X
View Mobile Number70% Response Rate

Our Product Range

+View All

PNEUMATIC CYLINDER

PNEUMATIC CYLINDER

  • Sc 63x150 Pneumatic Cylinder
  • Sc 63x150 Pneumatic Cylinder
  • Sc 63x150 Pneumatic Cylinder
Sc 63x150 Pneumatic Cylinder
Interested in this product?
Get Best Quote

Sc 63x150 Pneumatic Cylinder

Rs 1,590 / PieceGet Latest Price

BrandJELPC
Model Name/NumberSC 63X150
MaterialAluminium
ShapeCylindrical
Usage/ApplicationIndustrial
TypeHydro Pneumatic
ColorSilver

Product Feature:

  1. Standard cylinder manufactured by our enterprise.
  2. The seal of piston adopts heterogeneous two way seal structure. It’s dimension is tight and it has the function of grease reservation.
  3. It is tie rod cylinder. The cylinder barrel and front/ rear cap is jointed by tie rods with high reliability.
  4. Compared with ISO15552 standard cylinder, SC series cylinder with the same bore size is shorter.
  5. The buffer adjustment of cylinder is smooth and steady.
  6. Cylinders and mounting accessories with several specifications are optional.
  7. The seal material with high temperature resistance is adopted to guarantee the normal operation of cylinder at 150

Installation& Usage:

  1. When load changes in the work, the cylinder with abundant output capacity shall be ed.
  2. Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
  3. Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
  4. Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
  5. The medium used by cylinder shall be filtered to 40μm or below.
  6. Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
  7. The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.
  8. The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.
  9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outlet ports.

View Complete Details

Yes, I am interested!

SC 50x300 Cylinder
Interested in this product?
Get Best Quote

SC 50x300 Cylinder

Rs 1,350 / PieceGet Latest Price

BrandAEROTAC
Model Name/NumberSC 50X300
MaterialAluminium
ShapeCylindrical
Usage/ApplicationIndustrial
TypeHydro Pneumatic

kari 50x300 mm SC Series Double Acting Non Magnetic Cylinder is a premium quality product from Akari. Moglix is a well-known ecommerce platform for qualitative range of Pneumatic Cylinders. All Akari 50x300 mm SC Series Double Acting Non Magnetic Cylinder are manufactured by using quality assured material and advanced techniques, which make them up to the standard in this highly challenging field. The materials utilized to manufacture Akari 50x300 mm SC Series Double Acting Non Magnetic Cylinder, are sourced from the most reliable and official vendors, chosen after performing detailed market surveys. Akari products are widely acknowledged in the market for their high quality. We are dedicatedly involved in providing an excellent quality array of Akari Pneumatic Cylinder

View Complete Details

Yes, I am interested!

  • SC 50X75 CYLINDER
  • SC 50X75 CYLINDER
SC 50X75 CYLINDER
Interested in this product?
Get Best Quote

SC 50X75 CYLINDER

Rs 2,850 / PieceGet Latest Price

BrandTECHNO
Model Name/NumberSC 50X75
MaterialIRON
ShapeSquare
Usage/ApplicationIndustrial
TypeDouble acting
ColorSilver
Max Pressure10KG

  • MODEL NUMBER- SC 50X75
  • BORE-50MM 
  • STROKE-75MM
  • NON MAGNETIC
  • DOUBLE ACTING
  • WORKING PRESSURE- 10KG/CM

View Complete Details

Yes, I am interested!

SC 40X160 Cylinder
Interested in this product?
Get Best Quote

SC 40X160 Cylinder

Rs 1,195 / PieceGet Latest Price

BrandTECHNO
Model Name/NumberSC 40X160
MaterialAluminium
ShapeCylindrical
Usage/ApplicationIndustrial
TypeHydro Pneumatic

  1. Standard cylinder manufactured by our enterprise.
  2. The seal of piston adopts heterogeneous two way seal structure. It’s dimension is tight and it has the function of grease reservation.
  3. It is tie rod cylinder. The cylinder barrel and front/ rear cap is jointed by tie rods with high reliability.
  4. Compared with ISO15552 standard cylinder, SC series cylinder with the same bore size is shorter.
  5. The buffer adjustment of cylinder is smooth and steady.
  6. Cylinders and mounting accessories with several specifications are optional.
  7. The seal material with high temperature resistance is adopted to guarantee the normal operation of cylinder at 150

View Complete Details

Yes, I am interested!

Sc 50x400 Pneumatic Cylinder
Interested in this product?
Get Best Quote

Sc 50x400 Pneumatic Cylinder

Rs 1,750 / PieceGet Latest Price

BrandJELPC
Model Name/NumberSC 50X400
ShapeSquare
Usage/ApplicationIndustrial
TypeSingle acting
ColorSilver

  • Port size: PT 1/4
  • Bore: 50mm (2"); Stroke: 400mm (16")
  • Action Type: Double Acting; Rod Type: Single Rod
  • Max. theoretical force: 170Kgf; Max Pressure: 1.0 MPa
  • Piston port size: M16 X 1.5

View Complete Details

Yes, I am interested!

SC 80x100 Pneumatic Cylinder
Interested in this product?
Get Best Quote

SC 80x100 Pneumatic Cylinder

Rs 2,550 / PieceGet Latest Price

BrandTECHNO
Model Name/NumberSC 80x100
ShapeSquare
Usage/ApplicationIndustrial
TypeDouble acting
ColorSilver

  • Port size: PT 3/8
  • Bore: 80mm, Stroke: 100mm
  • Max. theoretical force: 450Kgf; Max Pressure: 1.0 MPa
  • Action Type: Double Acting; Rod Type: Single Rod
  • Piston port size: M20X1.5 Weight:2663g.

View Complete Details

Yes, I am interested!

SC 80X75 Pneumatic Cylinder
Interested in this product?
Get Best Quote

SC 80X75 Pneumatic Cylinder

Rs 4,450 / PieceGet Latest Price

BrandJELPC
Model Name/NumberSC 80X75
MaterialAluminium
ShapeSquare
Usage/ApplicationIndustrial
TypeDouble acting
ColorSilver

  • MODEL NO. SC 80X75
  • BORE- 80MM
  • STROKE- 75MM
  • DOUBLE ACTING
  • NON MAGNETIC

View Complete Details

Yes, I am interested!

SDNC 100X1000S SPAC CYLINDER
Interested in this product?
Get Best Quote

SDNC 100X1000S SPAC CYLINDER

Rs 14,685 / PieceGet Latest Price

BrandSPAC
Model Name/NumberSDNC 100X1000S
MaterialAluminium
ShapeSquare
Usage/ApplicationIndustrial
TypeDouble acting
ColorSilver

Clients can avail from us a comprehensive range of SDNC S Series Pneumatic Cylinder in varied specifications. Manufactured using high-grade quality raw material, procured from trusted vendors of the market, these cylinders are made available to the clients at leading prices in the market. We have some of the highly qualified professionals associated with us, who understand the varied requirements of the clients, and are capable of customizing these cylinders in accordance with their specific requirements.

Following are the details of these cylinders:

  • ISO 6431 profile cylinder
  • Available in magnetic and non magnetic type
  • Fixed cushioning at both ends
  • Bore: 32 - 100 mm
  • Working pressure: 0.1-1.0 Mpa

 

Technical Parameter:

Bore(mm) 32 40 50 63 80 100
Action Double acting type
Application medium Filtered Air
Pressure range 0.1~1.0Mpa
Proof pressure 1.5MPa
Temperature range -5~70°C
Speed range 50~800 mm/s
Cushion type Adjustable Cushion/Air Buffer(Standard)
Cushion stroke(mm) 20 22 32
Port size G1/8* G1/4* G3/8* G1/2*

View Complete Details

Yes, I am interested!

SDVU 63X10-2SS SPAC
Interested in this product?
Get Best Quote

SDVU 63X10-2SS SPAC

Rs 4,997 / PieceGet Latest Price

BrandSPAC
Model Name/NumberSDVU 63X10-2SS
ShapeCylindrical
Usage/ApplicationIndustrial
TypeDouble acting
ColorSilver

MODEL NUMBER : SDVU63X10-2SS-RSFTM10X1.5
MAKE - SPAC
MADE IN INDIA

View Complete Details

Yes, I am interested!

SC 63X75
Interested in this product?
Get Best Quote

SC 63X75

Rs 3,150 / PieceGet Latest Price

BrandJELPC
Model Name/NumberSC 63X75
MaterialMETAL
ShapeSquare
Usage/ApplicationIndustrial
TypeDouble acting
ColorSilver
Dimension/Size63X75

  • MODEL NO. SC 63X75
  • BORE-63MM
  • STROKE-75MM
  • NON MAGNETIC
  • DOUBLE ACTING

View Complete Details

Yes, I am interested!

SC 63X600 PNEUMATIC AIR CYLINDER
Interested in this product?
Get Best Quote
BrandAEROTAC
Model Name/NumberSC 63X600
MaterialAluminium
ShapeCylindrical

  • Port size: PT 3/8
  • Bore: 63mm (2 1/2"); Stroke: 600mm (24")
  • Action Type: Double Acting; Rod Type: Single Rod
  • Max. theoretical force: 280Kgf; Max Pressure: 1.0 MPa
  • Piston port size: M16 X 1.5

View Complete Details

Yes, I am interested!

MAL 32X80 Pneumatic Air Cylinder
Interested in this product?
Get Best Quote
BrandTECHNO
Model Name/NumberMAL 32X80
MaterialAluminium
ShapeRound
TypeDouble acting
ColorSilver

Pneumatic Air Cylinder Compact Double Acting Non Magnetic (MAL 32 Bore)

View Complete Details

Yes, I am interested!

SDA 20X30-B
Interested in this product?
Get Best Quote

SDA 20X30-B

Rs 1,500 / PieceGet Latest Price

BrandAEROTAC
Model Name/NumberSDA20X30-B
MaterialAluminium
ShapeSquare
TypeHydro Pneumatic
ColorSilver

Additional Info
Acting TypeDouble Acting
Airtac sda seriesCompact Air Cylinder
Airtac Product SeriesAirtac SDA Compact Air Cylinder
Bore Size20mm
BrandAirtac
Component TypeCompact Air Cylinder
MagnetWithout Magnet
Rod TypeMale Thread
Stroke Length30mm

View Complete Details

Yes, I am interested!

TN 32X80 TWIN ROD CYLINDER
Interested in this product?
Get Best Quote

TN 32X80 TWIN ROD CYLINDER

Rs 4,500 / PieceGet Latest Price

Max Pressure0.1-0.7MPa
MaterialIRON
Bore Size32MM
BrandTECHNO
Model Name/NumberTN32X80
ColorSILVER

TN32X80 TWIN ROD CYLINDER
BORE SIZE- 32MM
STROKE SIZE- 80MM

View Complete Details

Yes, I am interested!

TN 32X25 TWIN ROD CYLINDER
Interested in this product?
Get Best Quote

TN 32X25 TWIN ROD CYLINDER

Rs 3,485 / PieceGet Latest Price

Max Pressure0.1-0.7MPa
MaterialIRON
Bore Size32MM
BrandTECHNO
Dimension/Size32X25
Model Name/NumberTN32X25S
ColorSILVER

TN32X25S TWIN ROD CYLINDER
BORE -32MM
STROKE -25MM

View Complete Details

Yes, I am interested!

3 Kg Servo Motor
Interested in this product?
Get Best Quote

3 Kg Servo Motor

Rs 650 / PIECEGet Latest Price

Voltage230 V
Weight3 Kg
Motor TypeAC, DC
Frequency50-60 Hz
Input PhaseSingle
360 ModifiableYes

3 Kg Servo Motor

View Complete Details

Yes, I am interested!

  • SC 63X100 Cylinder
  • SC 63X100 Cylinder
SC 63X100 Cylinder
Interested in this product?
Get Best Quote

SC 63X100 Cylinder

Rs 1,450 / PieceGet Latest Price

BrandJelpc
Model Name/NumberSC 63X100
MaterialAluminium
ShapeCylindrical
Usage/ApplicationIndustrial
TypeHydro Pneumatic
ColorSilver

Bore (mm)3240506380100125160200
ActionDouble Action
Applicable mediumFilered Air
Pressure range0.1~0.9 MPa
Proof pressure1.35 MPa
Temperature range-5???~70???
Speed range300~800 mm/s
Cushion styleAdjustable Air Buffer
Cushion stroke24 mm32 mm
Port sizeG1/8G1/4G3/8G1/2G3/4

View Complete Details

Yes, I am interested!

SDA 50X5-B Cylinder
Interested in this product?
Get Best Quote

SDA 50X5-B Cylinder

Rs 1,500 / PieceGet Latest Price

BrandJELPC
Model Name/NumberSDA 50X5-B
MaterialAluminium
ShapeSquare
Usage/ApplicationIndustrial
TypeDouble acting
ColorSilver

Condition:NewWarranty:1 YearApplicable Industries:Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Restaurant, Printing Shops, Construction works , Energy & MiningAfter Warranty Service:No serviceLocal Service Location:NoneShowroom Location:NoneVideo outgoing-inspection:Not AvailableMachinery Test Report:Not AvailableMarketing Type:Ordinary ProductWarranty of core components:1 YearCore Components:PistonStandard or Nonstandard:StandardStructure:compact cylinderPower:PneumaticBody Material:Aluminum AlloyPlace of Origin:Zhejiang, ChinaBrand Name:SNSActing Mode:Double ActingWorking Media:Cleaned AirCertification:ISO6431,ROHSProof Pressure:1.35Mpa(13.5kgf/cm)

View Complete Details

Yes, I am interested!
All Rights Reserved (Terms of Use)