X

Bengal Tiles

Medinipur, West Bengal

| GST  19AANFB8378H1ZS

| Verified Supplier

View Mobile Number73% Response Rate
Hi
terms privacy policy
Verifying...
1

Have a requirement?
Get Best Price

Hi
terms privacy policy
Verifying...
1

Have a requirement?
Get Best Price

Tile Adhesives

Manufacturer of a wide range of products which include 20kg EX-1 Floor Tile Adhesive, 20kg EX-2 Floor Tile Adhesive, 30kg EX-1 Floor Tile Adhesive and 30kg EX-2 Floor Tile Adhesive.

20kg EX-1 Floor Tile Adhesive
Interested in this product?
Get Best Quote

20kg EX-1 Floor Tile Adhesive

Rs 175 / BagGet Latest Price

Minimum Order Quantity: 100 Bag

Product Brochure

Packaging Size20 Kg
Packaging TypeBag
BrandExtrema
StrengthHigh
ColorGrey
Open TimeNot Less Than 20 Min
Shelf Life12 Month when Stored In Cool & Dry Place
AdjustabilityNot Less Than 20 Min
ApplicationAll Types Of Ceramic Tiles (indoor & outdoor area)
Manufactured ByBengal Tiles

High performance tiles adhesive for all Kind Of Floor And Wall Tiles

Extrema is a Blended Polymer modified Cement based high performance tiles adhesive. For fixing all type of tiles on exterior/interior Wall and Floor.

Know Details Of Product  

EX-1 is a blended Polymer modified cement based high performance tile adhesive. It has high bond strength and it's high water retention ability fixes all types of tiles on exterior/interior Wall and Floor very easily.

Instruction For Use :

  • The surface to be tiled should be sound and thoroughly cleaned to make it free from wax, grease, polish etc.
  • Mix clearwater & Extrema in the ratio of 1:3. At site, adjust water according to desired consistency.
  • Always put adhesive into water & mix it with a trowel/slow speed drills
  • Untila Lump Free Homogenouss Paste Is Obtained.
  • Spread the paste to a thickness of approximately 3-6 mm and comb with a notched trowel. Strictly apply the adhesive paste which can be tiled within 20 minutes.
  • Intermittently touch the adhesive paste on subtrate by finger. Ifthe adhesive sticks to finger then continue tiling. And if not, scrap off the adhesive and apply new coat.
  • Start laying the tiles on the surface. Tap the tiles properly with rubber hammer to ensure complete coverage of the backside of tiles and to eliminate the possibility of any air voids. Remove extra a dhesive from the edge of the tile for further laying.
  • Clean the Tile surface with wet cloth.
Restriction On Use

Do Not Disturb Tiles Setting For First 24 Hours.



Additional Information:

  • Delivery Time: 2-3 days

View Complete Details

Yes, I am interested!

20kg EX-2 Floor Tile Adhesive
Interested in this product?
Get Best Quote

20kg EX-2 Floor Tile Adhesive

Rs 200 / BagGet Latest Price

Minimum Order Quantity: 5 Bag

Product Brochure

BrandExtrema
Packaging Size20 Kg
Packaging TypeBag
StrengthHigh
ColorGrey
Open TimeNot Less Than 20 Min
Shelf Life12 Month when Stored In Cool & Dry Place
AdjustabilityNot Less Than 20 Min
ApplicationAll Types Of Ceramic Tiles (indoor & outdoor area)
Manufactured ByBengal Tiles

High performance Premium tiles adhesive for Interior and Exterior Floor and Wall tiles

Extrema is a blended Polymer modified Cement based high performance tile adhesive. For fixing all type of tiles on exterior/interior Wall and Floor and tile on tile application.

Product Description

EX-2 is a high strength tile Adhesive. It is specially designed for fixing all kinds of tiles including vitrified tiles, ceramic tiles and large tiles on exterior or interior Wall &Floor and it is also used for tile on tile application.

Instruction For Use :
  • The surface to be tiled should be sound and thoroughly cleaned to make it free from wax, grease, polish etc.
  • Mix clearwater & Extrema in the ratio of 1:3. At site, adjust water according to desired consistency.
  • Always put adhesive into water & mix it with a trowel/slow speed drills
  • Untila Lump Free Homogenouss Paste Is Obtained.
  • Spread the paste to a thickness of approximately 3-6 mm and comb with a notched trowel. Strictly apply the adhesive paste which can be tiled within 20 minutes.
  • Intermittently touch the adhesive paste on subtrate by finger. If the adhesive sticks to finger then continue tiling. And if not, scrap off the adhesive and apply new coat.
  • Start laying the tiles on the surface. Tap the tiles properly with rubber hammer to ensure complete coverage of the backside of tiles and to eliminate the possibility of any air voids.Remove extraa dhesive from the edge of the tile for further laying.
  • Clean the Tile surface with wet cloth.
Restriction On Use

Do Not Disturb Tiles Setting For First 24 Hours.

View Complete Details

Yes, I am interested!

30kg EX-1 Floor Tile Adhesive
Interested in this product?
Get Best Quote

30kg EX-1 Floor Tile Adhesive

Rs 257 / BagGet Latest Price

Minimum Order Quantity: 5 Bag

BrandExtrema
Packaging Size30kg
Packaging TypeBag
StrengthHigh
ColorGrey
Open TimeNot Less Than 20 Min
Shelf Life12 Month when Stored In Cool & Dry Place
AdjustabilityNot Less Than 20 Min
ApplicationAll Types Of Ceramic Tiles (indoor & outdoor area)
Manufactured ByBengal Tiles

High performance tiles adhesive for all Kind Of Floor And Wall Tiles

Extrema is a Blended Polymer modified Cement based high performance tiles adhesive. For fixing all type of tiles on exterior/interior Wall and Floor.

Know Details Of Product  

EX-1 is a blended Polymer modified cement based high performance tile adhesive. It has high bond strength and it's high water retention ability fixes all types of tiles on exterior/interior Wall and Floor very easily.

Instruction For Use :

  • The surface to be tiled should be sound and thoroughly cleaned to make it free from wax, grease, polish etc.
  • Mix clearwater & Extrema in the ratio of 1:3. At site, adjust water according to desired consistency.
  • Always put adhesive into water & mix it with a trowel/slow speed drills
  • Untila Lump Free Homogenouss Paste Is Obtained.
  • Spread the paste to a thickness of approximately 3-6 mm and comb with a notched trowel. Strictly apply the adhesive paste which can be tiled within 20 minutes.
  • Intermittently touch the adhesive paste on subtrate by finger. Ifthe adhesive sticks to finger then continue tiling. And if not, scrap off the adhesive and apply new coat.
  • Start laying the tiles on the surface. Tap the tiles properly with rubber hammer to ensure complete coverage of the backside of tiles and to eliminate the possibility of any air voids. Remove extra a dhesive from the edge of the tile for further laying.
  • Clean the Tile surface with wet cloth.
Restriction On Use

Do Not Disturb Tiles Setting For First 24 Hours.

View Complete Details

Yes, I am interested!

30kg EX-2 Floor Tile Adhesive
Interested in this product?
Get Best Quote

30kg EX-2 Floor Tile Adhesive

Rs 300 / BagGet Latest Price

Minimum Order Quantity: 100 Bag

BrandExtrema
Packaging Size30kg
Packaging TypeBag
FormPowder
StrengthHigh
ColorGrey
Open TimeNot Less Than 20 Min
Shelf Life12 Month when Stored In Cool & Dry Place
AdjustabilityNot Less Than 20 Min
ApplicationAll Types Of Ceramic Tiles (indoor & outdoor area)
Manufactured ByBengal Tiles

High performance Premium tiles adhesive for Interior and Exterior Floor and Wall tiles

Extrema is a blended Polymer modified Cement based high performance tile adhesive. For fixing all type of tiles on exterior/interior Wall and Floor and tile on tile application.

Product Description

EX-2 is a high strength tile Adhesive. It is specially designed for fixing all kinds of tiles including vitrified tiles, ceramic tiles and large tiles on exterior or interior Wall &Floor and it is also used for tile on tile application.

Instruction For Use :
  • The surface to be tiled should be sound and thoroughly cleaned to make it free from wax, grease, polish etc.
  • Mix clearwater & Extrema in the ratio of 1:3. At site, adjust water according to desired consistency.
  • Always put adhesive into water & mix it with a trowel/slow speed drills
  • Untila Lump Free Homogenouss Paste Is Obtained.
  • Spread the paste to a thickness of approximately 3-6 mm and comb with a notched trowel. Strictly apply the adhesive paste which can be tiled within 20 minutes.
  • Intermittently touch the adhesive paste on subtrate by finger. If the adhesive sticks to finger then continue tiling. And if not, scrap off the adhesive and apply new coat.
  • Start laying the tiles on the surface. Tap the tiles properly with rubber hammer to ensure complete coverage of the backside of tiles and to eliminate the possibility of any air voids.Remove extraa dhesive from the edge of the tile for further laying.
  • Clean the Tile surface with wet cloth.
Restriction On Use

Do Not Disturb Tiles Setting For First 24 Hours.

View Complete Details

Yes, I am interested!
Tell us what you need, and we’ll help you get quotes
Tell us what you
need
Receive seller
details
Seal the deal
Pay with IndiaMART
Tell us what you need, and we’ll help you get quotes
terms privacy policy