Axitech Nanosystems Private Limited

Dev Path, Ahmedabad, Gujarat

| GST  24AAHCA9990R1ZP

is a member of IndiaMART

| Verified Supplier

View Mobile Number 80% Response Rate

E1,V35,ETHERNET,FIBER Protocol Converter

Protocol converter is a high performance, remote, self-learning Ethernet Bridge. Protocol converter compact size and low cost make it ideal for cost-sensitive bridging applications.

We have differnet ranges of E1 to Ethernet converter, E1 to fiber converter, V35 to E1 converter, V35 to Ethernet converter,V35 to fiber converter,

E1 to V35 converter
Interested in this product?
Get Best Quote

This interface converter provides one E1 interface and one V.35 interface to achieve framed/Unframed E1 interface transferring to V.35 interface. The data channel rate is 2.048Mbps. The device has inter-set loop test function to facilitate the project.


Use: Convert E1 line to V.35 , 


n         Based on self -copyright  IC

n         Can detect the reason of optical signal losing is that the device power-off or transmission fiber broken, and indicate on LED

n         Provide 2 impedances: 75 Ohm unbalance and 120 Ohm balance;

n         After strict testing and practical verification system, completely comply with protocol ITU-T V.35, G.703, G.704

n         Have three Loop Back Mode: E1 interface Loop Back (ANA)V.35 interface Loop Back(DIG)Command the remote V.35 interface Loop Back(REM)

n         Have pseudo random code test function, easily line opened, can be used as a 2M BER Tester

n         AC 220V, DC-48V, DC+24V, DC Power and Polarity-Free




Leaseline conenctivity with V35 router

V35 Router back to back connectivity

Any V35 device to connect with E1 interface. 

View Complete Details

Yes, I am interested!

E1 to Ethernet Bridge / Converter
Interested in this product?
Get Best Quote

This interface converter provides one unframed 2048K E1 interface and one Ethernet interface to achieve 10/100Base-T Ethernet data transmission on the E1 channel. It is a high performance, self-learning Ethernet bridge. This device is the extension device of Ethernet, using network (PDH/SDH/Microwave) that provide E1 channel to achieve local and remote Ethernet interconnecting with serial interfaces at a lower cost. The device has inter-set loop test function to facilitate the project launching and daily maintenance.


n          Support unframed mode (2048K) set and can manage the remote device condition , OAM management data did not  take up user’s time slot

n          Have the function of E1 interface loop back check, avoid the converter crashed because of interface loop back;

n          Have indicator when the device is power-off or E1 line is broken or lose signal;

n          Can set the E1 line that not to send the LINK signal to Ethernet interface while E1 line is broken;

n          The Ethernet interface supports jumbo frames (2036 Bytes);

n          Inter-set dynamic Ethernet MAC address (4,096) with local data frame filtering

n          Ethernet interface supports10M/100M, half/full duplex auto- Negotiation and AUTO-MDIX (crossed line and straightly connected line self-adaptable );

n          Have Ethernet monitor self-reset function, the equipment will not dead

n          Can achieve the remote device setting any 5 mode of Ethernet and can closed the AUTO-MDIX function;

n          Provide 2 clock types: E1 master clock and E1 line clock;

n          The local device can forced the remote device rate follow it(when the device is unframed mode, that is invalid)

n          Have three Loop Back Mode: E1 interface Loop Back (ANA)Ethernet interface Loop Back(DIG)Command the remote Ethernet interface Loop Back(REM)

n          Provide 2 impedances: 75 Ohm unbalance and 120 Ohm balance;

View Complete Details

Yes, I am interested!

Leased Line / PRI Modem
Interested in this product?
Get Best Quote
The Axitech AXNTU 5000 series SHDSL NTU, offers two different ways to connect customers to high-speed
TDM services, either with a G.703, or with a multi-protocol serial DTE port. The multi-protocol serial
DTE port can be configured as a V.35, X.21 or V.36 connection. The G.703 interface will carry
2.048Mbps/1.544Mbps*, and the multi-protocol serialDTE port transfers data up to 2304kbps. The
Axitech AXNTU 5000 can be configured and managed via EOC, or menu-driven VT100 compatible
Asynchronous Terminal Interface, either locally or remotely.
Axitech AXNTU 5000 is equipped with an auto rate capability that identifies the maximum line rate supported
by the copper loop. This powerful automatic configuration capability makes installation and
service provisioning simple and painless. Further flexibility is provided in the ability
to manually set the maximum NTU speed at different levels for different
customer-tailored service offerings, even though the line will run faster.


• Standard G.shdsl (ITU G.991.2) supports for
improved reach/speed and greater
• Fast and cost-effective provisioning of
traditional frame relay (FR or T-HDLC) or
TDM leased line services
• User existing copper loop infrastructures
• Can operate back to back connection
• Efficient single wire pair usage
• Up to 2.3Mbps symmetric service bit rate
• Auto rate installation maximizes data rate
based on loop conditions
• Local management interface with LCD
• Remote line loopback
• SHDSL Line performance monitoring
• Raw and per time interval statistics
• Bandwidth guarantee transmission


Network Interface
Line Rate: SHDSL per ITU G.991.2
Coding: Trellis coded pulse amplitude modulation
Support: ANSI (Annex A) and ETSI (Annex B)
Payload rates: 192kbps to 2.304Mbps
N x 64kbps (N=3 to 36)
• Connection: RJ-48 jack (2-wire)

• Remote Loopback
• V.54 Loopback
• Build in 211 - 1 bit tester
• Configuration with keypad and LCD display
• Console port
• Support firmware upgradeable

CRC 4 enable/disable

Dimensions: 19.5 x 4.8 x 16.8 cm
Input: 90~240VAC with 50~60Hz or -48VDC
Power Consumption: 10W Max
Operation: 0 to 55°C
Humidity: Up to 95% (non-condensing)
DSL Timing
• Network
• Internal
• Loop
Optional Cables for Purchase
• V.35 cable: DB-25 (M) to V.35 (F)
• V.36 cable: DB-25 (M) to V.36 (F)
• X.21 cable: DB-25 (M) to X.21 (F)
* Feature will be implemented or optional.
Specifications are subject to change without notice.
DTE Interface (AXNTU 5000 2W/SER)
• Bit Rate: 64 kbps to 2.304Mbps N x 64 kbps (N=1 to 36)
• DB-25 Female for V.35, X.21 and V.36
G.703 Interface (AXNTU 5000 2W/E1)
• RJ-48C for E1/T1*
• BNC for E1
LAN Interface (AXNTU 5000 2W/LAN)
• Auto MDIX for 10/100 BaseT Ethernet
• RJ45
Performance Monitoring
• ES, SES, UAS, Alarms, Errors for E1/T1*, SHDSL
• Threshold Crossing Notification
Loopback Tests
• Local Loopback
• Digital Loopback

View Complete Details

Yes, I am interested!

Get in touch with us

Reach Us

Axitech Nanosystems Private Limited702, Metrix Building, Behind Divya Bhaskar Press SG Highway, Corporate Road, Makarba, Near Divya Bhaskar Press, Dev Path, Ahmedabad-380006, Gujarat, India

Ankit Trivedi (Vice President)

View Mobile Number80% Call Response Rate

Send SMS
Send Email
Send Payment
Leave a Message, we will call you back!
Send your enquiry to this supplier
I agree to the terms and privacy policy

We Accept Online Payments

All Rights Reserved (Terms of Use)