Pump Unit

Type of Motor | AC |
Machine Type | Manual |
Brand | Amspa |
Max Flow Rate | 80 LPM |
Head | 15 Meter |
RPM | 2800 |
Phase | Single Phase |
Power | 1 HP |
Model Number | B-80TSN120 |
Suction | 5 Meter |
Explosion Proof Induction Motor with Aluminum Casing, Electric Self Priming Pump for flammable media. Gasoline, Diesel, Kerosene. Rotary Vane Pump with built in bypass valve. Built in Filter. Continuous working principle. Applicable for transferring media from barrel, underground and overhead tanks.
View Complete Details

Brand | AMSPA |
Power Source | Air Operated |
Max Flow Rate | 70 LPM |
Head | 4 Meter |
Material | Stainless Steel |
Material Grade | SS316 |
Inlet Diameter | 40 mm |
Outlet Diameter | 25 mm |
Air Hose Diameter | 8 mm |
Safety Valve Pressure | 0.03 MPa |
Air Pressure | Greater Than 0.1 MPa |
Length of The Pump | 1.12 Meter |
Weight | 6 Kg |
Pump adapts to both MS & HDPE Barrel.
HDPE barrel adaptor optional at additional cost.
Very Versitile in application - If you have several flammable solvents and do not wish to invest in multiple pump this can be useful as it is easy to clean and purge ( is hollow ) to avoid issue to do with chemical contamination. Low Maintenance
View Complete Details

Power Source | AC Powered |
Phase | Single Phase / Three Phase |
Motor Horsepower | 1 HP |
Design Type | Gear Pump |
Max Flow Rate | 75 LPM |
Model | B-75 |
Head | 30 m |
Brand | AMSPA |
Model Name/Number | B-75 |
Maximum Pressure | 3 Bar |
Frequency | 50 Hz |
Voltage | 220V / 415V |
Type Of Pump | Internal Gear Pump(Gerotor) |
Usage/Application | Oil |
Maximum Discharge Flow | 75 LPM |
The pump is widely used in oil drum carrier, oil refinery, electric power plant, substation and oil depot.
Additional Information:
- Item Code: B-75
- Delivery Time: Immediate
View Complete Details

Brand | Amspa |
Power Source | DC Powered |
Material | Pump Body: Brass, Shaft: Steel |
Voltage | 12V DC |
Seal | Fluoro Elastomer Lip Seal |
Flow Capacity | 14 Litre Per Minute |
Self-Priming | Max. Lift 3M, Can be mounted in any position |
Twin Core Wire Current Draw | 6 Amp (max. 10 Amp) |
Dimensions | Length 155.5mm x Width 119mm x Height 103mm |
Model Number | B-14 |
This pump is a gear pump, the best kind of pump for oil scavenging. Bronze gears. Brass pump body.
12v DC with splash resistant wiring. Two 1/2" barbed fitting included.
The same oil that it scavenges also lubes up its gears. These pumps are suitable for remote systems as oil scavenge pumps.
View Complete Details

Head | 30 Meter |
Usage/Application | Industrial |
Motor Horsepower | 1 HP |
Brand | Amspa |
Material | Cast Iron |
Nominal Displacement | 75 LPM |
Phase | Single Phase 220V |
Working Principle | Double Gears |
Maximum Operating Temperature | 80 degree C |
Max Viscosity | 300 CST |
Drive Rating | 1 HP |
In/Out Caliber | 25mm |
Discharge Side Pressure | 3 Bar |
Flow Rate | 75 LPM |
Negative Suction | 3 Meter |
Voltage | 230 V |
View Complete Details

Motor Horsepower | 1 HP |
Brand | AMSPA |
Max Flow Rate | 80 LPM |
Head | 15 M |
Model | B-80Ex |
Motor Phase | Single Phase |
Material | Cast Iron |
Color | Blue |
Flameproof Gasoline Transfer Pump ( B-80 Ex )
Main Voltage 220V transfer pump for transfering diesel, petrol , kerosene. Cast Iron rotary vane pump. Induction motor with aluminium casing, steel rotor. Build in bypass valve. Built in filter, easily accessible for cleaning , self priming, explosion proof and weather proof motor, continuous working principle. Pump inlet / outlet 1". Flow rate 80 LPM. Power 1 HP, Speed 2800 RPM. Suction 5 meters, Head 15 meters.
View Complete Details

Brand | Amspa |
Type | Rotary Vane Pump |
Body Material | Cast Iron |
Voltage | 220 V |
Head | 7 Meters |
Max. Speed | 2800 RPM |
Power | 550W |
Pump Inlet | 1" |
Outlet | 1" |
Maximum Flow Rate | 60 LPM |
Suction | 5 Meter |
For fueling Diesel Oil, kerosene, not for gasoline. Heavy Fuel Oil transfer pump. Cast Iron casing rotary vane pump. Steel rotor, built in bypass valve. Built in filter, self priming. induction motor with aluminium casing. Continuous duty. Applicable in transferring fuel from barrels, fueling machine on construction site. Fuel transfer from stationary tanks.
Additional Information:
- Item Code: B-60
View Complete Details
- Developed and Managed by IndiaMART InterMESH Limited