X
View Mobile Number78% Response Rate

Our Products

+View All

AAC Blocks

AAC is produced from the common materials lime, sand, cement and water, and a small amount of rising agent. After mixing and molding, it is then autoclaved under heat and pressure to create its unique properties. AAC has excellent thermal insulation and acoustic absorption properties. AAC is fire and pest resistant, and is economically and environmentally superior to the more traditional structural building materials such as concrete, wood, brick and stone.

https://buildmakaan.com/

At the point when AAC is blended and cast in structures, a few compound responses occur that give AAC its light weight (20% of the heaviness of cement) and warm properties. Aluminum powder responds with calcium hydroxide and water to frame hydrogen. The hydrogen gas froths and copies the volume of the crude blend making gas rises to 3mm (¿¿¿ inch) in distance across. Toward the end of the frothing procedure, the hydrogen escapes into the air and is supplanted via air.

AAC Blocks is a unique and excellent type of building material due to its super heat, fire and sound resistance, AAC blocks are lightweight and offers ultimate workability, flexibility and durability. Its main ingredients include sand, water, quicklime, cement and gypsum. The chemical reaction due to the aluminum paste provides AAC its distinct porous structure, lightness, and insulation properties, completely different compared to other lightweight concrete materials.

When the forms are removed from the material, it is solid but still soft. It is then cut into either blocks or panels, and placed in an autoclave chamber for 12 hours. During this steam pressure hardening process, when the temperature reaches 190° Celsius (374° Fahrenheit) and the pressure reaches 8 to 12 bars, quartz sand reacts with calcium hydroxide to form calcium silicate hydrate, which gives AAC its high strength and other unique properties. Because of the relatively low temperature used AAC blocks are not considered fired brick but a lightweight concrete masonry unit. After the autoclaving process, the material is ready for immediate use on the construction site. Depending on its density, up to 80% of the volume of an AAC block is air. AAC's low density also accounts for its low structural compression strength. It can carry loads of up to 8 MPa (1,160 PSI), approximately 50% of the compressive strength of regular concrete.

+ Read More

  • Autoclaved Aerated Concrete Gray Rough Square Light Weight AAC Blocks
  • Autoclaved Aerated Concrete Gray Rough Square Light Weight AAC Blocks
  • Autoclaved Aerated Concrete Gray Rough Square Light Weight AAC Blocks
  • Autoclaved Aerated Concrete Gray Rough Square Light Weight AAC Blocks
  • Autoclaved Aerated Concrete Gray Rough Square Light Weight AAC Blocks
  • Autoclaved Aerated Concrete Gray Rough Square Light Weight AAC Blocks
  • Autoclaved Aerated Concrete Gray Rough Square Light Weight AAC Blocks
  • Autoclaved Aerated Concrete Gray Rough Square Light Weight AAC Blocks
  • Autoclaved Aerated Concrete Gray Rough Square Light Weight AAC Blocks
  • Autoclaved Aerated Concrete Gray Rough Square Light Weight AAC Blocks
  • Autoclaved Aerated Concrete Gray Rough Square Light Weight AAC Blocks
Interested in this product?
Get Best Quote

Autoclaved Aerated Concrete Gray Rough Square Light Weight AAC Blocks

₹ 3,150/ Cubic MeterGet Latest Price

Minimum Order Quantity: 10 Cubic Meter

Product Brochure Watch Video

ShapeSquare
MaterialAutoclaved Aerated Concrete
Usage/ApplicationSide Walls
Product TypeBlocks
DesignRough
ColorGray
For Use InSide Walls
For Use inPartition Walls
Block TypeLightweight
Weight7 kg
Strength7mpa
Size9 In. X 4 In. X 3 In.
Precision Tolerance Height9
Precision Tolerance Length25
Precision Tolerance Width4

AAC (Aerated Autoclaved Concrete) is a technology developed in the mid-1920s by the Swedes. The aerating is caused by a reaction of a mix of various materials mainly consisting of silica (through fly-ash), quicklime, cement and others. AAC blocks consist of around 80% air, this aerated material is processed through autoclaving which entails high pressurised curing of aerated materials formed in cellular shapes, which are known as AAC elements. These elements can be further classified into blocks, wall/floor/roof panels and lintels. The AAC blocks are used as a substitute for the conventional building masonry and have been widely accepted globally because of their beneficial properties such as light weight, thermal and sound insulation, mould resistance and other benefits which ease the process of construction. Not only that, but these precast building elements are environment friendly as their processing hardly causes pollution and also boasts the consumption of fly ash which is waste material. AAC material is being used throughout industrial, commercial and residential structures for different applications such as external and internal walls, roofs, other partitions and divisions.

View Complete Details

Yes, I am interested!

  • Ambuja Plus Cool Wall AAC Blocks
  • Ambuja Plus Cool Wall AAC Blocks
  • Ambuja Plus Cool Wall AAC Blocks
  • Ambuja Plus Cool Wall AAC Blocks
  • Ambuja Plus Cool Wall AAC Blocks
  • Ambuja Plus Cool Wall AAC Blocks
  • Ambuja Plus Cool Wall AAC Blocks
  • Ambuja Plus Cool Wall AAC Blocks
Interested in this product?
Get Best Quote

Ambuja Plus Cool Wall AAC Blocks

₹ 63/ PieceGet Latest Price

Minimum Order Quantity: 15 Piece

Product Brochure Watch Video

Usage/ApplicationSide Walls
ColorGrey
ShapeCubical
Thickness4
DesignHollow
MaterialFly Ash
For Use inPartition Walls
Weight8 kg
Strength7.5 mpa
Size12 In. X 4 In. X 2 In.
Ambuja brand25 inch

AAC (Aerated Autoclaved Concrete) is a technology developed in the mid-1920s by the Swedes. The aerating is caused by a reaction of a mix of various materials mainly consisting of silica (through fly-ash), quicklime, cement and others. AAC blocks consist of around 80% air, this aerated material is processed through autoclaving which entails high pressurised curing of aerated materials formed in cellular shapes, which are known as AAC elements. These elements can be further classified into blocks, wall/floor/roof panels and lintels. The AAC blocks are used as a substitute for the conventional building masonry and have been widely accepted globally because of their beneficial properties such as light weight, thermal and sound insulation, mould resistance and other benefits which ease the process of construction. Not only that, but these precast building elements are environment friendly as their processing hardly causes pollution and also boasts the consumption of fly ash which is waste material. AAC material is being used throughout industrial, commercial and residential structures for different applications such as external and internal walls, roofs, other partitions and divisions. Ambuja cool wall Ambuja plus cool wall Ambuja aac blocks

View Complete Details

Yes, I am interested!

  • Ambuaj Fly Ash Blocks
  • Ambuaj Fly Ash Blocks
  • Ambuaj Fly Ash Blocks
  • Ambuaj Fly Ash Blocks
  • Ambuaj Fly Ash Blocks
Interested in this product?
Get Best Quote

Ambuaj Fly Ash Blocks

₹ 65/ PieceGet Latest Price

Product Brochure Watch Video

Size12 In. X 4 In. X 2 In.
Usage/ApplicationPartition Walls
ColorGrey
ShapeCuboidal
MaterialFly Ash
BrandAmbuja
For Use inSide Walls
Resistance DurabilityWater Resistant, Heat Resistant, Fire Resistant
Eco FriendlyYes
Transport AvailableYes
Deals WithinPAN India
Sample AvailableYes
I Deal InNew Only
Country of OriginMade in India

Ambuja Cement has recently launched an innovative green building offering– Ambuja Plus Cool Walls – for Individual Home Builders (IHBs) in Raipur. The revolutionary product with ‘Heat Barrier Technology’ ensures maintenance of a 5° C temperature difference indoors; no matter how hot or cold the external temperature is; thus saving energy.

This greener alternative made of aerated autoclaved concrete blocks is also stronger than any ordinary wall and less dense. In fact, this is the first time that a leading cement manufacturer has offered a masonry solution addressing the needs of the diverse and unorganised IHB segment.
Commenting on the advanced offering, our MD & CEO Ajay Kapur said, “Since our inception, innovation has been the hallmark of all our offerings and we have always endeavoured to develop an array of eco-friendly products to ensure a healthier, cleaner and greener tomorrow; supporting India’s efforts to become a green nation. Ambuja Plus Cool Walls reinforces our strong commitment towards introducing products that deliver high strength and performance while strongly integrating sustainability traits.”

“The product gives multiple benefits of superior strength and durability as well as ensures ambient temperature in the house. We are confident that this new product will provide further impetus to our Group’s vision,” added Mr Kapur.

The launch in Raipur follows an excellence response in Gujarat, Punjab and Himachal Pradesh where it was unveiled last year.

Whilst the B2B segments have over the years gradually advanced with more efficient building solutions afforded by concrete blocks and fly ash bricks, the IHB segment that drives 70% of the construction demand annually still strongly considers the brick masonry work as the mainstay of a home building process, which negatively impacts the environment, as it uses fertile topsoil.

With Raipur weather is characterised with a tropical wet and dry climate, and the summer months sometimes recording as high as 48 degree celsius, Ambuja Plus Cool Walls will prevent the heat from entering into the walls. The product enhances the life of house paint and will not have efflorescence which is a very common phenomenon with brick wall.

At a time when ‘global warming’ is becoming a major concern for emerging economies like India, the product, which has been developed by Ambuja’s in-house, provides thermal insulation. Traditionally, clay brick walls need to be cured whereas Ambuja Plus Cool Walls with heat-resistant concrete blocks and Blockol (Block Jointing Mortar) does not require curing, thereby saving huge quantities of water during the construction process; and also reduces the hassles faced by the consumer.

The innovative product demonstrates yet another initiative by Ambuja Cement to contribute towards sustainability as it not only reduces CO2 emissions’ footprint; saves energy and water.

View Complete Details

Yes, I am interested!

  • Aerated Autoclaved Concrete, Size: 4x8x9x10, Thickness: 4
  • Aerated Autoclaved Concrete, Size: 4x8x9x10, Thickness: 4
  • Aerated Autoclaved Concrete, Size: 4x8x9x10, Thickness: 4
  • Aerated Autoclaved Concrete, Size: 4x8x9x10, Thickness: 4
  • Aerated Autoclaved Concrete, Size: 4x8x9x10, Thickness: 4
  • Aerated Autoclaved Concrete, Size: 4x8x9x10, Thickness: 4
  • Aerated Autoclaved Concrete, Size: 4x8x9x10, Thickness: 4
Interested in this product?
Get Best Quote

Aerated Autoclaved Concrete, Size: 4x8x9x10, Thickness: 4

₹ 3,300/ Cubic MeterGet Latest Price

Minimum Order Quantity: 15 Cubic Meter

Product Brochure Watch Video

Thickness4
Density Kg Per Cube M600
Size4x8x9x10
ColorGray
Compressive Strength7
Country of OriginMade in India

  • AAC (Aerated Autoclaved Concrete) Blocks are eco friendly, cost effective alternatives to conventional wall brick materials.
  • These blocks are manufactured from common and abundant natural raw materials producing finished product twice in volume of the raw materials used, making them extremely resource-efficient and eco-friendly.


Additional Information:

  • Delivery Time: same day

View Complete Details

Yes, I am interested!

  • Ambuja Rough Concrete Building Blocks, Size: 12 In. X 4 In. X 2 In., Side Walls
  • Ambuja Rough Concrete Building Blocks, Size: 12 In. X 4 In. X 2 In., Side Walls
  • Ambuja Rough Concrete Building Blocks, Size: 12 In. X 4 In. X 2 In., Side Walls
  • Ambuja Rough Concrete Building Blocks, Size: 12 In. X 4 In. X 2 In., Side Walls
  • Ambuja Rough Concrete Building Blocks, Size: 12 In. X 4 In. X 2 In., Side Walls
Interested in this product?
Get Best Quote
Brandambuja
Usage/ApplicationPartition Walls
ShapeCuboid
Thickness4
DesignRough
Density Kg Per Cube M600
MaterialAutoclaved Aerated Concrete
Product TypeBlocks
For Use inSide Walls
Size12 In. X 4 In. X 2 In.

We are involved in manufacturing, exporting and supplying the splendid quality Concrete Building Blocks to our precious clients. The offered blocks are precisely manufactured making use supreme quality concrete with the aid of modern machines under the direction of deft professionals. By quality auditors duly scan these blocks on strict parameters to eliminate any kind of defect. These blocks enhance the grace of interior and exterior of buildings, hotels, restaurants, homes, offices and other similar places.
Features:

Weather resistance Crack resistance Easy to clean Strength & Durability
Sizes of Blocks:
16"X8"X417"X8"X416"X8"X6

Additional Information:

  • Delivery Time: same day

View Complete Details

Yes, I am interested!

  • Ambuja AAC Blocks a AAC Blocks
  • Ambuja AAC Blocks a AAC Blocks
  • Ambuja AAC Blocks a AAC Blocks
  • Ambuja AAC Blocks a AAC Blocks
  • Ambuja AAC Blocks a AAC Blocks
  • Ambuja AAC Blocks a AAC Blocks
  • Ambuja AAC Blocks a AAC Blocks
  • Ambuja AAC Blocks a AAC Blocks
  • Ambuja AAC Blocks a AAC Blocks
Interested in this product?
Get Best Quote

Ambuja AAC Blocks a AAC Blocks

₹ 4,450/ Cubic MeterGet Latest Price

Minimum Order Quantity: 15 Cubic Meter

Product Brochure Watch Video

Brandambuja
Size12 In. X 4 In. X 2 In.
Usage/ApplicationSide Walls
ShapeRectangular
DesignSolid
MaterialAutoclaved Aerated Concrete
Product TypeBlocks
ColorGray

Ambuja Plus Cool Walls Cement Bricks, Size: 6x9x24Ambuja Plus Cool Walls

Can Cement keep your house cool?
Of course, with Ambuja's temperature r
Ambuja Cements Ltd, one of India’s leading cement manufacturers, has launched an innovative green building offering for Individual Home Builders (IHBs) – Ambuja Plus Cool Walls’. The revolutionary product with ‘Heat Barrier Technology’ maintains a 5° C temperature difference indoors - no matter how hot or cold the external temperature is - thus saving energy.

Commenting on the launch, Ambuja Cement MD & CEO Ajay Kapur said, “Ever since our inception, innovation has been the hallmark of all our offerings. The introduction of Ambuja Plus Cool Walls reinforces our strong commitment towards delivering high strength, performance and sustainable development.

We are confident that this new product will provide further impetus to our vision so that the “World Builds Better”. This is yet another step towards environmental friendly construction. We are very excited to see the enthusiasm of the construction fraternity to our offerings,” added Mr Kapur.

Following the excellent response to Ambuja Plus Cool Walls in Gujarat, the product has now been launched in Punjab and Himachal Pradesh recently. In the next few months, it will also be introduced in different markets across the country.

Whilst the B2B construction segment has evolved with efficient building solutions like concrete blocks and fly ash bricks, the IHB segment (comprising ~70% of construction demand annually) still depends on brick masonry during the home building process. However, this has an environmental impact, as it uses fertile soil. Also it gives rise to efflorescence on clay brick walls.

Ambuja’s Chief Marketing Officer Sanjay Kumar Gupta said, “Developed by Ambuja’s in-house team, Ambuja Plus Cool Walls is a cleaner and greener offering to the IHB community. At a time when ‘global warming’ is becoming a major concern for emerging economies like India, Ambuja Plus Cool Walls is equipped with ‘Heat Barrier Technology’, that helps maintain a temperature difference of at least 5 °C.

About Ambuja Plus Cool Walls
• A complete solution to build a house that can withstand temperature variations and keep the interiors of a home at a comfortable temperature
• Traditionally, clay brick walls need to be cured, whereas, Ambuja Plus Cool Walls does not require curing, thereby saving huge quantities of water during the construction process; and also reduces the hassles faced by the consumer.
• Ambuja Plus Cool Walls is made of heat-resistant concrete blocks and Blockol – Block Jointing Mortar - for joining these blocks.
• Ambuja Plus Cool Walls are stronger than walls made from any other material

About Ambuja Cement
Ambuja Cements Ltd, a part of the global conglomerate LafargeHolcim, is one of the leading cement companies in the Indian cement industry. Operating for over 30 years, Ambuja has proved to be the best cement for construction and the best cement manufacturing company in India with its uniquely sustainable development projects. Its environment friendly initiatives have played a key role in India’s efforts to become a green state. The sustainable constructions and renewable energy projects undertaken by it have a lion’s share in creating a blueprint for sustainable development in India’s bright future. Currently, Ambuja has a cement capacity of 29.65 million tonnes with five integrated cement manufacturing plants and eight cement grinding units across the country.



Additional Information:

  • Delivery Time: 24 hours

View Complete Details

Yes, I am interested!

  • Ambuja Cool Wall Blocks, Size: 600mm X 200mm X 225
  • Ambuja Cool Wall Blocks, Size: 600mm X 200mm X 225
  • Ambuja Cool Wall Blocks, Size: 600mm X 200mm X 225
  • Ambuja Cool Wall Blocks, Size: 600mm X 200mm X 225
  • Ambuja Cool Wall Blocks, Size: 600mm X 200mm X 225
  • Ambuja Cool Wall Blocks, Size: 600mm X 200mm X 225
  • Ambuja Cool Wall Blocks, Size: 600mm X 200mm X 225
  • Ambuja Cool Wall Blocks, Size: 600mm X 200mm X 225
Interested in this product?
Get Best Quote

Ambuja Cool Wall Blocks, Size: 600mm X 200mm X 225

₹ 4,350/ Cubic MeterGet Latest Price

Product Brochure Watch Video

Density Kg Per Cube M50
ColorGray
Compressive Strength1200
For Use inPartition Walls
Size9 In. X 4 In. X 3 In.
I deal inNew Only
BrandAmbuja
Country of OriginMade in India

Ambuja Cements Ltd, one of India’s leading cement manufacturers, has launched an innovative green building offering for Individual Home Builders (IHBs) – Ambuja Plus Cool Walls’. The revolutionary product with ‘Heat Barrier Technology’ maintains a 5° C temperature difference indoors - no matter how hot or cold the external temperature is - thus saving energy.

Commenting on the launch, Ambuja Cement MD & CEO Ajay Kapur said, “Ever since our inception, innovation has been the hallmark of all our offerings. The introduction of Ambuja Plus Cool Walls reinforces our strong commitment towards delivering high strength, performance and sustainable development.

We are confident that this new product will provide further impetus to our vision so that the “World Builds Better”. This is yet another step towards environmental friendly construction. We are very excited to see the enthusiasm of the construction fraternity to our offerings,” added Mr Kapur.

Following the excellent response to Ambuja Plus Cool Walls in Gujarat, the product has now been launched in Punjab and Himachal Pradesh recently. In the next few months, it will also be introduced in different markets across the country.

Whilst the B2B construction segment has evolved with efficient building solutions like concrete blocks and fly ash bricks, the IHB segment (comprising ~70% of construction demand annually) still depends on brick masonry during the home building process. However, this has an environmental impact, as it uses fertile soil. Also it gives rise to efflorescence on clay brick walls.

Ambuja’s Chief Marketing Officer Sanjay Kumar Gupta said, “Developed by Ambuja’s in-house team, Ambuja Plus Cool Walls is a cleaner and greener offering to the IHB community. At a time when ‘global warming’ is becoming a major concern for emerging economies like India, Ambuja Plus Cool Walls is equipped with ‘Heat Barrier Technology’, that helps maintain a temperature difference of at least 5 °C.

About Ambuja Plus Cool Walls
• A complete solution to build a house that can withstand temperature variations and keep the interiors of a home at a comfortable temperature
• Traditionally, clay brick walls need to be cured, whereas, Ambuja Plus Cool Walls does not require curing, thereby saving huge quantities of water during the construction process; and also reduces the hassles faced by the consumer.
• Ambuja Plus Cool Walls is made of heat-resistant concrete blocks and Blockol – Block Jointing Mortar - for joining these blocks.
• Ambuja Plus Cool Walls are stronger than walls made from any other material

About Ambuja Cement
Ambuja Cements Ltd, a part of the global conglomerate LafargeHolcim, is one of the leading cement companies in the Indian cement industry. Operating for over 30 years, Ambuja has proved to be the best cement for construction and the best cement manufacturing company in India with its uniquely sustainable development projects. Its environment friendly initiatives have played a key role in India’s efforts to become a green state. The sustainable constructions and renewable energy projects undertaken by it have a l
Popular cements and building materials always focused on innovative and quality products. Autoclaved aerated concrete (aac) is a fully integrated building system of panels and blocks that are used for residential, commercial and industrial buildings. Aac, a light-weight green building material, is fire resistant and has good thermal insulation, solid structure and is easy to work with. We have vital role to introduce aac blocks in the kerala market in years ago. Popular cements and building materials provide free and fast delivery of high quality aac blocks across gurgaon

Additional Information:

  • Delivery Time: same day

View Complete Details

Yes, I am interested!

  • Cement Concrete Light Weight Block
  • Cement Concrete Light Weight Block
  • Cement Concrete Light Weight Block
  • Cement Concrete Light Weight Block
  • Cement Concrete Light Weight Block
  • Cement Concrete Light Weight Block
Interested in this product?
Get Best Quote

Cement Concrete Light Weight Block

₹ 60/ PieceGet Latest Price

Product Brochure Watch Video

ShapeRectangular
MaterialAutoclaved Aerated Concrete
Usage/ApplicationSide Walls
Product TypeBlocks
For Use inPartition Walls
Size12 In. X 4 In. X 2 In.

Our cherished clients can get from us the best assortment of supreme quality Cement Concrete Light Weight Block. Keeping in mind various requirements of our clients, our highly skilled professionals perfectly manufacture these blocks making use of quality tested cement at our production house. These blocks are widely used in the construction of homes, offices and for flooring purpose. Our offered blocks are widely in demands owing to their dimensional accuracy and sturdy structure.
Features: build makaan
Crack resistancehigh load bearing capacityHigh strength Sizes of Blocks:
16"X8"X417"X8"X416"X8"X6

View Complete Details

Yes, I am interested!

  • Blocks Rectangular Rough Autoclaved Aerated Concrete AAC Ash Ambuja Cool Wall Block
  • Blocks Rectangular Rough Autoclaved Aerated Concrete AAC Ash Ambuja Cool Wall Block
  • Blocks Rectangular Rough Autoclaved Aerated Concrete AAC Ash Ambuja Cool Wall Block
  • Blocks Rectangular Rough Autoclaved Aerated Concrete AAC Ash Ambuja Cool Wall Block
  • Blocks Rectangular Rough Autoclaved Aerated Concrete AAC Ash Ambuja Cool Wall Block
  • Blocks Rectangular Rough Autoclaved Aerated Concrete AAC Ash Ambuja Cool Wall Block
Interested in this product?
Get Best Quote

Blocks Rectangular Rough Autoclaved Aerated Concrete AAC Ash Ambuja Cool Wall Block

₹ 65/ PieceGet Latest Price

Minimum Order Quantity: 15 Piece

Product Brochure Watch Video

MaterialAutoclaved Aerated Concrete
BrandAmbuja
Usage/ApplicationSide Walls
Thickness4
Density Kg Per Cube M700
Size4x8x25
ShapeRectangular
DesignRough
Product TypeBlocks
ColorAsh
Block TypeRectangular
Compressive Strength6

Ambuja Cements Ltd, part of the global conglomerate LafargeHolcim and one of the leading cement manufacturers in India, launched an innovative green building offering – Ambuja Plus Cool Walls – for Individual Home Builders (IHBs) in Raipur.

The revolutionary product with ‘Heat Barrier Technology’ ensures maintenance of a 5-degree C temperature difference indoors; no matter how hot or cold the external temperature is; thus saving energy. This greener alternative made of aerated autoclaved concrete blocks is also stronger than any ordinary wall and less dense. In fact, this is the first time that a leading cement manufacturer has offered a masonry solution addressing the needs of the diverse and unorganised IHB segment.

Commenting on the launch of this advanced offering, Ambuja Cement MD and CEO Ajay Kapur said, “Since our inception, innovation has been the hallmark of all our offerings and we have always endeavoured to develop an array of eco-friendly products to ensure a healthier, cleaner and greener tomorrow; supporting India’s efforts to become a green nation. Ambuja Plus Cool Walls reinforces our strong commitment towards introducing products that deliver high strength and performance while strongly integrating sustainability traits.”

He adds, “The product gives multiple benefits of superior strength and durability as well as ensures ambient temperature in the house.”

The launch in Raipur follows an excellent response in Gujarat, Punjab and Himachal Pradesh where it was unveiled last year.

According to Ambuja Cement, “Whilst the B2B segments have over the years gradually advanced with more efficient building solutions afforded by concrete blocks and fly ash bricks, the IHB segment that drives 70 per cent of the construction demand annually still strongly considers the brick masonry work as the mainstay of a home building process, which negatively impacts the environment, as it uses fertile topsoil.”

With Raipur weather is characterised with a tropical wet and dry climate, and the summer months sometimes recording as high as 48-degree C, the Ambuja Plus Cool Walls will prevent the heat from entering into the walls. The product enhances the life of house paint and will not have efflorescence which is a very common phenomenon with brick wall.

Ambuja Cement’s Technical Services Head Umesh Soni said, “Developed by Ambuja’s in-house team, Ambuja Plus Cool Walls is a cleaner and greener offering to the home builders’ community. At a time when ‘global warming’ is becoming a major concern for emerging economies like India, the product is equipped with ‘Heat Barrier Technology’, an innovative green building property that provides thermal insulation.”

Traditionally, clay brick walls need to be cured whereas Ambuja Plus Cool Walls with heat-resistant concrete blocks and Blockol (Block Jointing Mortar) does not require curing, thereby saving huge quantities of water
during the construction process; and also reduces the hassles faced by the consumer.



Additional Information:

  • Delivery Time: 1

View Complete Details

Yes, I am interested!

  • Ambuja AAC Block
  • Ambuja AAC Block
  • Ambuja AAC Block
  • Ambuja AAC Block
  • Ambuja AAC Block
  • Ambuja AAC Block
  • Ambuja AAC Block
  • Ambuja AAC Block
Interested in this product?
Get Best Quote

Ambuja AAC Block

₹ 65/ PieceGet Latest Price

Product Brochure Watch Video

Usage/ApplicationSide Walls
ColorGrey
ShapeCubical
DesignHollow
MaterialFly Ash
Brandambuja
Size12 In. X 4 In. X 2 In.

Ambuja Cement has recently launched an innovative green building offering– Ambuja Plus Cool Walls – for Individual Home Builders (IHBs) in Raipur. The revolutionary product with ‘Heat Barrier Technology’ ensures maintenance of a 5° C temperature difference indoors; no matter how hot or cold the external temperature is; thus saving energy.

This greener alternative made of aerated autoclaved concrete blocks is also stronger than any ordinary wall and less dense. In fact, this is the first time that a leading cement manufacturer has offered a masonry solution addressing the needs of the diverse and unorganised IHB segment.
Commenting on the advanced offering, our MD & CEO Ajay Kapur said, “Since our inception, innovation has been the hallmark of all our offerings and we have always endeavoured to develop an array of eco-friendly products to ensure a healthier, cleaner and greener tomorrow; supporting India’s efforts to become a green nation. Ambuja Plus Cool Walls reinforces our strong commitment towards introducing products that deliver high strength and performance while strongly integrating sustainability traits.”

“The product gives multiple benefits of superior strength and durability as well as ensures ambient temperature in the house. We are confident that this new product will provide further impetus to our Group’s vision,” added Mr Kapur.

The launch in Raipur follows an excellence response in Gujarat, Punjab and Himachal Pradesh where it was unveiled last year.

Whilst the B2B segments have over the years gradually advanced with more efficient building solutions afforded by concrete blocks and fly ash bricks, the IHB segment that drives 70% of the construction demand annually still strongly considers the brick masonry work as the mainstay of a home building process, which negatively impacts the environment, as it uses fertile topsoil.

With Raipur weather is characterised with a tropical wet and dry climate, and the summer months sometimes recording as high as 48 degree celsius, Ambuja Plus Cool Walls will prevent the heat from entering into the walls. The product enhances the life of house paint and will not have efflorescence which is a very common phenomenon with brick wall.

At a time when ‘global warming’ is becoming a major concern for emerging economies like India, the product, which has been developed by Ambuja’s in-house, provides thermal insulation. Traditionally, clay brick walls need to be cured whereas Ambuja Plus Cool Walls with heat-resistant concrete blocks and Blockol (Block Jointing Mortar) does not require curing, thereby saving huge quantities of water during the construction process; and also reduces the hassles faced by the consumer.

The innovative product demonstrates yet another initiative by Ambuja Cement to contribute towards sustainability as it not only reduces CO2 emissions’ footprint; saves energy and water.

View Complete Details

Yes, I am interested!

  • AAC Block Construction
  • AAC Block Construction
  • AAC Block Construction
  • AAC Block Construction
  • AAC Block Construction
  • AAC Block Construction
  • AAC Block Construction
Interested in this product?
Get Best Quote

AAC Block Construction

₹ 3,100/ Cubic MeterGet Latest Price

Minimum Order Quantity: 15 Cubic Meter

Product Brochure Watch Video

Service Location/Citynorth india
Built TypePanel Build
MaterialAcrylic
2200
1100
2300

  • Aerocon AAC Blocks offers everything you''re looking for
  • Manufactured using Fly Ash, Cement, Lime & Aeration agent
  • Product conforms to IS 2185 Part-3
  • Excellent substitute for clay bricks and hollow/solid concrete blocks
  • Green Building Product

 

Towards a green future with Aerocon AAC Blocks

  • Aerocon is India''s leading manufacturer of autoclaved aerated concrete blocks an amazingly innovative and green building material
    What make it superior is its incredible lightweight and insulation properties. About 1/3rd the density of clay brick, these can be laid much quicker, saving time and building costs
    Being more resilient to damage helps reduce wastage during transportation
    These blocks offer effective & practical solutions for the current building regulations and are manufactured using the latest technologies at India''s most advanced MC facilities located in Chennai & Surat
  • Construction using Aerocon AAC Blocks boosts up the project by ensuring at least 6-7 LEED green building certification points.

 

Why use Aerocon AAC Blocks

  • Energy saving and eco-friendly; helps reduce carbon
    footprint
    Manufactured from recycled material with zero wastage
    Quicken up construction by up to 30%
    Dimensionally accurate & easy workability

 

Factory finished with the superb surface finish; easily accepts renders & plasters

  • Use of standard tools to cut, saw, chisel, drill & shape
  • Unmatched properties
  • Super lightweight; 1/3rd the density of clay bricks
  • Non-combustible with superior fire resistance
  • Exceptional thermal & acoustic insulation
  • No cavity construction; eliminates termites, rodents, pests & fungal growth
  • Guaranteed savings
  • Reduces foundation load of the building up to 30%
  • Reduces power consumption by 27%
  • Steel & Cement savings by 18% & 12% respectively


The Aerocon advantage*

  • We provide technical support for lightweight walling-based structural design
  • Advise on the handling, storage and efficient use of these products so as to minimise wastage, and thereby costs

 

Advise on the construction of walls
  • Recommended/Correct practices
  • Training of supervisors and masons
  • Site audit & feedback process on walling work


Additional Information:

  • Delivery Time: same day

View Complete Details

Yes, I am interested!

  • Fly Ash AAC Blocks, 24 in x 8 in x 8 in
  • Fly Ash AAC Blocks, 24 in x 8 in x 8 in
  • Fly Ash AAC Blocks, 24 in x 8 in x 8 in
  • Fly Ash AAC Blocks, 24 in x 8 in x 8 in
  • Fly Ash AAC Blocks, 24 in x 8 in x 8 in
  • Fly Ash AAC Blocks, 24 in x 8 in x 8 in
  • Fly Ash AAC Blocks, 24 in x 8 in x 8 in
  • Fly Ash AAC Blocks, 24 in x 8 in x 8 in
Interested in this product?
Get Best Quote

Fly Ash AAC Blocks, 24 in x 8 in x 8 in

₹ 50/ PieceGet Latest Price

Minimum Order Quantity: 15 Piece

Product Brochure Watch Video

BrandAmbuja
Size24 in x 8 in x 8 in
ShapeAll Shape
Usage/ApplicationSide Walls
ColorGrey
DesignSolid
MaterialFly Ash
Transport AvailableYes
Deals WithinState
Sample AvailableYes
I Deal InNew Only
Country of OriginMade in India

utoclaved Aerated Concrete (AAC), also known as Autoclaved Cellular Concrete (ACC), Autoclaved Lightweight Concrete (ALC) building material invented in the mid-1920s that simultaneously provides structure, insulation, and fire and mould resistance. AAC is a highly thermal insulating concrete based material used for both internal and external construction and are Light weight, Energy efficient, Fire and Sound Proof, Easy to install and Environmentally Green products as it is Ecological and Recyclable product. Higher Strength to Weight Ratio, Seismic Resistance, Precision, Breakages.

AAC Blocks are unique and excellent type of building materials offers ultimate workability, flexibility and durability. AAC has excellent thermal insulation and acoustic absorption properties. It is fire and pest resistant, and is economically and environmentally superior to the more traditional structural building materials such as concrete, wood, brick and stone.

Our AAC Blocks in the name of CONECC are manufactured using the finest grade (Class F) fly ash and other raw materials and specifications as below.

 

Advantages:

  • More carpet area is available in built up area due to lesser widths of walling and cladding with 100/150 or 200mm against in case of conventional brick masonry.
  • Fast returns on investment due to speedy construction, saving in Cement, Steel construction supervision cost, construction time, water requirements for construction, timber required for centering /shuttering etc.
  • Uniform quality due to mass production in the factory. Due to high insulation properties of Autoclaved Aerated Concrete, there will be substantial saving in installation and recurring cost of air conditioning units.
  • AAC Blocks are wire cut & are having plain surface. In view of this, the Plaster for internal walls is not required & directly Putty & Painting can be done, saving the plastering cost. However, External Plastering is recommended for AAC Blocks.
  • Light Weight and Earthquake resistant also comfortably worked and highly insulating and less water penetration and environmental friendlily also Fire resistant and incombustible.

Disadvantages:
  • Brittle nature: they need to be handled more carefully than clay bricks to avoid breakages.
  • Fixings: the brittle nature of the blocks requires longer thinner screws when fitting cabinets and wall hangings and wood-suitable drill bits or hammering in. Special, large diameter wall plugs are available, though at a higher cost than common wall plugs.
  • Insulation requirements would require very thick walls when using AAC alone. Thus many builders choose to return to traditional building methods installing an extra layer of insulation around the building.

Other Details:
    Size in MMNo of Blocks per CuM
    600 x 200 x 100mm83.33
    600 x 200 x 150mm55.55
    600 x 200 x 200mm41.57


    Additional Information:

    • Delivery Time: 48 hours

    View Complete Details

    Yes, I am interested!

    • Aac Blocks For Sale
    • Aac Blocks For Sale
    • Aac Blocks For Sale
    • Aac Blocks For Sale
    • Aac Blocks For Sale
    • Aac Blocks For Sale
    Interested in this product?
    Get Best Quote

    Aac Blocks For Sale

    ₹ 3,189/ Cubic MeterGet Latest Price

    Minimum Order Quantity: 15 Cubic Meter

    Product Brochure Watch Video

    Size12 In. X 4 In. X 2 In.
    MaterialConcrete
    Brandjk ambuja laxmi jindal
    Usage/ApplicationSide Walls
    Density Kg Per Cube M600
    ShapeRectangular
    Thickness4
    DesignRough
    Product TypeBlocks
    ColorGray
    Country of OriginMade in India

    build makaan provides AAC Blocks are a cost-effective and environment-friendly substitute for red clay bricks as a build makaan construction material for making walls. Approximate 80% of volume in AAC Blocks is air, making its weight less than a third of clay bricks.
    Magicrete Building Solutions is India's frontline manufacturer of Lightweight concrete (AAC) blocks, a technology that has turned over a new leaf in the construction industry. A pioneer in green building materials, we were founded with a vision of introducing prefabricated construction technologies to the Indian construction and infrastructure industry and over the years, we have regarded as a frontline producer of these blocks with two manufacturing units in Gujarat and Haryana covering the strategic markets of west and north India respectively.
    Magicrete was founded in 2008 by Alumni of some of the most prominent technical institutes in India including IIT Delhi, IIT Kharagpur, and IIT Lucknow. With 800,000 CBM per annum production capacity and nationwide presence in AAC Fly Ash Blocks Market.



    Additional Information:

    • Delivery Time: next day

    View Complete Details

    Yes, I am interested!

    • Square Solid Blocks Concrete Block Wall
    • Square Solid Blocks Concrete Block Wall
    • Square Solid Blocks Concrete Block Wall
    • Square Solid Blocks Concrete Block Wall
    • Square Solid Blocks Concrete Block Wall
    Interested in this product?
    Get Best Quote

    Square Solid Blocks Concrete Block Wall

    ₹ 55/ PieceGet Latest Price

    Minimum Order Quantity: 20 Piece

    Product Brochure Watch Video

    Size12 In. X 4 In. X 2 In.
    Usage/ApplicationSide Walls
    ShapeSquare
    DesignSolid
    MaterialAutoclaved Aerated Concrete
    Product TypeBlocks
    Compressive Strength6
    Resistance DurabilityFire Resistant
    Breakage2
    ColorGray
    Country of OriginMade in India

    About 80 percent of an AAC block is air, so it barely weighs a third of a clay brick. Aluminium with blended proportion of cement, gypsum, fly ash and lime gives it its honey-comb structure. It is then further processed under extreme steam pressure to attain the required strength. Our best in class products saves around 30% of construction time, reducess the dead load of the building by one-third and saves 15-20% of construction cost. Available in a wide range of thicknesses and sizes, our products are manufactured following strict IS codes for quality norms.

    Additional Information:

    • Delivery Time: next day

    View Complete Details

    Yes, I am interested!

    • Ambuja Cool Wall Aac Blocks
    • Ambuja Cool Wall Aac Blocks
    • Ambuja Cool Wall Aac Blocks
    • Ambuja Cool Wall Aac Blocks
    • Ambuja Cool Wall Aac Blocks
    • Ambuja Cool Wall Aac Blocks
    • Ambuja Cool Wall Aac Blocks
    Interested in this product?
    Get Best Quote

    Ambuja Cool Wall Aac Blocks

    ₹ 4,450/ Cubic MeterGet Latest Price

    Minimum Order Quantity: 15 Cubic Meter

    Product Brochure Watch Video

    Size12 In. X 4 In. X 2 In.
    ShapeRectangular
    Brandambuja
    MaterialAutoclaved Aerated Concrete
    Product TypeBlocks
    DesignRough

    Autoclaved Aerated Concrete is a Lightweight, Load-bearing, High-insulating, Durable building product, which is produced in a wide range of sizes and strengths. AAC Blocks is lightweight and compare to the red bricks AAC blocks are three times lighter.

    Ambuja Cement has recently launched an innovative green building offering– Ambuja Plus Cool Walls – for Individual Home Builders (IHBs) in Raipur. The revolutionary product with ‘Heat Barrier Technology’ ensures maintenance of a 5° C temperature difference indoors; no matter how hot or cold the external temperature is; thus saving energy.
    This greener alternative made of aerated autoclaved concrete blocks is also stronger than any ordinary wall and less dense. In fact, this is the first time that a leading cement manufacturer has offered a masonry solution addressing the needs of the diverse and unorganised IHB segment.
    Commenting on the advanced offering, our MD & CEO Ajay Kapur said, “Since our inception, innovation has been the hallmark of all our offerings and we have always endeavoured to develop an array of eco-friendly products to ensure a healthier, cleaner and greener tomorrow; supporting India’s efforts to become a green nation. Ambuja Plus Cool Walls reinforces our strong commitment towards introducing products that deliver high strength and performance while strongly integrating sustainability traits.”
    “The product gives multiple benefits of superior strength and durability as well as ensures ambient temperature in the house. We are confident that this new product will provide further impetus to our Group’s vision,” added Mr Kapur.
    The launch in Raipur follows an excellence response in Gujarat, Punjab and Himachal Pradesh where it was unveiled last year.
    Whilst the B2B segments have over the years gradually advanced with more efficient building solutions afforded by concrete blocks and fly ash bricks, the IHB segment that drives 70% of the construction demand annually still strongly considers the brick masonry work as the mainstay of a home building process, which negatively impacts the environment, as it uses fertile topsoil.
    With Raipur weather is characterised with a tropical wet and dry climate, and the summer months sometimes recording as high as 48 degree celsius, Ambuja Plus Cool Walls will prevent the heat from entering into the walls. The product enhances the life of house paint and will not have efflorescence which is a very common phenomenon with brick wall.
    At a time when ‘global warming’ is becoming a major concern for emerging economies like India, the product, which has been developed by Ambuja’s in-house, provides thermal insulation. Traditionally, clay brick walls need to be cured whereas Ambuja Plus Cool Walls with heat-resistant concrete blocks and Blockol (Block Jointing Mortar) does not require curing, thereby saving huge quantities of water during the construction process; and also reduces the hassles faced by the consumer.

    The innovative product demonstrates yet another initiative by Ambuja Cement to contribute towards sustainability as it not only reduces CO2 emissions’ footprint; saves energy and water. 



    Additional Information:

    • Delivery Time: next day

    View Complete Details

    Yes, I am interested!

    • AAC Blocks Suppliers In Gurgaon
    • AAC Blocks Suppliers In Gurgaon
    • AAC Blocks Suppliers In Gurgaon
    • AAC Blocks Suppliers In Gurgaon
    • AAC Blocks Suppliers In Gurgaon
    • AAC Blocks Suppliers In Gurgaon
    • AAC Blocks Suppliers In Gurgaon
    • AAC Blocks Suppliers In Gurgaon
    Interested in this product?
    Get Best Quote

    AAC Blocks Suppliers In Gurgaon

    ₹ 3,100/ Cubic MeterGet Latest Price

    Minimum Order Quantity: 12 Cubic Meter

    Product Brochure Watch Video

    Size24 in x 8 in x 8 in
    Usage/ApplicationPartition Walls
    ColorGrey
    ShapeCuboidal
    DesignSolid
    Resistance DurabilityFire Resistant, Heat Resistant, Water Resistant
    Country of OriginMade in India

    Solid in nature ,AAC blocks we are providing of one of the best leading brand ,JK lakshmi Smart blocks         Magic Blox AAC Blocks are a cost-effective and environment-friendly substitute for red clay bricks as a construction material for making walls. Approximately 80% of the volume in AAC Blocks is air, making its weight less than a third of clay bricks.

     

    Features of AAC Blocks:

     Saves AC bill by 30%

     4x faster construction than traditional bricks

     Excellent sound insulation- reduces sound up to 44 dB.

     60% reduction in the use of Mortar – AAC bricks are big and require fewer joints

     Standardized manufacturing

     High Fire Resistance- almost twice that of clay bricks

     Is 100% Green Building Material, consumes 0% soil, and is made from Fly Ash, a Thermal Power Plant waste.



    Additional Information:

    • Delivery Time: same day

    View Complete Details

    Yes, I am interested!

    • Light Weight Bricks Cost
    • Light Weight Bricks Cost
    • Light Weight Bricks Cost
    • Light Weight Bricks Cost
    • Light Weight Bricks Cost
    Interested in this product?
    Get Best Quote

    Light Weight Bricks Cost

    ₹ 50/ PieceGet Latest Price

    Minimum Order Quantity: 20 Piece

    Product Brochure Watch Video

    BrandACC
    ColorGray
    Usage/ApplicationPartition Walls
    MaterialFly Ash
    Coverage AreaCUM
    Size12 In. X 4 In. X 2 In.
    For Use InSide Walls

    BuildMakaan:-Backed by the assistance of our experienced professionals, we have been the prominent manufacturer and supplier of a qualitative range of Lightweight AAC Blocks. buildmakaan.com The provided block is manufactured by our adept professionals using the best quality autoclaved aerated concrete mixture and modern technology. Offered block is highly demanded by our precious clients owing to its sturdiness and durable finish. Furthermore, our clients can avail this block from us at most affordable price.

    Features:

    • Fine finish
    • Less water absorption
    • Moisture resistance
    Backed by the assistance of our experienced professionals, we have been the prominent manufacturer and supplier of a qualitative range of Lightweight AAC Blocks. The provided block is manufactured by our adept professionals using the best quality autoclaved aerated concrete mixture and modern technology. Offered block is highly demanded

    Additional Information:

    • Delivery Time: next Day

    View Complete Details

    Yes, I am interested!

    • Cement Bricks And Blocks
    • Cement Bricks And Blocks
    • Cement Bricks And Blocks
    • Cement Bricks And Blocks
    • Cement Bricks And Blocks
    • Cement Bricks And Blocks
    Interested in this product?
    Get Best Quote

    Cement Bricks And Blocks

    ₹ 55/ PieceGet Latest Price

    Product Brochure Watch Video

    Usage/ApplicationPartition Walls
    ColorGray
    MaterialCement
    BrandACC
    For Use inSide Walls
    Resistance DurabilityFire Resistant
    Eco FriendlyYes
    I Deal InNew Only
    Automation GradeAutomatic
    Size12 In. X 4 In. X 2 In.
    Country of OriginMade in India

    Being a sole concern organization, we are engaged in offering a huge assortment of Cement Bricks. At our well-equipped manufacturing unit, the offered bricks are manufactured using premium quality cement in tandem with set international industry standards and norms. Stringently examined on numerous parameters by quality controllers, the provided blocks are extensively demanded across the globe by our clients to construct floors and walls. Our patrons can buy these bricks in accurate dimension at pocket friendly prices.

    Features:

    High load bearing capacity

    Excellent finish

    Temperature resistance

     
    Sizes:

    230mm x 110mm x 75mm (9" x 4" x 3")

    230mm x 150mm x 100mm (9" x 6" x 4")

    View Complete Details

    Yes, I am interested!

    Get in touch with us

    Reach Us

    Build Makaan ( A Unit Of Swastik Traders )Shop No. 12, Ullawsh Village, Gurugram, opp Banni City Center, Gurgaon-122001, Haryana, India

    Bhupander Deswal (CEO)

    View Mobile Number78% Call Response Rate

    Send SMS
    Send Email
    Send Payment
    Leave a Message, we will call you back!
    Send your enquiry to this supplier
    terms privacy policy

    We Accept Online Payments

    All Rights Reserved (Terms of Use)