Agrosyn Impex

Polycarboxylate Ether Liquid 50% (PCE) is a ready to use high range water reducing concrete admixture emanating from the state-of-the-Art Polycarboxylate technology. It is new generation superplasticizer containing carboxylic (COOH) group instead of sulphonic (SO3H) as in case of Melamine or Naphthalene Formaldehyde Sulphonate.

• Nature : Synthetic polycarboxylic Ester.
• CAS Number : 70789-60-6

Properties:  The power packed (COOH) moiety is absorbed on hydrating cement grain in much greater amount than conventional superplasticizer, resulting excellent fluidity and yielding a Rheoplastic & Self Compacting Concrete (SCC) at low water cement ratio. Due to steric-hindrance effect imparted by ether-function hydrophilic chain attached to polymer, superior slump (workability) retention is achievable by use of PCE. It is compatible with all of PCE products. PCE is compatible with lingo base plasticizer. Do not use blending with SNF base plasticizer. PCE is the main raw material for concrete admixture, which improves water reducing abilities. We provide first rate products through continuous quality control and usage development.

Advantage: The advantage of PCE are as below:

• High water reducing ability.
• Easy to use any cement grade.
• Improve concrete setting time.
• Produces cohesive and non-segregating concrete mixtures.
• Small dosage level.
• Low concrete viscosity.
• Increase compressive and flexural strength of concrete at all ages.
• More than 30 % water reduction in high performance concrete.
• Linear water reduction through out the recommended dosage.
• Faster recycle of formwork owing to accelerated early strength development.
• Close textured fair faced smooth concrete.
• Rheoplastic self-leveling and self compacting concrete.
• Economical concrete design.

Dosage: 0.2 to 1.0 kilograms/100 kilograms cementitious material for most concrete mixes using typical concrete ingredients. However for silica fume concrete, the dosage may fall outside recommendation and site trials in case of critical workability and setting time parameters as per requisites to fix optimum dosage. To be mix with water and added to cement aggregate mixture.

Polycarboxylate ether (PCE) is a ready to use high range water reducing concrete admixture emanating from the stateof- the-Art Polycarboxylate technology. It is new generation superplasticizer containing carboxylic (COOH) group instead of sulphonic (SO3H) as in case of Melamine or Naphthalene Formaldehyde Sulphonate. Nature: Synthetic polycarboxylic Ester. CAS Number : 70789-60-6.

Properties: The power packed (COOH) moiety is absorbed on hydrating cement grain in much greater amount than conventional superplasticizer, resulting excellent fluidity and yielding a Rheoplastic & Self Compacting Concrete (SCC) at low water cement ratio. Due to steric-hindrance effect imparted by ether-function hydrophilic chain attached to polymer, superior slump (workability) retention is achievable by use of PCE. PCE is compatible with lingo base plasticizer. Do not use blending with SNF base plasticizer. PCE is the main raw material for concrete admixture, which improves water reducing abilities. We provide first rate products through continuous quality control and usage development.

Advantage: The advantage of PCE are as below:

• High water reducing ability.
• Easy to use any cement grade.
• Improve concrete setting time.
• Produces cohesive and non-segregating concrete mixtures.
• Small dosage level.
• Low concrete viscosity.
• Increase compressive and flexural strength of concrete at all ages.
• More than 30 % water reduction in high performance concrete.
• Linear water reduction throughout the recommended dosage.
• Faster recycle of formwork owing to accelerated early strength development.
• Close textured fair faced smooth concrete.
• Rheoplastic self-leveling and self compacting concrete.
• Economical concrete design.

Dosage: 0.1 to 0.5 kilograms/100 kilograms cementitious material for most concrete mixes using typical concrete ingredients. However for silica fume concrete, the dosage may fall outside recommendation and site trials in case of critical workability and setting time parameters as per requisites to fix optimum dosage. To be mix with water and added to cement aggregate mixture.

Densified Microsilica is a mineral admixture composed mainly of very fine solid glassy spheres of silicon dioxide. It has a huge demand in construction industries because it helps to reduce thermal cracking caused by the heat of cement hydration and can improve durability.

We are engaged in offering wide range of Sodium Gluconate Powder.

Sulphonated Naphthalene Formaldehyde Condensate Liquid 40% having powerful dispersing properties and capable to producing very mobile free flowing pump able concrete. An excellent synthetic auxiliary dispersing agent for neutralization, dye leveling and a precipitating agent for chemical and allied industries. Superplasticizer having powerful dispersing properties and capable to producing very mobile free flowing pump able concrete. An excellent synthetic auxiliary dispersing agent for neutralization, dye leveling and a precipitating agent for chemical and allied industries.

Nature : Naphthalene sulfonic acid formaldehyde poly condensate, sodium salt

Features:

• It is an aqueous solution of Sulphonated Naphthalene Formaldehyde, Sodium salt polymer.
• This is an excellent dispersing agent.
• Designed to offer wider tolerances in formulations for concrete admixture manufacturers.
• It is compatible with most of the additives used in admixture formulations.
• It helps in producing concrete with various unique properties.

• Construction industry: High Range water reducer in concrete. Water reduction in concrete up to 25%. Higher slump with lower water - cement ratio. Flow able & pump able concrete with improved theology. Possess homogeneous, free from Honeycombing and dense concrete. High strength due to reduced water – cement ratio.

We are engaged in offering wide range of Sodium Lignosulfonate Powder.

We have following SLS available 

• Sodium Lignosulphonate Russia
• Sodium Lignosulphonate China

Uses:

• To produce pumpable concrete
• To produce high strength, high grade concrete by substantial reduction in water resulting in low permeability and high early strength.
• To produce high workability concrete requiring little or no vibration during placing.

Advantages:

• Improved workability – Easier, quicker placing and compactipon.
• Increased strength – Provides high early strength for precast concrete with the advantage of higher water reduction ability.
• Improved quality – Denser, closer textured concrete with reduced porosity and hence more durable
• Higher cohesion – Risk of segregation and bleeding minimized; thus aids pumping of concrete
• Chloride free – Safe in prestressed concrete and with sulphate resisting cements and marine aggregates.

We have range of SNF B Powder (Sulphonated Naphthalene Formaldehyde Condensate Powder) used in dyes, leather and construction industries.

Application:

• Construction industry: High Range water reducer in concrete. Water reduction in concrete up to 20 %. Higher slump with lower water – cement ratio. Flow able & pump able concrete with improved rheology. Possess homogeneous, free from Honeycombing and dense concrete. High strength due to reduced water – cement ratio.

• Construction industry: High Range water reducer in concrete. Water reduction in concrete up to 20 %. Higher slump with lower water – cement ratio. Flow able & pump able concrete with improved rheology. Possess homogeneous, free from Honeycombing and dense concrete. High strength due to reduced water – cement ratio.

Special features:

• It is an aqueous solution of Sulphonated Naphthalene Formaldehyde, Sodium salt polymer.
• This is an excellent dispersing agent.
• Designed to offer wider tolerances in formulations for concrete admixture manufacturers.
• It is compatible with most of the additives used in admixture formulations.
• It helps in producing concrete with various unique properties.

Application: Construction industry: High Range water reducer in concrete. Water reduction in concrete up to 25%. Higher slump with lower water – cement ratio. Flow able & pump able concrete with improved theology. Possess homogeneous, free from Honeycombing and dense concrete. High strength due to reduced water – cement ratio.

Superplasticizer having powerful dispersing properties and capable to producing very mobile free flowing pump able concrete. Nature: Sulphonated Melamine formaldehyde polymer, sodium salt. CAS No : 64787-97-9.

Properties: SMF Powder is easy to absorb the moisture from the air, so it must be kept in the original sealed bag and stored at the dry place. If stored properly in its original sealed packaging the shelf life is at least 6 months.

Application:

• SMF Powder is an excellent dispersing agent for cement particles and extensively used in concrete, mortars and self-levelling compositions. It promotes fine dispersion with controlled rheological behaviour of cementitious compositions ensuring for extended workability. Good liquefying agent for concrete & mortar mixes.

Feature:

• High strength concrete, high fluidity concrete, high duration concrete, aluminate  cement refractory concrete, low cement refractory concrete, steam curing  concrete.
• High strength mortar, gypsum products, self-flowing ground, stuffing materials, grouting materials.
• Specifically designed as an admixture for manufacture of white cement/concrete  tiles
• Be used as the brightened agent for manufacturing the colored road brick and the tunnel liner.

• Sulphonated Melamine Formaldehyde Condensate Liquid is a very sensitive product. Therefore it must be stored in its original sealed packaging. If stored properly in its original sealed packaging the shelf life is at least 6 months.

Application:

• Sulphonated Melamine Formaldehyde Condensate Liquid is an excellent dispersing agent for cement particles and extensively used in concrete, mortars and self-leveling compositions. It promotes fine dispersion with controlled rheological behaviour of cementitious compositions ensuring for extended workability. Good liquefying agent for concrete & mortar mixes.

Feature:

• High strength concrete, high fluidity concrete, high duration concrete, aluminate cement refractory concrete, low cement refractory concrete, steam curing concrete.
• High strength mortar, gypsum products, self-flowing ground, stuffing materials, grouting materials.
• Specifically designed as an admixture for manufacture of white cement/concrete tiles.
• Be used as the brightened agent for manufacturing the colored road brick and the tunnel liner.

• Nature : Sulphonated Melamine formaldehyde polymer, sodium salt.

We have range of Sulfonated Naphthalene Formaldehyde Condensate Powder used in construction industries. Sodium Sulphate 18%.

Application:

• Construction industry: High Range water reducer in concrete. Water reduction in concrete up to 20 %. Higher slump with lower water – cement ratio. Flow able & pump able concrete with improved rheology. Possess homogeneous, free from Honeycombing and dense concrete. High strength due to reduced water – cement ratio.

• Clear colourless solution or slightly hazy colour.(CH2O)

With enriched industrial experience, we have been able to offer a wide spectrum of Construction Concrete Admixture. These concrete admixtures are used for the production of super plasticized concrete admixtures and to improve the strength of concrete. Our offered concrete admixtures are well known for their superb bonding. Provided concrete admixtures are processed using high quality compounds. 

Features:

• Water resistant
• Reduction in cracking
• UV resistant

Features:

• High effectiveness
• Extended shelf life Pure.