ARKChem Systems Private Limited

Additional Information:

• Production Capacity: 5 kg/hr to 30,000 kg/hr (Evaporation Rate)
• Delivery Time: 8 Weeks
• Packaging Details: Standard

MEE is widely used for product concentration and has now been used for recovery of water from wastewater which can be reused for industrial operations thus reducing overall fresh water demand of the industry leading zero liquid discharge and sustainable development.

Additional Information:

• Production Capacity: 5 kg/hr to 30,000 kg/hr (Evaporation Rate)
• Delivery Time: 8 to 10 Weeks
• Packaging Details: Standard

Horizontal Thin Film Evaporators can increase the residence time of the product and achieve high evaporation rate and high percent distillate splits.

The product is distributed at the heated evaporator wall by the rotor so that a turbulent circular ring forms at the whole evaporator surface. Loss of film integrity is not possible therefore very high evaporation rates and very high percent distillate splits can be achieved.

It can also be used to carry out continuous reactions and reactive distillation in the thin and turbulent film at vacuum conditions by increasing the product residence time.

Additional Information:

• Production Capacity: 5 kg/hr to 30,000 kg/hr (Evaporation Rate)
• Delivery Time: 8 to 10 Weeks
• Packaging Details: As per requirement

Additional Information:

• Delivery Time: 8 to 10 Weeks
• Packaging Details: Standard

Additional Information:

• Production Capacity: 5 kg/hr to 30,000 kg/hr (Evaporation Rate)
• Delivery Time: 8 Weeks
• Packaging Details: Standard

An evaporation process is concentration of a process solution by vaporization under specified pressure of solvent in the solution by heating up until its boiling point is reached.

Evaporation process is completed upon obtaining adequate energy to separate water molecules in the form of vapor from solid solution or unvaporizable liquid.

Additional Information:

• Production Capacity: 5 kg/hr to 30,000 kg/hr (Evaporation Rate)
• Delivery Time: 8 Weeks
• Packaging Details: As per requirement

Additional Information:

• Production Capacity: 5 kg/hr to 30,000 kg/hr (Evaporation Rate)
• Delivery Time: 6-8 Weeks
• Packaging Details: Standard or As Per Requirement

Additional Information:

• Production Capacity: 5 kg/hr to 30,000 kg/hr (Evaporation Rate)
• Delivery Time: As per requirement
• Packaging Details: Standard or As per requirement

Additional Information:

• Production Capacity: 5 kg/hr to 30,000 kg/hr (Evaporation Rate)
• Delivery Time: 8 to 10 Weeks
• Packaging Details: Standard or As per requirement

Additional Information:

• Production Capacity: 5 kg/hr to 30,000 kg/hr (Evaporation Rate)
• Delivery Time: 8 Weeks
• Packaging Details: Standard or As per requirement

Additional Information:

• Production Capacity: 5 kg/hr to 30,000 kg/hr (Evaporation Rate)
• Delivery Time: 8 to 10 Weeks
• Packaging Details: Standard or As per requirement

Additional Information:

• Production Capacity: 5 kg/hr to 30,000 kg/hr (Evaporation Rate)
• Delivery Time: 8 to 10 Weeks
• Packaging Details: Standard or As per requirement

An evaporation process is concentration of a process solution by vaporization under specified pressure of solvent in the solution by heating up until its boiling point is reached.

Evaporation process is completed upon obtaining adequate energy to separate water molecules in the form of vapor from solid solution or unvaporizable liquid.

Additional Information:

• Production Capacity: 5 kg/hr to 30,000 kg/hr (Evaporation Rate)
• Delivery Time: 8 Weeks
• Packaging Details: Standard or As per requirement

Mechanical Vapor Recompression (MVR) uses the centrifugal compressor to re-compress the secondary vapor (low temperature and low pressure) which is evaporated from the liquid material to rise its temperature and pressure, so as to reuse it as heating source to evaporate the liquid material again.

Additional Information:

• Production Capacity: Customized
• Delivery Time: 8 Weeks
• Packaging Details: Standard / As per requirement

Additional Information:

• Production Capacity: Customized
• Delivery Time: Based on Requirement
• Packaging Details: Standard

The Wiped Film Evaporator is used for concentration, distilling, stripping, dehydration and deodorisation of products which are heat sensitive or viscous. The equipment can handle a very wide range of feed compositions ranging from 1% to over 95% concentration.

The operation is continuous with a single pass; the self cleaning continuous contact wipers produce and renew the thin film. Such an operation improves product yield, avoids residue and colour formation. It has an internal condenser (optional) that minimizes the pressure drop and maintains vacuum.

Additional Information:

• Production Capacity: 5 kg/hr to 30,000 kg/hr (Evaporation Rate)
• Delivery Time: 8 Weeks
• Packaging Details: Standard

Additional Information:

• Production Capacity: 5 kg/hr to 30,000 kg/hr (Evaporation Rate)
• Delivery Time: 8 Weeks
• Packaging Details: Standard

• Suitable for heat sensitive products
• Gentle evaporation with a short residence time in the evaporator
• Can operate under reasonable vacuum
• Multiple effect arrangement provides steam economy

• Concentration of dilute solutions of heat sensitive products containing water or solvents in applications such as plant extracts in water or organic solvents
• As a reboilier to a distillation column
• Recovery of solvents from contaminants
• Purification of biodiesel
• Pre-concentration before ATFE or ATFD

Additional Information:

• Production Capacity: 5 kg/hr to 30,000 kg/hr (Evaporation Rate)
• Delivery Time: As per requirement
• Packaging Details: Standard

• Suitable for heat sensitive products
• Gentle evaporation with a short residence time in the evaporator
• Can operate under reasonable vacuum
• Multiple effect arrangement provides steam economy

• Concentration of dilute solutions of heat sensitive products containing water or solvents in applications such as plant extracts in water or organic solvents
• As a reboilier to a distillation column
• Recovery of solvents from contaminants
• Purification of biodiesel
• Pre-concentration before ATFE or ATFD

Additional Information:

• Production Capacity: 5 kg/hr to 30,000 kg/hr (Evaporation Rate)
• Delivery Time: As per requirement
• Packaging Details: Standard

• Suitable for heat sensitive products
• Gentle evaporation with a short residence time in the evaporator
• Can operate under reasonable vacuum
• Multiple effect arrangement provides steam economy

• Concentration of dilute solutions of heat sensitive products containing water or solvents in applications such as plant extracts in water or organic solvents
• As a reboilier to a distillation column
• Recovery of solvents from contaminants
• Purification of biodiesel
• Pre-concentration before ATFE or ATFD

Additional Information:

• Production Capacity: 5 kg/hr to 30,000 kg/hr (Evaporation Rate)
• Delivery Time: As per requirement
• Packaging Details: Standard

• Suitable for heat sensitive products
• Gentle evaporation with a short residence time in the evaporator
• Can operate under reasonable vacuum
• Multiple effect arrangement provides steam economy

• Concentration of dilute solutions of heat sensitive products containing water or solvents in applications such as plant extracts in water or organic solvents
• As a reboilier to a distillation column
• Recovery of solvents from contaminants
• Purification of biodiesel
• Pre-concentration before ATFE or ATFD

Additional Information:

• Production Capacity: 5 kg/hr to 30,000 kg/hr (Evaporation Rate)
• Delivery Time: 8 - 10 Weeks
• Packaging Details: Standard / As Per Requirement

• Suitable for heat sensitive products
• Gentle evaporation with a short residence time in the evaporator
• Can operate under reasonable vacuum
• Multiple effect arrangement provides steam economy

• Concentration of dilute solutions of heat sensitive products containing water or solvents in applications such as plant extracts in water or organic solvents
• As a reboilier to a distillation column
• Recovery of solvents from contaminants
• Purification of biodiesel
• Pre-concentration before ATFE or ATFD

Additional Information:

• Production Capacity: Customized
• Delivery Time: 8-10 Weeks
• Packaging Details: Standard / As Per Requirement

Additional Information:

• Production Capacity: 5 kg/hr to 30,000 kg/hr (Evaporation Rate)
• Delivery Time: 8 Weeks
• Packaging Details: Standard

• Suitable for heat sensitive products
• Gentle evaporation with a short residence time in the evaporator
• Can operate under reasonable vacuum
• Multiple effect arrangement provides steam economy

• Concentration of dilute solutions of heat sensitive products containing water or solvents in applications such as plant extracts in water or organic solvents
• As a reboilier to a distillation column
• Recovery of solvents from contaminants
• Purification of biodiesel
• Pre-concentration before ATFE or ATFD

Additional Information:

• Production Capacity: 5 kg/hr to 30,000 kg/hr (Evaporation Rate)
• Delivery Time: 8 Weeks
• Packaging Details: Standard

A rising film or vertical long tube evaporator is a type of evaporator that is essentially a vertical shell and tube heat exchanger. 

Additional Information:

• Production Capacity: 5 kg/hr to 30,000 kg/hr (Evaporation Rate)
• Delivery Time: 8 Weeks
• Packaging Details: Standard