Buildcon Infra-Chem Technology

Application	Construction
Brand	Fosroc
Packaging Size	250Kg
Packaging Type	Drum

Being a foremost organization in the industry, we are actively engaged in offering the best quality range of Conplast NC Concrete Admixture.

Other Details:
Conplast NC chloride-free accelerating admixture is supplied as a light straw-coloured solution that instantly disperses in water.Conplast NC accelerates the early stages of cement hydration, producing more rapid stiffening and allowing strength gain to commence at an earlier stage. This effect is particularly noticeable at low temperatures and is most significant in the first 24 hours after mixing.Advantages:

• Particularly effective in assisting to offset the delaying effect of low temperatures on setting and strength gain.
• Accelerated setting gives added protection against early age frost attack.
• Also provides a degree of water reduction or increased workability.
• Suitable for use in bricklaying mortar.
• Chloride-free, safe for use in reinforced concrete.

Brand

FOSROC

Auramix 350
High Performance PCE based admixture for wide range of concrete grades.

Uses
Auramix 350 is a high performance super plasticizer suitable for low and high grade concrete and intended for applications where high water reduction and long workability retentions are required.

Auramix 350 developed to use in:

• Long workability retention concrete.
• Pumpable Concrete.
• High performance concrete

Additional Information:

• Packaging Details: 250 Kg Drum

Brand	Fosroc
Grade Standard	Industrial Grade
Features	Impact Resistant, Heat Resistant, Moisture Resistant

We are dealing into the shuttering oil,silica gel crystal,sodium hypochlorite and all such type ofr solvents

Grade Standard	Industrial Grade
Appearance	Deep brown colored liquid
Specific Gravity	1.110 to 0.02

Conplast SP430 is a chloride free, super plasticizing admixture based on selected sulphonated naphthalene polymers. It is supplied as a brown solution which instantly disperses in water.

Uses:
To provide excellent acceleration of strength gain at early ages and major increases in strength at all ages by significantly reducing water demand in a concrete mix.
Particularly suitable for precast concrete and other high early strength requirements.
To significantly improve the workability of site mixed and precast concrete without increasing water demand.
To provide improved durability by increasing ultimatestrengths and reducing concrete permeability.Advantages:
Major increases in strength at early ages without increased cement contents are of particular benefit in precast concrete, allowing earlier stripping times.
Makes possible major reductions in water:cement ratio which allow the production of high strength concrete without excessive cement contents.
Use in production of flowing concrete permits easier construction with quicker placing and compaction and reduced labour costs without increasing water content.
Increased workability levels are maintained for longer than with ordinary sulphonated melamine admixtures.
Improved cohesion and particle dispersion minimises segregation and bleeding and improves pumpability.
Chloride free, safe for use in prestressed and reinforced concrete.

Product Details:

Renderoc FC cementitious, polymer modified, fairing coat is designed for vertical and overhead use to infill honeycombing and voids up to 3 mm deep in the surface of concrete which is not trafficked and is subsequently coated.
Renderoc FC is supplied as a ready to use blend of dry powders requiring only the site addition of clean water to produce a highly consistent cementitious fairing mortar. The material has good handling characteristics, while minimising water demand.The product exhibits excellent thermal compatibility with concrete and is fully compatible with other Renderoc mortars and Dekguard coatings. 

• Compatibility with non-structural concrete of compressive strength 20 - 35 MPa
• Polymer-modification provides extremely low permeability to water, carbon dioxide and chlorides
• Excellent bond to concrete
• Can be applied quickly and efficiently
• One component, pre-bagged to overcome site-batched variations
• Contains no chloride admixtures

Details -

• Coefficient of thermal expansion: 7 - 12x 10-6/°C
• Working life:Approximately 20 minutes**
• Setting time (BS 4550):30 minutes - 1 hour**
• Fresh wet density:Approximately 2000 kg/m³

Brand	Fosroc
Packaging Size	20 Kg
Packaging Type	Bag

Nitotile GPX is a high quality adhesive for the permanent fixing of ceramic tiles. It can also be used for fixing of insulating and acoustic boards based on expanded polystyrene etc.

Typical uses include :
 Wet areas - kitchens and bathrooms
 Tile claddings

Advantages
 Tropical grade to suit Indian working conditions  Good open wet time
 Good slip resistance
 High adhesion strength
 Water proof
 Good slip resistance
 Can be used in totally submerged conditions

Type	Construction adhesives & sealants
Packaging Type	Packet
Grade standard	Technical grade

Product Details: Single part, non shrink, cementitious, crack sealerfor plaster, masonry and concrete

Renderoc FC cementitious, polymer modified, fairing coat is designed for vertical and overhead use to infill honeycombing and voids up to 3 mm deep in the surface of concrete which is not trafficked and is subsequently coated.
Renderoc FC is supplied as a ready to use blend of dry powders requiring only the site addition of clean water to produce a highly consistent cementitious fairing mortar. The material has good handling characteristics, while minimising water demand.The product exhibits excellent thermal compatibility with concrete and is fully compatible with other Renderoc mortars and Dekguard coatings. 

• Compatibility with non-structural concrete of compressive strength 20 - 35 MPa
• Polymer-modification provides extremely low permeability to water, carbon dioxide and chlorides
• Excellent bond to concrete
• Can be applied quickly and efficiently
• One component, pre-bagged to overcome site-batched variations
• Contains no chloride admixtures

Details -

• Coefficient of thermal expansion: 7 - 12x 10-6/°C
• Working life:Approximately 20 minutes**
• Setting time (BS 4550):30 minutes - 1 hour**
• Fresh wet density:Approximately 2000 kg/m³

Brand	FOSROC
Packaging Size	4 ltr

Heavy duty epoxy urethane joint sealant

Uses

For sealing internal floor joints subject to heavy industrialuse in factories,
food processing areas, warehouses andmaintenance facilities.
Particularly suitable for sawn joints inlong strip flooring
and other large internal areas.