ACME Scientific International

• 40mm Mild steel sample splitter with removal hopper,12 equal series of chutes, and stainless pans
• 40mm r Mild Steel stainless sample splitter with removal hopper,12 equal series of chutes, and stainless pan
• 30mm Mild Steel sample splitter with removal hopper,12 equal series of chutes, and stainless pan
• 25mm Mild Steel Sample splitter with removal hopper,12 equal series of chutes, and stainless pan
• 20mm Mild Steel Sample splitter with removal hopper,12 equal series of chutes, and stainless pan
• 15 mm Mild Steel Sample splitter with removal hopper,12 equal series of chutes, and stainless pan
• 10mm r Mild steel sample splitter with removal hopper,12 equal series of chutes, and stainless pan
• 5mm Mild Steel sample splitter with removal hopper,12 equal series of chutes, and stainless pan

Additional Information:

• Item Code: ACME437

Type Digital Display Building Material Hydraulic Compression Testing Machine

Application used for testing the pressure test of a pressure concrete building material and other metal materials.

Details

Maximum load 1000KN

Measuring range of testing force 4%-100%FS

Accuracy of testing force +/-1

Upper and lower pressure plate size 25mm

Distance between upper and lower plate min 320mm

Maximum piston stroke25mm

Power supply 415V+/-10% ,50Hz

Approx overall dimension 900x500x1400

Compression testing machine electrically/hydraulically operated. The machine should embody a hydraulic system designed to meet the requirement for compression tests on concrete cubes up to (5x5x5cm), (7x7x7cm),(10x10x10cm), and also concrete cylinders up to 10x20cm,15x30cm height.

Loading Unit The hydraulic jack should be fixed to the base .the upper platen should have self aligning action and is attached to a screw , which passes through the cross -head plate, and can be raised or lowered for initial clearance adjustment.

A dust cover is provided on the piston to prevent any dust from going into the cylinder.

A spacer with a certain locating pin is provided to test small specimen .The lower and upper platens of the machine should be hardened and polished and electrical units should be of double plunger type and s driven by a 240/440 volts 50 cycles electric motor. The pumping unit should be fitted with min 20cm dia dial hydraulic pressure gauge with 100 divisions.

Tested proving ring .A max red pointer is provided to facilitate taking reading after failure of specimen.

The machine f fitted with a hand wheel control which enables the rate or application of load to be varied,

The machine s equipped with facilities for hand pumping unit should be fixed with a micro - switch off the motor automatically as the load on the, machine approaches the rated capacity.

Additional Information:

• Item Code: ACME-651

Electronic Direct Shear Apparatus, 12 Speed, Motorised with Microprocessor Based electronic unit, displacement sensors and load cell with micro-processor display system are provided. Total loading capacity of the apparatus is 8 kg/cm2. It is provided with standard 60mm shear box assembly. Set of weights to give a normal stress up to 3 kg/cm2 on the specimen through lever is provided as standard. Additional weights are to be ordered separately.

Electronic System

* Load cell universal (universal)2kN - 1 No.

* LVDT + 20 mm - 2 No.

Digital display /conditioning unit

The Three-channel micro processor based signal conditioning unit is the three-function system. The functions are load, horizontal displacement and vertical displacement directly indicated in their respective engineering units. The system receives the output signal from the sensors i.e. Load cell and Displacement Sensors attached to the Direct shear Test apparatus. It consists of the power supply, signal conditioning cards and processing card. The signal-conditioning card amplifies the signal of each sensor and transfers it to processing card. The processing card consists of a Micro controller that stores the reading of each sensor and finally transfers it to computer. The data of all three channels of Direct Shear Test can be transferred to computer and can be monitored online. The Unit also provides the facility of online monitoring of data through LCD display.

Broadly the following facilities are incorporated in the system:-

i) Three independent channels. Load (N), Horizontal Displacement(mm), Vertical Displacement (mm)

ii) Independent display for each channel simultaneously.

iii) Print interval / data transfer interval is programmable (between 10 second to 1 hour)

iv) Automatic data saving on stop button.

v) 25 set of results can be stored in the electronic unit.. Sample number can be programmed

vi) Online date and time of test is stored along with the data. On line (while the test is in progress) data transfer to the computer which is stored in the computer with a particular file name ( through RS232).

vii) Data can be downloaded to the computer after the test, which is stored even after the power is off

. viii) Without computer, test data can be printed through printer port provided in the electronic unit.

(Computer is not part of the system)

Additional Information:

• Item Code: ACME-786
• Production Capacity: 1000
• Delivery Time: 1 Week
• Packaging Details: Wooden Box

• Loading Unit having a normal load capacity of 3 kg/cm2 through lever and shearing load capacity upto 5000 kg maximum.
• Shear box assembly in two halves, complete with two guide pins and three spacing screws.
• Shear box housing, complete with two ball roller strips.
• Two perforated gripper plates.
• Two plain gripper plates.
• Two plain grid plates, one for top and one for bottom.
• Two perforated grid plates one for top and one bottom.
• One base plate.
• One loading pad with lifting handles.
• One set of slotted weights to give a maximum normal stress intensity of 3 kg/cm2 on the specimen through lever system

• Dial Gauge 0.01 x 25 mm for consolidation measurement.
• Dial Gauge 0.01 x 50 mm for horizontal strain measurement.
• 3000 kg Proving Ring for shear load measurement.
• 5000 kg Proving Ring for shear load measurement.
• Perforated gripper plates set of two.
• Plain Gripper plates set of two.
• Grid plates plain set of two.
• Grid plates perforated set of two

Additional Information:

• Item Code: ACME718

Additional Information:

• Item Code: ACME-965

Additional Information:

• Item Code: ACME307

• Strong galvanized steel structure chemical resistant
• Internal robust stainless steel racks
• High capacity
• Humidity from 95% to saturation by water nebulizers
• Connectable to water refrigerator for better temperature control
• Power 1700 W approx.
• Temperature 60C,power240V/50Hz dimensions minimum 1500x700x1600 mm
• Stainless steel and GI made, complete with precision digital thermostat and at least four robust shelves

• Dia of blade : 250/300 mm
• Dia. of polishing disc : 200 mm
• Operating HP : 2
• Operated on : 440 Volts, 3 phase (220 volts Optional) Water Flow valve :
• Provided RPM of blade : 2200 (approx.)

Additional Information:

• Item Code: ACME-192

• The Lightweight Dynamic Cone Penetrometer is used to establish the thickness of different strata, when testing compaction works and to determine the relative density of fills and naturally deposited non-cohesive soils.
• If the ground is not too compacted, penetration tests can be carried out up to about 8 to 12 metres.

• 10 Kg drop rammer, 500 mm. fall and anvil
• 11 1 metre x 22mm diameter sounding rods, complete with threaded collar and guiding rod
• Grooved rod to extract samples
• 2 drive points 90 Degree, with 5 cm2 and 10 cm2 surface
• Lifting device for sounding rod, accessories
• Carrying case

• Sturdy design
• Superior functionality
• Easy maintenance

Additional Information:

• Item Code: ACME715

Concrete water permeability apparatus at 3-4cells

This fully automatic apparatus, cubic concrete testspecimens max.150 mm side and cylinder specimens max.160 mm diameter. The specimens are submitted to hydrostatic stress for a pre-set period. The water permeated through the test specimen is directly collected and measured into a graduated cylinder. to determine the permeability coefficient in cm/sec.(Darcy coefficient)by the attached formula. metallic frame holding 3-4cells which are hot-galvanized for anti-corrosion protection. And connection to pressure control manometer. A re-chargeable compensation plenum chamber is included as part of the test. The pressure is adjustable from 0 to 30 bar (0-20 bar for mod. C431), supply automatic pump of variable supply,to achieve the most suitable installation for the specimen under test. Water supply

Seal pressure obtained through special and practical seal devices which maintain and simplify the use of the machine. It is possible to use one or more cells together. The specimen's sealing system.

Supplied complete with 3-4 cells,3-4 graduated cylinders,epoxy resin and accessories.

Include sealing devices , Sealing device, complete with rubber latex packing which is between the two hot-galvanized steel collars. Complete with bolts for cylinders dia. 160 mm.and Sealing device, complete with rubber latex packing which is between the two hot-galvanized steel collars. Complete with bolts for cubes 150 mm side. Spare parts:epoxy resin. Manuals Training.

Power supply: Single phase 240 V/ Ac
Dimensions: 2500x500x1300 mm
Weight: 300 Kg

Additional Information:

• Item Code: ACME451

Additional Information:

• Item Code: ACME-652

Additional Information:

• Item Code: ACME670
• Production Capacity: 200
• Delivery Time: 2 Days
• Packaging Details: Wooden Box

A complete set of seven sieves, with slot sizes4.9x30mm,7.2x40mm,10.2 x50mm,14.4x60mm,19.7x80mm,26.3x90mm,33.9x100mm,with dimensions; 300x220x80mm,320x240x80mm,300x220x80mm,360x260x80mm,390x280x80mm,420x300x80mm,470x320x80mm respectively made mild steel.

Used to determine if aggregate particles are to be considered flaky, i.e. their thickness is less than 0.6 of their nominal size. Each sieve is made from heavy gauge steel.

• Weight approx. 2.4 kg per unit, 15 kg complete set

To evaluate the thickness and the elongation index of the aggregates particles, thickness gauge code 47-D0540 and length gauge code 47-D0541 can be used.

Additional Information:

• Item Code: ACME-486
• Delivery Time: 1 week
• Packaging Details: Wooden

• SCOPE This Interplant Standard specifies the single wheelbarrow, 150KG capacity
• Body -Sheets hot rolled carbon steer sheet and strip (third revision )'
• Finish - Immediately after fabrication the wheelbarrow shall be thoroughly cleaned and painted with two coats of black bituminous paint, brushing, bituminous, black, lead free, acid alkali and heat resistant (third revision)'.
• Marking - Each wheelbarrow shall be marked with the following:
• Name of the manufacturer or his trade-mark
• Capacity
• Unloaded weight of the wheelbarrow
• The year of manufacture, and e) Number of this standard

• Used to conduct slump tests on fresh concrete at the job site.
• The compact base unit has an integrated handle with drilled hole to hold the tamping rod in transit.
• The set includes Slump Cone, Tamping Rod, Slump Test Base and Round Mouth Scoop.
• Base plate ,Rule tamping rod , scope and other accessories

Additional Information:

• Item Code: ACME995

• Low maintenance
• Digital Temperature controller
• Resistance to corrosion

Additional Information:

• Item Code: ACME669

• 30 Tone 300 KN Hydraulic jack with separate pumping unit fixed to it a 0 -300 KN. x 1.5 KN
• Pressure gauge and flexible metal pipe 5 meter long.
• Special ball and socket arrangement between the jack and the bearing plate
• Extension rod 12mm. diameter x 25cm. long for taking dial gauge readings
• Magnetic base with female thread on top for holding extension rod
• Top end plate, 50mm, diameter with male thread for fitting onto the extension rods
• Positioning the dial gauge plunger -
• Column 15cm. diax25cm long with flanges complete with four bolts and nuts
• Column 15cm. diax50cm long with flanges com plete with four bolts and nuts
• Bridge support of welded steel angle construction, 5 meter span and stands approximately
• 30cm, high. Fitted with two quick release clamps for positioning and holding the dial bracket
• Plane MS Plate 60cms x 60cms. square x 25mm thick
• Plane MS Plate 45cms x 45cms. square x 25mm thick

Additional Information:

• Item Code: ACME699

Additional Information:

• Item Code: ACME-218

Additional Information:

• Item Code: ACME-642

• Readability: 0.1/1g , 240V : 8-15 Kg
• High contrast LCD displays weight and text messages to guide you every step of the way
• AC powered or battery operated so you can take your lab with you
• Large stainless steel weighing pans

Additional Information:

• Item Code: ACME-645

Additional Information:

• Item Code: ACME-553

Additional Information:

• Item Code: ACME675

• Tip dimensions mm dia. 28x250mm long
• Flexible shaft 2000mm
• Electric operated
• Current specifications 220-230V, 50-60Hz, 1 ph
• Power 500W

Additional Information:

• Item Code: ACME-654

• Bending speed 10-20 r/min
• Power 4 kw
• Motor Rotation 1440 r/min
• Voltage 440 v
• Size Steel bar 8-40 mm

Additional Information:

• Item Code: ACME-442

• Overall dimensions 220x170x470 mm
• Weight approx. 8 kg

Additional Information:

• Item Code: ACME352

• Heavy main shaft and Japanese bearing guaranteed machine working life
• Polythene water tank is easy to remove and 40L big volume guaranteed enough water to blades
• Height adjustable handle with comfortable grip handles guaranteed cutting depth consistently
• Lift-up and articulated blades protector is design for blades replacement easily
• Down cutting system for improved working efficiency

Additional Information:

• Item Code: ACME-362

Additional Information:

• Item Code: ACME753

with four self locking wheels and of loading surface area 600x800mm stainless steel with a push/pull handle capacity 250kg

Additional Information:

• Item Code: ACME-587

• Density bottle of 100 ml with capillary vent leak proof stopper.
• 100ml density with capillary vent stoppers

Additional Information:

• Item Code: ACME-127

• - max. Temperature: 250 DegreeC.
• - Thermostat range 250 DegreeC with fluid expansion probe
• - insulation class: 1
• - two fuses to ensure electrical protection
• - bipolar main luminous switch
• - pilot light to signal active status of the heating element

Additional Information:

• Item Code: ACME107

Additional Information:

• Item Code: ACME-504

Additional Information:

• Item Code: ACME-604

• Diameter of the rammer - 50mm
• Weight of the rammer - 2.60 kg for light compaction and 4.89 kg for heavy compaction.
• Height of fall of rammer - 310 mm and 450 mm
• Wired for - 220 volts, single Phase, 50 Hz supply

Additional Information:

• Item Code: ACME-659

Product details

Display -Digital

Application -Industrial And Shops

Power Source -Electric

Details
A platform scale series for complete industrial & heavy duty application based on microprocessor based technology with flexible indicator and stand, (Optional - Attached Stand). All Models have built in multi function facilities such as listed, extra zero facility, sensitivity adjustment for long term stability, full tare facility, auto off arrangement, part counting facility, memory + facility.

Specification

Power Source AC 230V & DC 6V Battery

Technical Specification

-240v, readability 1g , 60Kg with vertical support

-240v, readability 1g , 100Kg with vertical support

Additional Information:

• Item Code: ACME703

A compact, ergonomic and handheldultrasonic pulse velocity testerfor quality assessment of concrete.

The device is made of light-weight shockproof plastic and has two built-in transducers withdry-point-contactwith fixed base (150 mm). Wear resistant tips of the transducers are insensitive to the surface condition. Hence, there is no need to apply coupling gel or to prepare objectsurface for testing.

The device has sound indication when ultrasonic signals are being received, non-volatile memory allowing storing of 50000 measurements (the results can be grouped) and infrared USB port for transferring of the

saved data to the external PC.

Connectable to oscilloscope, microprocessor,Resol.-0.1s

Additional Information:

• Item Code: ACME607

Cleveland Flash (Open) & Fire Point Apparatus (Electrically Heated)

For determining the flash & fire points of petroleum products except oils and products having an open cup flash below 1750 F.

It has a Cleveland flash-cup in brass with an insulated handle, a metal heating plate with a circular opening covered by asbestos board, an electric heater with energy regulator, and a gas test jet assembly. Suitable for operation on 220V, 50 Hz, Single Phase supply.

Additional Information:

• Item Code: ACME-209

• Aluminum alloy approx. 90xmm x 20mm deep
• Weight - 38g
• complete with lid and numbered

Additional Information:

• Item Code: ACME752

Additional Information:

• Item Code: ACME286