X
View Mobile Number84% Response Rate

Products & Services

+View All

Concrete Repair Products

Leading Manufacturer of Fibre Glass Murga Jali, Steel Fibers, Epoxy Bonding Agents, Epoxy Concrete Repair Compound, Acrylic Bonding Agent and Concrete Curing Compound from Nagpur.

  • Fibre Glass Murga Jali
  • Fibre Glass Murga Jali
Fibre Glass Murga Jali
Interested in this product?
Get Best Quote

Fibre Glass Murga Jali

Rs 550 / RollGet Latest Price

MaterialFiberglass Mesh
Weave TypePSW
Usage/ApplicationIndustrial
TypePlastic Murga Jali / Fibermesh Murga Jali
Country of OriginMade in India

We are Supplir of MURGA JALI FOR PLASTER from NAGPUR. We have a wide range of FIBERGLASS MESH from 45 GSM to 145 GSM.

View Complete Details

Yes, I am interested!

Steel Fibers
Interested in this product?
Get Best Quote

Steel Fibers

Rs 60 / KilogramGet Latest Price

Minimum Order Quantity: 1000 Kilogram

Usage/ApplicationRoad, Bridge, Tunnels Construction
Packaging Size10-50 Kg
Grade StandardIndustrial Grade
PatternSiliconized
ColorSilver
BrandAquatek Conchem

Steel Fiber for Concrete is defined as short, discrete lengths of steel fibers with an aspect ratio (ratio of length to diameter) from about 20 to 100, with different cross-sections, and that are sufficiently small to be randomly dispersed in an unhardened concrete mixture using the usual mixing procedures.

View Complete Details

Yes, I am interested!

Epoxy Bonding Agents
Interested in this product?
Get Best Quote

Epoxy Bonding Agents

Rs 350 / KgGet Latest Price

Product Brochure

BrandAquatek Conchem
Model NumberAquacrete-BA
Packaging Size1, 5, 10, 20 Kg
Packaging TypeBucket, Bottle
StrengthHigh
ColorWhite
Melt viscosity100 cps at 30 Deg C
BaseAcrylic Polymer
StateLiquid
Service Temperature-20 to 60 Deg C
Specific Gravity1.05 +/- 0.02
Application TemperatureAbove 5 Deg C

Aquacrete-BA is acrylic polymer specially designed for use as an admixture for cementitious mortar and concrete to improve the bonding, flexibility and workability. It can also be used as a bonding coat in combination with cement for increasing the bond coat between new concrete to old conctete, plaster repairs and screeds. 

Area of Application:
  • Bonding aid for plasters and renders, polymer concrete.
  • Repair and patching of concrete areas 
  •  Heavy duty industrial flooring 
  • Water resistant renders and abrasion resistant toppings 
  • Bonding brick slips, tiles, stones, and wall cappings, re-pointing brick work and protection of concrete from dampness. Architectural panels, bridge decks & highway repairs. 

Features and Benefits:
  • Excellent adhesion to a wide range of substrates 
  • Eliminates need for hacking to provide a key for renders, plasters and screeds 
  • Improved toughness and flexibility, reduces chance of cracking 
  • Improved mortar tensile strength & impact resistance 
  • Increased wear resistance, to a wide range of chemicals and salts 

View Complete Details

Yes, I am interested!

Epoxy Concrete Repair Compound
Interested in this product?
Get Best Quote
Packaging TypeBOPP Bags
BrandAquatek Conchem
Usage/ApplicationConstruction
Packaging Size10 Kg
Shelf Life6 Month
Model NameAquacreme ERM (CR)
Over Coating TimeMin 6 hr
Foot TrafficAfter 24 Hrs
Pot Life45mins +/- 5min at 30 Deg C

Area of Application:
  • Flooring of chemical industries, heavy industries, engineering plants, refineries, paint shop, battery rooms, loading and unloading bays and ramps.

Features:

  • Easily applied as a universal screed in all industries with a coating on it.
  • Has excellent load bearing, abrasion resistance and chemical resistance properties.
  • Can also be used for small repairs of floors etc.
  • Seamless, eliminates problem of joints.
  • Gives a nonslip surface.
  • Excellent early strength, hence floor can be used quickly.


Additional Information:

  • Delivery Time: 3 days

View Complete Details

Yes, I am interested!

  • Acrylic Bonding Agent
  • Acrylic Bonding Agent
Acrylic Bonding Agent
Interested in this product?
Get Best Quote

Acrylic Bonding Agent

Rs 300 / KgGet Latest Price

Minimum Order Quantity: 1 Kg

Product Brochure

BrandAquatek Conchem
Packaging Size5-20 kg
Packaging TypeBucket
Usage/applicationIndustrial, Commercial
TypeLatex Based
FormLiquid
Shelf Life18 month
Physical AppearanceLiquid

BONDING AGENT FOR OLD TO NEW CONCRETE

Additional Information:

  • Delivery Time: READY STOCK

View Complete Details

Yes, I am interested!

  • Concrete Curing Compound
  • Concrete Curing Compound
Concrete Curing Compound
Interested in this product?
Get Best Quote
BrandAquatek Conchem
Usage/ApplicationConstruction
Coverage Area3-5 m/kg
TypeWater Based
Physical StateLiquid
Packaging TypeDrum
Viscosity2-4 Pose,at 30 Deg C
Packaging Size30,250 kg
ColorWhite
Specific Gravity0.95 +0.2
Application Temperature5-45 Deg C
Drying TimeApprox 2 Hrs at 30 Deg C
Model Name/NumberAquacare-WB

Aquacure Curing Compound is a white pigmented synthetic wax emulsion based concrete curing compound. On drying, it forms a temporary membrane, which allows the concrete to retain sufficient water for optimum curing. This economical and efficient curing membrane eliminates the need for keeping concrete continuously wet for minimum 28 days. The white pigment reflects the light and heat of sun and minimises the chance of cracking of the surfaces.


Features & Benefits:
  • Water based product. No objectionable fumes
  • Quickly and easily applied by brush or spray application
  • Forms an efficient barrier of moisture for optimum curing of concrete
  • Eliminates the requirement of water in traditional concrete curing method
  • Keeps concrete cool by reflecting light and heat and minimises the chance of surface creacking
  • Breaks down by natural weathering to allow subsequent applications over the cured concrete
  • Suitable for interior and exterior application

Principle Use 
  • All concrete and plaster surfaces which requires curing 
  • Towers Bridge decks 
  • Highways Canals Ramps and Walls 
  • Dry shake hardened floors Hospitals Dams 
  • Industrial floors Runways Retaining walls 
  • RCC repaired sections 

Method of Application:
  • Aquacure - WB Curing Compound should be applied uniformly at the proper coverage rate by brush of spray on the fresh concrete after the surface has become free from bleeding water and final troweling is over. In - situ concrete should be coated with Aquacure - WB Curing Compound as soon as the shuttering is removed. 

Precaution:
  • Ensure complete removal of membrane from the surface before applying any treatment / coating over it. Ensure protection of membrane when applied on horizontal surfaces. 

View Complete Details

Yes, I am interested!

Rust Cleaner
Interested in this product?
Get Best Quote

Rust Cleaner

Rs 250 / KgGet Latest Price

Product Brochure

Size5 kg
ColorBrown
FormLiquid
BrandAquatek Conchem
Model Name/NumberAquacrete-Rust-O-Clean
Specific Gravity1.20+/-0.03
NatureAcidic

Aquacrete-Rust-O-Clean is a liquid rust remover. it is uses effectively to clean rust on steel surfaces  and convert them to oxides and prevent further rusting of steel 

Features & Benefits:
  • Simple application by brush.
  • Effective rust removal
  • Contains no chloride - no chance of enhancing corrosion
  • Cost effective coverage
  • Easy to remove rust even from areas which are difficult to reach

Area of Application:
  • Repairs to concrete structures
  • Maintenance of mild steel structures like tanks. water pipelines shuttering plates and other corroded steel surfaces.
Method of Application:
  • Incase of heavy rusting of steel reinforcement, M.S. Pipeline, M.S. Plates or any other M.S. Surface, remove the loose rust by wirebrushing, chipping, hammering or grinding so that majority of rust scale is removed. Apply Aquacrete-Rust-O-Clean on affected surface by using cotton waste swab with mopping action or by brush application and leave the surface to react with Aquacrete-Rust-O-Clean for atleast 15 to 30 minutes. Due to reaction with Aquacrete-RUST-O-CLEAN the rusty surface will change its colour to original blackish steel - non rusted colour. Remove theloose rust particles by scrubbing or simple dusting with the brush.

Consumption:
  • Consumption will depend on the depth or corrosion. Please establish actual consuption rate at the site by carrying out site trials

View Complete Details

Yes, I am interested!

Micro Concerete
Interested in this product?
Get Best Quote

Micro Concerete

Rs 15 / KilogramGet Latest Price

Minimum Order Quantity: 25 Kilogram

Product Brochure

BrandAquatek Conchem
Usage/ApplicationRapairs of Concrete
Packaging Size25 Kg
Yield11x10 Per Deg C
ColorGray
Packaging TypeBag
Coverage1.3 sqm per 25 kg pack at 10 mm thickness
Flexural Strength0.45 % water absorption after 24 hrs

Aquacrete-Micro-Con is Supplied as a ready to use dry powder which requires only addition of clean water at site to produce a free flowing non shrink repair micro concrete. This is a cementitious material, with additives which impart controlled expansion characteristics in the plastic state whileminimising water demand. This is specially designed for repairs to damaged reinforced elements, particularly where areas is restricted and where vibration of the placed material is difficult or impossible.

Features:
  • Can be pumped or poured into restricted locations.
  • Flowable mortar hence does not require compaction
  • Gaseous expansion system compensates for shrinkage and settlement in the plastic state
  • Develops high initial and ultimate final strengths
  • Offers excellent resistance to moisture ingress
  • Makes repaired sections highly durable
  • Can be applied at 100 mm thickness at one stroke
  • Contains no chloride admixture
  • Rapid strength gain to facilitate early reinstatement

Area of Application:

  • Repair to damaged reinforced concrete elements like beams, columns, wall etc., where access in restricted and compaction is not possible.
  • Re For Jacketing of RCC columns to increase load taking capacity (strengthening of a vertical member)

Technical Information:

  • Clean the surface and remove loose concrete, any dust, oil, paint grease etc.,
  • Expose fully any corroded steel in the repair area and remove all scale and corrosion deposits.
  • Shot blasting is highly recommended.
  • Apply Epoxy Zinc Primer over the cleaned re-bars and allow to dry before continuing Saturate the Substrate with water to prevent absorption of water from the mixed material of
  • The substrate thomogeneous mix is 0 obtained, at 30C
  • Mixing should be done thoroughly with a forced action mixer of adequate capacity, atleast for 5 minutesv Pour or pump the mixed Aquacreme Micro Con into a watertight shuttering in the repaired area, when primer becomes tackyv Cure the repaired surface for minimum 7 days.


Additional Information:

  • Delivery Time: 3 days

View Complete Details

Yes, I am interested!

ACC CLC Block Mortar Fixoblock
Interested in this product?
Get Best Quote

ACC CLC Block Mortar Fixoblock

Rs 18 / KgGet Latest Price

Minimum Order Quantity: 25 Kg

BrandUltraTech
Usage/ApplicationConstruction
FormPowder
ColorGrey
Shelf Life18 Months
Pot Life3 Hrs
Packaging Size40 Kg
Packaging TypeBag

Features:

  • Ready to use thin layer mortar for fixing of ACC/ CLC blocks.
  • Superior Quality
  • High Strength
  • Thin Jointing Mortar
  • Self Curing


Additional Information:

  • Delivery Time: 3 Days

View Complete Details

Yes, I am interested!

Concrete Repair Mortar
Interested in this product?
Get Best Quote

Concrete Repair Mortar

Rs 20 / KilogramGet Latest Price

Minimum Order Quantity: 25 Kilogram

Product Brochure

BrandAquatek Conchem
TypePowder
Packaging SizeBag
Shelf Life18 Months
Model Name/NumberAquacrete Repair Con
BasePolymer Modified Cement
ColorGrey
Bulk Density1.45 +/-0.01 kg/Hr
Water Powder Ratio1/4
Application Time45 min
Application Temperature5-35 Deg C
Compressive Strength2-2.5 kg/m2 per mm Layer Thickness

Aquacrete Repari On is a polymer modified cement based, ready mixed dry mortar for thin layer concrete and masonry repairs. This product is designed for trowel applied easy repairs of concrete surfaces both for interior and exterior.

Features & Benifits:
  • Ready to use with addition of only water. Quick turn around time
  • High compressive. flexural and tensile strength for durable repairs
  • Low Shrinkage non-cracking
  • Suitable for interior and exterior application
  • Resistant to frost & de-icing salt
  • Excellent salt water resistance
  • Suitable for repair with a thickness of 2 mm to 10 mm

Area of Application:
  • Thin patching
  • Filing cracks
  • Resurfacing floor areas
  • Filing honery combs
  • Parking decks
  • Payments and walkways
  • Marine structure
  • Curbs and gutters

Method of Applications:
  • Surface of Preparation : Surface should be free from oll, grease, dirt, debris and loose materials. Mixing: Take the required amount of water in a mixer and then add the powder, mix for 3-5 mins with a drill (for small job) or a paddle type mortar mixer (for large job) until a smooth lump free mix in obtained. Placing : Place the mixed material on the repair area immediately with a trowel to a required thickness, finish by hand trowelling.


Additional Information:

  • Delivery Time: 3 Days

View Complete Details

Yes, I am interested!

  • Cement Concrete Repair Products
  • Cement Concrete Repair Products
Cement Concrete Repair Products
Interested in this product?
Get Best Quote
BrandAquatek Conchem
Usage/ApplicationConstruction
Packaging Size25 Kg
Coverage1.3 sqm per 25 kg pack at 10 mm thickness
Shelf Life18 Months
Flexural Strength0.45 % water absorption after 24 hrs
Model Name/NumberAquacrete Micro Con
Yield11 x 10 per Deg C
Depth of CarbonationAccelerated carbonation test
Compressive Strength100 kg/cm at 1 day - 5 kg/sq cm at 28 days

Aquacrete Micro Con is Supplied as a ready to use dry powder which requires only addition of clean water at site to produce a free flowing non shrink repair micro concrete. This is a cementitious material, with additives which impart controlled expansion characteristics in the plastic state whileminimising water demand. This is specially designed for repairs to damaged reinforced elements, particularly where areas is restricted and where vibration of the placed material is difficult or impossible.

Features:
  • Can be pumped or poured into restricted locations.
  • Flowable mortar hence does not require compaction
  • Gaseous expansion system compensates for shrinkage and settlement in the plastic state
  • Develops high initial and ultimate final strengths
  • Offers excellent resistance to moisture ingress
  • Makes repaired sections highly durable
  • Can be applied at 100 mm thickness at one stroke
  • Contains no chloride admixture
  • Rapid strength gain to facilitate early reinstatement

Area of Application:

  • Repair to damaged reinforced concrete elements like beams, columns, wall etc., where access in restricted and compaction is not possible.
  • ReF or Jacketing of RCC columns to increase load taking capacity (strengthening of a vertical member

Technical Information:

  • Clean the surface and remove loose concrete, any dust, oil, paint grease etc.
  • Expose fully any corroded steel in the repair area and remove all scale and corrosion deposits.
  • Shot blasting is highly recommended.
  • Apply Epoxy Zinc Primer over the cleaned re-bars and allow to dry before continuing Saturate the Substrate with water to prevent absorption of water from the mixed material of Aquacrete Micro Con
  • The substrate should be primed by applying one coat of Aquapoxy-EBA 
  • Aquacrete Micro Con with water (3.75 to 4 litres per 25 kg bag) till homogeneous mix is 0 obtained, at 30C
  • Mixing should be done thoroughly with a forced action mixer of adequate capacity, atleast for 5 minutesv Pour or pump the mixed
  • Aquacrete Micro Con into a watertight shuttering in the repaired area, when primer becomes tackyv Cure the repaired surface for minimum 7 days.

Precuations and Lamitations:
  • It can applied in sections upto 100 mm deep.
  • For thickness more than 100 mm, addition of pre-calculated aggregates may be required. Consult local Pidilite office for more details. Strictly follow water-powder ratio as specified
  • Ensure that the shuttering is 100% watertight
  • Ensure full exposure of reinforcement steel
  • FConsult structural engineer if the diameter of rebar is reduced by more than 20% than original diameter


Additional Information:

  • Delivery Time: 3 Days

View Complete Details

Yes, I am interested!

Foam Concrete

Rs 5,500 / Cubic MeterGet Latest Price

Usage/ApplicationFloors, Roofs, Cold Room, Ice Factory, Power Tanks, etc
Packaging TypeBarrels
Packaging Size25-200 L
ColorGray
BrandAquatek Conchem
Thermal Conductivity0.06-0.105 kcal/m/h Deg C
Model Name/NumberAquacrete-Foamcon
Dosage3-4.5 L/Cubic meter of concrete

Description:
  • Aquatech - Foam Concrete is an unique foaming agent for producing lightweight concrete which can be used as a roof insulating material and for production of light weight precast blocks, density varying between 320-2080 kg/m3 Aquatech - Foam Concrete has been specially developed to provide the maximum thermal insulating effect.

Highlights:
  • Foamed concrete made with Aquatech - Foam Con being light in weight does not increase significantly the dead load on the slab
  • It has good, mechanical stability and is excellent shock absorber
  • It is non-toxic, non-flammable and non-hazardous Chemically inert. Foamed concrete made with Aquatech - Foam Concrete has very low thermal conductivity in the range of 0.06-0.105 kcal/m/h°C.

Method of Application:

  • For Roofs & Walls Foam concrete can be cast in situ on roofs with a density between 320 - 400 kg/m3 
  • It is advisable to use a high speed mixer for making foamed concrete using Aquacrete Foam Con with cement slurry. 
  • Some light weight aggregates such as vermiculite or perlite may be added for getting desired density and to reduce cement consumption of the cement slurry. 
  • A water/cement ratio of 0.6 for the cement slurry is suggested. Best results can be achieved by pre-mixing the Aquacrete Foam Con with water. Curing to be done with sprinkling system for atleast seven days. 
  • A water based silicon water repellent solution may be sprayed on the surface after curing is over to get a non-absorb-ment surface. 
  • Foamed concrete blocks can specially be used for non-load bearing inside walls in multi-storeyed buildings in layers as per required thickness. 
  • The density of non load bearing portion walls can be varied between 400 - 1200 kg/m3 by reduction of sand content in the mix. Waterproofing For Waterproofing of roofs, additional treatment of the roof is to be carried before laying foamed concrete using Aquacrete-Foam Con 
  • Provide a coat of Aquacoat-ACRL polymer cementatious composite on the surface of the roof. 

View Complete Details

Yes, I am interested!

Aquatek Polymer Mortar

Rs 20 / KilogramGet Latest Price

Minimum Order Quantity: 25 Kilogram

Product Brochure

BrandAquatek Conchem
Usage/ApplicationConcrete and Plaster Repair
Packaging Size25 Kg
Packaging TypeBag
Shelf Life12 Months
ColorGrey

Features:
  • For repairs of spalled concrete  and plaster of beams, coloms, slab.


Additional Information:

  • Delivery Time: 3 days

View Complete Details

Yes, I am interested!
All Rights Reserved (Terms of Use)