HSS and HSSE Taps
Material | M35, HSS-E |
Color | Golden |
Brand | Totem |
Tolerance | 6G |
We only deal in Maharashtra*
SPIRAL FLUTE - These taps are used to produce a thread close to the bottom of a blind hole and therefore have a very short lead. The right hand spiral cut of the flutes acts to force the swarf away from the cutting teeth to the rear of the flutes and out of the hole. They are better on materials which form long continuous stringy swarf, rather than chips. They are also better to tap a thread in a hole where there is a break in the material, e.g. another hole, as the spiral fluting helps the tap to pick up on the other side. Spiral flute taps can have slow or fast helix angles.
Advantages :
- Can be used in both blind holes & also in through holes
- Chips are pushed upwards due to spiral flute Chip clogging avoided
- Full thread depth can be achieved and this design prevents tap breakage
View Complete Details
Totem Tap
Rs 200 / SetGet Latest Price
We only deal in Maharashtra*
We are authorized dealers & distributors for TOTEM TAPS , drills , carbide endmills , ballnose , rotary burr etc .
With enriched industrial practice and acquaintance, we are providing our customers with an extensive series of Totem Tap.
Features:
- Easy to use
- Durable nature
- Affordable price
- Longer life
- Low maintenance
View Complete Details
Material | M2,M35 |
Brand | TOTEM,EMKAY,EMUGE |
We only deal in Maharashtra *
Roll Taps / FORMING TAPS /
MAKE : TOTEM / EMKAY
Forming taps require different tapping drill sizes when compared to drill sizes used for cut taps.
Mostly Used on Aluminium , Soft Brass , Steel .
MAKE : TOTEM , ET
Advantages :
Can run at higher parameters ex. cutting speed
Better durability compaired to cutting tap
Sturdy exactness for dimensions & profile
Better stability for formed thread
Minimum chance of fracture
No Burr , thus no concern of its disposable
View Complete Details
Material Grade | M2 |
Brand | TOTEM |
We only deal in Maharashtra*
We are providing the top range of HSS Hand Tap that meet on consumer’s demand. The offered product is strictly checked by quality checkers against defined standards.
Features:
- Smooth finish
- Water resistant
- High durability
- Longer life
- Durable finish standards
Details:
These are straight flute general purpose taps which can be used for both machine or hand tapping. They are generally the most economical tool for use on production runs, but are best on materials that produce chips, or where the swarf breaks readily. Where deep holes are to be tapped, in materials which produce stringy swarf, other types of taps may be needed, especially for coarse threads. Hand taps can be supplied in sets of three; bottom, second and taper leads, or individually.
BOTTOM TAPS have a chamfer (lead) of 12 threads, the angle of the lead being around 18 degrees per side. They are used to produce threads close to the bottom of blind holes.
SECOND TAPS have a lead of 3-5 threads at 8 degrees per side. They are the most popular and can be used for through holes, or blind holes where the thread does not need to go right to the bottom.
TAPER TAPS have a lead of 7-10 threads at 5 degrees per side. The taper lead distributes the cutting force over a large area, and the taper shape helps the thread to start. They can therefore be used to start a thread prior to use of second or bottom leads, or for through holes.
Additional Information:
- Item Code: AIS-02
- Production Capacity: 10000
View Complete Details
Material | M35 |
Brand | EMKAY,ET,TOTEM |
We only deal in Maharashtra *
Do Accept Order Of Special TAPS for production Purpose with a Certain Minimum Order Quantity .
MAKE - TOTEM
SIZE Available In ODD Size Roll TAP :
M6 X 1 6G Roll Tap
M7 X 1 6G Roll Tap
M8 X 1 6G Roll Tap
M8 X 1 6G Roll Tap Left Hand
M8 X 1.25 6G Roll Tap
M10 X 1.25 6G Roll Tap
M10 X 1 6G Roll Tap
View Complete Details
Material | M2, HSS |
Brand | Totem |
Tolerance Held | 6G |
We only deal in Maharashtra*
MAKE : TOTEM
We are esteemed manufacturer and supplier of 6G Roll Taps in Pune, Maharashtra, India. Forming Otherwise known as ‘Roll’, ‘Fluteless’ or Polygon taps. Used for the chipless production of threads in ductile materials such as copper, aluminium, soft brass, EN8, EN1 A or steel. Threads produced by uteless taps are formed by plastic deformation, they are not cut. These taps do not have ute or cutting edges but have special roll forming lobes circular land. They are operated at high speeds and are better at maintaining gauge qualification. Because they produce no chips they are very suitable for blind hole application as well as through hole application. Forming taps require different tapping drill sizes when compared to drill sizes used for cut taps.
Specifications:
Sample Availability : Yes
Supplier Product Code : SD4
Competitive Advantages of the product
1) Can run at higher parameters ex. cutting speed
2) Better durability compared to cutting taps
3) Sturdy exactness for dimensions & profile
4) Better stability for formed threads
5) Minimum chance of fracture
6) No Burr , thus no concern of its disposable
Main Markets/Key Customers : Aluminium Component Manufacturer, Copper Component manufacturer, Automobiles part manufacturer, precision Component manufacturer
Sizes Available .
M8 X 1
M8 X 1 LEFT HAND
M10 X 1.25
M10 X 1
M12 X 1.25
M 12 X 1.25 LEFT HAND
M7 X 1
View Complete Details
Usage/Application | Tapping |
Material | M35 |
Brand | TOTEM |
Make - Totem
Special size roll taps also available .
ROLL TAP in all tolerance Available .
Material - Aluminium , EN1 A , EN9 etc
View Complete Details
TOTEM | EMKAY |
We only deal in Maharashtra *
We are Authorized Dealers for HSSE TAPS
To meet variegated demands of our customers, we are involved in providing an exclusive range of Roll Tap. Moreover, we offer this at nominal costs.
Features:
- Durable nature
- Top quality
- Robust structure
- Longer life
- Low maintenance
Details:
Forming Otherwise known as Roll Tap, Fluteless Tap or Polygon taps. Used for the chipless production of threads in ductile materials such as copper, aluminium, soft brass or steel. Threads produced by fluteless taps are formed by plastic deformation, they are not cut. These taps do not have flute or cutting edges but have special roll forming lobes with circular land. They are operated at high speeds and are better at maintaining gauge qualification. Because they produce no chips they are very suitable for blind hole application as well as through hole application. Forming taps require different tapping drill sizes when compared to drill sizes used for cut taps.
Advantages :
- Can run at higher parameters ex. cutting speed
- Better durability compared to cutting taps
- Sturdy exactness for dimensions & profile
- Better stability for formed threads
- Minimum chance of fracture
- No Burr , thus no concern of its disposable
Additional Information:
- Item Code: AIS-01
- Delivery Time: 2 days
View Complete Details
Material Grade | HSSE |
Material | M35 |
Usage/Application | TAPPING |
Size | ALL SIZES |
Brand | TOTEM |
We only deal in Maharashtra *
SPIRAL POINT is also known as "gun nose" or bull nose or chip driver or SPPT . These taps are dimensionally the same as a hand tap, second lead, but have the cutting face ground back relative to the axis of the tap, for the lead portion.
This gives the flute a better cutting action, requiring less power, and pushes the cut material forward, allowing free flow of coolant along the flutes to the cutting edge.
The flutes are not ground as deeply as for hand taps, giving the tap greater strength. It can therefore be run at higher speeds. Spiral point taps are ideal for machine tapping of through holes, or blind holes where there is enough clearance beyond the threaded portion to accommodate the swarf.
Advantages :
- Thread Chamfer is of 4.5 threads & cutting load is distributed
- Shallow flute depth, hence stronger tap
- Chip clogging is eliminated as the tap pushes the chip forward and thus enhancing tool life.
Additional Information:
- Item Code: AIS-04
View Complete Details
Material | m35 |
Brand | Totem |
We only deal in Maharashtra *
Being the well-known organizations, we have been capable to provide our customers a wide series of Straight Flute Tap. This product is available in numerous specifications as per the preferences of the esteemed customers.
Features:
- Precisely designed
- High strength
- Sturdiness
- Easy to use
- Accurate dimensions
Details:
Straight flute taps dimensionally same as hand taps & with a lead chamfer of 1.1/2 threads. The flute & rake angle are designed as per application. These Taps are recommended for tapping on grey cast iron, S G iron & steel. The chips produced are short or powder type with the help of special design provided in the tap
Advantages :
- Thread Chamfer is 1.5 thread & threading can be done upto bottom
- Chips are broken into short / powder chips
View Complete Details
- Developed and Managed by IndiaMART InterMESH Limited