X
View Mobile Number 80% Response Rate

Ardex Endura

Our range of products include Aredex Endura Floor Hardener, Tile Epoxy Grout, Ardex Wpm 400, Ardex Endura AC 20 Anti Carbonation Facade Protective Coating, Ardex Endura PU Waterproofing and Polyurethane Waterproof Coating.

Aredex Endura Floor Hardener
Interested in this product?
Get Best Quote

Aredex Endura Floor Hardener

Rs 10 / KgGet Latest Price

BrandEndura
Usage/ApplicationFlooring
Packaging Size25kg
Packaging TypeBag

Aredex Endura Floor Hardener is a pre-mix blended powder containing hydraulic binders and special wear resistance mineral aggregates. It is used as a dry shake over fresh, wet concrete to provide a dense, non-porous surface which is extremely hardwearing and abrasion resistant. Aredex Endura Floor Hardener provides a slip floor resistant surface which will never rust and disintegrate.

View Complete Details

Yes, I am interested!

Tile Epoxy Grout
Interested in this product?
Get Best Quote

Tile Epoxy Grout

Rs 500 / KgGet Latest Price

BrandEndura
Usage/ApplicationConstruction

DESCRIPTION
EPOXY GROUT is hygienic, stain-resistant, 3 component epoxy resin-based grout with a high degree of resistance to chemical attack, abrasion and impact. The cured grout does not transfer taints to food products, prevents the entry of bacteria or dirt and is easily maintained in a sterile condition. EPOXY GROUT is designed for grouting glazed tiles, mosaic, vitrified and fully vitrified tiles, ceramic tiles, industrial tiles, granites, marbles & other natural stones, etc.
FEATURES
 
• Hygienic and chemical resistant
• Stain and bacterial resistant
• Provides high strength and durable joints
• Suitable for submerged conditions
• Easy to be cleaned from tiled surface
• Suitable for joint width of 1 – 12 mm
• For interior & exterior use
• Available in range of colours
• Conforms to the Global Migration Test laid by USFDA for intended use for contact with aqueous food & beverage (water based) products
• Exceeds EN 13888 requirements
COLOURS
Available in range of colours.
Note?? Please contact ARDEX ENDURA Sales representative for more details on the available range of colour.

COVERAGE
Consumption depend on joint width, size of tiles
PACK SIZE
5 kg (2.5 kg x 2) & 1 kg sets
 
MIXED DENSITY
1.70

View Complete Details

Yes, I am interested!

Ardex Wpm 400
Interested in this product?
Get Best Quote

Ardex Wpm 400

Rs 500 / KgGet Latest Price

INFORMATION

ARDEX WPM 400 is a hot-applied, highly elastic 100% pure polyurea waterproofing membrane, with high mechanical and chemical resistance. Once dry, it forms a continuous waterproof membrane, without joints or need for overlap or reinforcement. It provides permanent elasticity, even at very low temperatures, and is able to absorb substrate movements.

 

The rapid polymerisation of ARDEX WPM 400 means it can adapt to any surface and attain waterproofing properties within three hours (optimal properties are achieved in 24 hours).

 

Note: ARDEX WPM 400 is not stable when exposed to UV rays, resulting in a major change in colour: to protect ARDEX WPM 400 from UV, use ARDEX WPM 400 Finish aliphatic polyurethane coating

 

Use:

 

·       Waterproofing balconies, roofing, terraces

·       Floors requiring both substrate waterproofing and high mechanical & chemical resistance

·       Waterproofing metallic roofs

·       Pool and pond waterproofing

·       Waterproofing tanks & irrigation channels

·       Encapsulation of fibre cement roofing

View Complete Details

Yes, I am interested!

Ardex Endura AC 20 Anti Carbonation Facade Protective Coating
Interested in this product?
Get Best Quote
Usage/ApplicationBuildings and structures in coastal areas,Bridges,flyovers,aqua ducts,via ducts,Chimneys etc
Packaging Size20 litres
CoverageApproximately 3.50 m2/ltr @ 20 microns in 2 coats (without dilution
TypeAnti Carbonation Coating

AC 20 is an extremely weather resistant water based acrylic anti carbonation protective coating. The high build breathable coating exhibits excellent resistance to attack by carbon oxide, air borne chlorides and acid rain.

Features:
  • High resistance to Carbon dioxide (CO2)
  • Resistance to fungi & algae growth
  • Excellent UV resistance
  • Excellent flexibility & crack bridging properties
  • Economic and versatile product

Application Instructions:
Surface Preparation
The surface to be treated must be dry, clean, structurally sound, and free from oil, grease, wax, polish, laitance, dust and other barrier materials. All holes and cracks must be filled with a suitable filler material such as ACF 8 (acrylic crack filler paste).

Priming:
Apply WPM 209 primer using a brush or roller. Allow it to dry for 6 hr 

Note: WPM 209 should be applied on concrete which is 28 days old

How to apply:
Add 20% of water to the container of AC 20 and stir well before application. AC 20 may be applied by brush or roller in 2 coats with an overcoat interval of 8 - 10 hrs.

Cleaning:
AC 20 can be removed from tools and equipment by using clean water immediately after use. Any hardened material will need to be removed mechanically

Precautions:
During mixing and application the following precautions should be observed: ensure adequate ventilation and avoid contact of the material with the eyes, nasal passages, mouth and unprotected skin. Avoid contact with the hands by wearing protective gloves and by using, if necessary, a suitable barrier cream. In case of contact with the eyes, rinse immediately with plenty of water and seek medical advice and after contact with the skin wash immediately with plenty of soap and water. Prolonged contact with the skin should be avoided. Observe personal hygiene, particularly washing the hands after work has been completed or at any interruption whilst work is in progress. Care should be taken when removing gloves to avoid contaminating the insides. In case of accidents seek medical advice

Disposal/Spillage:
Spillage of any product should be absorbed onto sand or other inert materials and transferred to a suitable disposable vessel. Disposal of such spillage or empty packaging should be in accordance with local waste disposal authority regulation

View Complete Details

Yes, I am interested!

Ardex Endura PU Waterproofing
Interested in this product?
Get Best Quote

Ardex Endura PU Waterproofing

Rs 490 / KgGet Latest Price

Packaging Size20Kg

WPM 810 is a single component; high performance polyurethane based cold applied elastomeric waterproofing membrane. WPM 810 exhibits high elasticity, excellent bond and low water permeability and makes it ideal for a wide range of waterproofing applications. The cured membrane forms an elastic, seamless, waterproof coating with good crack-bridging properties.

FEATURES

• Non Toxic: eco friendly coating
• Seamless cold-applied membrane: eliminates lapping, seaming, and pre-cutting
• Highly flexible: can accommodate movements and vibrations
• Root Resistant
• Outstanding barrier properties: ensures protection against corrosive soil conditions
• Thermally stable: irreversible chemical cure, eliminates melting and flow at high temperature
• Excellent adhesion to concrete substrates
• Excellent resistance to oxidation
• Good chemical resistance to most weak acids and alkali, water borne salts and sea water

COVERAGE

Approximately 18 m² @ 1mm

PACK SIZE

20 kg

View Complete Details

Yes, I am interested!

Polyurethane Waterproof Coating
Interested in this product?
Get Best Quote

WPM 810

Elastomeric, single component, polyurethane based cold liquid applied waterproofing membrane

DESCRIPTION

WPM 810 is a single component; high performance polyurethane based cold applied elastomeric waterproofing membrane. WPM 810 exhibits high elasticity, excellent bond and low water permeability and makes it ideal for a wide range of waterproofing applications. The cured membrane forms an elastic, seamless, waterproof coating with good crack-bridging properties.

View Complete Details

Yes, I am interested!

CL11- Commercial Grade Self Leveling Compound
Interested in this product?
Get Best Quote

CL11- Commercial Grade Self Leveling Compound

Rs 1,400 / BagGet Latest Price

Minimum Order Quantity: 300 Bag

Packaging Size25 Kg Bag
BrandArdex Endura
Physical StatePowder
Packaging TypeBags
ConsumptionApprox. 5 m2 at 3 mm thick
Country of OriginMade in India

CL 11 has been especially designed to produce a smooth, flat surface when applied to hard, rigid sub-floors such as cement sand screeds, concrete, etc. CL 11 contains high quality special cements and selected fillers so that, when mixed with water, it produces a free flowing mortar with self-levelling properties. The mortar can be applied at a thickness from 3 – 5mm and suitable for internal areas only.

Additional Information:

  • Delivery Time: 3-4 Days

View Complete Details

Yes, I am interested!

Ardex Wpm 300
Interested in this product?
Get Best Quote

Ardex Wpm 300

Rs 450 / KgGet Latest Price

Packaging Size20 Kg
Packaging TypeBucket

WPM 300

Water based epoxy membrane

DESCRIPTION

WPM 300 is a two component, high build, water based epoxy polyamide membrane/barrier coating with excellent resistant to hydrostatic pressure and good bond to damp surfaces. It is suitable for areas such as potable water tanks where a tough, hard wearing protective surface resistant to corrosion, chemical attack and bacterial growth is necessary.

WPM 300 is approved for use with potable (drinking) water, independent testing confirms conformity with the requirements of AS/NZS 4020:1999 and BS 6920:2000.

View Complete Details

Yes, I am interested!

Get in touch with us

Reach Us

Buildcon Infra-Chem TechnologyJEEVAN NAGAR,PLOT NO 118,NEHARPAR, GREATER FARIDABAD,INDUSTRIAL AREA WAZIRPUR ROAD,FARIDABAD, Near Kheri Pull, Old Faridabad, Faridabad-121002, Haryana, India

Pankaj Sharma (Marketing Head)

View Mobile Number80% Call Response Rate

Send SMS
Send Email
Send Payment
Leave a Message, we will call you back!
Send your enquiry to this supplier
I agree to the terms and privacy policy

We Accept Online Payments

All Rights Reserved (Terms of Use)