X

AP Motronix Private Limited

Ramanthapur, Hyderabad, Telangana

| GST  36AABCA7296C1ZQ

is a member of IndiaMART

| Verified Supplier

|

View Mobile Number78% Response Rate

Products & Services

+View All

Electro-Mechanical Actuators

Leading Manufacturer of De Humidifier Actuator, Damper Actuator and AR Series Valve from Hyderabad.

De Humidifier Actuator
Interested in this product?
Get Best Quote

De Humidifier Actuator

Rs 7,500 / PieceGet Latest Price

This AC motor unit compared to the AR4 type is compact in size. It consists of our Geared Servo Motor (GSM) along with suitable reduction gear box. The motor is 230 (or 115) V AC, 50Hz, 1Φ. The motor is compact, quickly reversible and is impedance protected to withstand continuous overload of locked rotor condition. The gears are hobbed in-house and assembled selectively for extended performance. For less than a revolution, the unit can be fitted with limit switches (field adjustable) for extreme ends cut off; for continuous rotation, the switch/cam/potentiometer are absent.

Specifications:

  • Supply Voltage: AC, 230V, 50Hz, 1Φ
  • Power Consumption: 20 Watts.
  • Stroke: Continuous or Factory set at 900, 1600 or 2700(Field adjustable).
  • Auxiliary Switch (Optional): 2.5A, 250V, 50Hz, NO or NC(Operated at only one fixed point).
  • Feedback Potentiometer: 135Ω standard matched to stroke angle of either 900, 1600 or 2700(The maximum permitted power dissipation for feedback potentiometer is 1W for 900, 1.5W for 1600, and 2W for 2700 stroke angle).
  • Torque-Speed capabilities: Total gear ratio is adjusted at factory to achieve suitable torque-speed combination.

View Complete Details

Yes, I am interested!

Damper Actuator
Interested in this product?
Get Best Quote

Damper Actuator

Rs 9,500 / UnitGet Latest Price

DEC 1700 series are reversing proportional motors used to operate dampers or valves in Electric Modulating Circuits. Electric actuators are designed to meet the requirement of damper control, valve control applications where it is generally required to drive the load through less than one complete revolution either direction and to stop instantaneously at any point of the stroke. Such devices, sometimes also called as Modulating Motors are extensively used for Air-Conditioning, Boiler applications.

Actuator type DEC 1700 consists of a reversible servomotor connected to the output shaft of the device through a series of precision hobbed gears. The gear train is sealed with high grade and high temperature stable grease, thereby ensuring permanent lubrication. Cam operated limit switches stop rotation of the output shaft at predetermined CW and CCW limit of travel. The stroke angle is factory set but can also be altered in field. Thus, by supplying power at the proper terminals, the output shaft can be positioned anywhere within the set stroke angle.

The actuator type DEC 1701 is similar to DEC 1700 in all respect, but has an additional in built feedback potentiometer. Also an auxiliary cam operated micro switch can be fitted internally in both the types, as an optional feature for ON-OFF control of pumps, fans etc. With DEC 1702, the actuator can be run with the Electronic Positioner of 4-20mA input signal. DEC 1704 model is DEC 1701 type with a Position Transmitter of 4-20 mA output signal.

Features:

  • These are with line voltage or low voltage motors
  • With single turn actuators, the stroke is fixed at 900 1600, or 2700 and is also field adjustable
  • Models for two-position (ON-OFF) control, fitted with feed back potentiometer and proportional controller with 4-20mA
  • Rated for ambient -400C to +500C
  • Available with internal cam adjusted auxiliary switches

 

Electrical Specifications:

  • Supply Voltage: 24, 110, 230 VAC, 50/ 60Hz, 1
  • Power Consumption: 20 Watts
  • Stroke: Factory set at 900, 1600, or 2700. (Field adjustable)
  • Auxiliary Switch (Optional): 2.5A, 250V, 50Hz, NO or NC. (Operated at only one fixed point)
  • Feedback Potentiometer: 135Ω standard matched to stroke angle of either 900, 1600, or 2700. (The maximum permitted power dissipation for feedback potentiometer is 1W for 900, 1.5W for 1600, and 2W for 2700 stroke angle)
  • Electronic Controller: 4-20 mA Input Signal
  • Torque-Speed capabilities: Total gear ratio is adjusted at factory

 

 

View Complete Details

Yes, I am interested!

AR Series Valve
Interested in this product?
Get Best Quote

AR Series Valve

Rs 10,000 / Piece(s)Get Latest Price

The AR series of valve and damper actuators come in two sizes. These actuators drive the load through less than one complete revolution in both directions and stop instantaneously at any point of the stroke. With the addition of a worm gear system the actuators can be used to operate multi-turn valves. The position of the output shaft can be controlled with a 4-20mA controller. For feedback, the actuator is equipped with a potentiometer.

Standard Features:

  • These are with line voltage or low voltage motors
  • In case of single turn actuators, the stroke is fixed at 900, 1600, or 2700 and is also field adjustable
  • Models for two-position (ON-OFF) control and also for three stage position (min.switches 3) control. Max. Switches 7 nos (H)
  • Spur gear train lubricated permanently
  • Rated for ambient -400C to +550C

View Complete Details

Yes, I am interested!
All Rights Reserved (Terms of Use)