How it Works
Tell us what you need by filling in the form
Receive Verified supplier details
Compare Quotations and seal the deal
X
I agree to the terms and privacy policy
144188195215245280

Home

> Industrial Plants & Machinery

> Machines & Equipments

> Akarshakti Engineering Industries

Akarshakti Engineering Industries

Yamuna Nagar, Haryana

| GST  06BCEPK1261Q1ZE

| Verified Supplier

View Mobile Number 17% Response Rate

Akarshakti Engineering Industries - Manufacturer of agitator, bailing press & beater since 1986 in Yamuna Nagar, Haryana....Read More

Agitator

Agitator

Get Quote
Bailing Press

Bailing Press

Get Quote
Beater

Beater

Get Quote

Agitator
Get Best Quote

Agitator

Get Latest Price

The agitator assembly setting with M.S. Fabricated main frame or M.S.Impeller, EN ? 8 shaft, C.I.main body, C.I. Bearing Housing, C.I. inner and boarding ring, C.I.Drive & driven pulley. The agitator will be driven with gear box, ratio, and electric motor. The agitator will be mounted in a RCC chest. Other details will be completed as per our standard & design.

View Complete Details

Yes I'm interested

Bailing Press
Get Best Quote

Bailing Press

Get Latest Price

Bailing press are typically used to compact similar types of waste, such as office paper, Corrugated fiberboard, plastic, foil and cans, for sale to recycling companies. These balers are made of steel with a hydraulic ram to compress the material loaded. Some balers are simple and labor-intensive, but are suitable for smaller volumes. Other balers are very complex and automated, and are used where large quantities of waste are handled.

View Complete Details

Yes I'm interested

Beater
Get Best Quote

Beater

Get Latest Price

This machine is used for beating the rags. The rags without dust are used for the purpose for making the good pulp. Other detail of the machine is as under: FRAME: 2Nos. Sturdy rigid and heavy-duty frames C.I. are grouted on both sides of RCC chest 2nos. C.I. arms are fitted in the above frames on which the rotor is mounted with the help of bearing and plumber block with lowering and lifting arrangement as per requirement. ROTOR: 3Nos. C.I.discs of heavy-duty are fitted on EN-8 shaft into EN ? 8 steel knives thick are fitted with the help of shish am woods in the C.I.Discs and finally locked with locking rings & supported with 6 nos. scrapers from the both sides. CHEST: Beater chest is made from RCC material with a partition in between in which Rotor assembly is fitted on one side and washing drum assembly on the other side. BED PLATE: Bed box along with Bed knife. Of EN ? 8 steel are grouted under the rotor assembly in RCC chest at an inclination angle WASHING: The washing drum is fabricated from M.S. Sheet. Internal wash water Sheet DRUM: for scooping the water out are in the washing drum. The drum is finally covered with M.S/S.S wire netting etc. HOOD: The rotor guard/cover in the shape of semi circular is called rotor Hood which is fabricated from M.S. and the same is covered with the help of wooden planks.

View Complete Details

Yes I'm interested

Calendar Machine
Get Best Quote

Calendar Machine

Get Latest Price

Calendar Machine is used in the handmade paper industries for calendaring the sundry papers which remove the wrinkles after its calendaring in the e Calendar Machine there are 2 nos. chilled caster rolls. The Calendar Machine will be completed with M.S. Fabricated Box Type Frames fitted with brass which will be grouted with the help of foundation bolts. The Machine will be completed with gear and pinions and it will be driven with the help of motor along with reduction gear box of ratio the machine will be completed as per our standard specification & design.

View Complete Details

Yes I'm interested

Cylinder Mould
Get Best Quote

Cylinder Mould

Get Latest Price

Akar Shakti brand completes sundry plants of capacities from 2 or 5 Tons per day. The Cylinder Mould Machine of size 42?, 43? and 72? Face length with M.S. fabricated vat. The principal advantages are in the production of half stuff of uniform moisture content and a saving of Labour. Further sheet can be dried up in the sun can be pass through a single nip calendar machine for good finish. It is the heart of a Paper/Board machine. It controls stick flow, pick up on the felt part and is responsible for good Single layer/multi layer formation and substance profile across the full web it will be complete with SS Strips Guide Rolls Covered with Rubberized/Ebonite coated fitted with waterproof Bearing and Gear Box. The other details are as under: - PURPOSE: ? The Machine is useful for making the Paper Sheets from the Ready Pulp/ waste paper or cotton. MOULD:- The Drum consisting. Spiders are mounting on EN ? 8. Shaft on equal distance Thickness are cross fitted in the Group made on spiders. Finally the Mould assembly is then covered with supporting wire. VAT:- The M.S. Fabricated Vat made out M.S. Plate for Different portions with necessary coverage to suit Mould with Inflow and Counter Flow and connections. ROLLS: ? Felt Rolls Covered with Ebonite Coated. Press Rolls. M.S. Pin Cut Worm Roll 1 No., Baby Press Roll Covered with Rubberized?Baby Press Roll Covered with Rubberized Ebonite.

View Complete Details

Yes I'm interested

Dust Collector
Get Best Quote

Dust Collector

Get Latest Price

The machine used to conical the dust which flies while dusty /cutting of wood, rags etc, also used in environmental purposed, makes the pollution free atmosphere cycling type fabricated body, pipe line jointed, hopper, dust controlling nozzle at the bottom.

View Complete Details

Yes I'm interested

Decker Thickener Drum
Get Best Quote

Decker Thickener Drum

Get Latest Price

1. TECHNICAL DATA:- ? Size of Decker Drum : 1500mm Dia x 3500 mm Face. ? Vat size : 4350mm length x 2210mm width x 1520mm height. ? Inlet Consistency : 0.8 to1% ? Outlet Consistency : 4.0% to 5% ? Drum RPM : 8 RPM ? Drive Motor : 10 HP x 1440 RPM (BY CLIENT). ? Reduction Gear Box : 8″ CRS, 60:1 Ratio (BY CLIENT).

2. MATERIAL OF CONSTRUCTION:- ? Side Disc : 2 Nos. of Cast Iron. ? Spider : 6 Nos. of Cast Iron. ? Spider Ring : 17 Nos. of S.S.(304) Fabricated ? Distance Pieces : 7 Nos. of Cast Iron.. ? Shaft : Seamless pipe shaft shrink fitted EN-8 journal with Bearing 22222-K, Sleeve H-322 & Plummer Block S-522 (2 sets). ? S.S. Rod : 10mm Dia x 3000mm long?..156 Nos. ? Backing Plate : S.S. (304) of 5 Mesh. ? Top Wire : S.S. (304) of 40 Mesh. ? Drive Gear : 60 Teeth x 3 DP x 75mm face cast steel. ? Pinion : 20 Teeth x 3 DP x 75mm face M.S. ? Shower Pipe : 2 Nos. G.I. with clumping arrangement. ? Tech. Sketch : Other details complete as per our Technical Sketch No. SK-100-90 attached herewith.

3. SCOPE OF SUPPLY: – Drum with above construction Top Wire, shower Pipe, Gear & Pinion.

View Complete Details

Yes I'm interested

The Fourdriner Type Automatic Dryer
Get Best Quote
The machine on which variety range of papers are made is called Fourdrinier machine. ?Akarshakti Enginreeing Works? made machine is suitable for manufacturing the paper for 60 GSM to 300 GSM with a deckle of 1 meter. The machine is designed to works at speed of 25 meters. The machine is designed to works at speed of 25 meters per minute. Akarshakti Engineering Work s Yamuna Nagar has developed a Fourdriner type Automatic Dryer paper machine in Hand Made Paper Industry There is wide rang of methods of preparation of a good pulp from a fibrous raw material depending on nature of raw material, and manufacturing of type of paper required. Usually, the operation consisting essentially separating the ultimate fibers and then purifying them to the extent depending on the quality required at the time of final product.

View Complete Details

Yes I'm interested

Hydra Pulper
Get Best Quote

Hydra Pulper

Get Latest Price

Hydra Pulper machine is available in different capacity depending upon the requirement of the industry. The machine is useful for making the pulp from waste paper. In its construction there is an M.S.Fabricated body, casting steel rotor having there to 4 nos v for internal circulation per forated sheet, feeding hoper, EN-8 shaft, bags & baskets, discharge chutes pulley. The power consumption is reduced to 20-40% due its effectuation for broking the waste paper converting it into pulp.

View Complete Details

Yes I'm interested

Hydraulic Press
Get Best Quote

Hydraulic Press

Get Latest Price

The Hydraulic Press made out of M.S. Fabricated heavy duty Body. The Hydraulic Press complete with Pressure Gauge, Oil Pump & Bottom Plate duly finish with One No. Trolley. RAM: ? piston with latest sealing washer with one spare washer housed in a thick cylinder to travel maximum height. Day light of the press not less than 15? height. Press to be operated by a complete power pack with Gear Pump, NRV, Relief Valve, Strainer with Pressure Gauge, Safety Valve. Pump to be connected with Hydraulic Pipe of suitable Dia to the Cylinder holding the Ram. Press will be driven with an Electric Motor. Other specifications will be complete as per our standard & design.

View Complete Details

Yes I'm interested

Log Chopper
Get Best Quote

Log Chopper

Get Latest Price

AKAR SHAKTI? had developed a Wood/Log Chipping Machine. The above said Machine cut the Wood/Logs into the small pieces or subject to your requirement. After cutting the material you can use as a raw material in Paper Mill/Paper Industries or as well as used in the Boilers as a fuel for heating purpose. The machine made out of M.S. Heavy Duty Body, Belt Conveyor, Chain Sprocket, Helical Gears, Bearing, Brackets and Heavy Duty Fly wheel & Pulley, One set Knives fitted with the Machine. The Machine will be complete as per our standard & design.

View Complete Details

Yes I'm interested

Lye Mixer
Get Best Quote

Lye Mixer

Get Latest Price

The lye mixer is suitable to feed your 4 nos. 14' dia rotary digesters comprising with:- vat length:7460mm length x 900mm width x 600mm height, overall length of m/c:8940mm, screw : 450mm dia x 450mm pitch x 6200mm length, bearing : 22220-k? . . 4 sets, drive motor : 15 hp x 1440 rpm ( by client), drive gear box : u-800, 40:1 ratio.

View Complete Details

Yes I'm interested

Paper Sheet Cutting Machine
Get Best Quote
Paper Sheet Cutting Machine face length double stroke C.I.frame and base plate rush proof complete with all gears and operating system. The machine will be completed with an electric motor along with electrical panel.

View Complete Details

Yes I'm interested

Pulp Pump
Get Best Quote

Pulp Pump

Get Latest Price

The Pulp Pump is used to lift the Chest Paper Machine.The pump varies in size and capacities. The manufacturing of pump consisting of the following parts such as C.I. Body, S.S.Impeller, S.S.wear Plate, EN-8 shafts, Drive & Driven pulley. It will be driven with an electrical motor depending upon the size and capacities of the pump.

View Complete Details

Yes I'm interested

Refiner
Get Best Quote

Refiner

Get Latest Price

This device is used for refining the pulp. It is helps for making good and fine quality of paper without any porming layers, C.I. Body comicol type bronze knives, conical rotor with bronze knives,lulet & outlet connections, available in single or double dises EN-8 shaft bags & brackets, available in all size as per requirement.

View Complete Details

Yes I'm interested

Paper Bending Machine

Paper Bending Machine

Get Latest Price

Ask for Details

Hydro Pulper

Hydro Pulper

Get Latest Price

Ask for Details

Paper Calender Machine

Paper Calender Machine

Get Latest Price

Ask for Details

Rag Chopper
Get Best Quote

Rag Chopper

Get Latest Price

The Machine is used to cut the Rags into small pieces up to ½?x1? length and the Machine is suitable for cutting the Rags PARTICULARS OF RAGS CHOPPER ARE AS UNDER:- BODY: M.S. Fabricated Body ROTOR: Fabricated Rotor suitable for the Knife. M.S. Shaft fitted with bearing and Plumber Block. M. S. ROLL: Drive Rolls and Discharge Conveyor. PULLEY: The Pulley contains V- Section belt drive & other place Flywheel is fitted on Rotor assembly for balancing purpose. CHUTES: In feed chute and discharge conveyor are provided for feeding the rags to the rotor and discharge of cut rags at some distance. H.P: H.P will be required for the machine. The Machine will be run at according to H.P. required. All the electrical such as motor, starters, fuses, switches, guards, wire, Cable etc are included in our supply.

View Complete Details

Yes I'm interested

Straw Cutter
Get Best Quote

Straw Cutter

Get Latest Price

The Straw cutter machine having M.S.Fabricated Frame, M.S.Fabricated Rotor fitted with EN-8 shaft with Bearing , Sleeve, & bearing housing, C.I.Fly wheel, Head knife holder, M.S.Rotor cover C.I.Pulley, lifting and lowering arrangement for the rotor cover, specially designed, Infeed conveyor with feeding system comprising with top and bottom feed roll, duly interconnected, chain cover, Infeed and discharge conveyor felt rolls, conveyor felt for both the conveyor, C.I.drive and driven pulley for both motors.

View Complete Details

Yes I'm interested

Consultancy Services

Get Latest Price

Akarshatkti offers professional and experienced consultancy services for selection of land, design of plant sites/buildings, selection of best units/plants, decisions regarding capacity of plants, selection of raw material, installation of the latest modified versions of handmade paper plants, recycling units, etc.

View Complete Details

Get Best Quote
Yes I'm interested

Head Box For Mill Board

Head Box For Mill Board

Get Latest Price

Ask for Details

Knife Grinding Machine

Get Latest Price

It is used for making edge in knife.machine is available in both type manual and automatic. parts:-m.s fabricated body,water pump, water tank,electric motor,grinding stone,blade holder bed,c.i sliding etc.

View Complete Details

Get Best Quote
Yes I'm interested

Vibrating Screen

Vibrating Screen

Get Latest Price

Ask for Details

Cylinder Mould Machine

Cylinder Mould Machine

Get Latest Price

Ask for Details

Drum Type Wood Chipper

Drum Type Wood Chipper

Get Latest Price

Ask for Details

Knife Grinding Machine

Knife Grinding Machine

Get Latest Price

Ask for Details

Screw Press

Screw Press

Get Latest Price

Ask for Details

Sieves Drum Or Sheet Former
Ask for Details

Storage Tank Or Silos

Storage Tank Or Silos

Get Latest Price

Ask for Details

Wood Chipper

Wood Chipper

Get Latest Price

Ask for Details

Pulp Mill Plant

Pulp Mill Plant

Get Latest Price

Ask for Details

Get Price & Details

Get Price & Details

Board Making Machinery

Board Making Machinery

Get Latest Price

Ask for Details

Rag Chopper

Rag Chopper

Get Latest Price

Ask for Details

Yankee Cylinder

Yankee Cylinder

Get Latest Price

Ask for Details

Akarshakti Engineering Industries - Manufacturer of agitator, bailing press & beater since 1986 in Yamuna Nagar, Haryana....Read More

Download Brochure

Nature of Business

Manufacturer

Year of Establishment

1986

GST Number

06BCEPK1261Q1ZE
View Complete Details
Send us a Quick Message!
Tell Us What Are You Looking For?
I agree to the terms and privacy policy
View Mobile Number  to reach us quickly
Tell us what you
need
Receive seller
details
Seal the deal
Save time! Get Best Deal
I agree to the terms and privacy policy