X

Buildcon Infra-Chem Technology

Faridabad, Haryana

| GST  06AARFB9485B1Z5

| TrustSEAL Verified

|

★★★★★
★★★★★
View Mobile Number 85% Response Rate

Our Products

+View All

New Items

Prominent & Leading Manufacturer from Faridabad, we offer Auramix 400 QCDA 898, Nitocote EP405 Chemical, Fosroc Conbextra EP120LE Epoxy Grout, Fosroc Sprayset SL Concrete Admixture, Renderoc HS XTRA and Silica Fume.

Auramix 400 QCDA 898
Interested in this product?
Get Best Quote

Auramix 400 QCDA 898

Rs 75 / KgGet Latest Price

AppearanceYellowish to Brownish
Specific Gravity1.0 3 - 1.07
Formliquid

We have gained a remarkable position in the market that is involved in offering Auramix Superplasticizer.

  • Increased retardation controls the heat of hydration and
  • yields high ultimate strength
  • Higher E modulus
  • Improved adhesion to reinforcing and prestressing steel
  • Better resistance to carbonation
  • Lower permeability
  • Better resistance to aggressive atmospheric conditions
  • Reduced shrinkage and creep
  • Increased durability

View Complete Details

Yes, I am interested!

Nitocote EP405 Chemical
Interested in this product?
Get Best Quote

Nitocote EP405 Chemical

Get Latest Price

FormLiquid
Packaging typeBucket

Product Details:
TypesSolid , Solvent Based , Water Based
Application MethodSpray , Brush , Roller , Water
ClassificationSelf Levelling , Mortar Epoxy Coating, Gravelled Epoxy Coating, Epoxy Antistatic Floor

Nitocote EP405 is based on solvent-free epoxy resins modified with coal tar pitch. It is supplied as a two pack materials in pre-weighed quantities ready for on-site mixing and use.

Nitocote EP405 is applied as a two coat application.

  • High build, single coat application
  • Good chemical resistance.
  • Primerless.
  • Excellent hold-out on vertical surfaces.
  • Moderate flexibility.

Details -

  • Pot life - 2  hrs
  • Time between coats- 4 hrs
  • Full hardness- 24hrs
  • Full Cure- 7 days
  • Compressive Strength -40  N/mm2

View Complete Details

Yes, I am interested!

Fosroc Conbextra EP120LE Epoxy Grout
Interested in this product?
Get Best Quote
We have gathered huge recognizance by providing highly demanded Fosroc Conbextra EP120LE Epoxy Grout. We take pride in presenting the highly reliable and durable free flowing epoxy resin grout that is widely utilized in heavy dynamic or mobile loads. Suitable for a gap range of 10mm - 120mm, the offered product can even performance exceptionally well in areas where high ambient temperatures are encountered. 

Features:

 
  • Fast and convenient installation
  • High compressive strength
  • Low temperature rise
  • Impervious to oil and chemicals
Advantages 

  • Low temperature rise during cure ( <95 0 F)
  • Low creep characteristics under sustained loading
  • Resistant to repetitive dynamic loads
  • Non-shrink and hence ensures complete surface contact and bond
  • High compressive, tensile and flexural strengths
  • Fast, convenient installation with early strength gain
  • Impervious to oil and chemical attack
  • Strong bond to metal and concrete
  • Suitable for narrow and large gaps

Description:
 

  • Conbextra EP120LE is a low exotherm material which is particularly suitably where long working time is needed and also for narrow & large gaps.

Technical support:

  • Fosroc offers a technical support package to specifiers and contractors as well as technical advice from staff with unrivalled experience in the industry.

Chemical resistance:
 

  • Conbextra EP120LE is resistant to oil, grease, fats, most chemicals, mild acids and alkalis, fresh and sea water. Consult Fosroc when exposure to solvent or concentrated chemicals is anticipated.

Pot life:
 

  • Ambient temperature affects the time for which bulk material will remain fluid.

Application instructions: 


  • All contact surface must be free from oil, grease, free standing water or any loosely adherent material. Concrete surfaces should be cut back to a sound base.
  • All dust must be removed and bolt holes or fixing pockets blown clean of any dirt or debris.

View Complete Details

Yes, I am interested!

Fosroc Sprayset SL Concrete Admixture
Interested in this product?
Get Best Quote
Sprayed concrete admixture

Uses

Sprayset SL is used in sprayed concrete, shotcrete and gunite processes where rapid setting is required. 

Advantages 

  • Rapid set allows fast build-up
  • Minimum rebound
  • Single pass spraying for thick coating
  • Excellent for overhead surfaces
  • Can be used for ‘wet and dry’ processes
  • Non-flammable

Description

Sprayset SL is a chloride free accelerating admixture. It is supplied as a pale yellow solution which is introduced through the spraying nozzle. 

Technical support

Fosroc provides a technical advisory service for on-site assistance and advise on admixture selection, evaluation trials and dispensing equipment. Technical data and guidance can be provided for admixtures and other products for use with fresh and hardened concrete. 

Typical dosage 

The optimum dosage for Sprayset SL to meet specific requirements should always be determined by trials using the materials and conditions that will be experienced in use. This allows the optimisation of admixture dosage and mix design and provides a complete assessment of the concrete mix. A starting point for such trials is to use a dosage within the normal typical range of 1.0 to 5.0 litres/100 kg of cementitious material, including PFA, GGBFS or microsilica. 

Use at other dosages 

Dosages outside the typical range quoted above may be used if necessary and suitable to meet particular mix requirements, provided that adequate supervision is available. Compliance with requirements must be assessed through trial mixes. Contact Fosroc for advice in these cases.

Application instructions

Compatibility

Sprayset SL is compatible with other Fosroc admixtures in the same concrete mix. All admixtures should be added to the concrete separately and must not be mixed together prior to addition. The performance of concrete containing more than one admixture should be assessed by trial mixes to ensure the desired combination of effects is obtained.
Sprayset SL is suitable for use with all types of ordinary Portland cements and cement replacement materials such as PFA, GGBFS and silica fume.

Stiffening and set

Stiffening occurs approximately after 10 seconds. As is usual with rapid initial acceleration of the cement hydration process the 28 day compressive strength will normally be reduced by approximately 25-35 %.

Dispensing and mixing 

Sprayset SL is normally introduced directly after the air ring in the spray nozzle. In order to obtain a consistent supply of admixture at the nozzle the delivery system recommended is as follows : a pressure pot operating at 600 KPa delivery through a 20mm inside diameter pressure hose controlled by a pressure restrictor and tap.

With the ‘wet process’ significant advantage can be obtained by using a water reducing admixture such as Conplast P211 to reduce the water content of the mix.

Effects of overdosing

An overdoes of double the intended amount of Sprayset SL will result in increased setting of the mix before it reaches the surface to be sprayed. It will also result in a loss of strength. 

Estimating

Packaging 

Sprayset SL is available in 20 and 100 litre containers. 

Storage 

Sprayset SL has a minimum shelf life of 6 months in unopened original containers under normal warehouse conditions provided the temperature is kept within the range of 200 C to 400C.

View Complete Details

Yes, I am interested!

Renderoc HS XTRA
Interested in this product?
Get Best Quote

Renderoc HS XTRA

Rs 14 / KilogramGet Latest Price

Product Details:
Brandfosroc

Renderoc FC cementitious, polymer modified, fairing coat is designed for vertical and overhead use to infill honeycombing and voids up to 3 mm deep in the surface of concrete which is not trafficked and is subsequently coated.
Renderoc FC is supplied as a ready to use blend of dry powders requiring only the site addition of clean water to produce a highly consistent cementitious fairing mortar. The material has good handling characteristics, while minimising water demand.The product exhibits excellent thermal compatibility with concrete and is fully compatible with other Renderoc mortars and Dekguard coatings. 

  • Compatibility with non-structural concrete of compressive strength 20 - 35 MPa
  • Polymer-modification provides extremely low permeability to water, carbon dioxide and chlorides
  • Excellent bond to concrete
  • Can be applied quickly and efficiently
  • One component, pre-bagged to overcome site-batched variations
  • Contains no chloride admixtures

Details -

  • Coefficient of thermal expansion: 7 - 12x 10-6/°C
  • Working life:Approximately 20 minutes**
  • Setting time (BS 4550):30 minutes - 1 hour**
  • Fresh wet density:Approximately 2000 kg/m³

View Complete Details

Yes, I am interested!

Silica Fume
Interested in this product?
Get Best Quote

Silica Fume

Rs 20 / KilogramGet Latest Price

Micro Silica is a by-product material which consists of non-crystalline silicon dioxide with high specific surface area and high pozzolanic reactivity. Use of it in concrete as pozzolanic material has demonstrated significant influence in improving the mechanical and durability properties. Micro Silica is a highly pozzolanic material. The non-crystalline silica and high specific surface area of our product are responsible for its high pozzolanic reactivity.
Setting time: Initial and final setting time of concrete depends on the particle size & surface area. Our product with finer particles exhibits superior setting time.
Compressive strength:

Normally use of our Micro Silica in the below mentioned percentages enhances the compressive strength. 10% to 15% - High strength structural columns 10% - Flatwork 8% to 10% - High durability / Low permeability such as bridge decks or parking structures 8% to 15% - by weight of cement but as an addition not replacement.


Conclusions: Our material is an effective Pozzolana which can contribute to mechanical properties of concrete. Use of our product in concrete can decrease the temperature effect that occurs during the cement hydration. It can improve the workability of concrete. It can also increase the initial and also final setting time. Additionally, our material blended concrete can decrease the total porosity of concrete and significantly reduce the permeability which allows the influence of harmful ions leading to the deterioration of the concrete matrix. It helps in enhancing the early age mechanical properties as well as long-term strength properties of concrete. It also reduces the water penetration into concrete by capillary action. It is effective for improving the resistance of concrete to sulphate attack. 

Advantages of adding MICROSILICA (SILICA FUMES):

·         Increased compressive and flexural strengths

·         Reduced permeability

·         Increased resistance to chemical attack

·         Increased durability

·         Reduced effects of alkali-silica reactivity

·         Reduced shrinkage due to particle packing, making concrete denser

·         Enhanced workability of concrete

·         Reduced heat gain through the walls of buildings

·         Reduced amount of super plasticizer

·         Reduced potential for efflorescence due to reduced calcium hydracids     

Applications of MICROSILICA: 

·         Micro Silica in concrete industry application.

·         Micro Silica in refractory industry application.

·         Micro Silica in rubber industry application.

·         Micro Silica as anti-caking agent.

·         Micro Silica as pellet binders.

·         Micro Silica in water glass industry.

·         Micro Silica in drilling industry.  

·         Micro Silica in Paint Industry 



Additional Information:

  • Delivery Time: 4-5 days

View Complete Details

Yes, I am interested!

Fosroc Patchroc Concrete Additives
Interested in this product?
Get Best Quote

Fosroc Patchroc Concrete Additives

Rs 35 / KilogramGet Latest Price

Patchroc is supplied as a pre-blended dry powder to which water is added to produce an easily trowellable mortar. Patchroc is a blend of inorganic cements, additives to modify and control the rate of setting and strength gain, with selected hard wearing aggregates. Patchroc does not contain calcium chloride.

Patchroc has been designed for the patching of small areas of concrete i.e., individual patches requiring not more than 12.6 litre yield per 25kg bag of Patchroc.

The blend of cements eliminates shrinkage with the consequent reduction of stress at the bond line. Long lasting adhesion is ensured by the use of Nitobond AR bonding agent.

  • Medium Fast setting - Minimum disruption to traffic
  • Easy to use - Needs only the addition of water.
  • Easy to lay - Very easy to apply & finish
  • Non shrink - Does not crack
  • High adhesion - Use Nitobond AR as primer ensures good bonding to concrete substrates.
  • Durable & Tough surface - Resistant to wear and tear

View Complete Details

Yes, I am interested!

Polycarboxylate Superplasticizer
Interested in this product?
Get Best Quote

Polycarboxylate Superplasticizer

Rs 80 / KilogramGet Latest Price

Minimum Order Quantity: 215 Kilogram

Grade StandardChemical Grade
FormLiquid

Keeping in mind ever-evolving requirements of our respected clients, we are providing a premium quality range of Polycarboxylate Superplasticizer.

Other details:
With highly driven ethnically excellence, our organization is actively committed towards trading and supplying the best grade concrete admixtures. We provide admixtures of fosroc,basf and sika.
The properties commonly modified are the heat of hydration, accelerate or retard setting time, workability, water reduction, dispersion and air-entrainment, impermeability and durability factor
The products are used in designing floors and construction of walls in buildings. The mixtures are offered at competitive prices and checked thoroughly for quality.
Features:
  • affordable
  • high quality
  • accurate result

Application :
  • 0.3 to 1.3 % chemical admixture as cement weight
  • always cover the chemical admixture after use
  • shake well before use
  • available in 50 ,200 250 kg pack

View Complete Details

Yes, I am interested!

Anchors Grouts
Interested in this product?
Get Best Quote

Anchors Grouts

Get Latest Price

Packaging TypeBag
FeatureQuality Tested
Packaging size25 Kg

Keeping track with latest market trends, we are devotedly engaged in offering a wide assortment of Anchors Grouts.

 

Other Details:

Our clients can avail from us premium range of Anchors Grouts, that is formulated in compliance with industry standards. Under the supervision of our expert professionals, these are prepared using high grade ingredients. These are known for accurate composition, stability, correct formulation and a host of other features. Offered at competitive prices.

View Complete Details

Yes, I am interested!

Conplast WP 90 Mixes
Interested in this product?
Get Best Quote

Conplast WP 90 Mixes

Get Latest Price

Packaging Typepacket
ApplicationIndustrial
FormPowder

Conplast WP90 powder is a fine, white powder ready for use with concrete or cement mortar mixes. Conplast WP90 powder is a traditional admixture to fill natural pores within the concrete or mortar matrix to reduce porosity and improve water tightness.

Advantages:
  • Easy to use- Simple application familiar to site operations
  • High Quality - Traditional waterproofing material manufactured to latest standards.
  • Workability - Improves workability

View Complete Details

Yes, I am interested!

Conplast P211 Admixture
Interested in this product?
Get Best Quote

Conplast P211 Admixture

Get Latest Price

Packaging Size1 Ltr. , 20 Ltr, 200 Ltr
Packaging TypeBottle and Container
ApplicationConstruction

By keeping track with the latest market developments, we are involved in providing a wide gamut of Conplast Admixture P211(Concrete Admixture). This range is sourced from the authentic vendors of the market, who make use of superior grade raw material in its processing procedures. Owing to high strength, unmatched quality and elevated durability, these admixtures are extensively used to enhance the effectiveness of water content of a concrete mix. In addition, we also provide application support of this gamut to our clients as per their specific requirements. Specifications: Appearance : Brown liquid Specific gravity : 1.150 - 1.170 @250C Chloride content : Nil to IS:456 Air entrainment : Typically less than 1.5%. Additional air is entrained at normal dosages. Alkali content : Typically less than 5.0g Na2O equivalent / litre of admixture. Available In: Conplast Admixture P211 Conplast Admixture SP430 Conplast Admixture RP264 Conplast Admixture NC Rheomac 707

View Complete Details

Yes, I am interested!

Conplast NC Concrete Admixture
Interested in this product?
Get Best Quote
Packaging TypeCan
ApplicationConstruction
Grade StandardReagent Grade

Being a foremost organization in the industry, we are actively engaged in offering the best quality range of Conplast NC Concrete Admixture.

Other Details:
Conplast NC chloride-free accelerating admixture is supplied as a light straw-coloured solution that instantly disperses in water.Conplast NC accelerates the early stages of cement hydration, producing more rapid stiffening and allowing strength gain to commence at an earlier stage. This effect is particularly noticeable at low temperatures and is most significant in the first 24 hours after mixing.Advantages:
  • Particularly effective in assisting to offset the delaying effect of low temperatures on setting and strength gain.
  • Accelerated setting gives added protection against early age frost attack.
  • Also provides a degree of water reduction or increased workability.
  • Suitable for use in bricklaying mortar.
  • Chloride-free, safe for use in reinforced concrete.

View Complete Details

Yes, I am interested!

Conplast SP430 G8
Interested in this product?
Get Best Quote

Conplast SP430 G8

Rs 35 / KilogramGet Latest Price

Grade StandardIndustrial Grade
AppearanceDeep brown colored liquid
Specific Gravity1.110 to 0.02

Conplast SP430 is a chloride free, super plasticizing admixture based on selected sulphonated naphthalene polymers. It is supplied as a brown solution which instantly disperses in water.

Uses:
To provide excellent acceleration of strength gain at early ages and major increases in strength at all ages by significantly reducing water demand in a concrete mix.
Particularly suitable for precast concrete and other high early strength requirements.
To significantly improve the workability of site mixed and precast concrete without increasing water demand.
To provide improved durability by increasing ultimatestrengths and reducing concrete permeability.Advantages:
Major increases in strength at early ages without increased cement contents are of particular benefit in precast concrete, allowing earlier stripping times.
Makes possible major reductions in water:cement ratio which allow the production of high strength concrete without excessive cement contents.
Use in production of flowing concrete permits easier construction with quicker placing and compaction and reduced labour costs without increasing water content.
Increased workability levels are maintained for longer than with ordinary sulphonated melamine admixtures.
Improved cohesion and particle dispersion minimises segregation and bleeding and improves pumpability.
Chloride free, safe for use in prestressed and reinforced concrete.

View Complete Details

Yes, I am interested!

Renderoc RG Micro Concrete
Interested in this product?
Get Best Quote

Renderoc RG Micro Concrete

Rs 12 / KilogramGet Latest Price

Thermal conductivity1.5 W/mC
Coefficient of thermal10 - 12 x 10-6 / 0Cexpansion
Plastic expansionApprox. 0.004N/mm2.

We are ranked amongst the renowned organizations that are engaged in providing the best quality range of Renderoc RG Cement Additives.
Other Details:
Renderoc RG Spl is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a free-fl owing non-shrink repair micro concrete. The material is based on Portland cements, graded aggregates and fi llers, and additives which impart controlled expansion characteristics in the plastic state, while minimising water demand. The low water requirement ensures high early strength and long-term durability.
For larger repairs, the mixed Renderoc RG Spl may be modified by the addition of 5mm to 12mm clean, graded, saturated surface dry aggregates at site. For exceptionally large repairs, the local Fosroc offi ce shall be consulted.
Gaseous expansion system compensates for shrinkage and settlement in the plastic state.
Can be pumped or poured into restricted locations.
Fluidity to allow for placement without vibration.
Pre-bagged to overcome site-batched variations.
Rapid strength gain to facilitate early reinstatement.
High ultimate strengths and low permeability of cured repair.
Contains no chloride admixture.
Details:
Young's Modulus-25 kN/mm2
Fresh wet density -2100 - 2200 kg/m 3(Mixed density @27C

View Complete Details

Yes, I am interested!

Auramix 400 QCDA 830
Interested in this product?
Get Best Quote

Auramix 400 QCDA 830

Rs 80 / KgGet Latest Price

Auramix 400 is a unique combination of the latest generation superplasticisers, based on a polycarboxylic ether polymer with long lateral chains.

View Complete Details

Yes, I am interested!

Cement Grout
Interested in this product?
Get Best Quote

Cement Grout

Rs 12 / KilogramGet Latest Price

Packaging Size25kg bag
ColorGray

We are dealing into the shuttering oil,silica gel crystal,sodium hypochlorite and all such type ofr solvents

View Complete Details

Yes, I am interested!

Nitobond Ep
Interested in this product?
Get Best Quote

Nitobond Ep

Rs 650 / PackGet Latest Price

BrandFosroc
Grade StandardIndustrial Grade
FeaturesHeat Resistant, Impact Resistant, Moisture Resistant

We are dealing into the shuttering oil,silica gel crystal,sodium hypochlorite and all such type ofr solvents

View Complete Details

Yes, I am interested!

Conplast AEA
Interested in this product?
Get Best Quote

Conplast AEA

Get Latest Price

ApplicationIndutrial Use
Packaging Size200 ltr.
Packaging TypeDrum

We are dealing into the shuttering oil,silica gel crystal,sodium hypochlorite and all such type ofr solvents

View Complete Details

Yes, I am interested!

Auramix 100
Interested in this product?
Get Best Quote

Auramix 100

Get Latest Price

Auramix 100 is specially designed water reducing admixture for the ready mix market and is based on selected lignosulphonates and the latest generation of polycarboxylate polymers.

It is supplied as a low viscosity brown solution which instantly disperses in water.

  • Increased early and final strengths
  • Excellent workability retention with no set retardation
  • Chloride free. Ideal for concrete containing embedded steel.
  • Versatile performance over various concrete grades.
  • Reduced shrinkage and permeability
  • For use in low and high workability concrete. 

View Complete Details

Yes, I am interested!

Auracast 200
Interested in this product?
Get Best Quote

Auracast 200

Get Latest Price

Fosroc Auracast 200 is a unique combination of the latest generation of polycarboxylate polymers which act synergistically to outperform conventional superplasticisers.

Fosroc Auracast 200 has been specifically developed for the precast concrete industry coupling superior high range water reducing capabilities and excellent dispersion levels with robust performance.

Fosroc Auracast 200 is ideal for use in precast concrete where the desire to maximise the performance of the concrete in the plastic and hardened state is preeminent.

View Complete Details

Yes, I am interested!

Conplast SP500
Interested in this product?
Get Best Quote

Conplast SP500

Get Latest Price

Description:

Conplast SP500 is based on Sulphonated Napthalene Polymers and is supplied as a brown liquid instantly dispersible in water.

Conplast SP500 has been specially formulated to give high water reductions up to 25% without loss of workability or to produce high quality concrete of reduced permeability.

Advantages:

  • Improved workability - Easier, quicker placing and compaction.
  • Increased strength - Provides high early strength for precast concrete if water reduction is taken advantage of.
  • Improved quality - Denser, close textured concrete with reduced porosity and hence more durable.
  • Higher cohesion - Risk of segregation and bleeding minimised; thus aids pumping of concrete.
  • Chloride free - Safe in prestressed concrete and with sulphate resisting cements and marine aggregates.

View Complete Details

Yes, I am interested!

Joint Sealants
Interested in this product?
Get Best Quote

Joint Sealants

Get Latest Price

Surface of ApplicationCeramic
Grade StandardChemical Grade
FeaturesImpact Resistant, Water Resistant

With an objective to fulfill the demands of our clients, we are engaged in providing a wide array of Joint Sealants

 

Features & Benefits:

  • Flexible industrial floor joint filler
  • Two component, semi rigid polyurethane composite joint filler
  • Tough performance reduces floor joint repairs & maintenance
  • Support the joint and reduces spalling of the edges

Typical Applications

  • Control, construction and isolation joints in industrial & Commercial floors.

 

View Complete Details

Yes, I am interested!

Reebol
Interested in this product?
Get Best Quote

Reebol

Rs 99 / LitreGet Latest Price

We are leading suppliers, and exporters of broad assortment of Construction Chemicals including Reebol. It is one of the most extensively chemicals used for surface treatment of concrete. It has an excellent ability of stripping form work as well as moulds to ensure flawless surface of concrete. It reduces surface cleaning of shutters prior to use and can also be used with steam curing. We offer this at leading industry rates to our clients.
Features:
Accurate composition
Long shelf life
 
Applications :-
It is also being used as a Shuttering oil

View Complete Details

Yes, I am interested!

Polysulphide Sealants
Interested in this product?
Get Best Quote

Polysulphide Sealants

Rs 150 / KilogramGet Latest Price

BrandBuildcon
Grade StandardChemical Grade

We have earned huge appreciations for harbouring a competitive range of sealants including Polysulphide Sealant, which is widely used for sealing joints in flyovers, concrete road bridges, slabs, water tanks, swimming pools, nuclear reactor tanks and pipe lines. Wide usage has been made possible due to the property of resistance to water and chemicals. It has very high thermal flexibility as well.

Features:

Exceptional thermal flexibility

Wide usage

Resistant to chemicals and water


Areas of Application:

Joints in concrete roads bridges, subways, flyovers & airport runway

Concrete cracks repairs in slab

Joints in water retaining structures like water tank, swimming pool, aqueducts, dams, canals & reservoirs

Atomic nuclear power station reactors domes

Joints between pipe lines

Roof light joints

For expansion joints in Industrial, commercial or residential buildings. Mainly used for sealing horizontal joints, joint sealants


Characteristic:

Can withstand in fully submerged condition

Good chemical & water resistance

Adhesion compatible to most of substrate

Suitable for potable water after full cure

Very high thermal flexibility

Very high service life

Excellent UV resistance after full cure is over

Finishing and Cleaning:

Finish the joint by using wooden batten soaked in soap water or white spirit from time to time. Clean tools and tackles using solvent.



Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)

View Complete Details

Yes, I am interested!

Sodium Gluconate
Interested in this product?
Get Best Quote

Sodium Gluconate

Rs 70 / KgGet Latest Price

UsageIndustrial
Physical StatePowder
FormPowder

With sincerity and hard work of our professionals, we have carved a niche for ourselves in this domain by offering premium quality gamut of Sodium Gluconate.

 

Other detals:

Sodium gluconate is the sodium salt of gluconic acid, produced by fermentation of glucose. It is a white to tan, granular to fine, crystalline powder, very soluble in water. Non corrosive, non toxic and readily biodegradable (98% after 2 days), sodium gluconate is more and more appreciated as chelating agent.

The outstanding property of sodium gluconate is its excellent chelating power, especially in alkaline and concentrated alkaline solutions. It forms stable chelates with calcium, iron, copper, aluminium and other heavy metals, and in this respect, it surpasses all other chelating agents, such as EDTA, NTA and related compounds.

Aqueous solutions of sodium gluconate are resistant to oxidation and reduction, even at high temperatures. However, it is easily degraded biologically (98% after 2 days), and thus presents no wastewater problem.

Sodium gluconate is also a highly efficient set retarder and a good plasticiser / water reducer for concrete, mortar and gypsum.

And last but not least, it has the property to inhibit bitterness in foodstuffs.


Main Functions / Properties

· Excellent chelating agent

· Highly efficient set retarder

· Efficient plasticizer / water reducer

· Bitterness inhibitor

· Non toxic

 

View Complete Details

Yes, I am interested!

Renderoc FC
Interested in this product?
Get Best Quote

Renderoc FC

Get Latest Price

Packaging typePacket
Grade standardTechnical grade
TypeConstruction adhesives & sealants

Product Details:
BrandFosroc
Single part, non shrink, cementitious, crack sealerfor plaster, masonry and concrete

Renderoc FC cementitious, polymer modified, fairing coat is designed for vertical and overhead use to infill honeycombing and voids up to 3 mm deep in the surface of concrete which is not trafficked and is subsequently coated.
Renderoc FC is supplied as a ready to use blend of dry powders requiring only the site addition of clean water to produce a highly consistent cementitious fairing mortar. The material has good handling characteristics, while minimising water demand.The product exhibits excellent thermal compatibility with concrete and is fully compatible with other Renderoc mortars and Dekguard coatings. 

  • Compatibility with non-structural concrete of compressive strength 20 - 35 MPa
  • Polymer-modification provides extremely low permeability to water, carbon dioxide and chlorides
  • Excellent bond to concrete
  • Can be applied quickly and efficiently
  • One component, pre-bagged to overcome site-batched variations
  • Contains no chloride admixtures

Details -

  • Coefficient of thermal expansion: 7 - 12x 10-6/°C
  • Working life:Approximately 20 minutes**
  • Setting time (BS 4550):30 minutes - 1 hour**
  • Fresh wet density:Approximately 2000 kg/m³

View Complete Details

Yes, I am interested!

Nitomortar S Chemical
Interested in this product?
Get Best Quote

Nitomortar S Chemical

Get Latest Price

Product Details:
BrandFosroc

Nitomortar S is a high strength epoxy mortar, based on a high quality solvent-free epoxy resin system. The special silica aggregates provide high strength and excellent abrasion resistance.

Nitomortar S is a three-component material supplied in pre-weighed quantities ready for on-site mixing and use.

  • High ultimate strength — suitable for structural use
  • Early development of strength minimises disruption
  • Abrasion-resistance — suitable for heavily trafficked areas
  • Highly resistant to a wide range of chemicals
  • Cured product is highly impermeable to water when ‘tight trowel’ finished
  • Typically twice as strong as good quality concrete
  • Pre-weighed components ensure consistency

Details -

  • Compressive strength (BS 6319, Pt 2)- 60N/mm2@ 7 days
  • Flexural strength (BS 6319 Pt 3) -20N/mm2 @ 7 days
  • Tensile strength(ASTM C 307) -10N/mm 2@ 7 days
  • Pot life -20 mins @ 35C
  • Initial hardness -24 hours
  • Full cure-7 days

View Complete Details

Yes, I am interested!

Nitotile Grout
Interested in this product?
Get Best Quote

Nitotile Grout

Get Latest Price

Packaging TypePouch
BrandFosroc
FormPowder

Product Details:
BrandFosroc

Nitotile Grout is a blend of specially selected cement, fillers and synthetic organic polymers. When added to water it readily blends to produce a smooth creamy paste which when set is water and mould resistant. Nitotile Grout is used in conjunction with Nitotile* tile adhesives. Standard colours are available.

  • Tropical grade to suit Middle East working conditions.
  • Mould resistant.
  • Thixotropic, non-slump application.
  • One part and only requires water addition.
  • Water-resistant.
  • Can be used in submerged conditions.
  • Available in a range of attractive colours.

details -

Typical Properties of mixed material.

  • Specific Gravity:1.60
  • Pot life @ 27C:30 - 35 min
  • Foot traffic:24  hrs
  • Full cure:21  days

View Complete Details

Yes, I am interested!

Concrete Sealing Compound
Interested in this product?
Get Best Quote
Grade StandardTechnical Grade
UsageIndustrial
Physical Statesolid

In order to keep pace with the never-ending demands of customers, we are involved in offering a wide range of Concrete Sealing Compound.

View Complete Details

Yes, I am interested!

Nitozinc Primer
Interested in this product?
Get Best Quote

Nitozinc Primer

Get Latest Price

BrandFosroc
Packaging Size1 ltr.
FormLiquid

Features:
  • Xylene 10-30% w/w
  • N-Butly acetate 10-30% w/w
  • Aromatic hydrocarbons 0-10% w/w
  • Isobutyl alcohol 0-10% w/w
  • 1 Litre
  • Keep out of reach of children

View Complete Details

Yes, I am interested!

Renderoc Plug
Interested in this product?
Get Best Quote

Renderoc Plug

Rs 50 / KilogramGet Latest Price

Rapid setting cement based, water leak plugging mortar

Uses
For the rapid temporary patching and plugging of concrete segments, concrete and brick tunnel linings, sewage systems, below ground access chambers, pipes, basements, foundations and mines.

Advantages
  • Emergency water - stopping capability
  • Single component - only the addition of clean water is required.
  • Excellent bond to the substrate
  • Low exotherm minimises thermal cracking
  • Pre-packed formulation to overcome variation in site batching
  • Coins no chloride admixtures.
Description

Renderoc Plug is supplied as a ready to use blend of dry powders which requires only the addition of clean water at site to produce a highly consistent, rapid setting mortar which is easy to apply in many difficult conditions. The material is based on a blend of cements, graded aggregates, special fillers and chemical additives which control the rate of set and minimise the risk of thermal cracking.

View Complete Details

Yes, I am interested!

Protective Coatings
Interested in this product?
Get Best Quote

Protective Coatings

Get Latest Price

ApplicationIndustrial Use
Main MaterialPolyurethane
Application MethodSpray

With our vast experience & knowledge in this field, we are engaged in providing a quality-assured range of Protective Coatings.

 

Other Details:

We have mastered ourselves in offering a wide range of products including Protective Coatings, which are known for their excellent finish and scratch resistant surfaces. The coatings can be used for external and internal surfacing as well. They are used on surfaces prone to scratches, marking or chipping. We have a huge transportation network for enabling us with the smooth delivery of bulk orders.

Features:

  • Scratch resistant
  • Smooth
  • Durable

View Complete Details

Yes, I am interested!

PU Sealant
Interested in this product?
Get Best Quote

PU Sealant

Rs 600 / 600 mlGet Latest Price

PU Sealant is a one-part, High modulus, moisture curing Polyurethane Adhesive/Sealant with extremely high thixotropy and high strength.

Once extruded it cures by reaction to the atmospheric moisture to form a high performance, permanently flexible elastic adhesive.

It is particularly suited to bonding applications in the manufacture of trucks, trailers and equipment.

Main Features & Advantages

  • Permanently flexible
  • Bonds and seals at the same time
  • Adhesion to a wide range of substrates
  • Replaces rivets and mechanical fasteners
  • High modulus and high strength properties
  • Very high thixotropy for good gap-filling properties
  • Initial load bearing capacity
  • Shock/impact resistant
  • capable of withstanding high dynamic stresses
  • Increases torsional stiffness of final assembly
  • Vibration and sound damping properties
  • Sandable and paintable
  • Excellent weather and water resistance

View Complete Details

Yes, I am interested!

Sodium Naphthalene Formaldehyde SNF
Interested in this product?
Get Best Quote

Sodium Naphthalene Formaldehyde SNF

Rs 85 / KgGet Latest Price

Minimum Order Quantity: 500 Kg

Grade Standardindustrial grade
Physical StatePowder

With our in-depth knowledge of this domain, we are actively engaged in providing an excellent quality range of Sodium Naphthalene Formaldehyde.

 

Other Details

Backed by our hard-earned experience of this industry, we are involved in offering excellent quality Sodium Naphthalene Sulphonate Formaldehyde. Offered chemical is processed in our vendors' modern processing unit utilizing high grade chemical compound and contemporary processing techniques. Extensively used in pre-stress, bridge deck to keep the ratio of water and cement to minimum, the chemical achieve the degree of workability necessary to provide easy placement and consolidation. Apart from this, our quality examiner test Sodium Naphthalene Sulphonate Formaldehyde in order to ensure that it is pure and non-toxic.

Features

Longer shelf life

Resistance to alkali

Accurate composition

Purity


Product Description

High Range Water-Reducing Admixture.

Sodium Naphthalene Sulphonate Formaldehyde, Poly Naphthalene Sulfonate Formaldehyde Condensate, Concrete Admixture.

Use

SNF produces concrete with extremely workable characteristics referred to as high slump. PNS also allows concrete to be produced with very low water/cement ratios at low or normal slumps.

View Complete Details

Yes, I am interested!
© Buildcon Infra-Chem Technology. All Rights Reserved (Terms of Use)