Alpha Engineering Equipments

Hammer Weight	2.6 kg
Test Standard	Standard
Automation Grade	Manual
Brand	Alpha Engineering
Material	SS
Color	Blue
Usage/Application	Industrial
Finishing	Polished
Weight	5 Kg

soil compaction is a fundamental requirement for the construction of earth fill for dams, reservoirs, canal embankments, highways, railways and runways. The relationship between soil moisture content and compacted dry density is very useful for deciding construction specifications and quality control of compacted earth fill. While designing an earth or earth retaining structure, the strength and deformation behaviour of soil is evaluated by testing soil specimen compacted to the density as would be achieved during construction. The construction quality control is essentially to check the density of compacted soil achieved in the field, thereby checking its strength.

Material	SS
Automation Grade	Automatic
Color	Blue
Finishing	Polished
Usage/Application	Labratory
Display	Digital

The Direct Shear test apparatus consist of a square or circular box divided into two halves. The specimen, contained in the box, is subjected to a constant normal load while an increasing horizontal force is applied to one of the sections of the shear box. This force causes a shear failure along the juncture between the box sections of this. The shear force and the normal load are measured directly. The rate of strain is adjusted by the speed of the horizontal force applied. The loading unit has V-strips on which the shear box housing rests. The load yoke in these direct shear test apparatus helps counter balance the loading system. The lead screw connected to the shear box housing helps application of shear stress.

Material	Cast Iron
Usage/Application	Chemical Industry
Capacity	2 kW
Voltage	240 V
Language	English
Finishing	Polished
Automation Grade	Semi-Automatic
Color	Green

The apparatus is used for determining the workability of fresh concrete, provided the maximum size of the aggregate does not exceed 38mm. The test is particularly useful for concrete mixes of very low workability where true slump values are not reliable. It consists of two rigid conical hoppers and a cylinder mounted on a rigid metal frame. The lower openings of the hoppers are fitted with hinged trapdoors having a quick release catches. A circular metal plate is provided to cover the top of the cylinder. Supplied complete with one plaster's trowel and one tamping rod both ends rounded.

Material	Mild Steel
Usage/Application	Industrial
Voltage	240 V
Finishing	Polished
Brand	Alpha
Frequency	50 Hz
Surface Finish	Polished
Country of Origin	Made in India

Consists of slump cone fitted with handles and foot pieces in position. Base plate in octagonal shape two clamps slide over the foot grips of a standard slump cone and hold it securely while filling and rodding. A Combination swivel carrying handle. Complete with graduated temping rod 0-60cms long and 16mm dia with 0-30cms scale graduation.

Brand	Engler
Material	Stainless Steel
Usage/Application	Laboratory
Number Of Cups	One
Voltage	240 V
Power Source	Battery
Country of Origin	Made in India

TAR VISCOMETER APPARATUS As per IP 72 and is 1206 standards. It is used for determination the viscosity of road oils and cut back bitumen. It consists S.S. Bath with cup of 10 mm or 4mm orifice and sleeve, Stirrer with lifting clip and ball. The assembly kept on Suitable stand with leveling Screws. Suitable to operate on 220 Volts AC Mains. 

Country of Origin	Made in India
Usage/Application	Laboratory
Material	Mild Steel
Voltage	240 V
Number of Poles	Two
Display Type	manual

We are one of the leading trader and supplier of Laboratory CBR Apparatus with utmost quality. The offered apparatus is basically used for the in-site determination of the strength of soil used in road construction. Our provided apparatus is manufactured at vendors' end using most durable and long lasting components and provides accurate measurements. We are offering this apparatus in various models and are available for our clients at reasonable price.

Material	Mild Steel
Automation Grade	Semi-Automatic
Color	Blue
Display Type	Digital
Usage/Application	Industrial
Voltage	240 V
Finishing	Polished
Phase	Single
Frequency	50 Hz

It is used in large road construction projects has increased considerably in recent years. This apparatus, mounted on a rolled steel joint cantilevered from the back of the truck or fitted to
the underside of a mobile frame, can be used to determine the bearing capacity of soils quickly and efficiency. This method of testing in-situ, using piston penetration, is useful for determining the load carrying capacity in the field, when the in -place density and water contents are such that the degree of saturation is 80% or greater. When the material is coarse grained and cohesionless so that it is not affected b changes in the water content and when the material has been in- place.

Product Type	Impact Testing Machine
Automation Grade	Semi-Automatic
Material	Steel
Brand	Alpha
Usage/Application	Industrial
Color	Blue
Power	2 HP
Shape	Round

We have become a supreme trader and supplier of a huge range of Aggregate Crushing Value Apparatus. This apparatus is used to measure the resistance of an aggregate to crushing and extensively used for various industry applications. The offered crushing apparatus is manufactured at vendors' end using quality tested raw material and modern technology. Besides this, we offer this crushing apparatus to our clients at most affordable price.

Material	Mild Steel
Automation Grade	Semi-Automatic
Usage/Application	Laboratory
Color	White
Finishing	Polished
Frequency	50 Hz
Power	2 HP

Consolidation test is un-dimensional test considered extremely important in soil mechanics. Sample taken from adjacent areas of a single site show differential settlement even when tested using same techniques. Soil of similar strength may show varying consolidation. Samples are very carefully prepared and vertical settlement of the specimen in saturated or drained conditions carefully recorded when known load is applied.

Warranty	1 Year
Material	SS
Brand	Alpha
Surface Finishing	Polished
Power Consumption	0.5 HP
Power Supply	Electric
Country of Origin	Made in India

The autoclave is suitable for conducting accelerated soundness tests on cements or the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure. It consists of a stainless steel cylinder with a welded heat insulated metal housing attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge. special rack to hold specimens above water level in the autoclave and in a vertical position to expose them in the same manner. A Digital PID Controller is fitted for controlling the desired temperature.

Usage/Application	Laboratory
Brand	Blain Air
Material	SS
Voltage	240 V
Power	2 HP
Color	White
Frequency	50 Hz
Is It Portable	Portable
I Deal In	New Only

We offer our customers with Blain Air Permeability Apparatus that are widely used for knowing the fineness of cement in terms of specific surface expressed. This calculation lies in total surface area in square centimeters per gram of cement. Come in a variable flow type air permeameters, our products available at affordable prices.

Material	SS
Brand	Gillmore
Voltage	240 V
Usage/Application	Industrial
Color	White
Accuracy	100%
Power	2 HP
Surface Finish	Polished
Automation Grade	Semi-Automatic

Gillmore Needle ApparatusGillmore Needle Apparatus that is widely desired in the market. The proffered collection is widely demanded as it is used for the determination of time stetting of hydraulic cement. Gillmore needle apparatus is provided with a base with two horizontal arms and vertical shaft. 

Automation Grade	Semi-Automatic
Usage/Application	Industrial
Finishing	Polished
Material	SS
Voltage	240 V
Frequency	50 Hz
Phase	Single
Ball Diameter	na
Color	White

The apparatus is used to determine the work ability of Portland cement & concrete. The Kelly ball test is considered to be simple and much faster than the slump test.Twice the Kelly ball reading approximately equals the slump. It consists of a cylinder with a ball shaped bottom and handle. A strip frame, guides the handle and serves as a reference for measuring the depth of penetration. The handle is graduated in mm.

Material	SS
Automation Grade	Semi-Automatic
Phase	Single
Usage/Application	Industrial
Finishing	Polished
Color	White
Brand	Alpha

Also called Softening Point Apparatus. This apparatus is meant for determination of softening point of bituminous materials according to IP 58 and IS 1205. Softening point is that temperature at which the specimen under test becomes soft enough to allow a steel ball of specific dimension to fall a required distance under test condition. The apparatus consists of Glass beaker of heat resistant glass having internal diameter of 8.5 cm X 12 cm depth (approximately), two steel balls each of 9.5mm diameter, two tapered brass rings, two ball guides, ring stand and a hand stirrer.

Number Of Jars	4 Jars
Brand	Alpha
Material	SS
Frequency	50 Hz
Voltage	240 V
Display Type	Digital
Automation Grade	Semi-Automatic

Flocculator/jar test apparatus, model 1922, 1924, 1926 is a flocculation (jar) tests on water and effluent samples. A digital display clearly indicates the speed of the rotational stainless steel paddles. After count down, the paddles stop and an alert sounds. The timer then counts up in minutes in order to measure settling time.
two pre-set programs allow routine speed and time parameters to be input and then selected by simply pressing one button. Parameters are stored in the memory and can be recalled or altered at any time. The intuitive touch sensitive keypad is totally flat for easy cleaning.
It is supplied with stainless steel paddles with adjustable spaces to adjust the depth of the paddles. Rpm measurement arrangement is provided.

Accuracy	100%
Usage/Application	Laboratory
Brand	Omron
Weighing Capacity	200 Gm
Calibration	External
Type Of Weighing Scale	Digital
Capacity	2HP
Automation Grade	Manual

Specification :The density of hardened concrete specimens such as cubes and cylinders can be quickly and accurately determined using a Specific Gravity / Buoyancy Balance. The apparatus consists of a rigid support frame, incorporating a water tank mounted on a platform. A mechanical lifting device is used to raise the water tank through the frame height immersing the specimen suspended below the balance in this Buoyancy Balance. Any type of Electronic Balance fitted with an under bench weighing facility can be fitted. The balance supplied can also be used as a standard weighing device, thus providing a versatile and comprehensive weighing system in the laboratory. (i) Cap. 5 Kg (5000gm) Accuracy 0.5 gm (500mg) (ii) Cap. 15kg (15000gms) Accuracy 1 gm (1000 mg)

Phase	Single
Material	Cast Iron
Voltage	240 V
Automation Grade	Semi-Automatic
Power	2 HP
Usage	Industrial
Frequency	50 Hz

We are a remarkable entity, engaged in trading and supplying a superior quality Ductility Testing Apparatus.The offered testing apparatus is used to evaluate the quality of material on the ability to resist cracking or other surface irregularities.

Material	Mild Steel
Usage/Application	Laboratory
Automation Grade	Semi-Automatic
Display	Digital
Color	White
Finishing	Polished
Country of Origin	Made in India

Our company is engaged in the manufacture, export, and supply of Triaxial Test Apparatus that finds a major application in the determination of stress-strain relationship. Owing to the accurate measurement and low power consumption, the proffered range is massively desired. Stepper motor drive and microprocessor controlled drive mechanisms are used for the apparatus.