Allied Safety Equipments Private Limited

Designed for caving, RACK is a descender that is easy to manipulate. It is used with 9 to 13 mm diameter low stretch kernmantel ropes on one rope strand and can be used on two strands (8 to 11 mm low stretch kernmantel ropes) to facilitate long descents of over 80 meters. The lifespan of the device can be optimized by replacing the brake bars.

Description

• Simple to use:
  - very easy to use. - The bars engaged on the rope may be adjusted at any time to obtain the desired amount of friction
  - compatible with 9 to 13 mm diameter low stretch kernmantel ropes
• Suited for long descents (over 80 meters):
  - can be used on two rope strands, with 8 to 11 mm diameter low stretch kernmantel ropes
  - good distribution of friction and heat helps preserve the rope
  - does not twist the rope
• Lifespan of the device can be optimized by replacing the brake bars (D11300, D11250 and D11200)

• Material(s): stainless steel frame, aluminum bars
• Weight: 470 g
• Rope compatibility: 9 to 13 mm low stretch kernmantel rope on one rope strand, 8 to 11 mm on two strands

Additional Information:

• Item Code: Rack

Self-braking descender with anti-panic function for rescue
The I’D L self-braking descender is primarily designed for rescue. It has an ergonomic handle that allows comfortable descent control. The integrated anti-panic function and anti-error catch limit the risk of an accident due to user error. The AUTO-LOCK system allows users to position themselves without having to manipulate the handle or tie off the device. Once locked, the rope can be taken up without having to manipulate the handle. The safety gate allows the rope to be installed with the device remaining connected to the harness. I’D L is compatible with 12.5 to 13 mm ropes and allows handling of loads up to 280 kg.

• Designed for rescue
• Easy to use:
  - safety gate on the moving side plate allows the rope to be installed easily while the device remains connected to the harness
  - easy rope installation, thanks to the rope guide and markings
  - anti-error catch to reduce the risk of an accident due to incorrect installation of the device on the rope
  - ergonomic handle allows the rope to be released and enables comfortable control of the descent. Two possible descent modes: on the side plate or in the V-shaped friction channel
  - anti-panic function automatically stops the descent if the user pulls too hard on the handle
  - allows smooth movement along inclined or horizontal terrain
  - AUTO-LOCK system allows users to position themselves without having to manipulate the handle or tie off the device: as soon as the user releases the handle, the rope is automatically locked in the device. The automatic return system on the handle limits the risk of the device getting accidentally snagged
  - handle automatically switches to storage position when the rope is removed from the device, reducing the risk of accidental snagging when the descender is carried on the harness
• Versatile:
  - once locked, the rope can be taken up without having to manipulate the handle, for making a reversible haul system or for easy short ascents, for example
  - cam can be manipulated for feeding out slack easily or for belaying a lead using climbing techniques
  - the moving side plate locks with a screw, allowing the I’D L to be integrated into rescue kits
  - an auxiliary brake, open or closed, may be added to improve descent control depending on the weight and rope diameter
• The stainless steel wear plate improves durability by reinforcing the rope friction zone
• Descending a heavy load up to 280 kg
• Rope compatibility: 12.5 to 13 mm diameter
• Available in two colors: red and black

• Material(s): aluminum, steel, nylon
• Weight: 600 g
• Maximum working load for one person: 150 kg 
• Maximum working load for two persons (rescue): 280 kg
• Certification(s): EN 341 type 2 class A, CE EN 12841 type C, ANSI Z359.4, NFPA 1983 General Use, EAC - EN 341 type 2 class A when used with a VECTOR 12.5 mm rope - EN 12841 type C when used with a 12.5 to 13 mm EN 1891 A rope - ANSI Z359.4 when used with a 12.5 to 13 mm rope - NFPA 1983 General Use when used with a 12.5 to 13 mm rope

Additional Information:

• Item Code: I-DL

MAESTRO S is a descender designed for technical rescue operations. It facilitates manipulation of heavy loads, for lowering or hauling, and may be used in both the primary system or in a back-up belay. This versatility allows rescuers to adapt to any situation they may encounter on the rescue scene. The ergonomic handle and integrated brake allow for comfortably controlled descent. Shifting from lowering position to hauling position is immediate, without the need to transfer the load. The integrated progress-capture pulley has a large diameter sheave mounted on sealed ball bearings, ensuring excellent hauling efficiency. The AUTO-LOCK system automatically locks the rope when the handle is not in use. Once locked, the rope can be taken up without having to manipulate the handle. The MAESTRO S descender is compatible with 10.5 to 11.5 mm ropes and allows handling of loads up to 250 kg.

• Great versatility, ideal for technical rescue:
  - locking system with integrated progress-capture pulley allows the same device to be used for descent and hauling
  - can be used in both a single or twin primary system and in a back-up belay
  - lower connection point can be used to create different types of hauling systems
  - hole in the handle for installation of a distance control cord
• Easy to use:
  - easy rope installation, thanks to the markings on the device
  - ergonomic handle allows the rope to be released progressively and enables comfortable control of the descent
  - immediate shift from lowering position to hauling position without having to transfer the load
  - AUTO-LOCK system allows the rope to be blocked automatically when the handle is not in use. Once locked, the rope can be taken up without having to manipulate the handle.
• Efficient for handling heavy loads:
  - integrated progress-capture pulley with very large diameter sheave mounted on sealed ball bearings; rotates in only one direction for excellent hauling efficiency
  - sheave is faceted, creating additional friction zones for the rope and thus additional braking on descents
  - integrated brake on the device to adjust the friction based on the load and the rope diameter
  - handling of loads up to 250 kg
• Rope compatibility: 10.5 to 11.5 mm diameter

• Material(s): aluminum, stainless steel, nylon
• Weight: 1100 g
• Min. rope diameter: 10,5 mm
• Max. rope diameter: 11,5 mm
• Sheave type: faceted, on sealed ball bearings
• Maximum working load: 250 kg 
• Breaking strength: 18 kN x 2 = 36 kN
• Efficiency: 86 %
• Certifications: CE EN 12841 type C, EN 341, NFPA 1983 Technical Use, EAC

Additional Information:

• Item Code: Pro-Taxation

Compact self-braking descender for rope access, designed for experienced users

RIG is a compact self-braking descender for rope access, designed for experienced users. It has an ergonomic handle that allows comfortable descent control. The AUTO-LOCK system allows users to easily position themselves at the work station without having to manipulate the handle or tie off the device. Once locked, the rope can be taken up without having to manipulate the handle. The safety gate allows the rope to be installed with the device remaining connected to the harness.

Description

• Designed for experienced rope access workers
• Easy to use:
  - safety gate on the moving side plate allows the rope to be installed easily while the device remains connected to the harness, facilitating the passage of intermediate anchors
  - easy rope installation, thanks to the rope guide and markings
  - ergonomic handle allows the rope to be released and enables convenient descent control. Two possible descent modes: on the side plate or in the V-shaped friction channel
  - AUTO-LOCK system allows users to easily position themselves at the work station without having to manipulate the handle or tie off the device: as soon as the user releases the handle, the rope is automatically locked in the device. The automatic return system on the handle limits the risk of the device getting accidentally snagged
  - handle automatically switches to storage position when the rope is removed from the device, reducing the risk of accidental snagging when the descender is carried on the harness
• Versatile:
  - once locked, the rope can be taken up without having to manipulate the handle, allowing for easy short ascents, for example
  - cam can be manipulated to take up slack easily or belay a lead using climbing techniques
• The stainless steel wear plate improves durability by reinforcing the rope friction zone
• Descending a heavy load up to 200 kg
• Rope compatibility: 10 to 11.5 mm in diameter
• Available in two colors: yellow and black

• Material(s): aluminum, steel, nylon
• Weight: 400 g
• Maximum working load: 200 kg 
• Certification(s): EN 341 type 2 class A, CE EN 12841 type C, CE EN 15151-1, NFPA 1983 Technical Use, EAC - EN 341 type 2 class A when used with PARALLEL 10.5 mm or AXIS 11 mm rope - EN 12841 type C when used with a 10 to 11.5 mm EN 1891 A rope - EN 15151-1 when used with a 9 to 11 mm rope - NFPA 1983 Technical Use when used with a 10 to 11.5 mm rope

Additional Information:

• Item Code: Rig

Lightweight, multipurpose belay/rappel device; can be used to belay a second in Reverso mode

The lightweight REVERSO is a multi-functional belay/rappel device designed for cragging, multi-pitch climbing and mountaineering. Reverso mode provides assisted-braking while belaying one or two seconding climbers from the top of a pitch. It accommodates most rope diameters: single rope 8.5 to 10.5 mm, half ropes 7.1 to 9.2 mm and twin ropes 6.9 to 9.2 mm. The specific design of the rope slots allows the rope to glide smoothly and reduces wear.

Description

• Multipurpose and easy to use:
  - classic belay technique with both hands on the rope
  - ropes glide smoothly through the device
  - can be used for rappels
  - Reverso mode for belaying one or two seconds; commonly used on multi-pitch climbs
  - independent and simultaneous belaying of two seconds in Reverso mode
  - while belaying in Reverso mode, a carabiner placed in the release hole allows the belayer to give slack when the device is under tension
  - rope installation diagrams for belaying and Reverso mode are engraved on the device
• Adapted to a broad range of rope diameters:
  - V-shaped friction grooves enable controlled braking
  - compatible with dynamic single ropes 8.5 to 10.5 mm (11 mm possible, depending on the rope's suppleness)
  - compatible with dynamic half ropes 7.1 to 9.2 mm
  - compatible with dynamic twin ropes 6.9 to 9.2 mm
• Durable and lightweight:
  - the rounded design of the rope slots limits wear and extends the life of the device
  - compact and lightweight: only 57 g

• Weight: 57 g
• Rope compatibility: single ropes 8.5 to10.5 mm, half ropes 7.1 to 9.2 mm, and twin ropes 6.9 to 9.2 mm
• Material(s): aluminum frame
• Certification(s): EN 15151-2, UIAA

Additional Information:

• Item Code: Reverso