X
View Mobile Number 88% Response Rate

Products & Services

+View All

Master Builder

Our range of products include MasterEmaco SBR2 Waterproofing Systems, MasterTop 100 - Surface Hardener, MasterTile FLX 424 Cementitious Tile Adhesive, Masterseal 911 - Adhesive For Water Swelling Gasket, MasterProtect 180 and Masterkure 181.

MasterEmaco SBR2 Waterproofing Systems
Interested in this product?
Get Best Quote
Packaging Size20 Ltr
BrandBASF
Solid Content37+-1%
Mortar Compressive Strength40MPa at 28days
Mortar Flexural Strength10MPa
Mortar Tensile Strength5MPa
pH8 +- 1
Relative Density1.02+- 0.01 at 25 Degree Celsius

MasterEmaco SBR 2 is a milky-white, StyreneButadiene co-polymer latex liquid, produced from styrene and butadiene by high pressure emulsion polymerization with high dispersive properties.When used with cement, concrete and plaster, it reduces the mixing time through high dispersion of the polymer and improves waterproofing, new to old concrete/plaster bonding and strength characteristics and reduces shrinkage and cracking of the mix.

View Complete Details

Yes, I am interested!

MasterTop 100 - Surface Hardener
Interested in this product?
Get Best Quote
Quantity Per Pack25 Kg
Shelf Life6 months
CoverageCoverage 5 kg / sqm
AspectFree Flowing Powder
Abrasion resistance0.65 mm at 60 minutes
Impact Resistance50% weight loss

MasterTop 100 is a pre-mixed powder designed to be applied as a dry shake over freshly floated concrete floor. MasterTop 100 creates an aesthetically pleasing, coloured floor with significantly improved abrasion resistance. It is based on selected hard wearing mineral aggregates blended with alkali and light fast pigments and hydraulic binders. MasterTop 100 is available in various standard colours.

View Complete Details

Yes, I am interested!

MasterTile FLX 424 Cementitious Tile Adhesive
Interested in this product?
Get Best Quote
BrandMaster Builder
FormPowder
Packaging TypeHDPE Bag
Shelf Life6 Months
Working Timemin 1 hr
Open Time30 minutes
Temperature ResistanceUp to 80 Degree Celsius
Pack Size25 Kg
Water/Powder ratio by weight0.24-0.25
Temperature Range for ApplicationFrom +5 to +35 Degree Celsius
Slake TimeApprox 3 minutes
Maximum Thickness of Adhesive Bed10 mm

Description:
  • Deformable multipurpose grey/White coloured tile adhesive for all ceramic coverings, porcelain, nonmoisture sensitive natural stones and substrates Master Tile FLX 424 is a grey colored, polymer enriched, cementitious flexible tile adhesive with extended open time and reduced slip for thin bed fixing of fully vitrified ceramic tiles and porcelain mosaic tiles in interior or exterior situations, especially those exposed to permanently wet conditions or substrates subject to deformations.


Recommended Uses

  • MasterTile FLX 424 is the adhesive of choice for demanding substrates and demanding situations.


Typical application Areas include:

  • Suitable for Ceramic tiles conforming to IS13712(2006) type Ia, Ib, IIa ,IIb tiles
  • Wet areas including kitchen, bathrooms & Showers in domestic, institutional, commercial and industrial location
  • Tile on tile application.
  • For internal &external applications
  • For Floors, Walls, Podium decks, roofs including large format tiles.
  • For laying non-moisture sensitive natural stone
  • For Laying Ceramic, Porcelain, Glass Mosaic, Fully vitrified tiles and brick tiles.
  • For Swimming pools, pool surrounds, wet rooms and cold storage depots
  • For substrates such as cement screeds, precast concrete elements, aerated concrete, heated screeds, plaster and existing floors and walls
  • For fixing tiles on bonded waterproofing membranes such as MasterSeal 561.
  • On cementitious screeds, ground anhydrite and/or gypsum based floated screeds, precast concrete elements, aerated concrete, heated screeds, plaster boards, gypsum fibre boards, dry screeds, plaster, masonry, old ceramic tiles.

View Complete Details

Yes, I am interested!

Masterseal 911 - Adhesive For Water Swelling Gasket
Interested in this product?
Get Best Quote
ColorWhite
Density- 1.5
Tensile Strength- 0.9 MPa
OdourNone
ConsistencyPaste
Content of Solids100%
Hardening systemHumidity
Hardening Velocity4mm / 24hours

MasterSeal 911 is a one component adhesive, based on a modified silane polymer used to secure the MasterSeal 910 swelling gasket to all common substrates in construction.

View Complete Details

Yes, I am interested!

MasterProtect 180
Interested in this product?
Get Best Quote

MasterProtect 180

Get Latest Price

BrandMasterProtect
Country of OriginMade in India
Volume solids100%
Pot Life60 mins. at 25 degree celcius
Mixed Density1.55 kg/litre at 25 degree celcius
Touch Dry4 hours at 30 degree celcius
Mixing Ratio , by weight10014.4 (AB)

MasterProtect 180 is a two-component epoxy resin system, comprising pigmented base and a hardener, specifically formulated to protect concrete and steel. On mixing of the two components, it yields a high build, chemical resistant protective coating, which cures to a semi glossy, ultra dense surface that is easily cleaned, hygienic and safe for contact with foodstuff and potable water.

View Complete Details

Yes, I am interested!

Masterkure 181
Interested in this product?
Get Best Quote
Usage/ApplicationIndustrial
BrandBASF
Specific Gravity0.82+-0.01 at 25 Degree Celsius
Country of OriginMade in India
AppearanceClear / white liquid
White0.855+-0.01 at 25 Degree Celsius
Flash point30 Degree Celsius
Dry Film AppearanceClear or white

MasterKure 181 is a non-degrading, membraneforming liquid based on specially formulated acrylic resin suitable for curing newly placed or freshly deshuttered concrete; assists in the retention of water during hydration. The resultant film retains sufficient moisture in the concrete to ensure full hydration of the cement; essential for optimum strength development. The cured concrete is typically harder and exhibits a dust free surface with a reduced incidence of drying shrinkage cracks. Additionally, the membrane acts as a primer system for many subsequent surface finishes that do not rely on penetration for substrate bond. When applied to floors, the MasterKure 181seals and dustproof the surface, eliminating the primary source of abrasion and enhancing durability. MasterKure 181 is available as a clear translucent liquid and white solar reflective version.

View Complete Details

Yes, I am interested!

MasterFlow 410 - Flowable Epoxy Resin Grout
Interested in this product?
Get Best Quote
BrandBASF
FeaturesFlowable Epoxy Resin Grout
Flexural Strength40 MPa @ 7 days @ 25 deg cel.
Pot Life Of Mix60 mintues @30 deg cel.
Working Timeset at 25 DegreeC will be in 4-6 hours.
Shelf Life12 Months

Masterflow 410 is a solvent-free low exotherm, filler extended grout, based on modified epoxy resin and is designed for use as a precision, heavy duty chocking grout for engineering applications. It is supplied as a three component system consisting of epoxy resin, combined with inert fillers and the hardener, to produce a high viscosity flowable liquid grout suitable to fill gaps or voids.

View Complete Details

Yes, I am interested!

MasterTile 25 Cementitious Tile Adhesive Fixing System
Interested in this product?
Get Best Quote
BrandBASF
FormPowder
Packaging TypeHDPE Bag
Shelf Life6 Months
Open Time>0.5N/mm (upto10min)
Pack Size25 Kg,5 Kg
Fresh Wet Density1.75 kg/litre
Water/powder Ratio, by Weight0.18 - 0.210
Tensile Adhesion at Room Temperature> 0.5 N/mm 2
Chloride Content< 0.2%

MasterTile 25 is a grey cementitious powder modified with specialty polymers and additives to comply with Indian Standards. This versatile, easyto-handle, cement-based adhesive is perfect for fixing ceramic tiles (mostly non-vitrified), and quarry tiles. It provides strong adhesion to cement/sand screeds, to in-situ/pre-cast and aerated concrete, and brickwork.

View Complete Details

Yes, I am interested!

  • Masterseal 502 - Deep Penetrative, Reactive, Capillary Waterproofing System For Concrete And Mortar
  • Masterseal 502 - Deep Penetrative, Reactive, Capillary Waterproofing System For Concrete And Mortar
  • Masterseal 502 - Deep Penetrative, Reactive, Capillary Waterproofing System For Concrete And Mortar
Masterseal 502 - Deep Penetrative, Reactive, Capillary Waterproofing System For Concrete And Mortar
Interested in this product?
Get Best Quote
BrandBASF
Country of OriginMade in India
Mixed Density2.3 kg/lire
Settling time4 hours at 25 Degree Celcius
Coverage10 kg/m square at 4-5 mm thickness
AspectFree Flowing Powder
Setting Time4 Hours at 25 Degree Celsius

MasterSeal 501 and MasterSeal 502 are components of BASF’s crystalline capillary waterproofing system. These products contain specialist additives that play the role of the catalyst in the formation of water-insoluble crystalline micro-structures deep within the capillaries and interstices of cementitious matrix of concrete and mortars. As the crystalline capillary waterproofing system enables effective pore sealing it does not rely on film formation on the surface and is not affected by the negative hydrostatic pressure. The system is equally effective against positive and negative water pressure or osmotic pressure. MasterSeal 501, is the most concentrated form within the BASF crystalline waterproofing system and contains the maximum amount of specialist catalysts. MasterSeal 501 can be used as a coating, dry shake or as an additive in the concrete or mortar mix.

View Complete Details

Yes, I am interested!

Master Brace 4500 -Saturating Resin
Interested in this product?
Get Best Quote
BrandMaster Brace
Packaging Size5 Kg
DensityMixed density (kg/Lt) 1.13 +- 0.03
MaterialBlue pigmented epoxy resin for saturation
Shelf Life12 Months
Curing Time7 days
Pot Life25 minutes at 25 Degree Celsius

Master Brace 4500 is a 100% solids long pot lifeblue pigmented epoxy resin for saturation of Master Brace fibre sheet to form insitu Fibre Reinforced Polymer composites.

Recommended Uses:
  • Master Brace 4500 is used to saturate theMaster
  • Brace carbon, glass or aramid fabricsheets to create a composite with thestructure
  • Master Brace composites can be used toincrease flexural, shear, and axial loadcapacity
  • Increased impact resistance and to provideblast mitigation
  • Reduction of crack propagation andincreased resistance to fatigue.

View Complete Details

Yes, I am interested!

MasterGlenium 51 - Polycarboxylic Ether Based Water Reducing Super Plasticizer Admixture
Interested in this product?
Get Best Quote
BrandBASF
Packaging TypeBarrel
FormPolycarboxylic ether based
Shelf Life12 Months
Dosage0.5 - 1.5 kg for 100 kg binder (cement-micro silica-flyash)
Density1.082 - 1.142 kg/liter
Country of OriginMade in India

MasterGlenium® 51 is a polycarboxylic ether based, high range water reducing new second generation super plasticizer concrete admixture developed for readymix concrete and precast industry that needs high early and final strengths and durability.

Advantages:
  • Improves concrete’s early and final compressive and flexural strengths, adherence to steel, and impermeability compared to traditional super plasticizers (NSF or MSF***).
  • Improves concrete’s mechanic properties like carbonation, resistance to chlorine ion attack, resistance to aggressive chemicals, shrinkage, and creeping.
  • Enables the production of low water/cement ratio, low segregation and leaching risk Rheoplastic concrete. 
  • Enables production of high early strength concrete even in low temperatures.
  • Minimizes stripping time.
  • Improves wear resistance of concrete by reducing segregation and bleeding. 
  • Reduces application periods of resin based pavement systems on new concrete with its low water/cement ratio, high early strength, and bleeding reduction properties.
  • Increases Freezing – Thawing resistance of concrete.
  • Reduces curing time and curing temperature in the production of precast elements.
  • Can be used with all cement types. Shows less sensitivity to material differentiation.
  • MasterGlenium® 51 does not contain.

View Complete Details

Yes, I am interested!

Masterseal P640 - Single Component Polyurethane Primer
Interested in this product?
Get Best Quote
Viscosity220 mPas
Density1.0 g/cm square
Chemical BasePolyurethane
Mixing RatioSingle component
Solid content51%
Permissible relative humiditymax 85%

MasterSeal P 640 is a single component, polyurethane based, solvent containing primer for absorbent surfaces in applications where MasterSeal M 640 is utilized.

View Complete Details

Yes, I am interested!

Get in touch with us

Reach Us

Bils Innovations India Private LimitedNo. 310, 3rd Floor, Vardhman, Jaypee Plaza CC, Plot No. 6, Dwarka, Gurgaon & Dwarka, Delhi-110075, India

Manish Sharma (Director)

View Mobile Number88% Call Response Rate

Send SMS
Send Email
Send Payment
Leave a Message, we will call you back!
Send your enquiry to this supplier
I agree to the terms and privacy policy

We Accept Online Payments

All Rights Reserved (Terms of Use)