X
View Mobile Number84% Response Rate

Products & Services

+View All

Precision Grouts

Leading Manufacturer of Epoxy Tile Grout, 3 Part Epoxy Anchor Grout, Precision Grout, Fine Cement Grout, Epoxy Foundation Grout and Non Shrink Instant Plugging Grout Compound from Nagpur.

Epoxy Tile Grout
Interested in this product?
Get Best Quote

Epoxy Tile Grout

Rs 550 / KgGet Latest Price

Product Brochure

Joint Width2mm-20mm
Usage/ApplicationSealing of tile joints in Bathroom. Washroom,Terrace,etc
BrandAquatek Conchem
Pot Life Of Mix60 minutes @ 30 Deg C
Model Name/NumberAqyapoxy-Tile Mate
Tile Size150x150,200x200,300x200,300x300 mm
Tile Thickness5-7 mm
Coverage0.15 - 0.22 kg/sqmt
Shear Strength30KN at 14 Days
Mix ConsistencySmooth Paste
Shell Life12 Months
Setting Time24 hrs @ 30 Deg C
Specific Gravity1.62
NatureThree components (Hardener,Base & Filter)

Description:
  • Aqyapoxy-Tile Mate is a stainless, chemical resistant, hard wearing & impervious tile joint filler with a high degree of resistance to abrasion and impact. Aqyapoxy-Tile Mate can also be used as a high performance epoxy adhesive for fixing ceramic/vitrified tiles.

Area Application:
  • Abattairs, Chemical Plants, Food & Breweries Processing Units, Swimming Pools, Hospitals, Restaurant Kitchens, Shopping Malls and Sports Centres.

Features & Benefits:
  • Stainless and easy to clean
  • Easy to mix and apply
  • Provides hygienic, hard wearing and impervious properties
  • Provides excellent chemical resistant poroperty
  • Non-cracking or powdering
  • Can be cleaned after application with a damp sponge
  • Non-toxic & restricts entry of bacterial dirt.

View Complete Details

Yes, I am interested!

  • 3 Part Epoxy Anchor Grout
  • 3 Part Epoxy Anchor Grout
3 Part Epoxy Anchor Grout
Interested in this product?
Get Best Quote
BrandAquatek Conchem
Usage/ApplicationConstruction
Packaging Size1kg ,5kg
ColorWhite
Compressive Strength600 - 800 kg/cm2
Flexural Strength200 kg/cm2
Model Name/NumberAquagrout-Anchor Set 400
Packing300&500 mm length
Shelf Life6 Months

Aquagrout-Anchor Set-400 resin cartridges contains very high quality resin and its catalyst in precisely measured quantities. These two components are kept separate i.e. the catalyst is separated from the resin by an inner tube.The outer skin contains the resin and the inner tube filled with catalyst, basically floats in the encapsulated resin. The sausage shaped cartridges are designed to be inserted into the drill holes for the purpose of mining or tunnelling.


The rotating bolt during insertion, punctures the outer skin of the cartridge and breaks the inner tube filled with catalyst and thus ensuring a homogeneous mixing of the catalyst and the resin. The resin catalyst mix fills the annular space between the bolt and the bore hole and holds the bolt firmly and permanently.

Feature & Benefits:
  • Pre packed
  • Encapsulated
  • Chloride free


Additional Information:

  • Delivery Time: 3 days

View Complete Details

Yes, I am interested!

Precision Grout
Interested in this product?
Get Best Quote

Precision Grout

Rs 18 / KgGet Latest Price

BrandAquatek Conchem
Usage/ApplicationConstruction
Packaging Size20 Kg
Packaging TypeBag
Type Of AdmixtureSnf Based Admixture
FormPowder
Shelf Life6 Months

Precision Grout is specially formulated for critical grouting operation where high strength, high tolerance and fluidity are required. It comprises of hydraulic setting binders. select grade fillers and expansion control additives, needs only addition of requisite quantity of water at site.

Specification:
  • Meets requirements of corps of Engineers spec. CRD-C-621-83 & ASTM-C-1107

    View Complete Details

    Yes, I am interested!

    Fine Cement Grout
    Interested in this product?
    Get Best Quote

    Fine Cement Grout

    Rs 35 / KgGet Latest Price

    Minimum Order Quantity: 25 Kg

    Product Brochure

    BrandAquatek Conchem
    Usage/ApplicationGrouting Of Concrte Bridges,Tunnels,Dams
    Packaging Size25 - 50 Kg
    TypeFine Powder
    Packaging TypeHDPE Bag
    ColorGrey

    Fine Cement Grout is a specially formulated cementitious shrinkage compensation precision grout, design for pressure grouting / rehabilitation of stone masonry / concrete bridges, tunnels, dams, pre & post tension sections and other major structures, where ordinary cement grouts are not sufficient and epoxy grouts are expensive.

    Principal Use:
    • General purpose, Non- shrink, high strength grouting application.

    Features & Benefits:
    • Pre packed and factory controlled.
    • Excellent initial flow and flow retention.
    • High ultimate strength and low permeability.
    • Gives high grout fluidity with low water / cement ratio.
    • Resistant to repetitive dynamic loads.
    • Fine powder therefore No blockage / breakdown of grouting pumps.

    View Complete Details

    Yes, I am interested!

    Epoxy Foundation Grout
    Interested in this product?
    Get Best Quote

    Epoxy Foundation Grout

    Rs 550 / KgGet Latest Price

    Product Brochure

    BrandAquatek Conchem
    Packaging Size7.5 Kg
    Model Name/NumberAquapoxy-EG III
    Tensile Strength N Mm Square12 N/mm2
    Shelf Life12 Months
    Pot LifeApprox 60 min at 60 Deg C
    Mix Proportion2/1/5
    Specific Gravity2.15 +/- 0.02
    Curing Time2 Hrs at 30 Deg C
    Comp Strength50-80 N/mm2
    Flexural Strength25 n/mm2

    Aquapoxy-EG III is three component epoxy resin grout. This is specially formulated for application of grouts where high strength and chemical resistance is required. This can be used for grouting gap width between 50-75 mm. The 3 part system consists of epoxy resin, hardener and graded aggregates.

    Area Of Application:
    • Foundations of large compressors, pumps, turbines, rail grouting, key ways, inverted base plates, precast bridge sections etc.

    Features & Benefits:
    • Aquapoxy-EG III has pourable consistency
    • Has a very good early and final strengths
    • It has good chemical resistance for a wide range of acids, alkalies, oils. etc.
    • Due to good tensile and flexural strengths, it gives a very good dynamic load resistance.
    • It has good bond strength with concrete and steel
    • Creep is minimum even under continuous loads
    • Aquapoxy-EG III is designed for nonshrink nature
    • Resists non-oxidising mineral acids, alkali, dilute acids, some organic acids and solvents

    View Complete Details

    Yes, I am interested!

    • Non Shrink Instant Plugging Grout Compound
    • Non Shrink Instant Plugging Grout Compound
    • Non Shrink Instant Plugging Grout Compound
    • Non Shrink Instant Plugging Grout Compound
    Non Shrink Instant Plugging Grout Compound
    Interested in this product?
    Get Best Quote
    Usage/ApplicationPlugging Of Running Water /Leakages
    TypeInstant Setting
    ColorGrey
    BrandAquatek Conchem
    Physical StatePowder
    MaterialCement Based
    Model Name/NumberAquacrete Insta Plug

    Aquacrete-Insta-Plus is a fast instant leak plugging compound. It is ideal for instantaneous sealing of leaks and plugging wet cracks in concrete and masonry surface. It is particularly designed to stop the flow of running water.


    Features & Benifits:

    • Ready to use and only needs addition of water.
    • Effective crack sealing In concrete and masonry surfaces.
    • Can stop the leaking/dripping water, until the final repairs are carried out.
    • Eliminates water seepage at junction areas of walls. floors, external structural features like RCC canopy. chajjas etc.
    • Hardens quickly under continuous wet conditions.
    • Expands as it sets for water tight repair.


    Area of Application:

    • Basement
    • Dams
    • Tunnels (ducts)
    • Water retaining structures
    • Pits C. Cellars
    • Concrete pipe

    View Complete Details

    Yes, I am interested!

    NON SHRIK GROUT ADMIXTURE
    Interested in this product?
    Get Best Quote

    NON SHRIK GROUT ADMIXTURE

    Rs 60 / PackGet Latest Price

    Minimum Order Quantity: 500 Pack

    BrandAQUACRETE GROUT-AID
    Usage/ApplicationIndustrial
    Packaging Size500 GMS
    TypePOWDER
    Shelf Life6 Months
    GradeCEMENT BASED
    ColorBrown
    Country of OriginMade in India

    An admixture for cementitious grouts where a reduced water/cement ratio and positive expansion is required. Applications include bed grouting, duct grouting, non-shrink infilling and jointing. shrinkage and settlement in properly designed cementitious grout.

    Additional Information:

    • Production Capacity: 1000
    • Delivery Time: READY STOCK

    View Complete Details

    Yes, I am interested!

    BrandAquatek Conchem
    Usage/ApplicationConstruction
    Packaging Size50 Kg
    Compressive Strength250 - 500 Kg/Cm2
    Model Name/NumberAquagrout-CS-68/CS-55
    Yield2,200+-50kg/m3
    Bulk Density1.4gm/Cc
    Final Set600 Mins
    Initial Set300 Mins
    Restrained Expansion+0.15 to +0.4%

    We are an acclaimed name engaged in offering our precious clients a superior quality range of High Strength Non Shrink Grout which gives high grout fluidity with Iow water / cement ratio. The offered grouts are accurately processed as per the industrial norms using optimum quality ingredients. Provided grouts are the fine powder therefore No blockage / breakdown of grouting pumps. Our quality controllers test these grouts as per the set quality norms to ensure purity.

     

    Features

    • Excellent initial now and flow retention

    • Pre packed and factory controlled

    • Resistant to repetitive dynamic loads

     

    Benefits:
    • Pre packed and factory controlled.
    • Excellent initial now and flow retention.
    • High ultimate strength and low permeability.
    • Gives high grout fluidity with Iow water / cement ratio.
    • Resistant to repetitive dynamic loads.
    • Fine powder therefore No blockage / breakdown of grouting pumps.

     

    Method of Application:

    • Holes are drilled and nozzles are fixed, as per requirement, area to be grouted should be thoroughly saturated with water. Take appropriate amount of water (VV/P=0.19) in the mixture and then add this and mix for at least 5 minutes or till homogeneous smooth injectable mix is obtained at 30°C. The mixed product should be pumped into the structure within 30 minutes.

    View Complete Details

    Yes, I am interested!
    All Rights Reserved (Terms of Use)