X

Bhajjanka Ispat Private Limited

Kolkata, West Bengal

| GST  19AADCB3453A1Z4

| TrustSEAL Verified

View Mobile Number 65% Response Rate

Home

> Our Products

> Industrial Hydrocyclone

Industrial Hydrocyclone

We are a leading Manufacturer of Hydro Cyclones Apex, Hydrocyclone Sand Separator, MS Hydrocyclones, Hydrocyclone Separator, Metal Hydrocyclone and Industrial Hydrocyclones from Kolkata, India.

Hydro Cyclones Apex
  • Hydro Cyclones Apex
  • Hydro Cyclones Apex
Interested in this product?
Get Best Quote

Hydro Cyclones Apex

Rs 10,000 / PieceGet Latest Price

Capacity8-10m3 to 160-180m3
MaterialPolyurethane tetrahedron
Diameter75-300 mm
Separation size15-47 to 47-76 um
Volume500 GPM
Size3 -12 inch

We are leading manufacturer of Hydro Cyclones Apex and our product is made up of good quality.

View Complete Details

Yes, I am interested!

Hydrocyclone Sand Separator
Interested in this product?
Get Best Quote

Hydrocyclone Sand Separator

Rs 6,000 / PieceGet Latest Price

Capacity0.05-0.1 to 500-900 m3/h
Diameter10 - 870 mm
Inlet Pressure0.1-0.6 to 0.04-0.15 MPA
Cut Size1-5 to 74-350 pm
Particle size20-60 60-120 um

In order to meet the varied requirements of our clientele, we are presenting an extensive range of Hydrocyclone Sand Separator. These products are developed using the high grade raw material and advanced technique.This product is widely utilized in the market owing to optimum quality and sturdy nature.

Features:
  • Sturdy nature
  • Fine finish
  • Precise sizes

Applications include:

  • In pulp and paper mills to remove sand, staples, plastic particles and other contaminants.
  • In the drilling industry to separate sand from the expensive clay that is used for lubrication during the drilling.
  • In industry to separate oil from water or vice versa.
  • In metal working to separate metal particles from cooling liquid.
  • In potato processing plants to recover starch from waste water.
  • In mineral processing, hydrocyclones are used extensively both to classify particles for recirculation in grinding circuits and to differentiate between the economic mineral and gangue.
  • To remove sand and silt particles from irrigation water for drip irrigation purposes.Cyclonic separation is a method of removing particulates from an air, gas or liquid stream, without the use of filters, through vortex separation.

Rotational effects and gravity are used to separate mixtures of solids and fluids.The method can also be used to separate fine droplets of liquid from a gaseous stream.



Additional Information:

  • Item Code: HST-09

View Complete Details

Yes, I am interested!

MS Hydrocyclones
Interested in this product?
Get Best Quote

MS Hydrocyclones

Get Latest Price

Overflow Diameter20 - 240 mm
Max Feeding Size1 - 16 mm
Inlet Diameter23 - 187 mm
Internal Diameter100 - 600 mm
Feeding size0-16 mm
Voltage380 V

We are leading manufacturer of MS Hydrocyclones and our product is made up of good quality.

Other details:-
  • Lightweight overflow elbow
  • Vortex finders
  • Loose liners
  • Weep holes prevent damage to housings
  • Spigot
  • High-efficiency inlet designs 

View Complete Details

Yes, I am interested!

Hydrocyclone Separator
Interested in this product?
Get Best Quote

Hydrocyclone Separator

Rs 6,000 / UnitGet Latest Price

Weight1.5-231kg
Voltage380V
Overall dimension260*320*646mm -3690*3584*3475mm
Power24 Kw

Our entity is amongst the reputed names in the market for presenting a wide array of Hydrocyclone Separator.Professional employ only the best quality raw material, obtained from dependable sellers of the industry. Apart from, professionals make this product under the direction of experts as per industry guidelines and quality standards.

Features:
  • High quality
  • Durable nature
  • Low prices


Additional Information:

  • Item Code: HST-10

View Complete Details

Yes, I am interested!

Metal Hydrocyclone
Interested in this product?
Get Best Quote

Metal Hydrocyclone

Get Latest Price

Voltage380V/50HZ OR 460V/60HZ
Inlet Size75-150 mm
Screen Area1.0m2 ~2.4 m2
Treating CapacityLess than 360 m3/h(1584GPM)
Outlet Size125-200 mm
Separation Size200-300 mu m

Being the leading names in the industry, we are betrothed in presenting an exclusive array of Metal Hydrocyclone to our patrons.These products are developed using the sophisticated technique and best quality raw material which is procured from dependable dealers of the industry.
Features:
  • Cater to the mineral industry
  • Have a high wear life
  • Highly reliable
  • Can be availed at compatible costs
  • Applicable for various circulations


Additional Information:

  • Item Code: MST-02

View Complete Details

Yes, I am interested!

Industrial Hydrocyclones
Interested in this product?
Get Best Quote

Industrial Hydrocyclones

Get Latest Price

Cone angle8 - 25 Degree
Feeding pressure0.03-0.4 MPA
Height3000 mm
Width2000 mm
Length7000 mm
Voltage220V-415 V

Our firm is betrothed in presenting a broad series of Industrial Hydrocyclones. Our offered products are widely admired for their lightweight, durable finish and user-friendly. Moreover, professional make these products as per industry norms. These products are available in the market in dissimilar sizes and designs at affordable prices.

Features:
  • Sturdy structure
  • Low maintenance
  • Precisely designed


Additional Information:

  • Item Code: HTS-03

View Complete Details

Yes, I am interested!

Multi Cyclone Separator
Interested in this product?
Get Best Quote

Multi Cyclone Separator

Get Latest Price

Capacity10000 m3/h
Thickness3.15 mm
Air volumesup to 100000 m3/hr
Diameter800 mm
Dimensions395 - 25 mm
Height2500 mm

We hold proficiency in presenting an extensive series of Cyclone Separator.These products are developed as per industry norms using the finest-grade raw material and advanced technique. Our products are widely used due to longer life and sturdy nature. Moreover, we offer this product at nominal prices.

Features:
  • Strong nature
  • Low maintenance
  • Low prices


Additional Information:

  • Item Code: CST-05

View Complete Details

Yes, I am interested!

Centrifugal Hydrocyclone
Interested in this product?
Get Best Quote

Centrifugal Hydrocyclone

Get Latest Price

MaterialCarbon Steel
Power0.55-1.1 kw
Cyclone cylinder diameter200-300 mm
Working pressure0.20~0.45 Mpa
Outlet diameter6" - 8"
Motor power0.5 kW

A Centrifugal Hydrocyclone is a device to classify, separate or sort particles in a liquid suspension based on the ratio of their centripetal force to fluid resistance.

This ratio is high for dense (where separation by density is required) and coarse (where separation by size is required) particles, and low for light and fine particles.

Hydrocyclones also find application in the separation of liquids of different densities.

A hydrocyclone will normally have a cylindrical section at the top where the liquid is being fed tangentially, and a conical base.

The angle, and hence length of the conical section, play a role in determining operating characteristics.

A hydrocyclone has two exits on the axis: the smaller on the bottom (underflow or reject) and a larger at the top (overflow or accept).

The underflow is generally the denser or coarser fraction, while the overflow is the lighter or finer fraction.

Internally, centrifugal force is countered by the resistance of the liquid, with the effect that larger or denser particles are transported to the wall for eventual exit at the reject side with a limited amount of liquid, while the finer, or less dense particles, remain in the liquid and exit at the overflow side through a tube extending slightly into the body of the cyclone at the center.

Forward hydrocyclones remove particles that are denser than the surrounding fluid, while reverse hydrocyclones remove particles that are less dense than the surrounding fluid.

In a reverse hydrocyclone the overflow is at the apex and the underflow at the base.

There are also parallel-flow hydrocyclones where both the accept and reject are removed at the apex.

Parallel-flow hydrocyclones remove particles that are lighter than the surrounding fluid.

In a suspension of particles with the same density, a relatively sharp cut can be made. The size at which the particles separate is a function of cyclone diameter, exit dimensions, feed pressure and the relative characteristics of the particles and the liquid.

The efficiency of separation is a function of the solids' concentration: the higher the concentration, the lower the efficiency of separation.

There is also a significant difference in suspension density between the base exit (fines) and the apex exit, where there is little liquid flow.

If the size range of the particles is limited, but there are differences in density between types of particles, the denser particles will exit preferentially at the apex.

The device is, therefore, a means of selective concentration of, for example, minerals.

This device is also related to the centrifuge; both of them are intended to separate heavies and lights in the liquid by application of centrifugal force.

Additional Information:

  • Item Code: CST-07

View Complete Details

Yes, I am interested!

Separation Hydrocyclone
Interested in this product?
Get Best Quote

Separation Hydrocyclone

Get Latest Price

Inlet Outlet2 /50 Inch/mm
Range of Flow Rate15-25 m3/hr
Dimensions151 -990 mm
Capacity of Underflow Chamber8 - 10 Ltr
Gross Weight7.6 - 9.6 Kg
Operating Pressure60 - 80 m/h

We offer Separation hydrocyclone.

These products are developed with the optimum quality raw material which is sourced from industry renowned retailers.

Moreover, professional employ advanced technique and reliable machines to make these products as per industry standards.

Due to high demand, professionals manufacture this product in varied sizes and designs.

Features:
  • Easy to use
  • High durable
  • Quality assured


Additional Information:

  • Item Code: HST-08

View Complete Details

Yes, I am interested!

Krebs Hydrocyclones
Interested in this product?
Get Best Quote

Krebs Hydrocyclones

Get Latest Price

Capacity140-220 m3/h
Voltage220 V
Weight2.5 t
Power7.5kw
Diameter100 - 660 mm
The maximum feed size1 - 16 mm

A hydrocyclone is most often used to separate "heavies" from a liquid mixture originating at a centrifugal pump or some other continuous source of pressurized liquid.

A hydrocyclone is most likely to be the right choice for processes where "lights" are the greater part of the mixture and where the "heavies" settle fairly easily.

Generally, hydrocyclones are used in continuous flow systems so that the instantaneous liquid inflow to the hydrocyclone is equal to the total instantaneous outflow of "lights" plus "heavies".

In cases where "heavies" are a very small part of the whole liquid, it is sometimes advantageous to accumulate them in the bottom of the hydrocyclone for batch wise removal.

 



Additional Information:

  • Item Code: KHS-11

View Complete Details

Yes, I am interested!

Centrifugal Separator Hydrocyclone
Interested in this product?
Get Best Quote
Weight1400 kg
Cylinder ID75 - 660 mm
Cylinder height100 - 600 mm
Cone angle10 -20 degree
Feed line square inlet50x50 - 340*340
Apex ID8 - 64

Cyclonic separation is a method of removing particulates from an air, gas or liquid stream, without the use of filters, through vortex separation.

Rotational Effects and gravity are used to separate mixtures of solids and fluids.

The method can also be used to separate fine droplets of liquid from a gaseous stream.

A high speed rotating (air)flow is established within a cylindrical or conical container called a cyclone. Air flows in a helical pattern, beginning at the top (wide end) of the cyclone and ending at the bottom (narrow) end before exiting the cyclone in a straight stream through the centre of the cyclone and out the top.

Larger (denser) particles in the rotating stream have too much inertia to follow the tight curve of the stream, and strike the outside wall, then falling to the bottom of the cyclone where they can be removed.

In a conical system, as the rotating flow moves towards the narrow end of the cyclone, the rotational radius of the stream is reduced, thus separating smaller and smaller particles.

The cyclone geometry, together with flow rate, defines the cut point of the cyclone. This is the size of particle that will be removed from the stream with a 50% efficiency.

Particles larger than the cut point will be removed with a greater efficiency and smaller particles with a lower efficiency.

An alternative cyclone design uses a secondary air flow within the cyclone to keep the collected particles from striking the walls, to protect them from abrasion.

The primary air flow containing the particulates enters from the bottom of the cyclone and is forced into spiral rotation by stationary spinner vanes.

The secondary air flow enters from the top of the cyclone and moves downward toward the bottom, intercepting the particulate from the primary air.

The secondary air flow also allows the collector to optionally be mounted horizontally, because it pushes the particulate toward the collection area, and does not rely solely on gravity to perform this function.

Additional Information:

  • Item Code: CST-12

View Complete Details

Yes, I am interested!

Polyurethane Hydrocyclone
Interested in this product?
Get Best Quote
Capacity5 - 360 m3/h
Internal Diameter100 - 600 mm
Inlet Diameter23 - 187 mm
Overflow Diameter20-240 mm
Underflow Diameter8 - 150 mm
Max Feeding Size1- 16 mm

With the active support of our team of experts, we are engaged in offering a huge gamut of Polyurethane hydrocyclone.

Our company is highly acclaimed in offering a wide range of Polyurethane hydrocyclone.

This high-quality Polyurethane Hydrocyclone is designed and developed in line with the latest trends and parameters set by the industry.

Thus, this Polyurethane Hydrocyclone is widely appreciated for its high durability, quality and efficiency.

Features:
  • Lightweight overflow elbow
  • Vortex finders
  • Loose liners
  • Weep holes prevent damage to housings
  • Spigot
  • High-efficiency inlet designs


Additional Information:

  • Item Code: PST-04

View Complete Details

Yes, I am interested!

Hydrocyclone Filter
Interested in this product?
Get Best Quote

Hydrocyclone Filter

Get Latest Price

Production Capacity60-105 m3/h
Diameter125-550 mm
Power24 Kw
Weight750kg
Voltage380V

These Hydrocyclones formulated using high-quality raw material and industry defined parameters. Hydrocyclone Filter is used for separating solids from liquids or to separate liquids of different density. Our experts make use of advanced techniques in the production process of these products. We ensure to deliver quality products within the stipulated time period.These design improvements result in lower operating cost and easy to maintain.

Features:
  • Compact size
  • Accurate dimensions
  • Precise designs


Additional Information:

  • Item Code: HFT-01

View Complete Details

Yes, I am interested!
© Bhajjanka Ispat Private Limited. All Rights Reserved (Terms of Use)