Berger Paints India Limited

• Roof slabs
• Sloping roofs & terraces
• Chajjas/Parapets

• Durability: On curing makes a tough film, hence provides durability.
• Flexibility: Flexible with good crack bridging property.
• Cooling Effect: Visible and IR radiation reflecting and hence imparts cooling effect.
• Breathability: Perfectly breathable, allows the inner moisture to evaporate off.
• Clean Ability: Good dirt pick-up resistance and cleanable.
• Microbial Resistance: Good microbial resistance.
• Toxicity: Non-toxic with anti-efflorescent effect.
• Green Pro Certified: Validates our effort in striving towards cleaner, more sustainable future.

Additional Information:

• Packaging Details: 1 ltr, 4 ltr, and 20 ltr

• Waterproofing: It shows remarkable resistance towards ingression of water, thus providing adequate waterproofing specially water retaining surfaces.
• Carbonation: Latex Shield 2k prevents any concrete carbonation.
• Diffusion: The product shows resistance to chloride ion diffusion.
• Adhesive Properties: It shows excellent adhesion to concrete, natural and artificial stone.
• Corrosion Protective: It is non-corrosive to steel and iron.
• Green Pro Certified: Validates our effort in striving towards cleaner, more sustainable future.

• Water Repellency: Cured surface provides excellent hydrophobicity, exhibiting “Lotus Bead” effect.
• Anti-Efflorescent: Cured surface shows remarkably distinct anti-efflorescence effect in comparison to traditional powder putty.
• Aesthetic Finish: Seamless finish with pin holes filling capability & gives butter like smoothness.
• Ease of Application: Mixed paste is light and no extra strength required for applying on wall.
• Green Pro Certified: Validates our effort in striving towards cleaner, more sustainable future.

• Any concrete structure prone to be affected by damp or already affected
• Bathroom, Kitchen, Wash places, Exterior walls of Water Tanks
• Exterior walls, Interior walls
• Basement & retaining walls, etc.
• Surface protection system of structural concrete from rising dampness. 

• Waterproofing: Protection from hydrostatic pressure upto '7 bars' to the +ve side & '4 bars' from –ve side.
• Crystalline & Nano Technology: Automatic transformation into solid Nano Crystals when it comes in contact with moisture/water and block the pores.
• Breathability: Makes perfectly breathable coating which allows water vapour to pass through while blocking liquid water; thus prevents from pressure build-up.
• Green Pro Certified: Validates our effort in striving towards cleaner, more sustainable future.

• The surface to be applied should be clean and sound, free from any kind of contamination, dirt etc.
• Thoroughly wire brush the surface and clean the dust by air compressor or by water jetting.
• Oil and grease must be removed using degreasing solvents.
• Any damaged surface must be repaired by using crack fillers or polymer modified repair mortar like Advanced Latex Plus.
• Take care of leakages in concealed pipes or all other sources of water, prior to application of the product.
• Very weak plaster must be replaced with a new one.
• Finally the substrate must be properly pre-wetted to a saturated surface-dry condition.

• Add Dampstop to water and start mixing.
• Mix constantly with a stirrer using a pneumatic or electric power tool (1kw) at slow speed of 250 — 300 rpm for 3 - 5 minutes to get a homogeneous, putty like consistency.

• Make sure that the application is on properly prepared bare plaster/concrete.

• 5 Kg: Rs. 1320 per Pack
• 10 Kg: Rs. 2587 per Pack

• High Build Coating: It gives a DFT upto 130 microns as barrier coat which helps to resist water ingression.
• Anti-Carbonation: Reduces carbon dioxide and chloride ion diffusion which gives protection from corrosion of rebars.
• Flexibility: Elongates up to 160% which takes care of minor crack formation on plastered walls.
• Horizontal Application: It can also be applied on Horizontal surface as waterproofing coat with proper ratio (available in PDS).
• 8 years Waterproofing Warranty: Acts as excellent barrier coat which offers 8 years of waterproofing warranty. T&C applicable.
• Green Pro Certified: Validates our effort in striving towards a cleaner, more sustainable future.

• Adhesive Properties: Excellent adhesion on porous and non-porous substrates.
• UV Resistant And Resistant To Yellowing And Weathering
• Highly Elastic And Crack Bridging (Up To 350% Elongation)
• Seamless Waterproofing Membrane
• One Component Ready To Use
• Non-Toxic And VOC-Compliant Water-Based Coating
• Green Pro Certified: Validates our effort in striving towards cleaner, more sustainable future.

Advanced Latex Plus is Styrene-Butadiene Latex based liquid for high performance waterproofing & multi– purpose repair work.

Benefits:

• Bondability: The product displays good bonding with old to new concrete, bricks, stones, etc.
• Waterproofing: The highlight of this product is that it prevents any seepage or dampness.
• Strength of Concrete: It increases the mechanical strength of mortar and hence prevents any cracks.
• Green Pro Certified: Validates our effort in striving towards cleaner, more sustainable future.

• Cohesiveness: It makes the concrete more unified hence preventing any bleeding or segregation.
• Permeability: It enhances the impermeability of water into any reinforced structure.
• Corrosion Reticent: It makes the reinforcement corrosion in the concrete structure non-reactive and passivate.
• Shrinkage: It eliminates the development of cracks in the plaster or concrete by reducing any shrinkage.
• Workability: It improves the workability of cement mortar without increasing the water content.
• Green Pro Certified: Validates our effort in striving towards cleaner, more sustainable future.