Nature of Business
Beko Compressed Air Technologies Private Limited - Manufacturer of filtration, high pressure controller & shuttle valve in Hyderabad, Telangana.
The energy costs of a compressed-air system are decisively influenced by the pressure drop occurring during compressed-air filtration. To maintain the required operating pressure, this pressure drop needs to be compensated by correspondingly higher compressor performance.
CLEARPOINT high pressure filters will give you a decisive added value compared with other brands in this filtration sector. Both reliability and efficiency are significantly increased. The designs are carefully tailored, down to the smallest detail, to the specific requirements of high pressure systems.
Where work takes place under high pressure, the demands on the safety and reliability of a system are particularly high, as the compressed air is significantly more contaminated by solid particles, oil and condensate as a result of the enormous compression. DRYPOINT AC HP is the pivot of an efficient and safe high-pressure system. The premium high-pressure dryer reliably and economically removes humidity and contamination from the compressed air.
It is not the investment costs that determine the cost efficiency calculation regarding refrigeration dryers – but the operating costs. Considering an operating period of five years, only between 20 and 30 per cent of the total costs are allotted to the pure investment, while 70 to 80 per cent are allotted to the ongoing operating costs.
Up to 12 analogue and/or digital sensors
Up to 32 limit values and four alarm relays for trouble indications are freely configurable
7" colour display
In combination with the consumption rate analysis, daily, weekly, or monthly evaluations can be calculated with the costs and counter reading.Stationary dew point measurement
With the stationary dew point measuring device, the data of the continuous measurements are indicated on the display and simultaneously automatically stored in the data logger. An alarm relay is triggered when the adjusted limit value is exceeded. The user will therefore directly receive a message if the process parameters are critical.
BEKO TECHNOLOGIES minimum pressure valves prevent risks which are involved particularly during the start-up of a compressed-air plant. They are suitable for maximum volume flows between 78 and 1,620 m3/h and a maximum operating overpressure of 16 bar.
The METPOINT® PRM pressure transducer detects the relative pressure (gauge pressure) in gaseous and liquid media and transforms this measured value into a linear output signal. Pressure transducers transform the physical pressure into a pressure-proportional electrical signal.
Pressure sensors of the SP21 and SP22 series offer precise system monitoring. The measured values provide the basis for the maintenance and optimisation of production plants. In addition, the exact assignment of pressures opens up possibilities for factual, economic decisions. Versatile interfaces allow for smooth integration into existing process control systems.
If the condensate from the intercoolers is not reliably drained in multistage compressors, it will reach the next compressor stage.BEKOMAT LA/LP prevents damage through “drop attacks”, condensate buildup and water hammers.
In most cases, an increase in production and quality stands in direct relation to the quality of the compressed air applied during manufacture. This applies particularly to cooling processes.
The BEKO BLIZZ compressed-air freezing system supplies top-grade, dry compressed air with lowest temperatures constantly down to below -35°C / - 45°C.
Beko Compressed Air Technologies Private Limited
Plot No. 43/1, CIEEP, Gandhi Nagar, Balanagar., Gandhi Nagar,
Hyderabad-500037, Telangana, India