Asian Contec Limited

Asian Contec Limited

Phase- 1, New Delhi, Delhi
Send SMS
Send E-mail

How it Works
Tell us what you need by filling in the form
Receive Verified supplier details
Compare Quotations and seal the deal
X
I agree to the terms and privacy policy

Company Factsheet

Nature of Business
Manufacturer

Legal Status of Firm
Public Limited Company

GST No.
07AAACA0859J1ZQ

Supplier of range finder, laser range finder and laser distance meter.

Know More

Products & Services

Request Callback

Laser Distance Meter

Ball Bearing

Laser based professional distance measurement device useful for indoor & outdoor applications in building construction, interiors, precision engineering works & fabrication.
• Measuring distances, areas & volumes extremely fast and with high precision.
• Measure distances of inaccessible points.
• Ultra compact design : Pocket sized unit, small & light
• Precise and reliable : Measure up to 50 meters with +/- 1.5 mm accuracy
• Highly visible laser dot for quick & precise on the spot measurements
• Area & Cubic Volume : Separate button for Automatic computation of area
& cubic volume
• Continuous Measurement: Continuous laser scanning for transferring
of measurements
• Indirect: Automatically gives readings of difficult to access walls or ceilings
through indirect measurement using Pythagorean theorem
• Built in Alignment notch : for more precise measurement
• Spike Sensor built in for corner to corner measurements
• Measures in meters, Feet/Inches, Feet / Decimal
• Memory Stores 20 Measurements
• Interactive control panel with large LCD backlit Display
• Battery save mode : Automatic Laser Beam shut off after 20 seconds of
inactivity.

...more
Ask For Price
Yes! I am interested
Request Callback

Laser Range Finder

Ball Bearing

The LXPRO1000 is the smallest, most compact yet extremely advanced Laser range finder. Advanced laser technology delivers superb range performance to targets up to 1000 yards/914 meters away. Features adjustable 5x magnification, accuracy to ±1 yard, scan, rain and Zip modes and built-in reflector. Powered by a 3-volt lithium battery the rugged and weather resistant unit features bulls eye & brush mode allowing selective targeting and distance acquisition.
• Compact design
• Scan Mode
• Weather resistant
• 5 x Magnification
• Brush & bullls eye mode .

...more
Ask For Price
Yes! I am interested
Request Callback

Ultrasonic Distance Meter

Ball Bearing

A basic distance measurement device based on Sonic principle for distance measurement upto 15 meters.

• Includes separate button for Area measurements
• Includes separate button for Volume measurements
• 99% accuracy in ideal conditions
• Includes foot/meter conversion
• Inbuilt laser pointer to see target being measured
• Interactive keys with Large LCD display
• Auto off function.

...more
Ask For Price
Yes! I am interested
Request Callback

Evolution Crosslaser

Ball Bearing

• The 4 horizontal laser lines produce a continuous 360° laser line, the 4 vertical laser lines are at right angles to one another. Ideal for almost any alignment job.
• Sensor-Automatic: electronic positioning motors controlled by temperatue-stable sensors make alignment automatically.
• The RX laser receiver detects the laser lines in any ambient light up to a max. of 50 m radius - ideal for all interior and exterior applications.
• Homogeneous 360° laser line: The 4 horizontal laser diodes project a homogenous laser line. This enables the device to be used like a rotary laser.
• Manual mode supports motorised adjustment of tilts.
• Out-Off-Level: is indicated by optical signals when the unit is outside its self-levelling range.
• The pivoted housing can be turned with a vernier adjustment mechanism and horizontal circle to permit exact positioning of laser lines.
• Transport lock: A pendelum lock protects unit during transport.
• Simple, uniform operating techniques.

...more
Ask For Price
Yes! I am interested
Request Callback

Aquamaster Rotational Laser

Ball Bearing

• 2 stage scan mode: Spot mode, vertical reference beam and 90 reference points.
• Automatic Leveling: Magnetically damped pendulum system utilizes gravity to consistently automatic level, eliminate set up time, guarantee accuracy and transfer reference points to multiple locations with high repeatability.
• Automatic Out of Level Sensing: Audio (beeping sound) & Visual (blinking laser) indicators signals if the unit is out of level during or after setup.
• Remote Control with built in laser receiver : The remote control allows for non directional, unobstructed operation of all functions of the rotary laser. The laser receiver allows utilization of the rotary laser in outdoor conditions even in direct sunlight. The all in on laser receiver and remote control unit has LCD displays both on front & rear. Allows one man operation

...more
Ask For Price
Yes! I am interested
Request Callback

Laser Pointer

Ball Bearing

5Beam Laser Pointer
Homepage -->5Beam Laser Pointer
Five square (90°) spot laser provides simultaneous level, plumb and square reference points facilitating alignment work to be performed in all directions. All beams originate from the same source guaranteeing superior accuracy & repeatability. Additionally, the housing can be turned to enable horizontal leveling, while the two perpendicular lasers allow marking to be easily transferred from floor to ceiling.
• Automatic Leveling: The automatic leveling mechanism eliminates set up time, guarantees accuracy and repeatable transfer of points to multiple locations.
• Automatic Out of Level Sensing: The visual (blinking laser beam) out of level indication signals if the unit is out of level after initial set up. This eliminates tool status checks and costly errors saving time and money.
• Always on the Job: Unlike other laser products, users can easily recalibrate the tool keeping it on the job. Simply follow the instructions in the manual and with a few twists of a flat head screwdriver the tool is ready to go.
• Multipurpose Attachment Accessory: Attachment accessory with strong magnets, tripod mounts and straps allow for attachment of the tool to a variety of different surfaces including metal studs, wooden beams and tripods
• Field Recalibration: Easy field recalibration guarantees performance to specification and keeps the tool on the jobsite, saving time and money.

...more
Ask For Price
Yes! I am interested
Request Callback

Titanium Rotational Laser

Ball Bearing

Titanium 310 S
Homepage --> Titanium 310 S
Fully automatic Rotary Laser with rapid horizontal & vertical laser level alignment. Professional equipment that is dust & water proof designed to perform in the toughest of working conditions. Titanium provides accuracy up to 1mm allowing the unit to be used in high precision engineering, metal based fabrication & manufacturing industries and building construction for leveling, marking, layout, level transfer & gradients in both indoors & outdoors .
• Automatic Rotary Laser with rapid leveling alignment in the horizontal & vertical plane via electronic positioning motors controlled by temperature stable sensors.
• ADS tilt : automatic shutoff by ADS (Anti-drift system) electronic monitoring of the measurement is continuous and switches the laser off when there is an external disturbance.
• Spotlite Marking : prevents parallax error and eases precise marking of the
reference height.
• High-speed Laser receiver with rapid reaction times with LCD display on front &
rear side. Built in magnets allow the receiver to be fixed to ferromagnetic
surfaces. Laser receiver allows utilization of the rotary laser in outdoors even in direct sunlight.
• Separate remote control for controlling all functions for distance upto 50 m.
Four IR receiving diodes allow the Titanium to be remotely operated from
all sides.
• Manual Slope Mode permits layout of gradient up to 5°.

...more
Ask For Price
Yes! I am interested
Request Callback

Altimeter Ziplevel

Ball Bearing

Altimeter Ziplevel is a new generation device that digitally measures and displays difference in levels with precision in any terrain or between two surfaces or points with +/- 3mm accuracy, based on patented gas-liquid system. The Ziplevel allows levels to be transferred to other points without any requirement of line of sight, accessories and provides a genuine one man operation in any construction, survey, precision engineering and metal based fabrication and manufacturing industries
• Quickly and easily level & read elevations or deviations from plane. No tripods,
rod or line of sight required.
• Provides a genuine one man operation.
• Large operating radius of up to 50 m.
• Measure depths by simply using the hold function that puts the module into a constant measurement mode allowing the module unit to be lowered -reading is frozen when the module unit is stable on the bottom surface
• Extremely stable measuring lead with anti-kink protection, working temperature from -30°C to + 70°C.
• Up to 135 measured values can be saved in the memory.
• Easy to transport: Measuring lead simply winds up and the compact unit can then be moved safely.

...more
Ask For Price
Yes! I am interested
Request Callback

Digital Theodolite

Ball Bearing

Digital theodolite is a modern engineering instrument for measuring both horizontal and vertical angles, It is a key tool in surveying and engineering work. The theodolite consists of a telescope mounted movably within two perpendicular axes, the horizontal axis, and the vertical axis. When the telescope is pointed at a desired object, the angle of each of these axes can be measured with great precision.
• Digital theodolite Based on laser technology
• Two large LCD panels with easy-to-read numbers
• Incremental code system.
• Automatically compensates tilt in two directions and compensates vertical angles. Eliminates time wasted to level the instrument.
• High integrated electronic boards and IC elements
• Rechargeable on-board battery included

...more
Ask For Price
Yes! I am interested
Request Callback

Autolevel

Ball Bearing

The Auto level (traditionally referred to as a dumpy level) is an automatically leveling high performance optical instrument useful during site surveys and building construction to gather , transfer or set horizontal levels and grade applications. The instrument contains a stadia reticle that enables rough distance measurement estimation between instrument & grade rod/staff. Auto level is the preferred instrument on construction sites due to its ease to use, rapid set up time and reduced operator fatigue.The automatic level includes an internal magnetically damped compensator mechanism that automatically removes any remaining variation from level and keeps line of sight continuously level. The unit includes a 360 degree angle reference. This eliminates the need or the skill required, as is in the case of traditional dumpy or tilting levels to set up the instrument in each quadrant, to ensure it is accurate through a full 360° traverse .
• Magnetically damped compensator.
• Patented shockproof function.
• Water & dust proof, for use in any weather.
• Angle reference, 360° graduated horizontal circle.
• Crosshair focussing eyepiece.
• Quick & easy set up: leveling with easy grip knobs & circular bubble vial allow for easy setup.

...more
Ask For Price
Yes! I am interested
Request Callback

Ultrasonic Thickness Gauge

Ball Bearing

the mx-3 is a professional ultrasonic thickness gauge providing extreme flexibility & accuracy to field calibrate to a variety of materials instantly for material thickness measurement.
• two-point calibration option.
• standard measurement mode for 4 readings per second.
• high speed scan mode for 16 readings per second.
• readings are viewable on real time basis while scanning.
• bar graph in lcd display indicates stability of reading.
• backlit display.
• probe zero function.

...more
Ask For Price
Yes! I am interested
Request Callback

Multimodal Ultrasonic Material Thickness Gauge

Ball Bearing

the mmx-6 is a multi-mode ultrasonic material thickness gauge that has the ability to field calibrate to a variety of materials instantly for material thickness measurement with multimode for measuring through painted or coated surfaces and eliminate the thickness of the paint using a dual element style transducer in echo-echo mode. No need to remove or allow for errors due to paints & coatings. The mmx-6 can also effectively find pits and flaws with the press of a single button.
• two-point calibration option.
• provides an audible and visual alarm mode.
• in alarm mode, the user can set a nominal thickness value.
when measurements fall above or below the set nominal value, a red
light and audible beeper is displayed and sounded.
• standard measurement mode for 4 readings per second.
• high speed scan mode for 16 readings per second.
• captures the minimum thickness.
• readings are viewable on real time basis while scanning.
• bar graph in lcd display indicates stability of reading.
• backlit display.
• probe zero function.

...more
Ask For Price
Yes! I am interested
Request Callback

Precision Ultrasonic Material Thickness Gauge

Ball Bearing

the px-7 is a precision ultrasonic material thickness gauge model with a resolution of 0. 001mm. The px series are packaged in an aluminum extruded body, with nickel plated aluminum end caps. The px series gauges are typically used for thin material applications.
• single point calibration option.
• standard measurement mode for 4 readings per second.
• high speed scan mode for 8 readings per second.
• differential mode: enter acceptable thickness value, unit will display +/-
difference from value.
• alarm mode: enter a minimum acceptable thickness value. If measurement falls outside hi/lo limits, red led illuminates & sounds beeper. If measurement is between hi/lo limits, green led will illuminate.
• readings are viewable on real time basis while scanning.
• bar graph in lcd display indicates stability of reading.
• backlit display.

...more
Ask For Price
Yes! I am interested
Request Callback

Ultrasonic Material Thickness Gauge

Ball Bearing

general purpose digital material thickness gauge capable of measurement of thickness of variety of metallic & non metallic material substrates such as metals, plastics, ceramics, composites, epoxies, glass etc.
• two-point calibration function.
• single point mode and scan mode.
• coupling status indicator.
• rs232 port output.
• battery indicator.
• auto sleep.

...more
Ask For Price
Yes! I am interested
Request Callback

Material & Coating Ultrasonic Thickness Gauge

Ball Bearing

• measure material thickness.
• measure coating thickness.
• detects pits & flaws in a single mode (pect).
• b scan display option for viewing material cross section.
• multimode feature for measuring material thickness through/eliminate paint
thickness of material.
• measure thickness of material with or without paint or just measure coating
thickness.
• adjust to material types by menu driven user selection of prefed material options.
• automatic probe recognition & temp compensation.
• auto probe zero.
• no need for manual probe zero.
• high speed scan of 50 readings per second.
• audio/visual hi/lo alarm setup option.

...more
Ask For Price
Yes! I am interested
Request Callback

Ultrasonic Flaw Detector

Ball Bearing

mfd500 portable ultrasonic flaw detector is utilized to detect & characterize internal defects in engineering materials such as metals, plastics & composites. High frequency ultrasonic waves locate voids, cracks & material discontinuities by producing distinct echo patterns.

• master-slave menu, shortcut key and digital swiftly knob.
• digital color tft lcd display, background color and wave color are user configurable. Lcd brightness is adjustable.
• large capacity high performance rechargeable lithium-ion battery
• 0~9999mm (at steel velocity); range selectable in fixed steps or continuously variable.
• spike excitation with low, middle and high choices of the pulse energy.
• pulse repetition rate: manually adjustable from 10 to 1000hz.
• damping: 100 ω, 200 ω, 400 ω, selectable to meet different resolution and sensitivity need.
• probe work mode: single element, dual element and through transmission.
• real-time sampling at 160mhz high speed enough to record the defect information.
• rectification: positive half wave, negative half wave, full wave, and rf
• db step: 0db, 0. 1db, 2db, 6db step value as well as auto-gain mode
• alarm with sound and light.
• total 100 configuration channels store all instrument operating parameters plus dac/avg curve; stored configuration data can be easily previewed and recalled for quick, repeatable instrument setup. Total 1000 datasets storage plus a-scan. All the configuration channels and datasets can be transferred to pc via usb port.
• peak hold: automatically searching the peak wave inside the gate
and hold it on the display.
• equivalent diameter calculation: find out the peak echo and calculate its equivalent diameter.
• continuous record: record the display continuously and save it to the memory inside the instrument.
• defect localization: localize the defect position, including the distance, the depth and its plane projection distance.
• defect sizing: calculate the detect size.
• defect evaluation: evaluate the defect by echo envelope.
• dac: distance amplitude correction.
• avg: distance gain size curve function.
• crack measure: measure and calculate the crack depth.
• b-scan: display the cross-section of the test block.
• real time clock for tracking the time.
• usb 2. 0 high speed communication port.

...more
Ask For Price
Yes! I am interested
Request Callback

Monitor Image Guide Borescope

Ball Bearing

compact migs type tft monitor based borescope with high powered 4 led light source that allows images of remote/inaccessible space being inspected to be photographed & video recorded.
• 5. 5mm external diameter tube.
• 4 high power white lights led.
• oil and scratch resistant tempered glass.
• optimized illumination design.
• manual illuminant brightness control.
• portable.
• long duty hour up to 4 hours.
• extra-wide view angle.
• video output function allows images to be viewed on tv/computer.

...more
Ask For Price
Yes! I am interested
Request Callback

Portable Leeb Hardness Tester

Ball Bearing

• select material under test from menu.
• wide measuring range. It can measure the hardness of all metallic
materials. Direct display of hardness scales hrb, hrc, hra, hv,
hb, hs, hl and three types of strength values immediately.
• test at any angle, even upside down.
• seven impact devices are available for special application.
automatically identify the type of impact devices.
• large capacity memory can store 100 groups (relative to average times
32~1) information including single measured value, mean value, testing
data, impact direction, impact times, material and hardness scale etc.
• battery information shows charge status & remaining battery
capacity during use.
• auto off function.
• built in printer.

...more
Ask For Price
Yes! I am interested
Request Callback

Digital Vernier Caliper

Ball Bearing

for convenient, fast & accurate measurements.
display can be zeroed at any point along the slide for transferring measurements.
slide of the digital caliper can be locked using the thumb-screw to hold reading.
depth bar for measuring depths.
stainless hardened steel material - long lasting & corrosion free.

...more
Ask For Price
Yes! I am interested
Request Callback

Mechnical Concrete Test Hammer

Ball Bearing

the concrete test hammer (schmidt hammer) test is the quickest, simplest and least expensive method for non destructive evaluation of concrete and other masonry materials. It is most ideally suited to the measurement of material uniformity over large areas of structure. It provides a measure of relative material surface hardness and is used extensively for the testing of concrete and rock. The hammer consists of a spring loaded plunger which when released, strikes the surface. During the rebound stroke, the mass moves a pointer that indicates the maximum point of return and at the same time indicates a reference value on the scale called the redound number. This number, when converted based on correlations given on the hammer, gives the compression resistance value in respect of the impact angle.

...more
Ask For Price
Yes! I am interested
Request Callback

Digital Concrete Test Hammer

Ball Bearing

the digital concrete test hammer is used to determine the surface hardness of concrete and is one of the most widely used instruments in the field of non destructive testing (ndt) of concrete compressive strength. It is the quickest, simplest, and least expensive method to obtain an estimate of the quality and strength of the concrete.
the st-182 digital concrete test hammer is the most advanced concrete hammer and is equipped with an electronic transducer which converts the rebound values into a reading on the digital display. It displays a range of statistics and there is a facility to download to a pc.
• the software and digital display are integrated into the design of the hammer
• light and easy to use
• high resolution and accuracy
• possibility to store, display and download data to pc
• setting of test parameters and factors (age, shapes, correction factors)
• rapid and simple calibration procedure
• selection of testing angle
• selection of unit (n/mm2, mpa, psi, kgf/cm2)
• automatic conversion of rebound index to equivalent compression strength
• selection between correlation curves between rebound index and compressive strength, 2 pre-set and 5 user definable
• statistical evaluation of test results (mean value, standard deviation, concrete strength estimation)
• supplied with abrasive stone to prepare test surface
• storage of up to 5000 results
• rs 232 output to pc
• rechargeable internal battery.

...more
Ask For Price
Yes! I am interested
Request Callback

Digital Moisture Meter

Ball Bearing

a reliable instrument for moisture testing in materials such as concrete, timber, stone, plastic, fiber glass etc. An indispensable tool for construction industry professionals to test before continuing the construction process. The v1-d1 is pinless and does not damage the substrate under test.

• digital guage
• pinless
• used to indicate moisture content in concrete, fiber glass or wood down to a depth of 3 cms
• digital display with moisture/dry comparison scale.

...more
Ask For Price
Yes! I am interested
Request Callback

Electronic Metal Locator

Ball Bearing

mt6 is an advanced portable instrument that finds ferrous & non-ferrous metals upto 152 mm / 6 inches depth for :
• mapping metal grids through any constructon material such as concrete , tile and marble
• estimate reinforcement in existing columns/beams
• locate metal conduits (steel & copper) behind tiles
• locate metal junction boxes in wall and tilesfind rebar, metal conduits & plumbing before :
• drilling into slabs for anchor bolts
• cutting openings in concrete walls
• drilling to add rebar to slab joints
• boring through floors
• the mt6 as very useful for new building projects & maintenance of old buildings

• unit automatically differentiates between magnetic metals (such as rebar) & non magnetic metals (such as copper pipes). Identification of metal type is provided on the screen
• the screen points depth and location to the nearest ½ inch
• the screen provide depth in both centimeters & inches
• price is 1/10th of cover meters
• personnel with minimum training can operate an mt6 unit
• unit features re-calibration button that ensures correct results each & every time
• large lcd display screen
• tough for everyday jobsite use.

...more
Ask For Price
Yes! I am interested
Request Callback

Wall Scanner

Ball Bearing

the worlds first intelligent wall scanner, the i700 simplifies the wall scanner & stud finding process as it locates both the edges and centre of the conduit. It even points left or right to the nearest conduit during wall scanning. I700 locates pvc conduits upto 1-1/2 inches deep, finds nonferrous metal such as copper pipes up to 1-1/2 inches deep, and finds ferrous metal & ms conduits up to 3 inches deep. The i700 is very useful during electrical, carpentry, plumbing projects and during renovation of old buildings. Find conduit, rebar, electrical boxes, exhaust vents, and ducting. Install ceiling fans, grab bars and chandeliers.
• centrevision technology finds the centre of the conduit in one step
• auto recalibration continuously recalibrates and points in the direction of the nearest conduit
• unique floating head for improved accuracy. The head when makes contact with the wall, comes on
• exclusive ac wirewarning feature continuously detects hot ac electric wiring
• lcd screen indicates the edges and the centre of the conduit located
• left & right indication guides the user on the conduit nearest to the scanning area
• backlit lcd allows work in any construction scenario
• selector button for locating pvc/metal , metal or hot electric wiring
• patented spoltite point system combined with audio provide indication over target centre and edges

...more
Ask For Price
Yes! I am interested
Request Callback

Acoustic Water Leak Detector

Ball Bearing

the aquascope 3 acoustic water leak detector has superior clear sound quality using digital technology which eliminates the background static noise. This significant reduction in background static noise makes it easy for new operators to become good leak finders. This aquascope 3 has minimum noise profiling and a memory function that displays the minimum noise levels for each of the last eight soundings, making it easy to determine if you are getting closer or further from the leak.

the combination of the superior sound quality , simple and intuitive operation, minimum noise profiling and user selectable filters to suppress back ground noises make the aquascope 3 the preferred choice for the professional leak finder. The electronic listening stick is used to listen by making direct contact on valves, hydrants, water meters and the pipe when it comes above ground, in a leakage survey to localise the position of a leak. Then the path of the pipe is followed with a ground microphone, to identify the position of the pipe generating leak noise. With very little training, a good operator can usually pinpoint the leak position to within 100mm.

• digital leak noise analysis displays real leak noise level
• automatic memorisation of leak noise levels for comparison
• high performance sensor developed for correlation technology
• infinitely adjustable, narrow band-pass filter to suppress ambient
noise.
• graphical and digital leak information on lcd display with backlight
• robust ground-mike with wind-and-ambient sound proofing
• hand-probe for direct ‘contact sounding’ on pipes and fittings
• tri-pod foot for ‘surface sounding’ on soft ground.

...more
Ask For Price
Yes! I am interested
Request Callback

Maxi-Rig Directional Drill

Ball Bearing

the dd-1100 is a surface launched, fluid assisted, mechanical horizontal directional drilling system with a tri-axle suspension mounted thrust frame. No large utility construction or pipeline project is complete without this premier piece of field proven directional drilling equipment
• caterpillar® 700 hp (522 kw) c-18 tier iii diesel engine
• 1,100,000 lbs. (500 tonnes) of maximum thrust/pullback power
• 100,000 ft-lbs. (136,000 nm) of maximum rotary torque
• rack & pinion 4 pinion drive with adjustable force limiter
• wrench travels full length of thrust frame
• hydraulically operated pipe supports
• 4 in. (102 mm) fluid course permits 1,000 u. S. Gallons (3,785 l)/per minute flow
• accommodates range ii drill pipe
• 10° - 18° variable drilling angle
• floating spindle™ allows simple makeup and breakout
• dedicated pumps for rotary and thrust
• adjustable torque limiter for rotary and makeup force
• run-on-one-technology-system (roots) capable.

...more
Ask For Price
Yes! I am interested
Request Callback

Auger Boring Machine

Ball Bearing

the 84/96-1800 ng is the next generation of auger boring machine that offers a highly productive rack & pinion system for rapidly pulling the boring machine back to it's starting position on the track without dogging or winching. No more handling of greasy frayed cable or wire rope knots. The rack & pinion system is ready to go full time just push the lever and you're there. Clean. Quick. Safe
• caterpillar® c-7 acert tier iii 300 hp (223 kw) diesel engine
• 1,800,000 lbs. (816 tonnes) of maximum thrust
• 10 speed transmission
• maximum output torque: 272,236 ft-lbs. (369,103 nm)
• working range: 24 to 84 inch (610 to 2,134 mm) casing diameter
• increased ability to pull auger, steering rods, and push product
• increased visibility to the master pusher
• low centerline and wide stance provide increased stability
• hydraulically assisted clutch is easier and more comfortable to operate
• no hook rollers as the machine locks safely to the track
• ergonomic operating button allows for feathering of the rotation and slow turn of the shaft for easy auger installation
• emergency shutdown switch at the operator's station as well as an operator presence tethered switch.
• vivid graphics guide safe and proper machine operation
• update gauge system includes the improved engine tachometer, engine warning light, & hydraulic thrust pressure reading
• the quik split© frame design allows the machine to be separated into sections to accommodate lighter and fasters
• lifts into and out of the bore pit, and aids the operator in being able to facilitate better and safer machine positioning.

...more
Ask For Price
Yes! I am interested
Request Callback

Power Quality Analyzer

Ball Bearing

the ps4500 power quality analyzer is the best choice if you are looking for a versatile, easy-to-use power quality analyzer that can record energy use, log voltage and current, plus capture power quality events such as transients, sags, swells and track harmonic distortion. Use it on single phase or three phase circuits and loads. You can also add the amd option for performing on-line electric motor diagnostics using motor current signature analysis (mcsa).
• the industry’s highest safety standard. Cat iv
• the industry’s highest sampling rate for rms. V, a, w, etc calculated
based on 2,083 samples per cycle.
• swell, sag, and inrush detection of every half cycle of all three voltages
and all four currents, simultaneously, while doing all other functions
• complete harmonic analysis simultaneously on every cycle of every input,
while doing all other functions.
• true high-speed transient detection and waveform capture simultaneously on all inputs, while doing all other functions.
• complete power/energy/cost analysis of any ac or dc power system, while measuring harmonic, swell, sag, and true high-speed transient analysis on all inputs.
• compatible with vsd outputs. 22-200 hz, 360-440 hz and dc power
• wireless communications with bluetooth technology.
• “foolproof” connections with surestarttm patent-pending technology.
• provision for removable memory with slot for sd memory.
• advanced options such as on-line motor analysis utilizing csa (amd option) and power-line noise spectrum analysis (fao option).
• complete logging, custom triggering, and waveform capture capability.

...more
Ask For Price
Yes! I am interested
Request Callback

Digital Temperature & Humidity Meter

Ball Bearing

a compact dedicated environment meter that is accurate and feature packed. Typical applications are air conditioning in buildings, refrigeration, warehousing, agriculture etc where it is important to measure or record min/max,relative humidity( rh%) and temperature in deg c or deg f.

• contact probe thermometer measures to -20. 0°c~60°c
• fixed emissivity (0. 95) covers 90% of surface applications
• resolution to 0. 1° or 1°
• °c/f° switchable and auto power off
• dual display
• data hold and max hold.

...more
Ask For Price
Yes! I am interested
Request Callback

Digital Sound Level Meter

Ball Bearing

professional hand held sound meter for testing & inspection of noisy machinery, noise pollution checks, dg sets, air conditioning noise, industries, automotive etc. The product is feature packed and very easy to use. The user can select weighting i. E “a” for human ear and “c” for mechanical noise.

• a and c frequency weighing selection
• fast and slow detector indicator characteristics
• 3½ digit lcd display with bar graph
• max and min hold indicator
• conform to : iec 651 type 2, ansi 1. 4 type 2
for noise measurements
• ac signal output facility.

...more
Ask For Price
Yes! I am interested
Request Callback

Earth Resistance Tester

Ball Bearing

a professional earth resistance tester for testing earth resistance in buildings, check lighting protection, remote tower, earthing test for cables, power transformers & equipment. A 2ma measuring current permits earth resistance to be tested without tripping earth leakage current breakers in the circuit. Perform precision measurement of earth resistance with auxiliary earth spikes using straight line method. Alternatively use simplified earth resistance measurement method where it is not possible to drive auxiliary earth spikes or where an earth resistance higher than 10ω is measured.
• measuring range for earth resistance of 0-20 ohms and higher
• 2ma measuring current
• in addition to the facility for percision measurement, test leads for simplified two
wire measuring system also supplied as standard accessories
• data hold function
• conforms to iec 1010 cat iii 300v (en 61010).

...more
Ask For Price
Yes! I am interested
Request Callback
Ask For Price
Yes! I am interested
Request Callback

Digital Measuring Wheel

Ball Bearing

Worlds first Digital Measuring wheel.
The Digital Measuring wheel consists of Heavy duty die cast Aluminum wheels as standard. Wheels have high wear resistant rubber tread for improved traction. The wheels have a heavy a duty metal folding handle with curved gripping area. Kickstand is standard.

• Bi Directional Distance Measurement upto 9999.99 meters
• Digital display
• Automatically converts units of measure - both current value and Value Stored in memory: M-cm, FEET, Feet-inch
• Stores upto 8 measurements in memory
• Auto power off


Application
• Positioning of building components
• Building checks & inspection
• Spacing,alignment & inspection of Metal
Fabrication & Structures
• Alignment and spacing of installation points
• Measurement for flooring, airconditioning,
material estimation
• Layouts from fixed reference points.

...more
Ask For Price
Yes! I am interested
Request Callback

Super Cross Laser

Ball Bearing

Basic 2 Beam Crossline laser that provides Vertical & Horizontal lines which operate simultaneously for inspection & Execution of level & plumb applications such as layout & transfer of levels in interior finishing work. Two laser lines- Horizontal & Vertical. Ideal for aligning tiles, wall studding, windows, doors, etc. Simple to use by virtue of its magnetic-dampened pendulum system - the unit aligns itself automatically in seconds.
• High Visibility Beams up to 10 m
• Automatic Leveling : Gravity leveled pendulum self leveling mechanism eliminates set up time & guarantees accuracy.
• Automatic Out of Level Sensing : The visual ( blinking laser ) out of level indication signals if the unit is out of level after initial setup. This eliminates tool status checks & costly errors, saving time & money.
• Multi Surface Attachment : Its height-adjustable bracket makes the SCL a truly versatile unit that can be mounted on the tripod, directly on the wall and on magnetic surfaces. Built in magnet allows for attachment to metal surfaces.
• Integrated transport restraint protects the pendulum system against damage.
• Concrete: Set forms and footings
• Electrical: Level electrical outlets; Transfer lighting layout from floor to ceiling
• Plumbing: Layout piping, sewer lines, drainage and feed lines; Transfer sprinkler system layout from floor to ceiling
• Carpentry: Level and set; Window layout ; Stair layout; Level and plumb decks; Plumb framing and partition walls; Plumb window and door frames.

...more
Ask For Price
Yes! I am interested
Request Callback

Multimodal Ultrasonic Scope & Gauge

Ball Bearing

the mvx is the top end professional ultrasonic material thickness gauge unit in the mx range. The unit provides four selectable display options (rf, rectified, b-scan, and large digits). An internal data logger that stores a total of 12,000 readings and waveforems, 64 user custom definable setups, selectable transducer table for improved linearity, thru paint mode with the single press of a button, multiple calibration and material selection options, and auto waveform find - just to mention a few! Equipped with a single element flaw prove-up mode for basic angle beam inspections. The unit is packaged in all metal cases, sealed with gaskets to protect them from harsh working environments. The mvxview java based pc software makesthe mvx the most comprehensive ultrasonic thickness gauge on the market.

...more
Ask For Price
Yes! I am interested
Request Callback

Mini-Max Ultrasonic Bolt Tension Monitor

Ball Bearing

the mini-max, ultrasonic bolt tension monitor, defines the state of the art in the measurement of the actual elongation produced by tightening a threaded fastener. The mini-max can measure the elongation very accurately in fasteners of virtually any material from 1/2 inch to 4 feet in length. The measurement is achieved by determining the change in the transit time, of an ultrasonic shock wave along the length of the fastener as the fastener is tightened by any method. The on-board microcomputer automatically interprets this time measurement to display the time(nanoseconds), elongation, load, stress, or %strain from stretching a fastener. Through the use of high speed digital signal processing and automated diagnostics, the mini-max minimizes the requirement for extensive operator training. With built in data recordation and reporting through an rs232 interface, the mni-max offers an easy to use and reliable solution to the most difficult bolting problem.
• the first cost effective ultrasonic solution available on the market.
• effectively monitor your bolts during periodic shutdowns over the service life of the fastener.
• visually compare the unloaded to the loaded waveform.
• measurement quanities - time (nanoseconds), elongation, load, stress, and %strain.
• display options - rf, rectified, large digits with limits bar.
• display resolution - 1/8" vga 240 x 160 pixels.
• stores 8000 readings and waveforms in multiple groups.
• built-in linear regression or vector for optimizing load measurements.
• the auto set feature automatically optimizes detection and adjusts display.
• hi/lo alarm tolerance limits work in conjunction with the data port and external pump shut-off device.

...more
Ask For Price
Yes! I am interested
Request Callback

Dfx Flaw Detector

Ball Bearing

the dfx series ultrasonic flaw detectors are full featured digital scopes designed to handle the simplest to the most difficult applications. Whether the application requires high penetration for materials that are difficult to measure such as shipbuilding, or high resolution for precision aerospace parts, the dfx series flaw detectors are equipped with the necessary features to do the job. 4 models are available - dfx 615/625/635/638
• transflective color tft display
• broad & narrow band amplifier
• square wave pulser (active edge)
• extruded aluminium case (ip65)
• digital thickness display
• dac/tcg/aws/dgs
• automatic calibration
• pc/video/analog outputs
• long battery life (li-ion pack)
• large memory capacity
• curved surface correction
• alphanumeric notes
• trig function
• help feature

...more
Ask For Price
Yes! I am interested
Request Callback

Ez Scope Borescope

Ball Bearing

designed specifically for the engineering, ndt, and automotive industries the new ez scope is an economical yet high performance borescope unit. Unit is compact in size and provides extremely bright illumination. This affordable magnification tool will make inspection easier with greater visibility in hard to reach areas. Ez scope is based on a tough yet flexible cable that can change its shape and can also be bent to align according to the shape of the confined space being inspected.

however, if you require photo/video capture, please refer the st10 migs type borescope.

• 1 meter long probe tube length.
• resolution 320x240 pixels.
• camera tube dia. 10 mm.
• 6 led lights with illuminant intensity.
• water‐oil proof: ip 57.
• 2. 5” full tft color monitor.
• light source output: max. 850 lux ( at 10 cm ).
• fix focus sensor.
• 3 hours of operation ( 4‐aa batteries included).
• net weight: 200g.
• ce/fcc/rohs compliant.
• patented.

...more
Ask For Price
Yes! I am interested
Request Callback

Non-Reflectorless Total Station

Ball Bearing

total station that is ideally suited for field survey data collectors and building construction. The 825 is part of the 822 series retaining many of the classic versatile built in programs.
• control panel - backlit 6 lines lcd display & alphanumeric keyboard with single touch button functions for easy input, access to information and control of main parameters such as edm mode .
• rechargeable batteries - the 825 total station is provided with 2 x rechargeable n1-h batteries to ensure that the unit can be used continuously at work site without having to stop & recharge.
• large internal memory- storage capacity of up to 16000 data points; data can be sorted into different jobsite files.
• water & dust proof - all significant part are protected by tight rubber rings. With waterproof grade ip54, you are free to operate your job no matter in rain or desert.

...more
Ask For Price
Yes! I am interested
Request Callback

Windows Reflectorless Total Station

Ball Bearing

• absolute encoding - the 882r is equipped with absolute encoders, which provide high accuracy and reliability. No need to reset the system for 0 indexing eliminating manual initialization.
• dual axis compensation - vertical and horizontal angles are compensated by dual axis compensator that detects tilt in both directions, ensuring enhanced reliability.
• control panel - backlit 6 lines lcd display & alphanumeric keyboard with single touch button functions for easy input, access to information and control of main parameters such as edm mode including reflectorless or prism.
• rechargeable batteries - the 882r total station is provided with 2 x rechargeable ni-h batteries to ensure that the unit can be used continuously at work site without having to stop & recharge.
• large internal memory - storage capacity of up to 16000 data points. In addition, data can be sorted into different jobsite files in the extended memory with use of the usb memory card.
• water & dust proof - all significant part are protected by tight rubber rings. With waterproof grade ip54, you are free to operate the unit in a desert or rain.
• temperature & pressure sensors - takes surrounding temperature and pressure measurement automatically to implement auto compensation for high accuracy.

...more
Ask For Price
Yes! I am interested
Request Callback

Traceable Maxi Duct Rodder

Ball Bearing

the ctrak is a maxi traceable rodder for tracing route of buried/underground non metallic telecom hdpe ducts or plastic pipes of 36 mm dia or higher. Ideal for maintenance of outside plant buried telecom optical fiber duct networks.

the ctrak is based on a sturdy composite rod of 9mm dia with a built in 1mm copper wire that is rigid yet flexible enough to guide into non metallic hdpe ducts/plastic pipes and metal pipes up to lengths of 300 meters.

the base of the frame contains a terminal box that provides a connection to the inbuilt copper tracer wire of the duct rod. After inserting the traceable rod into the duct which is to be route traced, apply signal from the direct connection lead of a transmitter to the terminal and connect the other lead of the transmitter to an earth stake, which then excites the full length of the rodder to enable trace the buried pipe. Use any digital pipe & cable locating receiver to trace the route of the buried pipe.

the system can be further extended for blockage detection in non metallic pipes.
• compact & easy to transport in a pickup jeep or small transport vehicles.
• enables very rapid route tracing of buried pipes.
• provided with an m12 male threaded rod end on the front tip to allow a
sonde to be attached for locating blockages in buried pipe.

...more
Ask For Price
Yes! I am interested
Request Callback

Magnetic Locator

Ball Bearing

great for engineering agencies & maintenance departments, utilities, water work municipalities, and urban development authorities to
• locate manhole covers buried under asphalt or pavements, catch basins valves, cast iron pipes, septic tank handles, oil tanks, valve boxes & valves, well casings and more
• the fp id 2100 can effectively locate valves and curbs up to 9ft deep, survey markers up to 8ft deep, and pk nails up to 14” deep
• the fp id 2100 provides performance so controlled it can distinguish between a manhole cover and a close iron valve

the fp id 2100 magnetic locator & identifier features a patented (tid)™ target identification system designed to save you time from digging unnecessary holes, especially in hard, paved or frozen ground.

• unbeatable performance & sensitivity – pinpoints buried targets even near an iron fence
• pinpoints to 1 inch of center for valves and curb boxes
• excellent for finding buried ferrous objects including manhole covers, pk nails, iron pipes, valve covers, masonry nails and old hidden culverts
• made of strong abs.
• pulsating tone/low battery indication and quick, easy battery replacement.

...more
Ask For Price
Yes! I am interested
Request Callback

Passive Marker

Ball Bearing

the passive electronic marker requires no ac power, batteries and no connections and is based on resonant principle.
each marker is tuned to a specific frequency such as 169. 8khz, 145. 7khz etc. Once the marker receives a signal at a specific frequency from the hand held digital trans-receiver corresponding to its own frequency, the signal is transmitted back to the receiver for locating. Deploy marker along route of utility at regular intervals and freely on bends to achieve a permanent utility marking and traceability.
• 6 frequencies locate standard utility markers for power, telco, catv,
water, sewer, and gas.
• 3 sensitivity settings for finding deeply buried markers.
• scan feature identifies presence of any markers in an area and quickly
verifies frequency of each marker and therefore locate and mark the
presence of each buried utility with certainty.
• backlit digital display with bargraph for low-light reading.
• while moving through an area, the audible tone peaks to identify
when near or over the utility.
• the unit works on peak – null method thereby allowing the user to
know when he is over the marker/utility or has crossed it.
• compact foldable design - 2. 2 kgs only.
• weather proof membrane buttons.

...more
Ask For Price
Yes! I am interested
Request Callback

Detector Duo

Ball Bearing

the detector duo is a dual frequency gpr for real time onsite detection of buried metallic and non metallic pipes and cables. The unit is based on a dual frequency antennae of 250mhz & 700mhz ; the 250mhz frequency is for scanning and providing high resolution images of deep targets while the 700mhz is for scanning and providing high resolution images of shallow targets. The detector duo therefore provides the ability to locate the exact position of pipes and cables by a single scan (instead of changing antennaes) - saving time & increasing productivity. The unit also provides simultaneous display of both deep and shallow targets with extra soil penetration depth increasing detection performance and reducing possibility of operator error. The software provided by the system is extremely user friendly and allows the operator to view the image in multiple formats for precise identification. Also, the software provides the ability to mark the utility and type of utility in the image for future reference and also measure depth with accuracy.
• compact, flexible and lightweight design to increase
manoeuvrability
• collapsible trolley, easy to transport and assemble.
• data storing and printing functions for easy report production
• simple, user friendly software interface makes it suitable even for
non expert users.
• automatic calibration for quick start up. Automatic recovery of soil
type parameters. No need to insert propagation speed or soil
dielectric constants.
• easy mark-up tool for all types of pipes and cables.
• easily replaceable antenna skid.
• optional bright sunlight readable monitor for best outdoor
performance.

...more
Ask For Price
Yes! I am interested
Request Callback

Pipe Inspection Camera

Ball Bearing

the pipe inspection camera systems featured below are the only method of safe & cost effective analysis inside pipes for checking possible pipe damage, cracks, clogging in pipes such as sewer lines, storm lines, telecom pipes & industrial pipes. The systems offered are the most economical units available, while providing fully waterproof and rugged cameras with multiple, super or turbo led lights to obtain clear visuals. The units are provided with an lcd screen at the base of the unit to allow the user to view and continuously push/pull the rod accordingly during inspection. The units in their basic form are offered for real time inspection and are upgradeable to full video recording, metering and larger pipe inspections based on user option. The pipe inspection camera system is useful to municipal bodies, utilities, civil engineering, industrial maintenance, telecoms and disaster management.

• ultra bright led’s for optimal image quality.
• camera head made of high-grade steel waterproof till max. 4 bar.
• robust trouble-free contacts.

...more
Ask For Price
Yes! I am interested
Request Callback

Cable Jockey-Mini Duct Rodder

Ball Bearing

ideal for pulling electric cables & wires, fiber optic cables & datacom cables in under floor channels, multi-storey office complexes and long length industrial electrical circuits.

• compact construction. Can fit into the boot of any car.
• flexible rod: optimal for cable/wire installation in conduits and
underground ducting up to 80m.
• rod housed in a study metal frame with an integral brake. Simply rotate
the wheel to guide the rod down the duct.
• provided pre attached with bullet pulling eye.
• no running cost.
• provided with service set comprising: 2 rod ends, 1 adhesive 20ml.

...more
Ask For Price
Yes! I am interested
Request Callback
Ask For Price
Yes! I am interested

Range Finder

    Ask For Price

    View All Products »

    Reach Us

    Gmap

    Asian Contec Limited B- 28, Okhla Industrial Area, Phase- 1, Phase- 1,
    New Delhi-110020, Delhi, India

    Harvinder Singh
    Send SMS
    Send E-MAIL

    Share Us:


    We are here to Help You!
    Go Mobile : Follow Us On :
    Copyright © 1996-2018 IndiaMART InterMESH Ltd. All rights reserved.