Anjana Metal Industries

We at Anjana Metal Industries Secunderabad  a leading BS 10 Table F Flanges Dimensions. BS 10 Table F Flanges are stocked or available in the following range of materials and sizes for the oil, gas, petrochemical and allied industries. Pipes with BS 10 Table F Flanges can be assembled and disassembled easily. SS BS 10 Table F Flanges can be flanges.

As a BS 10 Table F Flanges Dimensions. we offer these BS 10 stainless steel Table F rjt flanges, BS 10 carbon steel Table F blind flanges, BS 10 Alloy steel Table F weld neck flanges, BS 10 stainless steel Table F slip on flanges, BS 10 carbon steel Table F socket weld flanges in all standard in which the common world standards include ANSI/ ASME

Additional Information:

• Packaging Details: BOX

Anjana Metal Industries  is a leading supplier of the Stainless Steel 321 Flanges in different scales, shapes and standards. The material is strong with 30ksi yield strength and 75ksi minimum tensile strength. The material is hard with the Brinell hardness score of 217. The dimensions of the flanges range with different standards. There are ANSI, B, ASA, and APA standards and the nominal bore sizes range from ½ inches to 48 inches. The SS 321 Blind Flange is one type of special flange that is used to close a pipe.

Class / Table: ASA 150 BS-10 R/F Blind/Dummy (Perfect Thickness)

Standard / Pressure: As Per BS-10,ASA,ISS OR DIN.

Working Medium: Oil, Gas, Steam, Petroleum, Air, Water.

Finish: One Sided Machined.

Make: Indian / Imported.

Material M.O.C: M.S (Mild Steel)

Ideal For Petroleum, Oil, Gas, Refinery, Steam Line, Fire Fighting And All Type Of Heavy Industries.

As compared to stainless steel grades, the carbon steel pipe flanges have a higher carbon content. This high content of carbon is what gives the carbon steel plate flanges a lower melting point. An increased carbon content in the cs slip on flanges makes them more malleable. Further, these flanges have good durability and they offer better heat distribution properties.

MS Flanges are manufacturer as per ASME B16.5 150#, 300#, 600#, 900#, 1500#, 2500# | BS EN1092-1 PN 10/16/25/40 | BS 10 Table D, E. All raw materials purchased by Anjana Metal Industries to manufacture Mild steel slip on flanges is fully traceable to mill source. All mild steel flanges manufacturers in India, with raw materials coming from reputed Indian and Overseas Mills.
IS 2062 Mild Steel Flanges Specifications
EN Standard Q345 Mild Steel Flange

6Bar 25Bar 16Bar 10Bar 40Bar

DIN Standards of MS Flanges

6Bar 10Bar 16Bar 25Bar 40Bar

PN6, PN16, PN25, PN10 PN40, PN64

IS 2062 Mild Steel Flanges JIS Standard

5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K

Black Mild Steel Flanges Standard ANSI

Class 150 LBS, 1500 LBS, 900 LBS, 600 LBS, 300 LBS, 2500 LBS

Standard UNI Mild Steel Flanges

6Bar 10Bar 16Bar 25Bar 40Bar

ASME B16.5 Mild Steel Flange size range1/2" (i. e. 15 NB) to 48" (i. e. 1200NB) DN10~DN5000Application & uses of Mild Steel Flanges

Chemical

Oil & Gas

Power

Nuclear power (mostly seamless)

Heavy oil refineries

Construction

Shipbuilding industries & others.

Supporting material for Mild Steel Alloy FlangeRing Joint, Gasket, Flange BoltsMild Steel IS 2062 Flange Connect Type/ Flange Face Type

Lap-Joint Face (LJF), Raised Face (RF), Large Male-Female (LMF), Ring Type Joint (RTJ), Flat Face (FF), Small Tongue & Groove

Pressure Rating of Mild Steel Flanges
MS Alloy Flanges ratings as per ASME/ASTM B16.5 – B16.36 – B16.48

Class 150 (lb) up to 24"

Class 300 (lb) up to 20"

Black Mild Steel Class 600 (lb) up to 20"

Low Carbon Mild Steel Class 900 (lb) up to 16"

Class 1500 (lb) up to 10"

Class 2500 (lb) up to 8"

Mild Steel Gr 250 Flanges pressure rating as per DIN – EN1092-1 – EN1759-1 – NFE – BS10/BS4504 – ISO7005-1

Mild Steel Alloy PN2.5/ PN06/ PN10 up to DN800

IS 2062 Mild Steel PN16/ PN25/ PN40 up to DN600

Black Mild Steel PN63/ PN100 up to DN500

PN160/ PN250 up to DN300

PN320/ PN400 up to DN200

The ASTM A105 specifies different types of flanges, which can include various grades of stainless steel material. The ASTM A105 Carbon Steel Blind Flanges are made of forged carbon steel and are ideal for high-temperature applications. We are one of the top ASTM A105 CS BLRF Flanges producers in India, capable of meeting our client’s requirements. We produce different types of carbon flanges to meet the all-around needs of various industries. Some of the standard ASTM A105 Flanges we manufacture would include:

We ANJANA METAL INDUSTRIES, are one of the Leading, manufactures & suppliers of Alloy Steel Flanges
Alloy Steel Flanges Specifications
Alloy Steel Flanges Standard
ASTM / ASME A/SA 182 & A 387
Alloy Steel Flanges Grade
ASTM A182 F1, F5, F9, F11, F12, F22, F91.
Types of Alloy Steel Flanges
Alloy Steel Socket Weld Flanges, 
Alloy Steel Slip On Flanges
Alloy Steel Blind Flanges
Alloy Steel Lapped Flanges
Alloy Steel Screwed Flanges
Alloy Steel Weld Neck Flanges
Alloy Steel Long Weld Neck Flanges
Alloy Steel Reducing Flanges
Alloy Steel Spectacle Flanges
Alloy Steel Ring Joint Flanges

SS 304 Flange Standards / Types And Pressure Class :
 
ASME/ANSI B 16.5Welding Neck Flange, Slip on Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint FlangePRESSURE CLASS150, 300, 400, 600, 900, 1500, 2500ASME/ANSI B 16.47Welding Neck Flange, Blind Flange [Series A & B]PRESSURE CLASS75, 150, 300, 400, 600, 900ASME/ANSI B 16.36Welding Neck Flange, Slip on Flange, Threaded FlangePRESSURE CLASS300, 400, 600, 900, 1500, 2500BS 4504 SEC 3.1Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank FlangePRESSURE CLASSPN 2.5 TO PN 40BS 4504[PART 1]Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, Plate Flange, Loose Plate With Weld On Plate Collar, Blank FlangePRESSURE CLASSPN 2.5 TO PN 400BS 1560 BOSSWelding Neck Flange, Socket Welding Flange, Slip-On Flange, Blind Flange, Screwed Boss Flange, Lapped Flange PRESSURE CLASS150, 300, 400, 600, 900, 1500, 2500 BS10Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind FlangeTABLED, E, F, HDIN FLANGESDIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 PRESSURE CLASS PN 6 TO PN 100

suppliers of ASME/ANSI B16.5 carbon steel Weld Neck Flange, stainless steel Weld Neck Flange, alloy steel Weld Neck Flange, ASTM A105/A105N, A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2, A694 F42, F46, F48, F50, F52, F56, F60, F65, F70, A516.60, 65, 70 (Spectacle Blind Flange, Spacer Ring/Spade Flange), WNRF Flanges

Additional Information:

• Delivery Time: 1
• Packaging Details: BOX

• Available Diameter- 10 inch, 15 inch
• It produces an endurance strength of weld neck flanged assembles equivalent to that of a butt welded joint which, if done properly, is the same as that of a seamless pipe. This type of flange is preferable for very severe service conditions such as high-pressure, sub-zero or elevated temperatures.
• Slip-on flanges
• Socket-welding flange
• Lap joint flanges
• Blind flanges
• Orifice flanges

Additional Information:

• Delivery Time: REDDY

Our company is highly esteemed in offering MS Orifice Flange.
 orifice flange union is used to measure, or meter, the amount of pressure drop through the orifice plateorifice flange assembly consists of a pair of flanges, orifice plate, bolts, nuts, gaskets, jacking screws and plugs

Anjana Metal Industries is fulfilling all our valuable customers’ requirements, particularly in terms of product quality, manufactured by using superior quality of Stainless steel plate flanges. Our manufacturing plant also has a well-skilled team of experts and experienced possessing all the vast good skills and knowledge of flanges development. The experts supervise all the staffs at all the production level of these Stainless steel plate flanges to achieve the best quality of products. To make the perfect quality of these Stainless steel plate flanges, we are conducting the highest quality through the testing process under destructive and non-destructive quality check. Then, without causing any defects to our excellent quality of Stainless steel plate flanges, we pack the produced products while delivering safer and damage-free transit to the buyers globally.

Class /Table: Table ASA 150# Class S/O Raised Face Slipon.

Standard / Pressure: As Per BS-10,ASA,ISS OR DIN.

Working Medium: Oil, Gas, Steam, Petroleum, Air, Water.

Finish: One Sided Machined.

Make: Indian / Imported.

Material M.O.C: M.S (Mild Steel)

Ideal For Petroleum, Oil, Gas, Refinery, Steam Line, Fire Fighting And All Type Of Heavy Industries.

A flange can also be a plate or ring to form a rim at the end of a pipe when fastened to the pipe (for example, a closet flange). A Blind/Dummy flange is a plate for covering or closing the end of a pipe. A flange joint is a connection of pipes, where the connecting pieces have flanges by which the parts are bolted together.

We Do Also Manufacture Custom Made Flanges, Lap Joint Flanges, Weld-Neck Flanges, Socket Weld and Threaded Flanges

Which Includes SORF, SOFF, BLRF, BLFF, WNRF (XS, XXS, STD & Schedule 20, 40, 80), WNFF (XS, XXS, STD & Schedule 20, 40, 80), SWRF (XS & STD), SWFF (XS & STD), Threaded RF, Threaded FF & LJ, with sizes from 1/2" to 16"

According to All world standards Which include ASA/ANSI/ASME (USA), PN/DIN (European), BS10 ) Or as Per Customer Drawings & Requirements.

Stainless Steel Reducing Flanges :
ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L

Duplex & Super Duplex Steel Reducing Flanges :
ASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61

Carbon Steel Reducing Flanges :
ASTM / ASME A/SA 105 ASTM / ASME A 350 , ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F706

Low Temperature Carbon Steel Reducing Flanges : ASTM A350, LF2, LF3

Alloy Steel Reducing Flanges :
ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91

Copper Alloy Steel Reducing Flanges : ASTM SB 61 , SB62 , SB151 , SB152 UNS No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200

ANJANA METAL INDUSTRIES offers a wide range of long weld flanges. It helps in high pressure and the need for a hub that is long and tapered are what weld neck flanges are most often used for. Specifying the schedule of pipe that it will be utilized for is of utmost importance when ordering. This type of flange is excellent for use in environments involving extreme temperature fluctuations and excessive handling and bending.

It is required when an extended neck is required. It acts as a boring extension. It is used in chemical and petroleum industries and used in residential and commercial buildings. It performs well where there is level of stress and temperature fluctuate. Long weld neck flanges are built in a variety of lengths, size and dimensions according to the need of the customers.

Class / Table: Table  ND 10/16 S/O R/F (Perfect Thickness)

Standard / Pressure: As Per BS-10,ASA,ISS OR DIN.

Working Medium: Oil, Gas, Steam, Petroleum, Air, Water.

Finish: One Sided Machined.

Make: Indian / Imported.

Material M.O.C: M.S (Mild Steel)

Ideal For Petroleum, Oil, Gas, Refinery, Steam Line, Fire Fighting And All Type Of Heavy Industries.

A flange can also be a plate or ring to form a rim at the end of a pipe when fastened to the pipe (for example, a closet flange). A Blind/Dummy flange is a plate for covering or closing the end of a pipe. A flange joint is a connection of pipes, where the connecting pieces have flanges by which the parts are bolted together.

We Do Also Manufacture Custom Made Flanges, Lap Joint Flanges, Weld-Neck Flanges, Socket Weld and Threaded Flanges

Which Includes SORF, SOFF, BLRF, BLFF, WNRF (XS, XXS, STD & Schedule 20, 40, 80), WNFF (XS, XXS, STD & Schedule 20, 40, 80), SWRF (XS & STD), SWFF (XS & STD), Threaded RF, Threaded FF & LJ, with sizes from 1/2" to 16"

According to All world standards Which include ASA/ANSI/ASME (USA), PN/DIN (European), BS10 (British/Australian), and JIS/KS (Japanese/Korean) Or as Per Customer Drawings & Requirements.

Flanges are pipe fittings that are used to connect pipes or fittings together to perform different functions. They have a raised part so that they could be attached well to the other component either by welding or by bolting. Mild Steel Flanges are common in usage as they provide a medium range of strength and corrosion resistance in a balance. Dinesh Industries is a Mild Steel Flanges manufacturer in India and the production includes various types of MS pipe flange component. There are different types of materials used for different applications. There are also different methodologies producing the flanges. The Cast iron flanges are used in applications that prioritize strength over corrosion resistance.