ARKChem Systems Private Limited

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard or As per requirement

Spray drying is a method of producing a dry powder from a liquid or slurry by rapidly drying with a hot gas.

This is the preferred method of drying of many thermally-sensitive materials such as foods and pharmaceuticals.

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard or As per requirement

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard or As per requirement

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard or As per requirement

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard or As per requirement

Industrial sand dryers are essential equipment used to dry sand for various applications, such as construction, manufacturing, and industrial processes. They come in different types, including rotary dryers and fluid bed dryers, each designed to handle specific drying needs

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard or As per requirement

An industrial flash dryer is a high-speed drying system designed to remove moisture from powders, granules, and pastes using a stream of hot air. It is widely used in industries such as food processing, pharmaceuticals, chemicals, and minerals due to its efficiency and ability to handle heat-sensitive materials. The drying process involves dispersing wet material into a high-velocity hot air stream, causing rapid moisture evaporation. The dried product is then separated using a cyclone separator or bag filter, ensuring efficient collection while expelling moist air. Industrial flash dryers offer several benefits, including fast drying times, energy efficiency, versatility in handling different materials, and minimal thermal damage since the short residence time prevents overheating or degradation.

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard or As per requirement

Spray drying is a method of producing a dry powder from a liquid or slurry by rapidly drying with a hot gas.

This is the preferred method of drying of many thermally-sensitive materials such as foods and pharmaceuticals.

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard or As per requirement

A spin flash dryer produces powder from feed, which is viscous or gelatinous in nature, paste or filter cake.

Additional Information:

• Production Capacity: Customized
• Delivery Time: Based on the requirement
• Packaging Details: Standard or As per requirement

Rotary Vacuum Paddle Dryer is used to obtain dry powder from wet cake or solutions. It is a system in which steam/hot water is used as a heating medium in the jacket, in the hollow paddle & shaft. Dust collector, condenser, receiver and vacuum pump are also the part of the system.

The agitation is continuous by means of heated rotating paddles and minimum clearance is kept between scrapers and heated walls which provides an efficient heat transfer from the wet feed to dry state. This results in the solvent/moisture evaporation and converts the wet material dry, to the required proportion. The vapors formed are removed by vacuum. Absence of large air flows virtually eliminates dust problems and also the energy consumption remains low.

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard or As per requirement

Rotocone Vacuum Filter Dryer used to dry temperature sensitive materials under vacuum atmosphere in static type of dryer.

This constant movement of the product increases the heat transfer between the heated surface and the product.

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard or As per requirement

Spray drying is a method of producing a dry powder from a liquid or slurry by rapidly drying with a hot gas.

This is the preferred method of drying of many thermally-sensitive materials such as foods and pharmaceuticals.

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard

Spray drying is a method of producing a dry powder from a liquid or slurry by rapidly drying with a hot gas.

This is the preferred method of drying of many thermally-sensitive materials such as foods and pharmaceuticals.

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard

Spray drying is a method of producing a dry powder from a liquid or slurry by rapidly drying with a hot gas.

This is the preferred method of drying of many thermally-sensitive materials such as foods and pharmaceuticals.

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard

A spray dryer can operate in applications ranging from aseptic pharmaceutical processing to ceramic powder production. It can be designed for virtually any capacity required, with feed rates ranging from a few pounds per hour to over 100 tons per hour. Throughout the entire drying process, powder quality remains consistent. The operation is continuous and adaptable to full automatic control.

A wide variety of spray dryer designs are available to meet different product specifications. These dryers can be used for both heat-resistant and heat-sensitive products. As long as the feedstock can be pumped, it can be abrasive, corrosive, flammable, explosive, or toxic. Feedstock may be in the form of a solution, slurry, paste, gel, suspension, or melt.

The product density can be controlled, and nearly spherical particles can be produced. Additionally, since the material does not contact metal surfaces until dried, corrosion problems are significantly reduced.

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard

An industrial flash dryer is a high-speed drying system designed to remove moisture from powders, granules, and pastes using a stream of hot air. It is widely used in industries such as food processing, pharmaceuticals, chemicals, and minerals due to its efficiency and ability to handle heat-sensitive materials. The drying process involves dispersing wet material into a high-velocity hot air stream, causing rapid moisture evaporation. The dried product is then separated using a cyclone separator or bag filter, ensuring efficient collection while expelling moist air. Industrial flash dryers offer several benefits, including fast drying times, energy efficiency, versatility in handling different materials, and minimal thermal damage since the short residence time prevents overheating or degradation. 

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard

Rotary Vacuum Paddle Dryer is used to obtain dry powder from wet cake or solutions. It is a system in which steam/hot water is used as a heating medium in the jacket, in the hollow paddle & shaft. Dust collector, condenser, receiver and vacuum pump are also the part of the system.

The agitation is continuous by means of heated rotating paddles and minimum clearance is kept between scrapers and heated walls which provides an efficient heat transfer from the wet feed to dry state. This results in the solvent/moisture evaporation and converts the wet material dry, to the required proportion. The vapors formed are removed by vacuum. Absence of large air flows virtually eliminates dust problems and also the energy consumption remains low.

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard

Rotary Vacuum Paddle Dryer is used to obtain dry powder from wet cake or solutions. It is a system in which steam/hot water is used as a heating medium in the jacket, in the hollow paddle & shaft. Dust collector, condenser, receiver and vacuum pump are also the part of the system.

The agitation is continuous by means of heated rotating paddles and minimum clearance is kept between scrapers and heated walls which provides an efficient heat transfer from the wet feed to dry state. This results in the solvent/moisture evaporation and converts the wet material dry, to the required proportion. The vapors formed are removed by vacuum. Absence of large air flows virtually eliminates dust problems and also the energy consumption remains low.

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard

A spin flash dryer produces powder from feed, which is viscous or gelatinous in nature, paste or filter cake.

The two-step process involves disintegration of the feed and drying of the disintegrated feed. 

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard

A spin flash dryer produces powder from feed, which is viscous or gelatinous in nature, paste or filter cake.

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: 8-10 Weeks
• Packaging Details: Standard or As Per Requirement

A spin flash dryer produces powder from feed, which is viscous or gelatinous in nature, paste or filter cake.

The two-step process involves disintegration of the feed and drying of the disintegrated feed. 

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard

Agitated Nutsche filter (ANF) is a filtration technique used in applications such as dye, paint, and pharmaceutical production and waste water treatment. Safety requirements and environmental concerns due to solvent evaporation led to the development of this type of filter wherein filtration under vacuum or pressure can be carried out in closed vessels and solids can be discharged straightaway into a dryer.

 A typical unit consists of a dished vessel with a perforated plate. The entire vessel can be kept at the desired temperature by using a limpet jacket, jacketed bottom dish and stirrer (blade and shaft) through which heat transfer media can flow. The vessel can be made completely leak-proof for vacuum or pressure service.

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard

Rotary Vacuum Paddle Dryer is used to obtain dry powder from wet cake or solutions. It is a system in which steam/hot water is used as a heating medium in the jacket, in the hollow paddle & shaft. Dust collector, condenser, receiver and vacuum pump are also the part of the system.

The agitation is continuous by means of heated rotating paddles and minimum clearance is kept between scrapers and heated walls which provides an efficient heat transfer from the wet feed to dry state. This results in the solvent/moisture evaporation and converts the wet material dry, to the required proportion. The vapors formed are removed by vacuum. Absence of large air flows virtually eliminates dust problems and also the energy consumption remains low.

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard

Rotary Vacuum Dryer is used to obtain dry powder from wet cake or solutions. It is a system in which steam/hot water is used as a heating medium in the jacket, in the hollow paddle & shaft. Dust collector, condenser, receiver and vacuum pump are also the part of the system.

The agitation is continuous by means of heated rotating paddles and minimum clearance is kept between scrapers and heated walls which provides an efficient heat transfer from the wet feed to dry state. This results in the solvent/moisture evaporation and converts the wet material dry, to the required proportion. The vapors formed are removed by vacuum. Absence of large air flows virtually eliminates dust problems and also the energy consumption remains low.

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard

Rotary Vacuum Dryer is used to obtain dry powder from wet cake or solutions. It is a system in which steam/hot water is used as a heating medium in the jacket, in the hollow paddle & shaft. Dust collector, condenser, receiver and vacuum pump are also the part of the system.

The agitation is continuous by means of heated rotating paddles and minimum clearance is kept between scrapers and heated walls which provides an efficient heat transfer from the wet feed to dry state. This results in the solvent/moisture evaporation and converts the wet material dry, to the required proportion. The vapors formed are removed by vacuum. Absence of large air flows virtually eliminates dust problems and also the energy consumption remains low.

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard

Industrial sand dryers are essential equipment used to dry sand for various applications, such as construction, manufacturing, and industrial processes. They come in different types, including rotary dryers and fluid bed dryers, each designed to handle specific drying needs.

Additional Information:

• Production Capacity: As Per Requirement
• Delivery Time: 6-8 Weeks
• Packaging Details: Standard / As Per Requirement

Rotary Vacuum Paddle Dryer is used to obtain dry powder from wet cake or solutions. It is a system in which steam/hot water is used as a heating medium in the jacket, in the hollow paddle & shaft. Dust collector, condenser, receiver and vacuum pump are also the part of the system.

The agitation is continuous by means of heated rotating paddles and minimum clearance is kept between scrapers and heated walls which provides an efficient heat transfer from the wet feed to dry state. This results in the solvent/moisture evaporation and converts the wet material dry, to the required proportion. The vapors formed are removed by vacuum. Absence of large air flows virtually eliminates dust problems and also the energy consumption remains low.

Additional Information:

• Production Capacity: 5 kg/hr to 35,000 kg/hr (Feed Rate)
• Delivery Time: Based on the requirement
• Packaging Details: Standard