Aimil Ltd.

• Rust proof stainless steel pressure vessel & enclosure
• Microprocessor based PID controller for accurately controlling the temperature hence pressure
• Three fold safety mechanism for the equipment & the operator
• Reliable silicon rubber lid sealing gasket
• Very Compact

• Working Pressure : 21 ± 1kg / cm2 at 215° C
• Pressure Vessel: ID 150mm X Depth 500 mm
• Weight : 70 Kg
• Heater : 2000 Watts
• Supply : 220V, 50Hz, 1 phase

• AIM 45401 Measure 3 litres
• AIM 45402 Measure 15 litres
• AIM 45403 Measure 30 litres

Designed to speed-up crushing of aggregates, Ores, Mineral, Coal and similar materials.

• Compact and rugged for laboratory and small production units.

• Manganese steel jaws adjustable upto 6 mm opening.

• 250kg materials can be crushed in approx. eight hours

• Discharging opening adjustment range: 3-1 Omm

• Supported with strong steel frame.

• Suitable to crush any type of stone up to 45mm.

• Suitable for cement and chemical laboratories.

• Ruggedly constructed from galvanised wire mesh, 20 cm dia x 20 cm high (approx.).

• Specific gravity and water absorption

• Benkelman Beam utilizes the technique of using balanced beam in conjunction with a suitable vehicle to measure road flexure.
• The improved Benkelman Beam is a convenient, accurate device for measuring the deflection of flexible pavements under moving wheel loads.
• Operating on a simple lever arm principle, the unit consists of a Reference Beam, Body, two part Probe Beam and Rear Zero adjust.

• Mixing Capacity : 40 ltrs.
• Overall Dimension : 910mm X 875 mm X 1250mm
• Motor : 2 HP, 960 RPM

• Portable & Compact.
• Adjustable Blades.
• Simple to clean & maintain.
• Easy to operate.

• Ductility

• Automatic control of the movement of fluid until the upper mark.
• Automatic sensing of the upper & lower marks ensuring error free repeatable measurement of the time taken for the liquid column to fall.
• Automatic measurement of temperature during the test using a Pt 100 probe
• Automatic cor reaction of formula for calculation of the Blaine value per IS:5516 with variation in temperature.
• Facility to operate in either Standalone Mode or through a Computer Controlled system complete with software.
• Login Facility as Supervisor & Operator
• Report Generation based on Date/Time, User type & type of cement
• Facility to measure Cement Sample Load
• Facility to Monitor and Configure various Cement types
• Timing accuracy up to 200mSec.
• Power Consumption less than 5W

• AIM 062-1 : Load Frame, Motorised Three-Speed, 50 kN
• AIM 064 : Load Frame, Motorised, 30 speeds,50 kN
• AIM 064-E : Load Frame, Motorised, 50 kN Microprocessor Based
• AIM 065 : Load Frame, Motorised, 12 speeds,200 kN
• AIM 066 : Load Frame, Motorised, 12 speeds, 500 kN

• General Purpose CBR, Triaxial tests, Traixial and CBR tests, Traixial test on rocks Unconfined Compression test on medium & Coarse grained stablized soil, Triaxial, CBR & Unconfined Compression test.

• Brand/Make Aimil
• Model/Type AIM 461
• Automatic Grade Fully-automatic

• Sample Testing

• Base has cleats on its underside to help dig into the ground surface.
• Positive clamping of slump cone to the base while filling and tamping the concrete.
• A combination swivel carrying handle also serves as the datum making the conventional and somewhat awkward measuring procedure of sing a foot rule and a datum bar, a thing of the past.

• Ref. Standards: IS:2720 (Part 5), IS:9259, BS 1377 Mechanical method known as the Casagrande Method has been a standardised test in Soil Mechanics for many years.
• High quality of design ensures consistency of results
• Satisfies International Standards
• Motorised model with integral blow counter is also available