bottom part of the frame. The center of gravity of the assembly is brought to the center of the eccentric shaft or within a distance of 25 mm below it. The 6lectric motor drives the shaft of the frame and thus imparts required vibrations to the mould. The frequency of vibration is 12000 +t- 4xovibration per minute. supplied complete with on 7.06 cm cube mould with loose base plate, a time switch 0 - 5 min x 1 min and certificate of vibration from a standard laboratory. Suitable for operation on 230 Volts AC.
Specifications:
Specifications : The machine consists of a vibrating frame assembly and an electric motor mounted on a sturdy base. The complete frame assembly consists of a vice to hold a 7.06 cm cube mould and two studs threaded at top and a hopper to feed the sample in the mould. This assembly is supported on four springs and has an inbuilt rotating shaft which rotates eccentrically and thus imparts vibrations to the entire frame. A balance weight is an integral bottom part of the frame. The center of gravity of the assembly is brought to the center of the eccentric shaft or within a distance of 25 mm below it. The 6lectric motor drives the shaft of the frame and thus imparts required vibrations to the mould. The frequency of vibration is 12000 +t- 4xovibration per minute. supplied complete with on 7.06 cm cube mould with loose base plate, a time switch 0 - 5 min x 1 min and certificate of vibration from a standard laboratory. Suitable for operation on 230 Volts AC.
Specifications:
- Weight: 800
- Power: Hydraulic,0.75kW
- Voltage: 380v
- Material: Steel
Additional Information:
- Item Code: ACME-566
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
We offer high efficiency Permeability Apparatus that are made by from the premium raw materials to add durability and performance. Available in a variety of sizes.
Specifications:
Specifications:
- Weight: 800
- Power: Hydraulic,0.75kW
- Voltage: 380v
- Material: Steel
Additional Information:
- Item Code: ACME-607
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
The testing machine is used for workability as well as consistency of fresh concrete. A slump cone and a graduated rod supplied with the instrument helps the operator to find out slump values and Vibration Table with container and acrylic disc is used to find out workability of concrete expressed in Vee Bee degrees, which is defined as the time in seconds to complete required vibrating at which the fresh concrete flows out sufficiently to come in contract of the entire face of acrylic disc. The equipment consists of : A Vibrating Table size 380 mm long and 260 mm wide resting upon elastic support at a height of about 305 mm above the floor, complete with star /slop Switch, Chord and Plug. A holder is fixed to the base into which a swivel arm is telescoped with funnel and guide sleeve. The swivel arm is also detachable form the Vibrating Table. A graduated rod is fixed on a swivel arm and at its end a plastic disc is screwed. The divisions of scale on the rod record the slump of the concrete in millimeters. Supplied complete with a sheet metal container with lifting handles which can easily be fixed to the Vibrating Table. A slump cone open at both ends with lifting handles and a Tamping rod of size 16 mm diameter and 600 mm long rounded at one end.
Specifications:
Specifications:
- Weight: 800
- Power: Hydraulic,0.75kW
- Voltage: 380v
- Material: Steel
Additional Information:
- Item Code: ACME-513
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
This is for use while casting a cement briquette.The standard spatula consists of a steel blade, of a special shape. A wooden handle is fixed to the stem of blade. The weight does not exceed 340 gm.
Specifications:
Specifications:
- Weight: 800
- Power: Hydraulic,0.75kW
- Voltage: 380v
- Material: Steel
Additional Information:
- Item Code: ACME-533
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
The concrete test hammer is an instrument which is easy to use, for quick and approximate measurement of the resistance to pressure of manufactured concrete products. The principles on which it works are based on the rebound impact of a hammer on a piston which rests against the surface of the concrete products. The Greater the resistance of the concrete, greater is the rebounded impact. By reading this rebound impact on a scale and relating it to curves on graphs supplied with the instrument, the resistance to compression in MPA or PSI can be found, with +/- 2O% Of actual. Consists of a barrel in which is housed a hammer mass attached to an impact spring which slides on a guide bar. A plunger is attached to t he guide bar which is pressed against the surface to be tested. As the piston is pressed against the surface to be tested, on reaching the compressive strength, the hammer mass is released and rebounds to a certain extent (according to the strength of the surface)which is indicated by a rider on a calibrated scale. A lock button fixed on the body of the hammer locks the rider in place and the rider can be recared to zero position by using the same button. The equivalent compressive strength can be computed from the chart supplied. Each hammer is calibrated against a standard test hammer; and is suitable for specimen of compressive strengths 100 - 700 kg/cm The instrument, complete with a grinding stone for polishing the test surface, is supplied in carrying case.
Specifications:
Specifications:
- Weight: 800
- Power: Hydraulic,0.75kW
- Voltage: 380v
- Material: Steel
Additional Information:
- Item Code: ACME-605
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
As Entrainment of air in limited percentage in proves durability of concrete and very low percentages deteriorate it, measurement of air entrapped in freshly mixed concrete becomes important. The use of chemical additives to increase workability of concrete often requires an air content check to be made. Air Entrainment meters are used to determine air entrained in freshly mixed concrete by pressure method. The apparatus consists of a pressure tight flanged cylindrical measuring bowl of 0.005 cubic meter capacity for maximum size of aggregate 38 mm. The bowl is fitted with a removable flanged conical cover assembly with the help of a seal. The conical cover has an air valve and a pet cock for bleeding off the water. A transparent cylindrical stand pipe which is graduated in air content is fixed to the conical cover assembly.
Specifications:
Specifications:
- Weight: 800
- Power: Hydraulic,0.75kW
- Voltage: 380v
- Material: Steel
Additional Information:
- Item Code: ACME-515
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
We are engaged in manufacturing Metal Moulding Equipment in various technical specifications. Our Metal Moulding Equipment is available in several material of construction such as Cast Iron, Steel Cylinder, and Steel Beam.
Standards available with us :
Features :
Applications:
Sizes Available in Cube Mould:
Sizes Available in Cylinder Mould :
Specifications:
Standards available with us :
- IS
- BS1881 : DIN 51229
- BS 1881 : Part 110
Features :
- Compact Designs
- Low Maintenance
- Durable
- Consistent Performance
- Anti-corrosive
- Cost effective
Applications:
- Steel Industry
- Construction Industry
Sizes Available in Cube Mould:
- 150mm x 150mm side
- 100mm x 100mm side
Sizes Available in Cylinder Mould :
- 100mm diameter x 200mm (H)
- 150mm diameter x 300mm (H)
- 160mm diameter x 320mm (H)
- 150mm diameter x 300mm (H)
- 160mm diameter x 320mm (H)
- 100mm diameter x 200mm (H)
Specifications:
- Weight: 800
- Power: Hydraulic,0.75kW
- Voltage: 380v
- Material: Steel
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
Laboratory Cement Autoclave
Rs 48,000 / PieceGet Latest Price
| Insulation Wall | Double Wall |
| Automation Grade | Semi Automatic |
| Usage/Application | Laboratory |
| Shape | Vertical |
| Power Consumption | 3 KW |
| Warranty | 1 year |
ACME -527 Laboratory Cement Autoclave With Stainless Steel Chamber 21 Kg/cm. Sq. Pressure As Per
The Portable Autoclave is suitable for conducting accelerated soundness tests on cements or the autoclave expansion test requiring constant steam pressure with the correspondent It consists of a stainless steel cylinder with a welded heat insulated over, mounted on a sturdy supporting frame, enclosed in a heat insulated metal housing, attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge, power switches and pilot lights for controlling the electric heating units. Inside Chamber Dimensions- 10.5 cm diameter x 40.5 cm height suitable for operation on 230 V, 50 Hz, Single Phase, AC supply. Supplied complete with Test bar holder, special rack to hold specimens above water level in the autoclave and in a vertical position to expose them in the same manner. Note: Ordinary Laboratory Cement Autoclave with Mild Steel Chambers are also available.
Specifications:
- Material: S.S
Additional Information:
- Item Code: ACME-527
- Packaging Details: Wooden
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Automation Grade | Automatic |
| Usage/Application | Construction |
| Color | Blue |
| Is It Portable | Portable |
| I Deal In | New Only |
| Phase | Single Phase |
Concrete mixer laboratory type, electrically operated. Designed to remove the burden some work of hand mixing. Uniform thoroughly mixed batches can be produced. The counter balanced drum is easy to tilt 1.112 to 2 cu. ft.mix. The total drum volume is however 3 cu. ft. Mounted on a sturdy rubber tyred stand, and the drum is mounted for end discharge and equipped with end towing pole. Equipped with 1/2h.p. electric motor. Suitable for operation on 220/230 volts A.C. single phase.
Specifications:
- Material: Steel
Additional Information:
- Item Code: ACME-446
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Usage/Application | Lab |
| Brand | ACME |
| Shape | Round |
| Automation Type | Manual |
| Color | Blue |
It is designed for finding out the deformation and strains on 15 cm diameter and 30 Cm high cement concrete cylinders when subjected to compressive loads. Consists of a frame with a bottom ring and a top ring with tightening screws to firmly clamp the compressometer over the cylinder. A dial gauge .002 mm x 12 mm is mounted on the upper ring and the tip of the dial gauge rests on an anvil. The zero of the dial gauge can be set by adjusting the anvil screw. Supplied in a wooden carrying case.
Specifications:
- Material: Aluminum
Additional Information:
- Item Code: ACME-538
- Delivery Time: 3 Days
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Application Media | Oil |
| Usage/Application | Automotive |
| Material | Brass |
| Color | Blue |
| Flow Range | 0 Lt/ Hr - 48M3/ Hr |
| Operating Temperature | Upto 150 Degree C |
It is used for determining the flow of cement concrete.
Specifications : Consists of a steel table top 76.2 cm (30 inch dia.), finely machined. The integral cast ribs are designed for support and strength" The stand is fabricated out of cast iron and is of study construction. Holes for mounting in foundations are drilled in the base plate. The ground and hardened steel cam is designed to lift and drop the table by 12.5 mm. The hand wheel makes it simple to operate the table. Supplied with one conical mould with handles, 12 cm height having 17 cm. top internal diameter and 25 cm ID at the base. Complete with a tamping rod 1 6 mm dia x 600 mm long one end rounded.
Specifications:
- Weight: 800
- Power: Hydraulic,0.75kW
- Voltage: 380v
- Material: Steel
Additional Information:
- Item Code: ACME-521
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Material | Brass |
This is used for determining the workability of building limes .The flow table consists of a 30 cm diameter ground and polished steel plate with three inscribed annular circles. 7, 11 and 19 cm. diameter. The table top is arranged for a free fall of 1 2.5
mm by a cam action. Supplied complete with one brass conical mould, 65 mm ID at base and 40 mm ID at top, height of the mould 90 mm.
Specifications:
Brass
Additional Information:
- Item Code: ACME-520
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Color | Blue |
| Brand | ACME |
This is for determining the lateral extension of 15 cms.dia x 30 cm high cement concrete cylinders while testing them under compression. The unit consists of two movable frames pivoted at one end. The extensometer is fixed to the specimen with the help of tightening screws. The lateral extension is indicated on a dial gauge of .002 mm x 12 mm travel. The extension is magnified 2.5 times and the dial gauge readings are to be divided by 2.5 to get the exact readings. A spacer strip is provided to initially set the dial gauge, and can be remained after initial setting. Supplied in a wooden carrying case.
Specifications:
- Material:Brass
Additional Information:
- Item Code: ACME-537
- Delivery Time: 7 Days
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Material | Glass |
| Brand | Acme |
Used for finding specific gravity of hydraulic cement. Made of borosil glass. The flask is 243 mm in total height, having a bulb of 90 mm diameter of 250 ml approximate capacity. The long neck of the flask has at top a funnel of 50 mm diameter The neck has over-all 11 mm id upper portion is graduated from 18 ml to 24 ml with 1 ml graduation. Just at the bottom of the neck 1 ml capacity is marked in between there is 17 ml capacity bulb.
Specifications:
- Material: Glass
Additional Information:
- Item Code: ACME-509
- Delivery Time: 1 Day
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Brand | ACME |
| Material | Glass and brass |
Blaines Air Permeability Apparatus. The apparatus is used for determining the fineness of cement in terms of specific surface expressed as total surface area in square centimeters per gram of cement. This is a variable flow type air permeameter.
Additional Information:
- Item Code: ACME-352
- Delivery Time: 2 days
- Packaging Details: Wooden
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Material | Cast Iron |
| Brand | ACME |
This instrument is used for determining the normal consistency and setting times of cement and 'A' Class limes. The apparatus consists of a metallic frame bearing a freely movable rod with a cap at top, one Vicat mould, split type and glass base plate and one set of needles one each initial needle, final needle and consistency plunger.
Specifications:
- Weight: 800
- Power: Hydraulic,0.75kW
- Voltage: 380v
- Material: Steel
Additional Information:
- Item Code: ACME-675
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
Shrinkage Bar Mould It is made of mild steel or brass. Faces Size machined flat. Complete with base plate and stainless steel smooth reference points.
Specifications:
Specifications:
- Weight: 800
- Power: Hydraulic,0.75kW
- Voltage: 380v
- Material: Steel
Additional Information:
- Item Code: ACME-531
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Material | Brass |
Specifications: Same as above but electrically operated, to raise and drop the table top, approx. 15 times in 15 seconds. Suitable for operation on 230 Volts, 50 cycles, AC supply.
Specifications:
- Weight: 800
- Power: Hydraulic,0.75kW
- Voltage: 380v
- Material: Steel
Additional Information:
- Item Code: ACME-522
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
This instrument is used for determining the time setting of hydraulic cement. A base with a vertical shaft and two horizontal arms. The lower arm is Adjustable for height. 1 No. Initial needle 1/12 inch dia1l4lb.wt. 1 No. Final Needle 1/12 inch diameter 1 lb. wt. 1 No. Glass base plate.
Specifications:
Specifications:
- Weight: 800
- Power: Hydraulic,0.75kW
- Voltage: 380v
- Material: Steel
Additional Information:
- Item Code: ACME-510
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
For making standard rectangular specimens 40 x 40 x 160 mm. of portland and pozzolana cement mortar for determining the transverse strength. The jolting apparatus consists of a rectangular table rigidly connected by two support arms to a spindle at a horizontal distance of 800 mm from the center of the table. There is a projecting lug with a plane face on the lower face of the table beneath which is a stop with a rounded upper surface. The table can be raised and allowed to fall freely on the stop by a cam which is connected to a motor and gear box through a V-belt and pulleys. The cam rotates at a rate of 60 rev/min. A stroke counter fitted with micro-switch is provided which stops the machine after 60 jolted.Locating pips are provided for mounting the mould compartments on the table. The mould surmounted by the hopper can be clamped rigidly to the table. Supplied complete with mould and hopper. Suitable for operation on 230 Volts, single phase, AC supply.
Spares and Accessories:
Specifications:
Spares and Accessories:
- Steel mould with base plate having three compartments
- each having 40 mm x 40 mm x 160 mm. internal
- dimensions. Apparatus for demoulding the specimen.
Specifications:
- Weight: 800
- Power: Hydraulic,0.75kW
- Voltage: 380v
- Material: Steel
Additional Information:
- Item Code: ACME-543
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
Specifications:
- Weight: 800
- Power: Hydraulic,0.75kW
- Voltage: 380v
- Material: Steel
Additional Information:
- Item Code: ACME-505
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
It is used for the determination of soundness by expansion method of ordinary and rapid hardening Portland cement, low heat Portland cement and class A lines. It consists of a small split cylinder forming a mould, On either side of the split cylinder, two parallel indicating arms with pointed ends are attached. Supplied complete with two glass plates and a lead weight.
Specifications:
Specifications:
- Weight: 800
- Power: Hydraulic,0.75kW
- Voltage: 380v
- Material: Steel
Additional Information:
- Item Code: ACME-506
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
It is used for mixing cement pastes, mortars and pozzolanas. The apparatus consists of an epicyclical type stainless steel paddle imparting both planetary and revolving motion, by means of gears. it has two speeds of 140 + 5 rpm and 285 + 10 rpm. with planetary motions of approximately 62 rpm + 5 rpm and 125 rpm +- 10 rpm respectively. The stand of the mixer has arrangement to raise or lower the bowl. Complete with stainless steel bowl of about six liters capacity. Suitable for operation on 230 volts, 50 cycles, single phase, AC supply.
Specifications:
Specifications:
- Weight: 800
- Power: Hydraulic,0.75kW
- Voltage: 380v
- Material: Steel
Additional Information:
- Item Code: ACME-523
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
It is used to measure the drying shrinkage of concrete autoclave expansion of Portland cement and potential expansive reactivity of cement aggregate combinations in mortar bars during storage, on self drying. The Dual Length Comparator consists of a channeled base over which two vertical pillars are fixe. An adjustable cross plate is at the top. A dial gauge, reading to .002 mm x 12 mm. can be fixed to the top cross plate. The plunger end of the dial gauge can be located upon a 6.5 mm diameter ball or other reference point cemented in the specimen. On the base there is a similar recessed seating in which can be placed a second ball or reference point in the specimen. Complete with a stainless steel standard bar with insulated grip and with 6.5 mm diameter balls mounted in the ends. The unit can be supplied with a .0001 inch x 1/2 inch dial gauge at extra cost if indicated at the time of placing the order.
Specifications:
Specifications:
- Weight: 800
- Power: Hydraulic,0.75kW
- Voltage: 380v
- Material: Steel
Additional Information:
- Item Code: ACME-539
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
The mould is used for casting specimens of cement aggregate combinations for measuring the potential expansive alkali reactivity. Specifications: The mould, which has 25 mm x 25 mm x 250 mm. effective gauge length is made of mild steel and has accurately machined faces. The parts of the moulds are tight fitting and firmly held together when assembled. Supplied complete with base plate and four stainless steel smooth reference pins.
Specifications:
Specifications:
- Weight: 800
- Power: Hydraulic,0.75kW
- Voltage: 380v
- Material: Steel
Additional Information:
- Item Code: ACME-529
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
For capping compression cylinder specimens. This apparatus can be used both in the laboratory and in the field. The specimens capped in this apparatus have plane parallel faces. For cylinders 150 mm diameter x 300 mm long. Consists of a base with an upright. The upright serves as a guide for positioning the capping plate and the cylinder. The 19 mm thick capping plate is machined accurately. There is a recess in the plate for keeping the molten capping compound and to position cylinder. Complete with cylinder carrier and ladle.
Specifications:
Specifications:
- Weight: 800
- Power: Hydraulic,0.75kW
- Voltage: 380v
- Material: Steel
Additional Information:
- Item Code: ACME-563
View Complete Details
Yes, I am interested!
Explore more categories
Tell us what you need, and we’ll help you get quotes
Tell us what you
need
need
Receive seller
details
details
Seal the deal
Pay with IndiaMART