Atlantis Erudition & Travel Services Private Limited

Additional Information:

• Production Capacity: 100
• Delivery Time: 1 week

The Bondtech DDX Direct Drive eXtruder for Creality 3D printers is an upgrade kit that replaces the original bowden with a direct drive setup. It is a high-performance Dual Drive extruder based on the BMG Bondtech Mini Geared.

This model was created to be compatible with the original hotend of each Creality model. Users may also upgrade the hotend to Copperhead™ or Mosquito™.

With this integrated fan shroud and mount the DDX v3 is even easier to install.
Snap the fan to the shroud without using screws.
Adjust the height of the shroud with one front access screw.

The DDX was designed to allow space for the bed probe to be attached to the x-carriage. In models where there is no space to attach a bed probe like the BLtouch, to the X-carriage, a mount can printed and attached to the right hand side of the DDX.

This Direct Drive eXtruder from Bondtech is a high performance, high reliability 1,75mm Dual Drive extruder for Creality 3D printers, based on our very popular BMG. Bondtech’s unique Dual-Drive technology combined with either the factory hotend or for even better performance the industry leading hotends Copperhead™ or Mosquito™ from Slice Engineering, gives you a direct drive extruder with trouble free material feeding and enables the use of a wider range of materials. The housing parts are printed with PA12 (polyamide) for maximum strength and precision using industrial grade SLS technology.

Bondtech DDX Direct Drive eXtruder for Creality is designed to give the user more options – different materials; higher flow and/or wider nozzles; thinner layers – and achieve a higher print quality. The DDX is based on the BMG Bondtech Mini Geared extruder featuring our unique Dual-Drive technology. The DDX housing design provides an effective Hot-End cooling.  With the 3:1 gearing ratio, high resolution prints with small nozzles or high flow prints with bigger nozzles can be achieved.

For ease of setup the kit is attached to the carriage with only 2 screws.

• 1x DDX v3 Extruder
• 1x Nema17 Pancake stepper motor
• 1x Thumbscrew Assembly
• 1x 70cm Stepper motor extension cable
• 1x 60cm PTFE tube
• 1x 7cm Capricorn tube
• 4x Zip-ties
• 3x M3x12mm screw
• 2x M3x20mm screw
• 1x M3 square nut
• 1x M3x10mm button head screw
• 1x 10079-3 PA12 Fan Shroud
• 1x SLS Ender Hotend Adapter

Know more about the different ways to upgrade your Creality with DDX here:
The 4 Phases of Bondtech DDX for Creality

Bondtech DDG Extruder for Ultimaker 2+ and Ultimaker 3. We only currently carry the Ultimaker 3 version, if you require an Ultimaker 2+ variant, please contact us.

This extruder replaces the factory extruder and mounts in the same position making the installation very easy and fast with minimal of effort.

This kit offers a high performance extruder system with our DualDrive technology that provides slipping free material feeding. The adjustable tension allows you to finetune the setting for different filaments.

The housing parts are professionally 3D printed in polyamide for maximum strength and precision.

This extruder fits Ultimaker 3, and Ultimaker 3 Extended.

Installation Guide can be found on thinkrobotics.in.

Like all other Bondtech Extruders, the DDG features Nickel Coated hardened Steel Drive Gears to feed standard and abrasive materials with confidence and without wear.

The original stepper motor of the printer will be reused and the extruder will be mounted at the same position and in the same mounting holes as the factory extruder making the installation easy and fast in about 10 minutes.

This upgrade kit is compatible with 2.85mm filament only.
E-steps needs to be updated to 311.

Firmware with adjusted E-step is available for Ultimaker2+, Ultimaker2+ Extended or you can send a M-code to the printer directly to set the e-steps (more info here) under the section E-steps.

For Ultimaker 3 there is no firmware available, settings need to be adjusted in the current configuration, check the installation guide that you will find under the tab “Installation guide”

This extruder is developed together with C.Matthes in Germany

1. Established as a Pvt.Limited Company firm in the year 2013, we “Atlantis Erudition & Travel Services Private Limited” are a leading Manufacturer, Service Provider and Trader of a wide range of Compact Charger, Drone Camera, Electronic Development Board, etc.

Additional Information:

• Production Capacity: 500
• Delivery Time: 3
• Packaging Details: STANDARD

Additional Information:

• Production Capacity: 500
• Delivery Time: 3
• Packaging Details: STANDARD