Automat Irrigation Private Limited

Introducing our brand new 3 in 1 quick & easy DIY Rain Gun Kit. A Concept to provide a ready-to-use kit with an existing HDPE (75/90 mm) piping system in the field.

Features

1. Quick & easy DIY installation and usage

2. Low-cost maintenance

3. Economical & long-lasting

4. Saves times, resources, money & labour

5. Simply connect with HDPE pipes & use them

Mariner is a full and part circle sprinkler. It can be equipped with nozzles of various diameters and an adjustable jet-breaker which provides a light and uniform rainfall all over the watered area. Its sizes and features have been designed to obtain the highest watering efficiency. 

Features

1. Both Part Circle & Full Circle adjustments.

2. Adjustable Jet breaker to provide uniform distribution.

3. Equipped with interchangeable nozzles of different sizes for various applications.

4. Inner rotating system supported by stainless steel ball bearing to guarantee no strain and no oxidation due to humidity.

Skipper is a full and part circle rain gun. It can be equipped with nozzles of various diameters and an adjustable jet-breaker which provides a light and uniform rainfall all over the watered area. Its sizes and features have been designed to obtain the highest watering efficiency. Note that the Skipper is a gear driven sprinkler and with its smooth rotation does not cause the vibration damage to supporting infrastructure that similar sized impact sprinklers do.

Features

1. Both Part Circle & Full Circle adjustments.

2. Adjustable Jet breaker to provide uniform distribution.

3. Equipped with interchangeable nozzles of different sizes for various applications.

4. Inner rotating system supported by stainless steel ball bearing to guarantee no strain and no oxidation due to humidity.

Body and arm made of heavy duty brass. Primarily used in irrigation by overhead irrigation solid set systems – portable or permanent.

Features

1. Connection size - 1/2" BSP/NPT Male threaded

2. Nozzle size above 3.17mm with stream straightening vane for long range

3. Heavy duty brass body, arm, Nut, tube and nozzles.

4. Pivot pin and Springs made of Stainless steel.

With the new stainless steel tube, maintains proper soil moisture which increases the quality & yield of the crop. Garud is made up of special heavy duty material that gives great performance even in strong winds.

Features

1. Body and arm made of Sand Casted Aluminium for good impact resistance.

2. Painted body and arm of sprinkler for good life and resistant to corrosion.

3. Special PU pad to avoid wear and tear of the impact area of sprinkler.

4. Heavy duty brass nut & nozzles.

5. Stainless Steel Tube for less frictional flow of water to achieve desired throw.

6. Stainless Steel pivot pin, top & bottom springs.

7. Bearing & sealing washers are made of special material for extended life

Body and arm made of bronze for durability and bottom dust cap for avoiding sand deposition on bottom bearing.

Features

1. Durable Bronze body and arm

2. Heavy duty Brass Nut, Tube and nozzles.

3. Bottom Dust cap for avoiding sand deposition on bottom bearing

4. PU thurst pad for impact wear resistance.

5. Stainless Steel Pivot Pin and springs

Aluminium die casted body and arm with jet break screw to change the water jet from heavy droplets to fine spray. 

Features

1. Aluminium Pressure die casted Body and arm..

2. Heavy duty brass nut, tube, nozzles & Diffusor Screw

3. Stainless Steel Pivot Pin, springs, Nut and bolt.

4. Plastic parts made of engineering plastic for durability.

5. Available both Full Circle & Part -circle design.

6. Jet breaker screw to change the water jet from heavy droplets

to fine spray

Aluminum die casted body and arm with jet break screw to change the water jet from heavy droplets to fine spray. 

Features

1. Aluminium Pressure die casted Body and arm..

2. Heavy duty brass nut, tube and nozzles

3. Stainless Steel Pivot Pin, springs and part circle mechanism.

4. Plastic parts made of engineering plastic for durablity.

5. Available both Full Circle & Part -circle design.

6. Jet breaker screw to change the water jet from heavy droplets

to fine spray

This is a large sized rain-gun that offers maximum coverage radius at equivalent pressure levels as against other rain gun offerings in the market Integrated with a specially extruded Aluminium pipe with fins for larger coverage, it is competitively priced with its own 4-legged stand for ease of operation.

Features

1. Available in both Full Circle & Part circle design.

2. Jet breaker screw to change the water jet from heavy droplets to fine spray

Automat’s HT-22U is a power-packed, efficient Mini Sprinkler, ideal for optimum irrigation and humidity creation for crops.

Features

1. Uniform water application maintains optimum soil moisture ratio.

2. Uniform germination & fertilizer application & avoids leaching of soil and fertilizer in grade water.

3. Easy to install & dismantle with visibility of operation.

4. High water distribution uniformity and coverage.

5. Being a versatile system, can be used for 2‐3 crops each year.

6. Low operating pressure, thus energy saving.

7. Durable and weather resistance – long life span

Made of engineering plastic for durability. Used for all crops irrigation compatible by overhead irrigation on solid set as well as portable systems.

Features

1. Body, Arm,Nut, Tube and part circle mechanism made of engineering plastic material for durability and corrosion resistant <.

2. Nozzle Bayonet connection for easy service in field conditions <.

3. Also available in Brass Threaded Nozzle.

4. Nozzles with integrated streams straightening vane for long range

5. Pivot pin and springs, part circle pin made of Stainless steel

Body and arm made of bronze for durability and primarily used in irrigation by overhead irrigation solid set systems – portable or permanent.

Features

1. Pressure die casted brass body & arm for consistent performance and increased life

2. Excellent water distribution uniformity at low pressure

3. Body, arm, bearing and sleeve made of brass

Bronze body, Zamac Pressure Die Casted arm for durability & efficient irrigation of field edges, and comes with an adjustable deflector plate to change the spray height.

Features

1. Durable Bronze body, Zamac Pressure Die Casted Arm,

2. Stainless Steel Pivot Pin, deflector plate, part circle mechanism.

3. Diffusor screw to change the water jet from heavy droplets to fine spray.

4. Adjustable deflector plate to change the spray height for adjusting throw

Body and arm made of bronze for durability and useful for areas where strong wind is prevalent.

Features

1. Durable Bronze Body & Arm

2. Heavy duty Brass Nut &Tube

3. Stainless Steel Pivot Pin and springs

4. Bearing & Sealing washes are made of material for extending life

Body and arm made of bronze for durability. Primarily used in irrigation by overhead irrigation solid set systems – portable or permanent.

Features

1. Durable bronze body and arm.

2. Heavy duty brass Nut & tube

3. Stainless steel Pivot Pin, deflector plate, diffusor screw, part circle mechanism.

4. Bearing & Sealing washers are made of material for extending life.

5. Diffusor screw to change the water jet from heavy droplet to fine spray (AQ20PC- ASDA)

6. Special model available for pressure application up to 6.0kg/cm2

7. For efficient irrigation of field edges

Made of engineering plastic for durability and corrosion resistance. Primarily used in agriculture fields and germination of vegetables, flowers and nursery crops.

Features

1. Colour coded nozzles for easy size identification

2. Nozzle Bayonet connection for easy service in field conditions.

3. Nozzles designed for excellent distribution uniformity.

4. Engineering Plastic material for durability and corrosion resistant

Overhead part circle sprinkler with 1/2" BSPT male threated connection and25o trajectory angle.

Features

1. Colour coded nozzles for easy size identification

2. Nozzle Bayonet connection for easy service in field conditions.

3. Nozzles with integrated stream straightening vane for long range

4. Engineering Plastic material for durability and corrosion resistant

5. Pivot pin and Springs made of Stainless steel.

6. Part circle assembly made by special grade plastic material for longevity

Body and arm made of engineering plastic for durability with plastic wedge drive spool. 

Features

1. Available in Male threaded

2. Colour coded nozzles for easy size identification

3. Nozzle Bayonet connection for easy service in field conditions.

4. Nozzles with integrated stream straightening vane for long range

5. Engineering Plastic material for durability and corrosion resistant

6. Pivot pin and Springs made of Stainless steel

Body and arm made of bronze for durability. Specially designed for large precipitation rate and spacing.

Features

1. Specially designed for large precipitation rate and spacing.

2. Durable Bronze body and arm

3. Heavy duty Brass Nut & Tube

4. Stainless Steel Pivot Pin, Springs

Body and arm made of bronze for durability and bottom dust cap for avoiding sand deposition on bottom bearing.

Features

1. Durable Bronze body and arm

2. Heavy duty Brass Nut, Tube and nozzles.

3. Bottom Dust cap for avoiding sand deposition on bottom bearing

4. PU thurst pad for impact wear resistance.

5. Stainless Steel Pivot Pin and springs

Body and arm made of bronze for durability. Designed for full field irrigation of field crops.

Features

1. For Efficient irrigation of field edges.

2. Durable Bronze body and arm

3. Heavy duty Brass Nut, Tube and nozzles.

4. Stainless Steel Pivot Pin and springs.

5. PU thrust pad for impact wear resistance

Made of engineering plastic with MS heavy weight inserted in the arm to eliminate arm vibration.

Features

1. Specially designed for large precipitation rate and spacing.

2. Durable Engineering plastic Body, Arm, Nut and Tube.

3. Threaded brass nozzles for durability.

4. MS heavy weight inserted in the arm, eliminate arm vibration & good impact.

5. Stainless Steel Pivot Pin and springs

Aluminium pressure die casted body and arm, suitable for over tree irrigation of tea, coffee plantation, fodder crops and horticulture (also for pastures).

Features

1. Light in weight, robust and reliable design.

2. Aluminium Pressure die casted Body and arm.

3. Heavy duty Brass Nut, Tube and nozzles.

4. Stainless stell pivot pin and springs

A trust of 12 years, the largest selling plastic sprinkler of India. The placement of a QR code on the sprinkler is just one of the new and innovative measures introduced by our company to ensure that our customers get the best quality sprinklers.

Features

1. Durable Engineering plastic Body,Arm Nut,Tube and nozzles

2. Colour coded nozzles for easy size identification

3. Bayonet Nozzles connection for easy service in field conditions.

4. Brass Nozzles are also available with this model

5. Nozzles with integrated spreaded screw is available with both nozzles.

6. Press fitted plated weight into arm for proper impact and balancing.

7. Stainless Steel Pivot Pin and Springs

Made up of Heavy duty Plastic body with Brass nozzle for durability and excellent performance.

Features

1. Non Clog stream straightener in range nozzle ensure excellent performance in wind condition.

2. Proven for its durability by millions of farmers.

3. Manufactured from Special grade of high strength special grade plastic.
   Superior quality washers and other parts ensure more efficiency performance.

4. Brass nozzles are available with this model

Body and nozzles are made up of Brass for long-lasting performance and durability.

Features

1. Pressure die casted Brass Body and arm for consistency in performance.

2. Heavy duty Brass Nut, Tube & Nozzles.

3. Stainless Steel Pivot Pin and Springs.

4. Bearing & Sealing washers are made of material for extending life.

5. Available in Heavy & Light weight Models.

6. Heavy duty Brass material for long life.

7. Sturdy Sprinkler design give no variation in performance during 

8. frequently shifting of HDPE line in the field

The Unique design of the range nozzle helps in excellent water distribution uniformity which improves the quality & yield of the crops.

Features

1. Specially designed nozzles for Increased coverage and Excellent distribution uniformity.

2. Operates even at low pressure of 0.7 bar due to special springs & washers 

3. Bayonet nozzle connection for easy connection and service.

4. Corrosion-proof plastic pivot pin prevents wear & tear of the sprinkler.

5. Graphite bottom washer for smooth and consistent rotation.

6. XU Purple is the main nozzle & green slit nozzle is the spray nozzle