Ador Fontech Limited

Tensile Strength	1,10,000 PSI
Elongation	32%

SPAC 0400 Electrode for welding Inconel 600 and similar nickel base, composition alloys TECHNICAL DATA Tensile Strength: 1,10,000 PSI Elongation: 32% TYPICAL APPLICATIONS Basic Flux coated nickel base electrode for welding Inconel 600, inconel, incoloy monel, nickel chromiumiron alloys, HK alloys, stainless and heat resisting steels. Also for welding dissimilar metals such as carbon steels, stainless steels, nickel and nickel alloys to each other.For use on equipment and components made of pure nickel for fabrication of corrosion resistant tanks and containers, heat exchangers, furnace components, fittings, etc. Highly suitable for a wide range of dissimilar joint combinations between nickel base alloys and low alloy steels.

Tensile Strength	1,00,000 PSI
Elongation	30%

Basic flux coated electrode with excellent weldability TECHNICAL DATA Tensile Strength: 1,00,000 PSI Elongation: 30% TYPICAL APPLICATIONS For joint welding and surfacing of creep resistant nickel based alloys and cryogenic steels as well as austeno-ferrite joints at service temperatures between -196O C & 1200O C. Ni Cr 15 Fe and Ni alloys of analogous or similar chemical analysis, X10 Cr Ni Mo Nb 1812 (1.4583).High temperature austenitic stainless steels such as X8 Cr Ni Mo Nb 1616 etc. Pressure vessel steels X 20 Cr Mo V121 and X 20 Cr Mo W V 121 on stainless and high temperature austenitic steels.

Tensile Strength

60,000 PSI

Electrode for welding high strength nodular cast iron TECHNICAL DATA Tensile Strength: 60,000 PSI TYPICAL APPLICATIONS Electrode has easy and intimate fusion behavior with all types of cast irons. Hence best suited for welding and repairing all cast iron components, pump casings, valve flanges, foundry defects, correcting machining errors on castings and joining cast iron to steel.

Tensile Strength	95,000 PSI
Elongation	35-45%

Fully austenitic stainless steel electrode deposit having nil ferrite TECHNICAL DATA Tensile Strength: 95,000 PSI Elongation: 35-45% TYPICAL APPLICATIONS For joining AISI 316 L type having nil ferrite content. Used for welding AISI types such as 316, 316L, 317, 317L, 318 specially designed for urea reactors and similar chemical equipment.

Tensile Strength	1,05,000 PSI
Elongation	37%

Specially designed for high temperature steel TECHNICAL DATA Tensile Strength: 1,05,000 PSI Elongation: 37% TYPICAL APPLICATIONS Furnaces components,Combustion chambers parts, Burners components.