Aykay Electronics

• Programmable Sensor Input (Thermocouple J & K type and RTD Input)
• Selectable Relay and SSR control Output
• Programmable Single Step Ramp function
• In-built Overshoot Control Protection Algorithm
• Alarm Acknowledge and Inhibit function
• Program lock function to prevent tampering of parameters

• Universal Sensor Input ( All Thermocouple and RTD Input)
• Programmable Single Step Ramp and Soak function
• In-built Overshoot Control Protection Algorithm
• Alarm Acknowledge and Inhibit function

Additional Information:

• Item Code: AI-7482
• Port of Dispatch: courier,hand
• Delivery Time: ready

Additional Information:

• Item Code: AL-5941
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: courier,hand

Ø  Universal sensor input

Ø  Transmitter Supply: 5 VDC/ 10 VDC/ 12 VDC/ 24 VDC

Ø  Programmable control action PID control/ ON-OFF

Ø  Selectable Control Output (Relay/ SSR Drive)

Ø  Programmable Input Signal Conditioning (Digital Filter & Zero Offset)

Ø  Programmable Lower and Higher Setpoint Limit

Ø  Program lock function (To prevent unauthorized tampering)

Ø  Overshoot Control Protection

Ø  Single Step Ramp

Ø  Time Delay for Compressor

Ø  Available in 3 different sizes (48x48, 72x72, 96x96)

Ø  Universal supply voltage ranges from 90 to 270 VAC (24VDC Available on Request)

NX-481/NX-781/NX-981/NX-482/NX-782/NX-982/NX-483/NX-473/NX-493 

Additional Information:

• Item Code: NX
• Delivery Time: 2-3 days

Temperature Input: RTD, 0-20mA, 4-20mA, 0-1V

Ø  %rH Input: 0-20mA, 4-20mA, 0-1V, 0-3.3V, 0-5V, 0-10V, RH-20, RH-35

Ø  5V/ 10V/ 12V/ 24V DC Excitation Voltage (Jumper Selectable)

Ø  Low Water Level Input & Door Open Input

Ø  Fixed SSR Drive Output for temperature

Ø  Independent Control Loops for Temperature & %rH

Ø  Compressor Control Output with Time Delay

Ø  Programmable Alarm for Temperature & %rH

Ø  Relay/ SSR Drive output for Heating, Humidification, Compressor Control, Alarm & Water Level

Ø  Optional Serial Communication Port (RS-485, Half Duplex)

Ø  DIN Standard Dimensions (mm): 96(H) X 96(W) X 65(D),48x48mm

Additional Information:

• Item Code: RHTC
• Delivery Time: 2-3 DAYS

• Universal Sensor Input ( All Thermocouple and RTD Input)
• Programmable Single Step Ramp and Soak function
• In-built Overshoot Control Protection Algorithm
• Alarm Acknowledge and Inhibit function
• Size: 72x72 mm

• Universal Sensor Input ( All Thermocouple and RTD Input)
• Programmable Single Step Ramp and Soak function
• In-built Overshoot Control Protection Algorithm
• Alarm Acknowledge and Inhibit function

• Universal Sensor Input ( All Thermocouple and RTD Input)
• Programmable Single Step Ramp and Soak function
• In-built Overshoot Control Protection Algorithm
• Alarm Acknowledge and Inhibit function
• Size: 96x48 mm

• Universal Sensor Input (All Thermocouple & Pt-100 Input)
• Time Delay for Compressor
• Selectable Relay and SSR control Output
• Selectable Heat/ Cool Mode
• Program lock function to prevent tampering of parameters

• Universal Sensor Input ( All Thermocouple and RTD Input)
• Programmable Single Step Ramp and Soak function
• In-built Overshoot Control Protection Algorithm
• Alarm Acknowledge and Inhibit function

• Universal sensor input (All Thermocouple, RTD and Linear Input)
• Provision for Transmitter Supply
• Programmable Single Step Ramp and Soak function
• In-built Overshoot Control Protection Algorithm

• Universal Sensor Input ( All Thermocouple and RTD Input)
• Programmable Single Step Ramp and Soak function
• In-built Overshoot Control Protection Algorithm
• Alarm Acknowledge and Inhibit function

• Universal Sensor Input ( All Thermocouple and RTD Input)
• Programmable Single Step Ramp and Soak function
• In-built Overshoot Control Protection Algorithm
• Alarm Acknowledge and Inhibit function
• Size: 48x96 mm

• Universal sensor input (All Thermocouple, RTD and Linear Input)
• Provision for Transmitter Supply
• Programmable Single Step Ramp and Soak function
• In-built Overshoot Control Protection Algorithm

Additional Information:

• Item Code: AI-5981
• Delivery Time: 2-3 days

• Universal Sensor Input (All Thermocouple & Pt-100 Input)
• Time Delay for Compressor
• Selectable Relay and SSR control Output
• Selectable Heat/ Cool Mode
• Program lock function to prevent tampering of parameters

• The controller must be configured correctly for intended operation. Incorrect configuration could result in damage to the equipment or the process under control or it may lead to personnel injury. 
• The controller is generally part of control panel and in such a case the terminals should not remain accessible to the user after installation. 

• Selectable sensor input (T/C & RTD)
• Programmable control action Time Proportional control/ ON-OFF
• Programmable Input Signal Conditioning (Digital Filter & Zero Offset)
• Programmable Lower and Higher Setpoint Limit
• Program lock function (To prevent unauthorized tampering)
• Alarm Acknowledge function
• Alarm Inhibit function
• Time Delay for Compressor
• Available in 3 different sizes (48x48, 72x72, 96x96)
• Universal supply voltage ranges from 90 to 270 VAC (24VDC Available on Request)

Additional Information:

• Item Code: itherm7781
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: courier,hand
• Delivery Time: ready

we are dealing in itherm controllers

Selectable sensor input (T/C & RTD)

Ø  Programmable control action PID control/ ON-OFF

Ø  Selectable Control Output (Relay/ SSR Drive)

Ø  Programmable Input Signal Conditioning (Digital Filter & Zero Offset)

Ø  Programmable Lower and Higher Setpoint Limit

Ø  Program lock function (To prevent unauthorized tampering)

Ø  Overshoot Control Protection

Ø  Available in 3 different sizes (48x48, 72x72, 96X96)

Ø  Universal supply voltage ranges from 90 to 270VAC (24VDC Available on Request)
NX-461/NX-761/NX-961/NX-462/NX-762/NX-962  

Additional Information:

• Item Code: AI-446-NX-461
• Delivery Time: 2-3 days

Additional Information:

• Item Code: AI-7941
• Port of Dispatch: By Courier,By Hand
• Delivery Time: Ex-stock/2-3 days

• Programmable Sensor Input (Thermocouple J & K type and RTD Input)
• Selectable Relay and SSR control Output
• Programmable Single Step Ramp function
• In-built Overshoot Control Protection Algorithm
• Alarm Acknowledge and Inhibit function
• Program lock function to prevent tampering of parameters

Ø  Programmable Function: (1) Counter Mode (2) Timer Mode

Ø  Set Point Setting through Thumbwheel

Ø  Programmable Up/ Down counting

Ø  Configurable at Power ON (To avoid Tampering)

Ø  Running count/ Running time cannot be recovered in case of power failure

Ø  2 Programmable Output

Ø  Count Input: (1) Proximity S/W (PNP/NPN) (2) Potential Free Contact

Ø  Reset Input: (1) Front Switch (2) Remote Terminal (3) Power On

Ø  Counting Range: 0 to 9999 Counts

Ø  Timing Range: 0.01 Sec to 9999Hrs via DIP Switch in Timer Mode

Ø  Timer Start Mode: (1) Power On Start (2) Front Start (3) Remote Pulse High to Low (4) Remote Pulse + Level (Close)

Ø  Output 1 Function: (1) ON Delay (2) OFF Delay

Ø  Output 1 Mode: (1) Latched Output (2) Auto-Reset (3) Time-Pulse Repeat (TPR)

Ø  Output 2 Function:

For Counter: (1) Auxiliary Contact (2) Batch Mode (3) OFF

For Timer: (1) Auxiliary Contact (2) End of Cycle (3) OFF

Ø  Available in 2 different sizes (72x72, 96x96)

Ø  Universal supply voltage ranges from 90 to 270 VAC (24VDC Available on Request)

Additional Information:

• Item Code: XTM
• Delivery Time: 2-3 DAYS

Additional Information:

• Item Code: KTM-443
• Delivery Time: ready

Programmable Function: Batch / Length / Preset Counter

Ø Count Range from 0 to 999999 Counts

Ø Count Input: (1) Proximity S/W (PNP/NPN) (2) Potential Free Contact

Ø Reset Input: (1) Front Switch (2) Remote Terminal

Ø Programmable Diameter in Length Mode

Ø Count Retention at Power Fail

Ø Two Independent Output

Ø For Output 1, Relay & Buzzer Output will work simultaneously

Ø Output 1 Modes: (1) Latch Output (2) Auto Reset (3) Off Set Count

Ø Output 2 Function: (1) Auxiliary Contact (2) Batch Mode (3) Independent Set point (4) OFF

Ø Speed (Meter/Min) Display in Length Mode

Ø RPM Value will be displayed in Preset Mode

Ø Available in 3 different sizes (48x48, 72x72, 96x96)

Ø Universal supply voltage ranges from 90 to 270 VAC (24VDC Available on Request)

Additional Information:

• Item Code: BL-77
• Delivery Time: 2-3 DAYS

Additional Information:

• Item Code: AI-5942
• Delivery Time: 2-3 days