X

Anmol Chemicals

Chinch Bunder, Mumbai, Maharashtra

| GST  27AADPK4791P1Z1

| Verified Supplier

View Mobile Number 100% Response Rate
Hi
I agree to the terms and privacy policy
Verifying...
1

Have a requirement?
Get Best Price

Hi
I agree to the terms and privacy policy
Verifying...
1

Have a requirement?
Get Best Price

Old Spice

Pioneers in the industry, we offer Sodium Acetate Trihydrate, Ammonium Chloride, Calcium Chloride Dihydrate or Fused, Calcium Chloride Anhydrous Pure, Magnesium Chloride and Potassium Chloride from India.

Sodium Acetate Trihydrate
Interested in this product?
Get Best Quote

Sodium Acetate USP
C2H3NaO2-3H2O 136.08

Assay— Sodium Acetate contains three molecules of water of hydration, or is anhydrous. It contains not less than 99.0 percent and not more than 101.0 percent of C2H3NaO2, calculated on the dried basis.
Packaging and storage— Preserve in tight containers.
Labeling— Label it to indicate whether it is the trihydrate or is anhydrous. Where Sodium Acetate is intended for use in hem dialysis, it is so labeled.
Identification— A solution responds to the test for Sodium and for Acetate.
pH: between 7.5 and 9.2, in a solution in carbon dioxide-free water containing the equivalent of 30 mg of anhydrous sodium acetate per mL.
Loss on drying— Dry at 120 to constant weight: the hydrous form loses between 38.0% and 41.0% of its weight, and the anhydrous form loses not more than 1.0% of its weight.
Insoluble matter— Dissolve the equivalent of 20 g of anhydrous sodium acetate in 150 mL of water, heat to boiling, and digest in a covered beaker on a steam bath for 1 hour. Filter through a tarred filtering crucible, wash thoroughly, and dry at 105 : the weight of the residue does not exceed 10 mg (0.05%).
Chloride— A portion equivalent to 1.0 g of anhydrous sodium acetate shows no more chloride than corresponds to 0.50 mL of 0.020 N hydrochloric acid (0.035%).
Sulfate— A portion equivalent to 10 g of anhydrous sodium acetate shows no more sulfate than corresponds to 0.50 mL of 0.020 N sulfuric acid (0.005%).
Calcium and magnesium— To 20 mL of a solution containing the equivalent of 10 mg of anhydrous sodium acetate per mL add 2 mL each of 6 N ammonium hydroxide, ammonium oxalate TS, and dibasic sodium phosphate TS: no turbidity is produced within 5 minutes.
Potassium— Dissolve the equivalent of 3 g of anhydrous sodium acetate in 5 mL of water, add 1N acetic acid drop wise until the solution is slightly acidic, and then add 5 drops of sodium cobalt nitrite TS: no precipitate is formed.
Aluminum: (where it is labeled as intended for use in hem dialysis)— the limit is 0.2µ =g per g.
Heavy metals—the limit is 0.001%.
Organic volatile impurities: meets the requirements.

View Complete Details

Yes, I am interested!

Ammonium Chloride
Interested in this product?
Get Best Quote

Ammonium Chloride

Get Latest Price

NH4Cl 53.49
Ammonium Chloride BP

Assay— Ammonium Chloride contains not less than 99.5 percent and not more than 100.5 percent of NH4Cl, calculated on the dried basis.
Packaging and storage— Preserve in tight containers.
Identification— A solution (1 in 10) responds to the tests for Ammonium and for Chloride
pH: between 4.6 and 6.0, in a solution (1 in 20).
Loss on drying— Dry it over silica gel for 4 hours: it loses not more than 0.5% of its weight.
Residue on ignition— Add 1 mL of sulfuric acid to about 2 g, accurately weighed, and heat the mixture gently until volatilization is complete: the residue is white, and when ignited, not more than 0.1% of nonvolatile substance remains.
Limit of thiocyanate— Acidify 10 mL of a solution (1 in 10) with hydrochloric acid, and add a few drops of ferric chloride TS: no orange-red color is produced.
Heavy metals: 0.001%.

View Complete Details

Yes, I am interested!

Calcium Chloride Dihydrate or Fused
Interested in this product?
Get Best Quote

Assay— Calcium Chloride contains an amount of CaCl2 equivalent to not less than 99.0 percent and not more than 107.0 percent of CaCl2·2H2O.
Packaging and storage— Preserve in tight containers.
Labeling— Where Calcium Chloride is intended for use in hem dialysis, it is so labeled.
Identification— A solution (1 in 10) responds to the tests for Calcium and for Chloride.
pH: between 4.5 and 9.2, in a solution (1 in 20).
Aluminum (where it is labeled as intended for use in hem dialysis)— the limit is 1 4g per g.
Iron, aluminum, and phosphate— To a solution (1 in 20) add 2 drops of 3 N hydrochloric acid and 1 drop of phenolphthalein TS. Then add ammonium chloride–ammonium hydroxide TS, drop wise, until the solution is faintly pink, add 2 drops in excess, and heat the liquid to boiling: no turbidity or precipitate is produced.
Heavy metals— the limit is 0.001%.
Limit of magnesium and alkali salts— Dissolve 1 g in about 50 mL of water, add 500 mg of ammonium chloride, and proceed as directed in the test for Limit of magnesium and alkali salts under Calcium Carbonate, beginning with “heat the solution, and boil for 1 minute”: the weight of the residue does not exceed 5 mg (1.0%).
Organic volatile impurities meets the requirements.

View Complete Details

Yes, I am interested!

Calcium Chloride Anhydrous Pure
Interested in this product?
Get Best Quote

Calcium Chloride Hexahydrate is used in the pharmaceutical industry as well as for passive cooling applications as a latent heat energy storage material. We expertise in the manufacture of CaCl2.6H2O and are totally equipped to offer the best grade for latent heat storage applications with user-specified melting temperature (m.p.).

View Complete Details

Yes, I am interested!

Magnesium Chloride
Interested in this product?
Get Best Quote

Magnesium Chloride

Get Latest Price

Muby Chemicals, established in 1976, is the pioneer manufacturer of Chlorides, and particularly Magnesium Chloride including Magnesium Chloride Anhydrous, Hexahydrate & Magnesium Chloride IP BP USP ACS Analytical Grade FCC Food Grade, Crystals Powder Lumps etc. We know about Magnesium Chloride better than any other vendor in the world.

View Complete Details

Yes, I am interested!

Potassium Chloride
Interested in this product?
Get Best Quote

Potassium Chloride

Get Latest Price

Potassium Chloride USP
KCl 74.55

Assay— Potassium Chloride contains not less than 99.0 percent and not more than 100.5 percent of KCl, calculated on the dried basis.
Packaging and storage— Preserve in well-closed containers.
Labeling— Where intended for use in hem dialysis, it is so labeled.
Identification— A solution (1 in 20) responds to the tests for Potassium and for Chloride.
Acidity or alkalinity— To a solution of 5.0 g in 50 mL of carbon dioxide–free water add 3 drops of phenolphthalein TS: no pink color is produced. Then add 0.30 mL of 0.020 N sodium hydroxide: a pink color is produced.
Loss on drying — Dry it at 105 for 2 hours: it loses not more than 1.0% of its weight.
Iodide or bromide—

View Complete Details

Yes, I am interested!

Sodium Acetate Anhydrous
Interested in this product?
Get Best Quote

Sodium Acetate Anhydrous

Get Latest Price

Sodium Acetate Anhydrous CAS Number 127-09-3, Sodium Acetate Trihydrate CAS Number 6131-90-4, EINECS EC Number 204-823-8, HS Code: 291522**

View Complete Details

Yes, I am interested!

Sodium Diacetate
Interested in this product?
Get Best Quote

Sodium Diacetate

Get Latest Price

We manufacture Sodium Diacetate also called Sodium Di acetate from virgin raw material by reaction. We tailor make it to suit the grain size as specified by the buyer.

SODIUM DIACETATE (diacetato de sodio, natriumdiacetat) has long been used as a food additive. Sodium Diacetate is a free flowing, dust free and readily available source of Acetic acid , the acid familiar to the housewives. Sodium Diacetate (E262) provides a solid source of acetic acid for use in dry products.

View Complete Details

Yes, I am interested!

Sodium Thiosulphate Pentahydrate
Interested in this product?
Get Best Quote

Na2S2O3·5H2O 248.19
Sodium Thiosulfate USP
Contains not less than 99.0 percent and not more than 100.5 percent of Na2S2O3, calculated on the anhydrous basis.

Packaging and storage— Preserve in tight containers.
Identification—
A: To a solution (1 in 10) add a few drops of iodine TS: the color is discharged.
B: A solution (1 in 10) responds to the tests for Sodium and for Thiosulfate.
Water— Dry about 1.0 g, accurately weighed, in vacuum at 40 o to 45o for 16 hours: it loses between 32.0% and 37.0% of its weight.
Calcium— Dissolve 1 g  Sodium Thiosulfate in 20 mL of water, and add a few mL of ammonium oxalate TS: no turbidity is produced.
Heavy metals—: the limit is 0.002%.

View Complete Details

Yes, I am interested!

Sodium Thiosulphate Anhydrous
Interested in this product?
Get Best Quote
Parameters     Specifications
Appearance     Fine Crystalline
pH of 10% Aqueous Solution     6.5 to 8
Assay     98% minimum
Sulphites & Sulphates     1% max
Heavy Metals     Less than 5 ppm
Iron     Less than 10 ppm

View Complete Details

Yes, I am interested!
Tell us what you need, and we’ll help you get quotes
Tell us what you
need
Receive seller
details
Seal the deal
Pay with IndiaMART
Tell us what you need, and we’ll help you get quotes
I agree to the terms and privacy policy