Products & Services+View All
233 products available
- AH 3194 Integrated Circuits
- TLP785GB,F Integrated Circuits BY TOSHIBA
- NCE1507AK NCE N-Channel Enhancement Mode Power MOSFET
- MM3474L02VBE 20-TSSOP Battery Protection IC - Mitsumi Japan
- M74HCO4RM13TR IC INVERTER 6CH 1-INP 14SO
- MOC3063 Integrated Circuits
- AO3409 , MOSFET, TO-236 (SOT-23)
- U74AHC3G04G MSOP-8 IC BY UTC
- ICL7665SCPA Power IC
- DSP032N08NA 85V 170A WXDH
- 8205LA TSSOP-8 N CHANNEL MOSFET FM
- MCP6562 Amplifier Ic IC COMPARATOR 2 GEN PUR 8MSOP
- ADC0809CCN Data Converter Ic
- MG87FE2051AE20 Micro Controller DIP20 Megawin
- DSPIC30F2010 I/SO Microchip
- ADG212AKN Analogue Switch Ic
- TCMT4600 VISHAY Optocoupler, Phototransistor Output, AC Input, Single/Quad Channel
- HT66F0181 16NSOP HOLTEK
- DH025N03 TO-220C 150A 30V N-Channel WXDH
- FZ-5050RGBC350A16 5050 3W RGB SMD LED
- U74AHC3G04G-SM1-R MSOP-8 UTC
- UCC287502DBVR DBV (SOT23-6) TEXAS INSTRUMENTS
- STM32F030R8T6 ARM Microcontroller IC MCU 32BIT 64KB FLASH 64LQFP
- 27C512 Eprom FDIP28W (F) IC 512 Kbit ST
- 74Hc245D Integrated Circuits PHILIPS
- Cd6283Cs Voice Ic
- HT9200A DTMF GENERATOR IC HOLTEK
- Nexperia Sot 23 Bc857b Transistor
- TIP32C TO-220 ST POWER TRANSISTOR
- Mc33078Bdr2G On Semi Integrated Circuits
- 1500W 27V 1.5KE27A / 1.5KE27CA TVS Diode
- SG3524N Texas Instruments IC REG CTRLR MULT TOPOLOGY 16DIP
- MT8870DE DTMF Receiver
- PAM8403DR-H, Diodes Incorporated
- TL082 SMD Texas Instruments
- UC3846N DIP HLF
- AH2526 4PIN SIP
- ISL83202IBZT SOIC-16 MOSFET DRIVER-RENESAS
- TPS65150PWPR TEXAS INSTRUMENT
- MAX485ESA +T ANALOG DEVICES
Integrated Circuits
Leading Wholesaler of AH 3194 Integrated Circuits, TLP785GB,F Integrated Circuits BY TOSHIBA, NCE1507AK NCE N-Channel Enhancement Mode Power MOSFET, MM3474L02VBE 20-TSSOP Battery Protection IC - Mitsumi Japan, M74HCO4RM13TR IC INVERTER 6CH 1-INP 14SO and MOC3063 Integrated Circuits from Mumbai.
₹ 35/Piece
₹ 25/Piece
₹ 6/Piece
₹ 10/Piece
₹ 3/Piece
₹ 5.50/Piece
₹ 52/Piece
₹ 22/Piece
₹ 23/Piece
₹ 15/Piece
₹ 100/Piece
₹ 12/Piece
₹ 12.50/Piece
₹ 12/Piece
₹ 4/Piece
₹ 5/Piece
₹ 15/Piece
₹ 14/Piece
₹ 11/Piece
₹ 10/Piece
₹ 9/Piece
₹ 52/Piece
₹ 16/Piece
₹ 5/Piece
₹ 300/Piece
₹ 7/Piece
₹ 13/Piece
₹ 30/Piece
₹ 36/Piece
₹ 90/Piece
₹ 40/Piece
₹ 38/Piece
Interested in this product?
Get Best Quote
| Number Of Pins | 28 Pin |
| Color | Black |
| Linearity | 0.02% |
| Functionality | Memory, Micro Controller, Processor |
| Model No. | HCF40168E |
The AH31 is a high dynamic range amplifier in a low-cost surface-mount package. Its robustness and ease of use make it an ideal candidate for the core of any RFID reader application. It is compliant with EPC and ISO standards. The combination of low noise figure, high gain, and high output IP3 is ideal as an IF amplifier for receiver and transmitter applications. The device combines dependable performance with consistent quality to maintain MTTF values exceeding 100 years at mounting temperatures of +85°C and is housed in a SOT-89 industry-standard SMT package.The broadband MMIC amplifier can be directly applied to various current and next generation RFID technologies such as EPC, ISO, ETSI, and ANSI. Their small size makes them ideal for PCMCIA applications.
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
TLP785GB,F Integrated Circuits BY TOSHIBA
₹ 25/PieceGet Latest Price
Minimum Order Quantity: 2000 Piece
| Number Of Pins | 8 Pin |
| Usage/Application | Electronics |
| Mounting Type | DIP |
| Part Number | TLP785GB |
| Package | Box |
| TYPE | OPTOCOUPLER |
The TLP785 is an optocoupler manufactured by Toshiba. It features a phototransistor output and is designed for signal isolation in various electronic circuits. The device provides reliable isolation between input and output, making it ideal for applications such as switching power supplies, motor control, and industrial automation. It offers high voltage isolation and low input current, ensuring efficient performance in harsh environments.
Additional Information:
- Delivery Time: 10-14 DAYS
- Packaging Details: TO-
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Number Of Pins | 3 PIN |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Propagation Delay Time | 35 ns |
| Minimum Order Quantity | 1000 |
The NCE1507AK uses advanced trench technology and design to provide excellent RDS(ON) with low gate charge. It can be used in a wide variety of applications. ● VDS = 150V,ID = 7A RDS(ON) < 300mΩ @ VGS=10V (Typ:280mΩ) ● High density cell design for ultra low Rdson ● Fully characterized avalanche voltage and current ● Excellent package for good heat dissipation ● Power switching application ● Hard switched and high frequency circuits
Additional Information:
- Delivery Time: 10-14 DAYS
- Packaging Details: TO-252 -2L
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
MM3474L02VBE 20-TSSOP Battery Protection IC - Mitsumi Japan
₹ 70/PieceGet Latest Price
Minimum Order Quantity: 2000 Piece
| Number Of Pins | 20 Pin |
| Package / Case | 20-TSSOP |
| Mounting Type | Surface Mount |
| Operating Temperature | -40 DegreeC ~ 85 DegreeC |
| Function | Battery Protection |
| Packaging | Tape & Reel (TR) |
MM3474 series is an overcharge, overdischarge and overcurrent protection IC for a lithium-ion / lithium-polymer secondary battery. This supports 3 to 5 serial cells, and the number of cells can be switched over by inputting high / low signal to SEL terminal. MM3474 series can protect Lithium ion battery pack of 6-plus serial cells by connecting in cascade. This also provides the control terminals of output overdischarge detection (SDC) and output overcharge detection (SOC), which allows configuring an application with fewer external parts for 6 or more cells connected in series.
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Number Of Pins | 14 Pin |
| Brand | STMicroelectronics |
| Package Type | SOIC-14 |
| Part Number | M74HCO4RM13TR |
| Mounting Type | SMD/SMT |
| Pin Count | 14 |
| Maximum Operating Supply Voltage | 6 V |
| Maximum Operating Temperature | + 125 C |
| Minimum Operating Temperature | - 40 C |
The M74HC04 is a high-speed CMOS hex inverter manufactured using silicon gate C2MOS technology. The internal circuit is composed of 3 stages including a buffer output which enables high noise immunity and stable output. All inputs are equipped with protection circuits to guard against static discharge and transient excess voltage
Additional Information:
- Packaging Details: REEL
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Number Of Pins | 6 Pin |
| Mounting Style | Through Hole |
| Brand | Lite On |
| If - Forward Current: | 50 mA |
| Output Type | PhotoTriac |
Triac & SCR Output Optocouplers Optocoupler TRIAC
Features
- Isolation voltage between input and output VisoV_{iso}Viso: 5,000Vrms_{rms}rms
- 6-pin DIP zero-cross optoisolators triac driver output
- High repetitive peak off-state voltage VDRMV_{DRM}VDRM: Min. 600V
- High critical rate of rise of off-state voltage dV/dtdV/dtdV/dt: Min. 1000V/μs
- Dual-in-line package: MOC3061 / MOC3062 / MOC3063
- Wide lead spacing package: MOC3061M / MOC3062M / MOC3063M
- Surface mounting package: MOC3061S / MOC3062S / MOC3063S
- Tape and reel packaging:
- MOC3061S-TA1
- MOC3062S-TA1
- MOC3063S-TA1
Safety approval
- UL 1577
- cUL CA5A
- VDE DIN EN60747-5-5 (VDE 0884-5)
- RoHS Compliance
All materials used in the device are compliant with the EU RoHS directive (No. 2002/95/EC).
Additional Information:
- Packaging Details: Tube
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Voltage | 100V |
| Channel Type | P Channel |
| Brand | AO3409 , MOSFET, TO-236 (SOT-23) |
| Part Number | AO3409 , MOSFET, TO-236 (SOT-23) |
| Maximum Drain Source Resistance | AO3409 , MOSFET, TO-236 (SOT-23) |
| Maximum Operating Temperature | AO3409 , MOSFET, TO-236 (SOT-23) |
| Pin Count | AO3409 , MOSFET, TO-236 (SOT-23) |
The AO3409 uses advanced trench technology to provide excellent RDS(ON) and low gate charge. This device is suitable for use as a load switch or in PWM applications. Standard Product AO3409 is Pb-free (meets ROHS & Sony 259 specifications). AO3409L is a Green Product ordering option. AO3409 and AO3409L are electrically identical.
Features :
VDS (V) = -30V ID = -2.6 A (VGS = -10V) RDS(ON) < 130mΩ (VGS = -10V) RDS(ON) < 200mΩ (VGS = -4.5V
Additional Information:
- Delivery Time: 10-14DAYS
- Packaging Details: TO-236 (SOT-23)
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Output Voltage | 5V |
| Brand | UTC |
| Model Name/Number | U74AHC3G04G |
| Output Current | 20 |
| Color | Black |
| PACKING TYPE | TAPE REEL |
The U74AHC3G04 are high-speed Si-gate CMOS devices providing three inverting buffers with the function Y A =
FEATURES * Low Power Dissipation * Symmetrical Output Impedance * Balanced Propagation Delays * High Noise Immunity
Additional Information:
- Delivery Time: 10-14DAYS
- Packaging Details: MSOP-8
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Type | Leaded |
| Voltage | 120V |
| Number Of Pins | 4 Pin |
| Phase | Single |
| Model No | ICL7665SCPA |
| Frequency | 50Hz |
The ICL7665SCPA is a specialized Power Management IC designed primarily for voltage conversion applications, often used in low-power and battery-operated systems.
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Channel Type | N Channel |
| Brand | WXDH |
| Maximum Gate Source Voltage | +-20 |
| Maximum Continuous Drain Current | 100 |
| Part Number | DSP032N08NA |
| Pin Count | 8 |
These N-channel enhancement mode power mosfets used advanced splite gate trench technology design, provided excellent Rdson and low gate charge. Which accords with the RoHS standard.2 Features ● AEC-Q101 qualified ● Fast switching ● Low on resistance ● Low gate charge ● High avalanche current ● Low reverse transfer capacitances ● 100% single pulse avalanche energy test ● 100% ΔVDS test 3 Applications ● Synchronous rectification in SMPS ● Hard switching and high speed circuit ● Power tools ● UPS ● Motor control
Additional Information:
- Delivery Time: 10-14DAYS
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Channel Type | N Channel |
| Device Type | Dual N-Channel Enhancement Mode MOSFET |
| Max voltage | 20v |
| Continuous Drain Current | 6A |
| Gate Threshold Voltage | 0.5v - 1.2v |
| Package Type | SOP-8 (Surface Mount) |
An Integrated Circuit (IC) is a miniaturized electronic circuit consisting of semiconductors, resistors, capacitors, and transistors embedded into a single chip. ICs are fundamental to modern electronics, used to perform tasks ranging from simple logic operations to complex data processing in everything from smartphones to industrial machines.
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Mounting Type | SMD |
| Number Of Pins | 8 |
| Part Number | MCP6562 |
| Voltage | 5.5V |
| Operating Temperature | -40 DegreeC to +125 DegreeC |
The Microchip Technology, Inc. MCP6561/1R/1U/2/4 families of CMOS/TTL compatible comparators are offered in single, dual, and quad configurations. These comparators are optimized for low power 1.8V, single-supply applications with greater than rail-to-rail input operation. The internal input hysteresis eliminates output switching due to internal input noise voltage, reducing current draw. The push-pull output of the MCP6561/1R/1U/2/4 family supports rail-to-rail output swing, and interfaces with CMOS/TTL logic. The output toggle frequency can reach a typical of 4 MHz (typical) while limiting supply current surges and dynamic power consumption during switching. This family operates with single supply voltage of 1.8V to 5.5V while drawing less than 100 µA/comparator of quiescent current (typical).
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Mounting Type | DIP |
| Number of Channels | 8-channel Multiplexer Input |
| Operating Voltage | 5v |
| Device Type | 8-bit Analog-to-Digital Converter (ADC) |
| Package Type | DIP-28 (Dual In-line Package, 28 pins) |
The ADC0809CCN is an 8-bit Analog-to-Digital Converter (ADC) IC. It is commonly used to convert an analog voltage signal into a corresponding digital value. Below is a brief description of the ADC0809CCN:
Key Features:-
Resolution: 8-bit resolution, meaning it can represent the input signal with 256 discrete digital values (0-255).
-
Input Channels: The ADC0809 has 8 input channels (0-7), meaning it can sample signals from 8 different sources sequentially.
-
Voltage Range: The input voltage for the ADC0809 should be within the range of 0 to Vcc (typically 5V or 3.3V depending on the system).
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Core Size | 8 Bit |
| RAM Size | 256 bytes |
| Part Number | MG87FE2051AE20 |
| Pin Count | 20 |
| Maximum Operating Supply Voltage | 5.5V |
| Flash Memory | 2 KB |
The MG87FE2051AE20 parts manufactured by MEGAWIN are available for purchase at Jotrin Electronics. Here you can find various types and values of electronic parts from the world's leading manufacturers. The MG87FE2051AE20 components are carefully chosen, undergo stringent quality control, and are successfully meet all required standards.
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Core Size | 16 Bit |
| Mounting Type | Surface-Mount |
| Maximum Operating Temperature | +85 DegreeC |
| Part Number | dsPIC30F2010-I/SO |
| Voltage Supply | 5.5 V |
• High current sink/source I/O pins: 25 mA/25 mA • Three 16-bit timers/counters; optionally pair up 16-bit timers into 32-bit timer modules • Four 16-bit capture input functions • Two 16-bit compare/PWM output functions - Dual Compare mode available • 3-wire SPI modules (supports 4 Frame modes) • I2CTM module supports Multi-Master/Slave mode and 7-bit/10-bit addressing • Addressable UART modules with FIFO buffers
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Number Of Pins | 16 pin |
| Device Type | Single-Pole Single-Throw (SPST) Analog Switch |
| Package Type | SOIC-8 (Small Outline Integrated Circuit, 8 pins) |
| Supply Voltage Range | 4.5v to 12v |
| Resistance | 2.5 Ohm |
| Switching Speed | 150 ns |
The ADG212AKN is a high-performance analogue switch IC manufactured by Analog Devices. It is part of the ADG212 series, which is designed to handle both analogue and digital signals.
Additional Information:
- Packaging Details: DIP, SOIC
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
TCMT4600 VISHAY Optocoupler, Phototransistor Output, AC Input, Single/Quad Channel
₹ 22.50/PieceGet Latest Price
| Number Of Channels | 1 channel |
| Brand | Binary |
| Part Number | TCMT4600 |
| Mounting Type | SMD |
| Output Device Type | Phototransistor |
| Country of Origin | Made in India |
| Packaging Type | Box |
• Low profile package (half pitch)• AC isolation test voltage 3750 VRMS• Low coupling capacitance of typical 0.3 pF• Low temperature coefficient of CTR• Wide ambient temperature range• Lead (Pb)-free component• Component in accordance to RoHS 2002/95/EC andWEEE 2002/96/ECAPPLICATIONS• Programmable logic controllersAGENCY APPROVALS• UL1577, file no. E76222 system code M, double protection• C-UL CSA 22.2 bulletin 5A
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Number Of Pins | 20 Pin |
| PINS | 16 |
| A/D CONVERTER | 10 BIT |
| Flash Memory | 8 BIT |
| Flash Program Memory | 4Kx15 |
| - RAM Data Memory | 128x8 |
| Emulated EEPROM Memory | 32x15 |
The device is a Flash Memory A/D type 8-bit high performance RISC architecture microcontroller. Offering users the convenience of Flash Memory multi-programming features, the device also includes a wide range of functions and features. Other memory includes an area of RAM Data Memory as well as an area of Emulated EEPROM memory for storage of non-volatile data such as serial numbers, calibration data, etc. Analog feature includes a multi-channel 10-bit A/D converter. Multiple and extremely flexible Timer Modules provide timing, pulse generation and PWM generation functions. Protective features such as an internal Watchdog Timer and Low Voltage Reset function coupled with excellent noise immunity and ESD protection ensures that reliable operation is maintained in hostile electrical environments. A full choice of internal high and low speed oscillators are provided and the two fully integrated system oscillators require no external components for their implementation. The ability to operate and switch dynamically between a range of operating modes using different clock sources gives users the ability to optimize microcontroller operation and minimize power consumption. The inclusion of flexible I/O programming features and Time Base funcitons along with other features ensure that the device will find excellent use in electronic metering, environmental monitoring, handheld instruments, household appliances, electronically controlled tools, motor driving in addition to many others
Additional Information:
- Delivery Time: 10-15DAYS
- Packaging Details: 16NSOP
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
DH025N03 TO-220C 150A 30V N-Channel WXDH
₹ 12/PieceGet Latest Price
Minimum Order Quantity: 3000 Piece
| Voltage | 36 V |
| Maximum Power Dissipation | 90 W |
| Mounting Type | DIP |
| Brand | WXDH |
| Part Number | DH025N03 |
| VOLT | 30V |
| AMPERE | 120A |
| NUMBER OF PINS | 8 |
| Power Dissipation | 104V |
These N-channel enhanced vdmosfets used advanced trench technology design, provided excellent Rdson and low gate charge. Which accords with the RoHS standard. Features:
● Fast switching ● Low on resistance(Rdson≤2.0mΩ) ● Low gate charge(Typ: 65nC) ● Low reverse transfer capacitances(Typ: 435pF) ● 100% single pulse avalanche energy test ● 100% ΔVDS test
Additional Information:
- Delivery Time: 10-15DAYS
- Packaging Details: TO-220C
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Power | 3W |
| Part Number | FZ-5050RGBC350A16 5050 3W RGB SMD LED |
| FORWARD CURRENT | 350 mA |
| Reverse voltage | 5V |
| Operating temperature range | -25~+80 DegreeC |
5050 3W RGB SMD LED
The encapsulated material of the LEDs is silicone. Therefore the LEDs have a soft surface on the top of package. The pressure to the top surface will be influence to the reliability of the LEDs. Precautions should be taken to avoid the strong pressure on the encapsulated part. So when use the picking up nozzle, the pressure on the silicone resin should be proper.
Additional Information:
- Delivery Time: 10-14DAYS
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Number Of Pins | 8 Pin |
| PACKING | TAPE REEL |
| Operating Temperature | -40 ~ + 85 DegreeC |
| Input Voltage | -0.5 ~ 7.0 |
| Supply Voltage | -0.5 ~ 7.0 |
he U74AHC3G04 are high-speed Si-gate CMOS devices providing three inverting buffers with the function FEATURES
* Low Power Dissipation * Symmetrical Output Impedance * Balanced Propagation Delays * High Noise Immunity
Additional Information:
- Delivery Time: 10-15DAYS
- Packaging Details: MSOP-8
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
UCC287502DBVR DBV (SOT23-6) TEXAS INSTRUMENTS
₹ 8/PieceGet Latest Price
Minimum Order Quantity: 3000 Piece
| Pin Count | 16 |
| BODY SIZE | 2.9mm x 1.6mm |
| NUMBER OF PINS | 6 |
| APPLICATION | Major appliance, Small home appliances,Battery pack and charger |
| POWER DELIVERY | Server PSU with 12V output |
UCC28750 is a highly-integrated current-mode, continuous-conduction-capable, PWM controller optimized for high performance, low standby power, and cost effective offline flyback converter applications using an opto-coupler. During light-load conditions the device enters frequency foldback and burst modes, improving light-load efficiency. The burst-mode algorithm used in UCC28750 controls the minimum effective switching frequency to prevent audible noise during light-load conditions. Frequency dithering improves EMI performance, and is active in normal, frequency foldback, and power boost operations. UCC28750 provides protection features that enable a robust converter design with minimal external components. Output over-power protection (OPP) and cycle-by-cycle over-current limit protect the load and power-stage components from electrical stress. Overvoltage and under-voltage lockout (OVLO and UVLO) prevent switching in unwanted input conditions. The FLT pin provides line brown-out sensing and protection, or external over-temperature and overvoltage protection, depending on the device variant. The FLT pin is also used to disable the device through external control by pulling the pin to ground, regardless of the device variant
Additional Information:
- Delivery Time: 10-15 DAYS
- Packaging Details: DBV (SOT23-6)
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
STM32F030R8T6 ARM Microcontroller IC MCU 32BIT 64KB FLASH 64LQFP
₹ 52/PieceGet Latest Price
| Core Size | 32 Bit |
| RAM Size | 8 KB |
| Pin Count | 64 |
| Part Number | STM32F030R8T6 |
| Colour | Black |
The STM32F030x4/x6/x8/xC microcontrollers incorporate the high-performance Arm® Cortex®-M0 32-bit RISC core operating at a 48 MHz frequency, high-speed embedded memories (up to 256 Kbytes of Flash memory and up to 32 Kbytes of SRAM), and an extensive range of enhanced peripherals and I/Os. All devices offer standard communication interfaces (up to two I2Cs, up to two SPIs and up to six USARTs), one 12-bit ADC, seven general-purpose 16-bit timers and an advanced-control PWM timer. The STM32F030x4/x6/x8/xC microcontrollers operate in the -40 to +85 °C temperature range from a 2.4 to 3.6V power supply. A comprehensive set of power-saving modes allows the design of low-power applications. The STM32F030x4/x6/x8/xC microcontrollers include devices in four different packages ranging from 20 pins to 64 pins. Depending on the device chosen, different sets of peripherals are included. The description below provides an overview of the complete range of STM32F030x4/x6/x8/xC peripherals proposed. These features make the STM32F030x4/x6/x8/xC microcontrollers suitable for a wide range of applications such as application control and user interfaces, handheld equipment, A/V receivers and digital TV, PC peripherals, gaming and GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVACs.
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Number Of Pins | 28 Pin |
| Memory Size | 512 Kbit (64K x 8 bits) |
| Access Time | 45 ns to 250 ns |
| Interface Type | Parallel |
| Package Type | DIP-28 (Dual Inline Package, 28 pins) |
5V ± 10% SUPPLY VOLTAGE in READ OPERATION
ACCESS TIME: 45ns
LOW POWER “CMOS” CONSUMPTION:– Active Current 30mA– Standby Current 100µA
PROGRAMMING VOLTAGE: 12.75V ± 0.25V
PROGRAMMING TIMES of AROUND 6sec.
ELECTRONIC SIGNATURE– Manufacturer Code: 20h– Device Code: 3Dh
PACKAGES– Lead-Free Versions
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Number Of Pins | 20 Pin |
| Device Type | Octal Bus Transceiver (Bi-directional) |
| Logic Family | HC (High-speed CMOS) |
| Number of Channels | 8-bit |
| Operating Voltage Range | 2v to 6v |
| Package Type | SOIC-20 (SMD) / TSSOP-20 |
The 74HC245; 74HCT245 is a high-speed Si-gate CMOS device and is pin compatible with Low-Power Schottky TTL (LSTTL). The 74HC245; 74HCT245 is an octal transceiver featuring non-inverting 3-state bus compatible outputs in both send and receive directions. The 74HC245; 74HCT245 features an output enable input (OE) for easy cascading and a send/receive input (DIR) for direction control. OE controls the outputs so that the buses are effectively isolated. The 74HC245; 74HCT245 is similar to the 74HC640; 74HCT640 but has true (non-inverting) outputs.
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Voltage | 15 V |
| Speaker Inbuilt | No |
| Shape | Rectangular |
| Pin Count | 12 |
| Part Number | CD6283CS |
UTC A6283 is an audio power IC with built-in two channels developed for portable radio cassette tape recorder. Because of the parts reduction and sip (Single In line Package), space merit is remarkable. Thermal shut down protection circuit is built in.
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Type | NPN |
| Voltage | 220 V |
| Mounting Type | SMD |
| Model No | HT9200A |
| Frequency | 50Hz |
| Phase | Single |
| Pack Type | Box |
The HT9200A/B tone generators are designed for µC interfaces. They can be instructed by a µC to generate 16 dual tones and 8 single tones from the DTMF pin. The HT9200A provides a serial mode whereas the HT9200B contains a selectable serial/parallel mode interface for various applications such as security systems, home automation, remote control through telephone lines, communication systems, etc.
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Manufacturer | Nexperia |
| Type | PNP Bipolar Junction Transistor |
| Package | SOT-23 (Surface Mount) |
| Collector-Emitter Voltage | 45v |
| Collector Current | 100 mA |
The Nexperia BC857B is a general-purpose PNP transistor designed for low-current and low-voltage applications. It is commonly used in signal amplification and switching circuits.
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Voltage | 30 V |
| Current | 3A |
| Mounting Type | SMD |
| Frequency | 50Hz |
| Phase | Single |
| Pack Type | Box |
The TIP32C is a silicon Epitaxial-base PNP power transistor in Jedec TO-220 plastic package. It is intented for use in medium power linear and switching applications. The complementary NPN type is TIP31C.
Additional Information:
- Packaging Details: TO-220
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Number Of Pins | 8 Pin |
| Device Type | High-Performance Operational Amplifier |
| Package Type | SOIC-8 (Small Outline Integrated Circuit, 8 pins) |
| Gain Bandwidth Product | 10 MHz |
| Input Offset Voltage | Max 3 mV |
The MC33078/9 series is a family of high quality monolithic amplifiers employing Bipolar technology with innovative high performance concepts for quality audio and data signal processing applications. This family incorporates the use of high frequency PNP input transistors to produce amplifiers exhibiting low input voltage noise with high gain bandwidth product and slew rate. The all NPN output stage exhibits no deadband crossover distortion, large output voltage swing, excellent phase and gain margins, low open loop high frequency output impedance and symmetrical source and sink AC frequency performance.
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Power | 1.5 kW |
| Mounting Type | Through-Hole |
| Package Type | DO-15 |
| Stand-off Voltage | 27 Volts |
| Breakdown Voltage | 30.3v to 33.6v |
• Underwriters Laboratory Recognition under UL standard for safety 497B: Isolated Loop Circuit Protection • Glass passivated junction • 1500W peak pulse power capabililty on 10/1000µs waveform, repetition rate (duty cycle): 0.05% • Excellent clamping capability • Low incremental surge resistance • Very fast response time • Includes 1N6267 thru 1N6303A
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
SG3524N Texas Instruments IC REG CTRLR MULT TOPOLOGY 16DIP
₹ 16/PieceGet Latest Price
Minimum Order Quantity: 25 Piece
| Number Of Pins | 16 PIN |
| IC Type | PWM Controller |
| Package Type | DIP-16 (Dual In-line Package, 16 pins) |
| Operating Voltage | 8v to 35v |
| Output Current | 200mA (max) |
| Frequency Range | 100 Hz to 300 kHz |
This monolithic integrated circuit contains all the control circuitry for a regulating power supply inverter or switching regulator. Included in a 16-pin dual-in-line package is the voltage reference, error amplifier, oscillator, pulse width modulator, pulse steering flip-flop, dual alternating output switches, and current-limiting and shutdown circuitry. This device can be used for switching regulators of either polarity, transformer coupled DC to DC converters, transformer-less voltage doublers, and polarity converters, as well as other power applications. The SG1524 is specified for operation over the full military ambient temperature range of –55 °C to +125 °C, the SG2524 for –25 °C to +85 °C, and the SG3524 is designed for commercial applications of 0 °C to +70 °C.
Additional Information:
- Delivery Time: 10-14DAYS
- Packaging Details: 16DIP
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Number Of Pins | 18 Pin |
| Device Type | DTMF (Dual-Tone Multi-Frequency) Receiver |
| Package Type | DIP-18 (Dual In-line Package, 18 pins) |
| Operating Voltage | 4.75v to 5.25v |
| Input Frequency Range | 697 Hz to 1633 Hz |
| Output Format | 4-bit digital code |
The MT8870D/MT8870D-1 is a complete DTMF receiver integrating both the bandsplit filter and digital decoder functions. The filter section uses switched capacitor techniques for high and low group filters; the decoder uses digital counting techniques to detect and decode all 16 DTMF tonepairs into a 4-bit code. External component count is minimized by on chip provision of a differential input amplifier, clock oscillator and latched three-state bus interface
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Number Of Pins | 16 pins |
| Device Type | Class-D Audio Amplifier IC |
| Package Type | SOP-16 (Small Outline Package, 16 pins) |
| Output Power | 3W per channel |
| Supply Voltage | 2.5v to 5.5v |
The PAM8403 is a 3W, class-D audio amplifier. It offers low THD+N, allowing it to achieve high-quality sound reproduction. The new filterless architecture allows the device to drive the speaker directly, requiring no low-pass output filters, thus saving system cost and PCB area. With the same numbers of external components, the efficiency of the PAM8403 is much better than that of Class-AB cousins. It can extend the battery life, which makes it well-suited for portable applications. The PAM8403 is available in SOP-16 package
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Pin Count | 8 |
| Input Offset Voltage | 3 mV |
| Input Bias Current | 65 pA |
| Gain Bandwidth Product | 3 MHz |
| Mounting Type | Surface-Mount |
| Package Type | SOIC-8 |
The TL082, TL082A and TL082B are high speed JFET input dual operational amplifiers incorporating well-matched, high voltage JFET and bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates, low input bias and offset current, and low offset voltage temperature coefficient.
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Number Of Pins | 18 Pin |
| PINS | 16 |
| BRAND | HONG LIFA ELECTRONICS |
| SUPPLY VOLTAGE | 40V |
| OUTPUT CURRENT | 500mA |
The UC1846/7 family of control ICs provides all of the necessary features to implement fixed frequency, current mode control schemes while maintaining a minimum external parts count. The superior performance of this technique can be measured in improved line regulation, enhanced load response characteristics, and a simpler, easier-to-design control loop. Topological advantages include inherent pulse-by-pulse current limiting capability, automatic symmetry correction for pusn-pull converters, and the ability to parallel "power modules" while maintaining equal current sharing.Protection dircuitry includes built in under-voltage lockout and programmable current limit in addition to soft start capability. A shutdown function is also available which can initiate either a complete shutdown with automatic restart or latch the supply off.Other features include fully latched operation, double pulse sup--pression, deadline adjust capability, and a $1% trimmed bandgap reference.The UC1846 features low outputs in the OFF state, while the UC1847 features high outputs in the OFF state.
Additional Information:
- Delivery Time: 10-15 DAYS
- Packaging Details: DIP
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Number Of Pins | 4 Pin |
| VOLTAGE SUPPLY | 3.0V ~24 V |
| BRAND | Nanjing AH Electronic Science & Technology Co., Ltd |
| TYPE | 100% LEAD FREE |
| OPERATING CURRENT | 3.5 mA |
AH2526 is a dual-channel Hall effect switch IC, much suitable for speed and direction sensing applications， including encoding ring magnet target. AH2526 provides various output signals, indicates the speed and direction of target rotation. Hall elements are photo-lithographically lithography aligned, the result is better than 1um. Maintaining precise displacement between two active Hall elements eliminates a major manufacturing obstacle in fine pitch detection applications. The AH2526 is a sensitive magnetic device, ideally suitable for using in harsh automotive and industrial environments. The distance between AH2526’s Hall elements is 1.4mm, and work with the proper ring magnets to provide speed and direction information. A low-drift amplifier ensures symmetry between the switches to maintain signal quadrature. An on-chip voltage regulator allows the device to be used over a wide operating voltage range of 3.0 to 24V. The AH2526 is available in 4-pin SIP and 8-pin SOIC plastic packages. Both packages are 100% lead-free, matte tinned lead.
Application:
Magnetic encoding Spindle monitoring Garage door Motorized sliding door Sunroof motor
Features and Benefits :
Direction of logic output signals .Precisely aligned double Hall elements Logic output signal quadrature A/B output Excellent temperature stability Stabled topology with advanced Chopper High sensitivity (BOP & BRP) Support wide voltage range: 3.0 - 24 V Small package size
Additional Information:
- Delivery Time: 10-15 DAYS
- Packaging Details: 4-PIN SIP
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
ISL83202IBZT SOIC-16 MOSFET DRIVER-RENESAS
₹ 90/PieceGet Latest Price
Minimum Order Quantity: 2500 Piece
| Number Of Pins | 14 Pin |
| PINS | 16 |
| VOLTAGE | 55V |
| AMPERE | 1A |
| BRAND | RENESAS |
The ISL83202 is a medium-frequency H-Bridge FET driver capable of 1A (typ) of peak drive current that is designed Save and Continueto drive high- and low-side N-Channel MOSFETs in mediumvoltage applications. Optimized for PWM motor control and uninterruptible power supply systems, the ISL83202 enables simple and flexible bridge-based design. With typical inputto-output propagation delays as low as 25ns and with a userprogrammable dead-time range of 0.1µs to 4.5µs, the ISL83202 is ideal for switching frequencies up to 200kHz. The dead-time of the ISL83202 is programmable via a single resistor. The ISL83202's four independent driver control inputs (ALI, AHI, BLI, and BHI) allow driving of every possible switch combination except those that would cause a shoot-through condition. A global disable input, DIS, overrides input control and causes the ISL83202 to refresh the bootstrap capacitor when pulled low. Integrated undervoltage protection and shoot-through protection ensure reliable system operation. The ISL83202 is available in compact 16 Ld SOIC and 16 Ld PDIP packages and operates over the range of -55°C to +125°C.
Additional Information:
- Delivery Time: 10-14 DAYS
- Packaging Details: SOIC-16
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Number Of Pins | 28 Pin |
| PINS | 24 |
| BRAND | TEXAS INSTRUMENTS |
| Output voltage | 30V |
| Output voltage | 15V |
The TPS65150 device offers a very compact and small power supply solution that provides all three voltages required by thin film transistor (TFT) LCD displays. With an input voltage range of 1.8 V to 6 V the device is ideal for notebooks powered by a 2.5-V or 3.3-V input rail or monitor applications with a 5-V input voltage rail. Additionally the TPS65150 device provides an integrated high current buffer to provide the VCOM voltage for the TFT backplane. Two regulated adjustable charge pump driver provide the positive V(VGH) and negative V(VGL) bias voltages for the TFT. The device incorporates adjustable power-on sequencing for V(VGL) as well as for V(VGH). This avoids any additional external components to implement application specific sequencing. The device has an integrated high-voltage switch to isolate V(VGH). The same internal circuit can also be used to provide a gate shaping signal of V(VGH) for the LCD panel controlled by the signal applied to the CTRL input. For highest safety, the TPS65150 device has an integrated adjustable shutdown latch feature, which allows application-specific flexibility. The device monitors the outputs (V(VS), V(VGL), V(VGH)); and, as soon as one of the outputs falls below its power good threshold, the device enters shutdown latch, after its adjustable delay time has passed by.
Additional Information:
- Delivery Time: 10-15DAYS
- Packaging Details: HTSSOP
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
| Number Of Pins | 8 Pin |
| Receiver Input Voltage (A, B) | -8V to +12.5V |
| Driver Output Voltage (A, B). | -8V to +12.5V |
| Driver Input Voltage (DI) | -0.5V to (VCC + 0.5V) |
| BRAND | ANALOG DEVICES |
The MAX481, MAX483, MAX485, MAX487–MAX491, and MAX1487 are low-power transceivers for RS-485 and RS422 communication. Each part contains one driver and one receiver. The MAX483, MAX487, MAX488, and MAX489 feature reduced slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, thus allowing error-free data transmission up to 250kbps. The driver slew rates of the MAX481, MAX485, MAX490, MAX491, and MAX1487 are not limited, allowing them to transmit up to 2.5Mbps. These transceivers draw between 120µA and 500µA of supply current when unloaded or fully loaded with disabled drivers. Additionally, the MAX481, MAX483, and MAX487 have a low-current shutdown mode in which they consume only 0.1µA. All parts operate from a single 5V supply. Drivers are short-circuit current limited and are protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high-impedance state. The receiver input has a fail-safe feature that guarantees a logic-high output if the input is open circuit. The MAX487 and MAX1487 feature quarter-unit-load receiver input impedance, allowing up to 128 MAX487/ MAX1487 transceivers on the bus. Full-duplex communications are obtained using the MAX488–MAX491, while the MAX481, MAX483, MAX485, MAX487, and MAX1487 are designed for half-duplex applications.
Additional Information:
- Delivery Time: 10-15days
View Complete Details
Yes, I am interested!
View More Products
All Rights Reserved (Terms of Use)
- Developed and Managed by IndiaMART InterMESH Limited
