X
View Mobile Number
Send Email
Hi
I agree to the terms and privacy policy
Verifying...
1

Have a requirement?
Get Best Price

Products & Services

+View All

Bose Powermatch Amplifiers

We are a leading Manufacturer of Bose Powermatch PM8500 Power Amplifier, PowerMatch PM8250 Power Amplifier, Bose PowerMatch PM4500 Power Amplifier, Bose PowerMatch PM4250N Power Amplifier, Bose PowerMatch PM4250 Power Amplifier and PowerMatch PM8250N Power Amplifier from Delhi, India.

  • Bose Powermatch PM8500 Power Amplifier
  • Bose Powermatch PM8500 Power Amplifier
  • Bose Powermatch PM8500 Power Amplifier
  • Bose Powermatch PM8500 Power Amplifier
  • Bose Powermatch PM8500 Power Amplifier
  • Bose Powermatch PM8500 Power Amplifier
  • Bose Powermatch PM8500 Power Amplifier
  • Bose Powermatch PM8500 Power Amplifier
  • Bose Powermatch PM8500 Power Amplifier
  • Bose Powermatch PM8500 Power Amplifier
  • Bose Powermatch PM8500 Power Amplifier
  • Bose Powermatch PM8500 Power Amplifier
  • Bose Powermatch PM8500 Power Amplifier
Bose Powermatch PM8500 Power Amplifier
Interested in this product?
Get Best Quote
Product Code343547-1110
BrandBose Powermatch
ModelPowerMatch PM8500 / PM8500N power amplifier
Maximum Rated Power4000 W (500 W x 8 channels at 4 ohms)
Output Channels2 to 8 (configurable)
Input Channels8 (balanced line level)

Features :
  • QuadBridge™ Technology – Allows each 4-channel loudspeaker block to be configured as Mono, V-Bridge, I-Share or Quad modes, allowing the total available power of the amplifier block to be allocated to one or more output channels. The amplifier is capable of driving both low impedance and 70/100V loudspeaker loads directly.

  • Bose® ControlSpace® Designer™ software – PowerMatch amplifiers can be fully configured using ControlSpace Designer software via the onboard front panel USB connection, or the rear panel Ethernet connection (network models only). Using ControlSpace Designer software you can access additional features including: Parametric EQ stages, load sweep of each output channel and auto standby. ControlSpace Designer software is also used to integrate network model PowerMatch amplifiers into larger control and monitoring systems comprised of Bose ESP processors and CC control centers.
  • Auto-Standby/Auto-Wake function – When enabled, this function automatically enters/exits Standby Mode, allowing the system to consume less power.

  • Dual voltage and current feedback loop – Proprietary design combines Class-D efficiency with a unique current and voltage feedback loop circuit that continuously monitors and controls both the current and voltage delivered to the loudspeaker load. Independent of power level and load impedance, the amplifier consistently delivers the widest possible dynamic range, frequency response and lowest possible distortion.

  • PeakBank™ power supply – Regenerative 4-quadrant power supply enables higher power density while allowing the re-use of energy from reactive loads that is normally wasted in conventional Class-D designs. This highly efficient amplifier design delivers sustainable and repeatable low frequency response.

    Fast-tracking power factor correction (PFC) – Efficiently manages the current drawn from the AC mains, allowing the amplifier to drive loudspeakers to maximum output longer without power fluctuation. PFC provides superior transient response and functions at peak burst power much longer than conventional Class-D amplifier designs to satisfy the requirements of even the most demanding program material.

  • Auditoriums
  • Performing arts venues
  • Theaters
  • Houses of worship
  • Arenas
  • Hospitality venues

View Complete Details

Yes, I am interested!

  • PowerMatch PM8250 Power Amplifier
  • PowerMatch PM8250 Power Amplifier
  • PowerMatch PM8250 Power Amplifier
  • PowerMatch PM8250 Power Amplifier
  • PowerMatch PM8250 Power Amplifier
  • PowerMatch PM8250 Power Amplifier
  • PowerMatch PM8250 Power Amplifier
  • PowerMatch PM8250 Power Amplifier
  • PowerMatch PM8250 Power Amplifier
  • PowerMatch PM8250 Power Amplifier
  • PowerMatch PM8250 Power Amplifier
  • PowerMatch PM8250 Power Amplifier
  • PowerMatch PM8250 Power Amplifier
  • PowerMatch PM8250 Power Amplifier
PowerMatch PM8250 Power Amplifier
Interested in this product?
Get Best Quote

PowerMatch PM8250 Power Amplifier

Get Latest Price

Watch Video

Product Code361811-1110
BrandBose Powermatch
ModelPowerMatch PM8250 / PM8250N power amplifier
Maximum Rated Power2000 W (250 W x 8 channels at 4 ohms)
Output Channels2 to 8 (configurable)
Input Channels8 (balanced line level)

Features
  • QuadBridge(TM) Technology - Allows each 4-channel loudspeaker block to be configured as Mono, V-Bridge, I-Share or Quad modes, allowing the total available power of the amplifier block to be allocated to one or more output channels. The amplifier is capable of driving both low impedance and 70/100V loudspeaker loads directly.

  • Bose ControlSpace Designer(TM) software - PowerMatch amplifiers can be fully configured using ControlSpace Designer software via the onboard front panel USB connection, or the rear panel Ethernet connection (network models only). Using ControlSpace Designer software you can access additional features including Parametric EQ stages, load sweep of each output channel and auto standby. ControlSpace Designer software is also used to integrate network model PowerMatch amplifiers into larger control and monitoring systems comprised of Bose ESP processors and CC control centers.

  • Auto-Standby/Auto-Wake function - When enabled, this function automatically enters/exits Standby Mode, allowing the system to consume less power.

  • Dual voltage and current feedback loop - Proprietary design combines Class-D efficiency with a unique current and voltage feedback loop circuit that continuously monitors and controls both the current and voltage delivered to the loudspeaker load. Independent of power level and load impedance, the amplifier consistently delivers the widest possible dynamic range, frequency response and lowest possible distortion.

  • PeakBank(TM) power supply - Regenerative 4-quadrant power supply enables higher power density while allowing the re-use of energy from reactive loads that is normally wasted in conventional Class-D designs. This highly efficient amplifier design delivers sustainable and repeatable low frequency response.

  • Fast-tracking power factor correction (PFC) - Efficiently manages the current drawn from the AC mains, allowing the amplifier to drive loudspeakers to maximum output longer without power fluctuation. PFC provides superior transient response and functions at peak burst power much longer than conventional Class-D amplifier designs to satisfy the requirements of even the most demanding program material.

  • Houses of worship
  • Retail stores
  • Atriums and malls
  • Restaurants
  • Auxiliary zones
  • Conference centers
  • Hospitality venues

View Complete Details

Yes, I am interested!

  • Bose PowerMatch PM4500  Power Amplifier
  • Bose PowerMatch PM4500  Power Amplifier
  • Bose PowerMatch PM4500  Power Amplifier
  • Bose PowerMatch PM4500  Power Amplifier
  • Bose PowerMatch PM4500  Power Amplifier
  • Bose PowerMatch PM4500  Power Amplifier
  • Bose PowerMatch PM4500  Power Amplifier
  • Bose PowerMatch PM4500  Power Amplifier
  • Bose PowerMatch PM4500  Power Amplifier
  • Bose PowerMatch PM4500  Power Amplifier
  • Bose PowerMatch PM4500  Power Amplifier
  • Bose PowerMatch PM4500  Power Amplifier
  • Bose PowerMatch PM4500  Power Amplifier
Bose PowerMatch PM4500  Power Amplifier
Interested in this product?
Get Best Quote
Product Code361814-1110
BrandBose Powermatch
ModelPowerMatch PM4500 power amplifier
Maximum Rated Power2000 W (500 W x 4 channels at 4 ohms)
Output Channels1 to 4 (configurable)
Input Channels8 (balanced line level)

Features :
  • QuadBridge™ Technology – Allows the 4 available channels to be configured as Mono, V-Bridge, I-Share or Quad mode, allowing the total available power of the amplifier to be allocated to one or more output channels. The amplifier is capable of driving both low impedance and 70/100V loudspeaker loads directly.
  • Bose® ControlSpace® Designer™ software – PowerMatch amplifiers can be fully configured using ControlSpace Designer software via the onboard front panel USB connection, or the rear panel Ethernet connection (network models only). Using ControlSpace Designer software you can access additional features including: Parametric EQ stages, load sweep of each output channel and auto standby. ControlSpace Designer software is also used to integrate network model PowerMatch amplifiers into larger control and monitoring systems comprised of Bose ESP processors and CC control centers.
  • Auto-Standby/Auto-Wake function – When enabled, this function automatically enters/exits Standby Mode, allowing the system to consume less power.
  • Dual voltage and current feedback loop – Proprietary design combines Class-D efficiency with a unique current and voltage feedback loop circuit that continuously monitors and controls both the current and voltage delivered to the loudspeaker load. Independent of power level and load impedance, the amplifier consistently delivers the widest possible dynamic range, frequency response and lowest possible distortion.
  • PeakBank™ power supply – Regenerative 4-quadrant power supply enables higher power density while allowing the re-use of energy from reactive loads that is normally wasted in conventional Class-D designs. This highly efficient amplifier design delivers sustainable and repeatable low frequency response.
  • Fast-tracking power factor correction (PFC) – Efficiently manages the current drawn from the AC mains, allowing the amplifier to drive loudspeakers to maximum output longer without power fluctuation. PFC provides superior transient response and functions at peak burst power much longer than conventional Class-D amplifier designs to satisfy the requirements of even the most demanding program material.
  • Auditoriums
  • Performing arts venues
  • Theaters
  • Houses of worship
  • Arenas
  • Hospitality venues

View Complete Details

Yes, I am interested!

  • Bose PowerMatch PM4250N Power Amplifier
  • Bose PowerMatch PM4250N Power Amplifier
  • Bose PowerMatch PM4250N Power Amplifier
  • Bose PowerMatch PM4250N Power Amplifier
  • Bose PowerMatch PM4250N Power Amplifier
  • Bose PowerMatch PM4250N Power Amplifier
  • Bose PowerMatch PM4250N Power Amplifier
  • Bose PowerMatch PM4250N Power Amplifier
  • Bose PowerMatch PM4250N Power Amplifier
  • Bose PowerMatch PM4250N Power Amplifier
  • Bose PowerMatch PM4250N Power Amplifier
  • Bose PowerMatch PM4250N Power Amplifier
Bose PowerMatch PM4250N Power Amplifier
Interested in this product?
Get Best Quote
Product Code361815-1110
BrandBose Powermatch
ModelPowerMatch PM4250N power amplifier
Maximum Rated Power1000 W (250 W x 4 channels at 4 ohms)
Output Channels1 to 4 (configurable)
Input Channels4 (balanced line level)

Features :
  • QuadBridge™ Technology – Allows the 4 available channels to be configured as Mono, V-Bridge, I-Share or Quad mode, allowing the total available power of the amplifier to be allocated to one or more output channels. The amplifier is capable of driving both low impedance and 70/100V loudspeaker loads directly.
  • Bose® ControlSpace® Designer™ software – PowerMatch amplifiers can be fully configured using ControlSpace Designer software via the onboard front panel USB connection, or the rear panel Ethernet connection (network models only). Using ControlSpace Designer software you can access additional features including: Parametric EQ stages, load sweep of each output channel and auto standby. ControlSpace Designer software is also used to integrate network model PowerMatch amplifiers into larger control and monitoring systems comprised of Bose ESP processors and CC control centers.
  • Auto-Standby/Auto-Wake function – When enabled, this function automatically enters/exits Standby Mode, allowing the system to consume less power.
  • Dual voltage and current feedback loop – Proprietary design combines Class-D efficiency with a unique current and voltage feedback loop circuit that continuously monitors and controls both the current and voltage delivered to the loudspeaker load. Independent of power level and load impedance, the amplifier consistently delivers the widest possible dynamic range, frequency response and lowest possible distortion.
  • PeakBank™ power supply – Regenerative 4-quadrant power supply enables higher power density while allowing the re-use of energy from reactive loads that is normally wasted in conventional Class-D designs. This highly efficient amplifier design delivers sustainable and repeatable low frequency response.
  • Fast-tracking power factor correction (PFC) – Efficiently manages the current drawn from the AC mains, allowing the amplifier to drive loudspeakers to maximum output longer without power fluctuation. PFC provides superior transient response and functions at peak burst power much longer than conventional Class-D amplifier designs to satisfy the requirements of even the most demanding program material.
  • Houses of worship
  • Retail stores
  • Atriums and malls
  • Restaurants
  • Auxiliary zones
  • Conference centers
  • Hospitality venues

View Complete Details

Yes, I am interested!

  • Bose PowerMatch PM4250 Power Amplifier
  • Bose PowerMatch PM4250 Power Amplifier
  • Bose PowerMatch PM4250 Power Amplifier
  • Bose PowerMatch PM4250 Power Amplifier
  • Bose PowerMatch PM4250 Power Amplifier
  • Bose PowerMatch PM4250 Power Amplifier
  • Bose PowerMatch PM4250 Power Amplifier
  • Bose PowerMatch PM4250 Power Amplifier
  • Bose PowerMatch PM4250 Power Amplifier
  • Bose PowerMatch PM4250 Power Amplifier
  • Bose PowerMatch PM4250 Power Amplifier
  • Bose PowerMatch PM4250 Power Amplifier
  • Bose PowerMatch PM4250 Power Amplifier
Bose PowerMatch PM4250 Power Amplifier
Interested in this product?
Get Best Quote
Product Code361816-1110
BrandBose Powermatch
ModelPowerMatch PM4250 power amplifier
Maximum Rated Power1000 W (250 W x 4 channels at 4 ohms)
Output Channels1 to 4 (configurable)
Input Channels4 (balanced line level)

Features :
  • QuadBridge™ Technology – Allows the 4 available channels to be configured as Mono, V-Bridge, I-Share or Quad mode, allowing the total available power of the amplifier to be allocated to one or more output channels. The amplifier is capable of driving both low impedance and 70/100V loudspeaker loads directly.
  • Bose® ControlSpace® Designer™ software – PowerMatch amplifiers can be fully configured using ControlSpace Designer software via the onboard front panel USB connection, or the rear panel Ethernet connection (network models only). Using ControlSpace Designer software you can access additional features including: Parametric EQ stages, load sweep of each output channel and auto standby. ControlSpace Designer software is also used to integrate network model PowerMatch amplifiers into larger control and monitoring systems comprised of Bose ESP processors and CC control centers.
  • Auto-Standby/Auto-Wake function – When enabled, this function automatically enters/exits Standby Mode, allowing the system to consume less power.
  • Dual voltage and current feedback loop – Proprietary design combines Class-D efficiency with a unique current and voltage feedback loop circuit that continuously monitors and controls both the current and voltage delivered to the loudspeaker load. Independent of power level and load impedance, the amplifier consistently delivers the widest possible dynamic range, frequency response and lowest possible distortion.
  • PeakBank™ power supply – Regenerative 4-quadrant power supply enables higher power density while allowing the re-use of energy from reactive loads that is normally wasted in conventional Class-D designs. This highly efficient amplifier design delivers sustainable and repeatable low frequency response.
  • Fast-tracking power factor correction (PFC) – Efficiently manages the current drawn from the AC mains, allowing the amplifier to drive loudspeakers to maximum output longer without power fluctuation. PFC provides superior transient response and functions at peak burst power much longer than conventional Class-D amplifier designs to satisfy the requirements of even the most demanding program material.
  • Houses of worship
  • Retail stores
  • Atriums and malls
  • Restaurants
  • Auxiliary zones
  • Conference centers
  • Hospitality venues

View Complete Details

Yes, I am interested!

  • PowerMatch  PM8250N Power Amplifier
  • PowerMatch  PM8250N Power Amplifier
  • PowerMatch  PM8250N Power Amplifier
  • PowerMatch  PM8250N Power Amplifier
  • PowerMatch  PM8250N Power Amplifier
  • PowerMatch  PM8250N Power Amplifier
  • PowerMatch  PM8250N Power Amplifier
  • PowerMatch  PM8250N Power Amplifier
  • PowerMatch  PM8250N Power Amplifier
  • PowerMatch  PM8250N Power Amplifier
  • PowerMatch  PM8250N Power Amplifier
  • PowerMatch  PM8250N Power Amplifier
PowerMatch  PM8250N Power Amplifier
Interested in this product?
Get Best Quote
Product Code361810-1110
BrandBose Powermatch
ModelPowerMatch PM8250N power amplifier
Maximum Rated Power2000 W (250 W x 8 channels at 4 ohms)
Output Channels2 to 8 (configurable)
Input Channels8 (balanced line level)

Features :
  • QuadBridge™ Technology – Allows the 4 available channels to be configured as Mono, V-Bridge, I-Share or Quad mode, allowing the total available power of the amplifier to be allocated to one or more output channels. The amplifier is capable of driving both low impedance and 70/100V loudspeaker loads directly.
  • Bose® ControlSpace® Designer™ software – PowerMatch amplifiers can be fully configured using ControlSpace Designer software via the onboard front panel USB connection, or the rear panel Ethernet connection (network models only). Using ControlSpace Designer software you can access additional features including: Parametric EQ stages, load sweep of each output channel and auto standby. ControlSpace Designer software is also used to integrate network model PowerMatch amplifiers into larger control and monitoring systems comprised of Bose ESP processors and CC control centers.
  • Auto-Standby/Auto-Wake function – When enabled, this function automatically enters/exits Standby Mode, allowing the system to consume less power.
  • Dual voltage and current feedback loop – Proprietary design combines Class-D efficiency with a unique current and voltage feedback loop circuit that continuously monitors and controls both the current and voltage delivered to the loudspeaker load. Independent of power level and load impedance, the amplifier consistently delivers the widest possible dynamic range, frequency response and lowest possible distortion.
  • PeakBank™ power supply – Regenerative 4-quadrant power supply enables higher power density while allowing the re-use of energy from reactive loads that is normally wasted in conventional Class-D designs. This highly efficient amplifier design delivers sustainable and repeatable low frequency response.
  • Fast-tracking power factor correction (PFC) – Efficiently manages the current drawn from the AC mains, allowing the amplifier to drive loudspeakers to maximum output longer without power fluctuation. PFC provides superior transient response and functions at peak burst power much longer than conventional Class-D amplifier designs to satisfy the requirements of even the most demanding program material.
  • Houses of worship
  • Retail stores
  • Atriums and malls
  • Restaurants
  • Auxiliary zones
  • Conference centers
  • Hospitality venues

View Complete Details

Yes, I am interested!

  • Bose ControlSpace ESP-00 Series II Amplifier
  • Bose ControlSpace ESP-00 Series II Amplifier
  • Bose ControlSpace ESP-00 Series II Amplifier
  • Bose ControlSpace ESP-00 Series II Amplifier
  • Bose ControlSpace ESP-00 Series II Amplifier
  • Bose ControlSpace ESP-00 Series II Amplifier
  • Bose ControlSpace ESP-00 Series II Amplifier
  • Bose ControlSpace ESP-00 Series II Amplifier
Bose ControlSpace ESP-00 Series II Amplifier
Interested in this product?
Get Best Quote
BrandBose
ModelControlSpace ESP-00 Series II
Delay43 s
Audio Latency860 Microsecond (analog in to analog out)
A/D and D/A Converters4-bit
Sample Rate .48 kHz
Connectors3.81 mm Phoenix Contact, 6-pi
Input Impedance12 k Omega @ 1 kHz (with or without phantom power active)
Maximum Input Level+24 dBu
Equivalent Input NoiseLess then to Equal 119 dBu (22 - 20 kHz, 150 Omega input, 64 dB gain)
Phantom Power+48 VDC, 10 mA, selectable per input
Gain settings0/14/24/32/44/54/64 db
Signal ProcessorFour 32-bit floating-point digital signal processors 200 MHz
Expansion Slots8 analog digital audio 2 GPIO (1 occupied)
Audio Channel Capacity64 (bi-directional, digital and/or analog)
PC Configuration SoftwareControlSpace Designer software
Product Code370610-1120
S ignal Processor32-bit fixed/floating-point DSP +ARM, 456 MHz
Maximum Calculation3.6 GIPS / 2.7 GFLOPS

Features
  • Flexible I/O through a customizable card-frame design. With a powerful DSP core, the ESP-00 Series II processor accommodates up to 64 channels of audio over 8 open card slots, and general purpose I/O (GPIO) expansion up to 16 control inputs and 16 control outputs
  • High-quality open-architecture DSP supports 48 kHz sample rate/24-bit conversion, uses a floating-point DSP and operates at low latencies for sound system precision
  • I/O expansion cards cover a number of audio channel requirements from mic/line analog to Dante(TM) networking. These cards offer different audio options to populate the 8 open card slots
  • Support for popular network protocols - Allowing integrators more flexibility in selection, the ControlSpace ESP-00 II processor supports popular audio networking protocols Dante(TM) and CobraNet for interconnection with other products and audio systems
  • A large suite of signal processing algorithms is available. These include automatic mic mixing, multiband graphic and parametric EQs, Bose loudspeaker libraries, signal generators, routers, mixers, AGC's, duckers, gates, compressors, source selectors and delays
  • A variety of control options. The ControlSpace ESP-00 II processor is compatible with five user control interface options and can integrate with industry-standard control systems using a comprehensive serial prtocol through onboard RS-232 and Ethernet ports
  • ControlSpace Designer(TM) software is used to configure both the signal processing and control capabilities of ControlSpace ESP processors. With ControlSpace Designer(TM) software it is possible to design, configure, control and monitor all Bose networked system electronics from a single software application
  • Auditoriums
  • Houses of worship
  • Resorts and hospitality venues
  • Retail stores
  • Schools and universities
  • Multi-purpose spaces

View Complete Details

Yes, I am interested!

  • Bose ControlSpace ESP-880 Amplifier
  • Bose ControlSpace ESP-880 Amplifier
  • Bose ControlSpace ESP-880 Amplifier
  • Bose ControlSpace ESP-880 Amplifier
  • Bose ControlSpace ESP-880 Amplifier
  • Bose ControlSpace ESP-880 Amplifier
  • Bose ControlSpace ESP-880 Amplifier
Bose ControlSpace ESP-880 Amplifier
Interested in this product?
Get Best Quote
BrandBose
ModelControlSpace ESP-880
Audio Latency860 Microsecond (analog in to analog out)
A/D and D/A Converters4-bit
Sample Rate48 kHz
Input Channels8 analog (balanced, mic line level), 16 digital (via option card)
Connectors3.81 mm Phoenix Contact 6-pi
Input Impedance12 k Omega@ 1 kHz (with or without phantom power active)
Maximum Input Level+24 dBu
Equivalent Input NoiseLess then to Equal 119 dBu (22 - 20 kHz, 150 Omega input, 64 dB gain)
Phantom Power+48 VDC, 10 mA, selectable per input
Gain settings0/14/24/32/44/54/64 db
Signal Processor32-bit fixed floating-point DSP+ARM 456 MHz
Output Channels8 analog (balanced, line level), 8 ESPLink, 16 digital (via optional card))
Dynamic RangeGreater than115 dB A-weighted 20 Hz - 20 kHz, analog through
PC Configuration SoftwareControlSpace Designer software
Product Code359868-1120
S ignal Processor32-bit fixed/floating-point DSP+ARM, 456 MHz
Maximum Calculation3.6 GIPS / 2.7 GFLOPS
Delay43 s

Features
  • High-quality analog circuitry offers both mic and line-level I/O, operates with ultra-low noise and 115 dB dynamic range
  • Advanced digital signal processing supports audio at 48 kHz sample rate/24-bit, uses a floating-point open architecture DSP and operates at low latencies for sound system precision
  • Expansion card slot supports the use of accessory networking cards, allowing digital audio to be sent and/or received from other compatible products
  • Optional Dante(TM) network cards allow ESP processors to closely integrate with other product supporting Audinate's Dante audio networking solution
  • Bose ControlSpace Designer(TM) software enables a large set of signal processing modules, such as automatic mic mixing, multiband graphic and parametric EQs, Bose loudspeaker libraries, signal generators, routers, mixers, AGCs, duckers, gates, compressors, source selectors and delays
  • Front panel RJ-45 Ethernet connection enables localized configuration and monitoring, while enabling network passthrough when using a rear-panel network option card
  • Built-in Bose ESPLink output sends up to 8 channels of uncompressed digital audio to ESPLink-equipped Bose PowerMatch amplifiers
  • A variety of control options - ControlSpace ESP products are compatible with the programmable Bose CC-64 and CC-16 controllers and three simplified zone volume interfaces, as well as potentiometers and switches built by other manufacturers
  • Integration with industry-standard control systems using a comprehensive serial protocol through onboard RS-232 and Ethernet ports
  • Auditoriums
  • Houses of worship
  • Resorts and hospitality venues
  • Retail stores
  • Schools and universities
  • Multi-purpose spaces

View Complete Details

Yes, I am interested!

  • Bose ControlSpace ESP-1240 Amplifier
  • Bose ControlSpace ESP-1240 Amplifier
  • Bose ControlSpace ESP-1240 Amplifier
  • Bose ControlSpace ESP-1240 Amplifier
Bose ControlSpace ESP-1240 Amplifier
Interested in this product?
Get Best Quote
BrandBose
Signal Processor32-bit fixed floating-point DSP + ARM 456 MH
A/D and D/A Converters4-bit
Sample Rate48 kHz
Input Channels12 analog (balanced, mic/line level), 16 digital (via option card)
Connectors3.81 mm Phoenix Contact 6-pi
Input Impedance12 k Omega @ 1 kHz (with or without phantom power active)
Maximum Input Level+24 dBu
Equivalent Input NoiseLess then to Equal 119 dBu (22 - 20 kHz, 150 Omega input, 64 dB gain)
Phantom Power+48 VDC, 10 mA, selectable per input
Gain settings0/14/24/32/44/54/64 db
Output Channels4 analog (balanced, line level), 8 ESPLink, 16 digital (via optional card)
Dynamic RangeGearter then 115 dB, A-weighted 20 Hz-20 kHz, analog through
PC Configuration SoftwareControlSpace Designer software
Product Code359869-1120
S ignal Processor32-bit fixed/floating-point DSP+ ARM, 456 MHz
Maximum Calculation3.6 GIPS / 2.7 GFLOPS
Delay43 s
Audio Latency860 Microsecond (analog in to analog out)

Features
  • High-quality analog circuitry offers both mic and line-level I/O, operates with ultra-low noise and 115 dB dynamic range
  • Advanced digital signal processing supports audio at 48 kHz sample rate/24-bit, uses a floating-point open architecture DSP and operates at low latencies for sound system precision
  • Expansion card slot supports the use of accessory networking cards, allowing digital audio to be sent and/or received from other compatible products
  • Optional Dante(TM) media networking card allows single rack-space ESP products to closely integrate with Bose or other manufacturers' products and systems
  • Bose ControlSpace Designer(TM) software enables a large set of signal processing modules, such as automatic mic mixing, multiband graphic and parametric EQs, Bose loudspeaker libraries, signal generators, routers, mixers, AGCs, duckers, gates, compressors, source selectors and delays
  • Front panel RJ-45 Ethernet connection enables localized configuration and monitoring, while enabling network passthrough when using a rear-panel network option card
  • Built-in Bose ESPLink output sends up to 8 channels of uncompressed digital audio to ESPLink-equipped Bose PowerMatch amplifiers
  • A variety of control options - ControlSpace ESP products are compatible with the programmable Bose CC-64 and CC-16 controllers and three simplified zone volume interfaces, as well as potentiometers and switches built by other manufacturers
  • Integration with industry-standard control systems using a comprehensive serial protocol through onboard RS-232 and Ethernet ports
  • Auditoriums
  • Houses of worship
  • Resorts and hospitality venues
  • Retail stores
  • Schools and universities
  • Multi-purpose spaces

View Complete Details

Yes, I am interested!

  • Bose FreeSpace DXA 2120 Amplifier
  • Bose FreeSpace DXA 2120 Amplifier
  • Bose FreeSpace DXA 2120 Amplifier
  • Bose FreeSpace DXA 2120 Amplifier
  • Bose FreeSpace DXA 2120 Amplifier
  • Bose FreeSpace DXA 2120 Amplifier
  • Bose FreeSpace DXA 2120 Amplifier
  • Bose FreeSpace DXA 2120 Amplifier
  • Bose FreeSpace DXA 2120 Amplifier
  • Bose FreeSpace DXA 2120 Amplifier
  • Bose FreeSpace DXA 2120 Amplifier
  • Bose FreeSpace DXA 2120 Amplifier
  • Bose FreeSpace DXA 2120 Amplifier
Bose FreeSpace DXA 2120 Amplifier
Interested in this product?
Get Best Quote
Frequency Response40 Hz - 16 kHz (+0/-3 dB)
BrandBose
Inputs4 balanced(Mic/Line Inputs)
Amplifier Power2 x 120 W at 4 ohms , 2 x 65 W at 8 ohms, or 2 x 100 W at 70/100V
Page Inputs1 balanced
Direct Inputs1 balanced
Connectors, Input Mic/Line Inputs3-pin Euroblock
Connectors, InputLine InputsDual RCA (summed to mono)
Connectors, Input Page Inputs4-pin Euroblock
Input Range Page Input20 Hz - 20 kHz
Signal to Noise Ratio75 dB (below rated power, A-weighted)
Input Impedance Input ImpedanceMic 2 kOmega / Line 25 kOmega
Input Impedance Line Inputs10 kOmega
Input Impedance Page Inputs400 Omega
Input Impedance Direct Inputs18 kOmega
Maximum Input Level Mic/Line InputsMic -20 dBu / Line 10 dBu
Maximum Input Level Line Inputs+10 dBu
Maximum Input Level Page Inputs-30 dBu
Maximum Input Level Direct Inputs+8 dBu
Communication PortRS-232 serial port
Storage Temperature-40 degree F - 158 degree F (-40 degree C - 70 degree C)
THDGearter then to equal 0.5 Percent (at full rated power)
Humidity40 Percent - 90 % relative humidity
Operating Temperature32 degree F - 104 degree F (0 degree C - 40 degree C)
Shipping Weight-40 degree F - 158 degree F (-40 degree C - 70 degree C)
Net Weight32 lb (14.4 kg)
Dimensions3.5
Maximum Input Power150 W
Minimum Input Power50 W
Input Voltage Level+24 V
DC Backup Power/Connector+24 V +-1Percent ) Connector 2-terminal barrier strip24
Overload ProtectionT6.3AL/250 V (100 V and 120 V) or T3.15AL/250 V (220-240 V)
Channel SeparationLess then -60 dBV (below rated power, 1 kHz)
Maximum Inrush Current23.2 A @ 230 V ~ 50 Hz
AC Power ConsumptionIdle: 39 W, Active: 350 W
Mains Voltage100 V version: 100 VAC; 50/60 Hz
LED Status IndicatorsBlue LED: power, Green LED: signal present, Red LED: clip
Maximum Output Level Amplifier Outputs2
Output Impedance Amplifier Outputs5-terminal inverted Euroblock
Nominal Loadc Amplifier Outputs50 Omega @ 70 V, 100 omega @ 100 V
Connectors, Output Amplifier Outputs4 Omega
Outputs Amplifier OutputsN/A
Output Channels2 channels
Dynamic Range80 dB
OutputsAuxiliary Output1
Connectors, Output Auxiliary Output3-pin Euroblock
Nominal Load Auxiliary OutputN/A
Output Impedance Auxiliary Output400 Omega
Maximum Output Level Auxiliary Output2.2 dBV
Equivalent Input Noise Mic/Line InputsN/A
AD and DA Converters24-bit
Sample Rate44.1 kHz
Input Channels6 channels
Line Inputs4 unbalanced

The BoseFreeSpace DXA 2120 digital mixer/amplifier features a 6-in by 2-out design that provides signal processing, mixing, routing, paging and two-channel amplification for installed applications. It offers three versatile
operating modes and is easily configured using the controls on the front panel. No external computer is required The DXA 2120 digital mixer/amplifier can be used in both low- and high-impedance systems. Each of the two output chnnels delivers 120 watts at 4 ohms or 100 watts for 70/100-volt applications. An auxiliary output provides a line- level signal for system expansion.The DXA 2120 digital mixer/amplifier has six inputs - four mic/line inputs, one page input and one direct input that overrides all other sources when a signal is detected. The four mic/line inputs connect to sources via 3-pin Euroblock connectors or dual RCA jacks. Three operating modes provide greater flexibility for installed music or speech applications Mixer Mode - Each input can be routed to every output simultaneously. Volume for each input can be controlled independently, or a master volume can control both outputs simultaneously. Dual Mono Select Mode- Two input sources are available for each output channel. Volume control and source selection are available in each zone. Stereo Select Mode - Two selectable stereo sources can be played in stereo in a single output zone. Volume control and source selection are available in the zone. The auxiliary output can be used with all three modes of operation. Two user interfaces, volume control and volume control with A/B select, are available for operation from remote locations.
Features

  • Six inputs four mic/line inputs with choice of balanced Euroblock or unbalanced RCA connectors, one page input and one direct input

  • Two powered outputs that can operate at high or low impedance 2 x 120 W at 4 ohms , 2 x 65 W at 8 ohms, or 2 x 100 W at 70/100V
  • Three operating modes for greater flexibility in installed music or speech applications Mixer Mode, Dual Mono Select Mode, and Stereo Select Mode

  • Easy setup and control via onboard controls - no computer needed

  • DSP includes loudspeaker EQs and dynamic EQ functions engineered specifically for Bose loudspeakers

  • Opti-voice paging provides a smooth transition between music and announcements

  • 24-volt DC backup power connection for added reliability and integration onto fire and evacuation systems
  • Conference centers
  • Retail stores
  • Restaurants and bars
  • Hotels
  • Lobbies and conference rooms

View Complete Details

Yes, I am interested!

  • Bose  Powermatch  Pm8500n Power Amplifier
  • Bose  Powermatch  Pm8500n Power Amplifier
  • Bose  Powermatch  Pm8500n Power Amplifier
  • Bose  Powermatch  Pm8500n Power Amplifier
  • Bose  Powermatch  Pm8500n Power Amplifier
  • Bose  Powermatch  Pm8500n Power Amplifier
  • Bose  Powermatch  Pm8500n Power Amplifier
  • Bose  Powermatch  Pm8500n Power Amplifier
  • Bose  Powermatch  Pm8500n Power Amplifier
  • Bose  Powermatch  Pm8500n Power Amplifier
  • Bose  Powermatch  Pm8500n Power Amplifier
  • Bose  Powermatch  Pm8500n Power Amplifier
  • Bose  Powermatch  Pm8500n Power Amplifier
Bose  Powermatch  Pm8500n Power Amplifier
Interested in this product?
Get Best Quote
Product Code343546-1110
ModelPM8500N power amplifier
Maximum Rated Power4000 W (500 W x 8 channels at 4 ohms)
Output Channels2 to 8 (configurable)
Input Channels8 (balanced line level)

Features :
  • QuadBridge™ Technology – Allows each 4-channel loudspeaker block to be configured as Mono, V-Bridge, I-Share or Quad modes, allowing the total available power of the amplifier block to be allocated to one or more output channels. The amplifier is capable of driving both low impedance and 70/100V loudspeaker loads directly.

  • Bose® ControlSpace® Designer™ software – PowerMatch amplifiers can be fully configured using ControlSpace Designer software via the onboard front panel USB connection, or the rear panel Ethernet connection (network models only). Using ControlSpace Designer software you can access additional features including: Parametric EQ stages, load sweep of each output channel and auto standby. ControlSpace Designer software is also used to integrate network model PowerMatch amplifiers into larger control and monitoring systems comprised of Bose ESP processors and CC control centers.

  • Auto-Standby/Auto-Wake function – When enabled, this function automatically enters/exits Standby Mode, allowing the system to consume less power.

  • Dual voltage and current feedback loop – Proprietary design combines Class-D efficiency with a unique current and voltage feedback loop circuit that continuously monitors and controls both the current and voltage delivered to the loudspeaker load. Independent of power level and load impedance, the amplifier consistently delivers the widest possible dynamic range, frequency response and lowest possible distortion.

  • PeakBank™ power supply – Regenerative 4-quadrant power supply enables higher power density while allowing the re-use of energy from reactive loads that is normally wasted in conventional Class-D designs. This highly efficient amplifier design delivers sustainable and repeatable low frequency response.

  • Fast-tracking power factor correction (PFC) – Efficiently manages the current drawn from the AC mains, allowing the amplifier to drive loudspeakers to maximum output longer without power fluctuation. PFC provides superior transient response and functions at peak burst power much longer than conventional Class-D amplifier designs to satisfy the requirements of even the most demanding program material.

  • Auditoriums
  • Performing arts venues
  • Theaters
  • Houses of worship
  • Arenas
  • Hospitality venues

View Complete Details

Yes, I am interested!

  • Bose PowerMatch PM4500N Power Amplifier
  • Bose PowerMatch PM4500N Power Amplifier
  • Bose PowerMatch PM4500N Power Amplifier
  • Bose PowerMatch PM4500N Power Amplifier
  • Bose PowerMatch PM4500N Power Amplifier
  • Bose PowerMatch PM4500N Power Amplifier
  • Bose PowerMatch PM4500N Power Amplifier
  • Bose PowerMatch PM4500N Power Amplifier
  • Bose PowerMatch PM4500N Power Amplifier
  • Bose PowerMatch PM4500N Power Amplifier
  • Bose PowerMatch PM4500N Power Amplifier
  • Bose PowerMatch PM4500N Power Amplifier
  • Bose PowerMatch PM4500N Power Amplifier
Bose PowerMatch PM4500N Power Amplifier
Interested in this product?
Get Best Quote
Product Code361813-1110
ModelPowerMatch PM4500N power amplifier
Maximum Rated Power2000 W (500 W x 4 channels at 4 ohms)
Output Channels1 to 4 (configurable)
Input Channels8 (balanced line level)

Features :
  • QuadBridge™ Technology – Allows the 4 available channels to be configured as Mono, V-Bridge, I-Share or Quad mode, allowing the total available power of the amplifier to be allocated to one or more output channels. The amplifier is capable of driving both low impedance and 70/100V loudspeaker loads directly.
  • Bose® ControlSpace® Designer™ software – PowerMatch amplifiers can be fully configured using ControlSpace Designer software via the onboard front panel USB connection, or the rear panel Ethernet connection (network models only). Using ControlSpace Designer software you can access additional features including: Parametric EQ stages, load sweep of each output channel and auto standby. ControlSpace Designer software is also used to integrate network model PowerMatch amplifiers into larger control and monitoring systems comprised of Bose ESP processors and CC control centers.
  • Auto-Standby/Auto-Wake function – When enabled, this function automatically enters/exits Standby Mode, allowing the system to consume less power.
  • Dual voltage and current feedback loop – Proprietary design combines Class-D efficiency with a unique current and voltage feedback loop circuit that continuously monitors and controls both the current and voltage delivered to the loudspeaker load. Independent of power level and load impedance, the amplifier consistently delivers the widest possible dynamic range, frequency response and lowest possible distortion.
  • PeakBank™ power supply – Regenerative 4-quadrant power supply enables higher power density while allowing the re-use of energy from reactive loads that is normally wasted in conventional Class-D designs. This highly efficient amplifier design delivers sustainable and repeatable low frequency response.
  • Fast-tracking power factor correction (PFC) – Efficiently manages the current drawn from the AC mains, allowing the amplifier to drive loudspeakers to maximum output longer without power fluctuation. PFC provides superior transient response and functions at peak burst power much longer than conventional Class-D amplifier designs to satisfy the requirements of even the most demanding program material.
  • Auditoriums
  • Performing arts venues
  • Theaters
  • Houses of worship
  • Arenas
  • Hospitality venues

View Complete Details

Yes, I am interested!
4.0/5★★★★★★★★★★

Reviewed by 4 Users

5 star2

4 star1

3 star0

2 star1

1 star0

User Satisfaction

Response100%

Quality100%

M

Mayank Aggarwal ★★★★★ ★★★★★

02-July-20

Response

Thanks

M

MUHAMMED ★★★★★ ★★★★★

11-May-20

Quality

Tell us what you need, and we’ll help you get quotes
Tell us what you
need
Receive seller
details
Seal the deal
Pay with IndiaMART
Tell us what you need, and we’ll help you get quotes
I agree to the terms and privacy policy