Have a requirement?
Get Best Price
Heat Resisting paint
Lumeros 123 HR Aluminium Paint
Rs 290 / LitreGet Latest Price
Features:
- Easy drying formulation
- Soluble in thinner
- Easy application
- Homogeneous and viscous liquid
- Rust resistant formulation
- Glossy finish
Product Details:
- Type: Single Pack
- Composition: Silicone resin and aluminium
- Application: Brush or Conventional Spray
- Recommended DFT: 15-20 Microns per coat
- Theoretical Spreading Rate: 10-12.5 Sq. Mtr./Ltr
Drying Time:
- Touch : 3-4 hours
- Hard : Overnight
Overcoating Interval: Minimum 24 hours
- Flash Point: Above 25°C
- Colour: Aluminium
- Packing: 20 Ltrs
- Thinner/Cleaner: Thinner 800
- Finish: Bright Metallic
Temperature Resistance:
- Continuous: 250 to 500°Cdry heat
Weatherability: Excellent
Flexibility: Moderate
Abrasion Resistane: Moderate
View Complete Details
Luxol Lustre Finish Paint
Rs 220 / LitreGet Latest Price
Berger Luxol Lustre Finish Paint is an excellent sheen finish for interior walls in the solvent base range. It has inherent property for building a tough film, which has outstanding washable property. It is long lasting solvent based paint for all interior walls. It gives glow finish like pearl. It is based on specially formulated alkyd resin with micro fine pigments and extenders with some special type additives and solvents. It can provide orange peel finish on wall with the help of yellow texture roller with 5% dilution.
USP: Pearl glow, tough film with much better washability.
Coverage:
On non-porous, smooth, primed metal surface | New surface | Old surface | |
By brush application | 1 coat | 19-22 sq. mtr | 20-25 sq. mtr |
2 coats | 10-13 sq. mtr | 10-12 sq. mtr |
View Complete Details
Superset Auto Finishes Paint
Rs 300 / LitreGet Latest Price
Type | Fast setting special Synthetic Resin and High Quality Pigments. |
Features | High Quality Exterior Enamel. |
Recommended Use | High Quality Fast drying Enamel for Automobile. It gives high gun gloss, gloss and colour retention. |
Product Data | |
Colours | As per Esdee’s Enamel Shade card |
Specific Gravity | 0.90 to 1.20 depending on the shade |
Finisih | Smooth and glossy |
Viscosity/FC4/30°C | 90 + or – 10 Sec on F .C. B-4 |
Glossy | Full Glossy |
Drying | Surface Dry; 15 Mts Tack Free:4 Hrs Max. Hard Dry: Overnight |
Flash Point | Above 30 Deg.C |
Application Data | |
Application | By spray |
Thinner | Superset THINER 112 OR 113 |
Performance Data (after Full cure as a system) | |
Adhesioa | No cracking or loss of adhesion on ¼ mandrel |
Theoretical Sperading | 10-15 Sq.M/L at 25-30 microns depending on the shades |
Remarks | 1.Stir well before use 2.Apply on properly prepared surface. use primers like super auto oil primer or syncoat metal primer followed by autocoat primers surfacer or syncoat S.K primers surfacer, cellocoat or autocoat N C putty and then superset auto finish to get the best results. 3.Also available in the range are clear, sparkle colours. |
Packing | 20 ltrs 4 ltrs, 1 ltrs and 500 ML,200, 100 & 50 ML. |
View Complete Details
Ferrotol HR Aluminium Paint
Rs 190 / LitreGet Latest Price
Features:
- Easy to apply on the metallic surfaces
- Liquid formulation
- Prevents rust
- Liquid formulation
- Easy to apply
- Viscous
Recommended for use outside storage tanks, pipes, stacks, ducting radiators, boiler fronts, chimneys as well as structural steel, etc. A two pack high lustre aluminium paint possessing excellent durability and weather resistant properties. The product is designed to withstand a constant working temperature of 250 degree celsius and can also be used as a heat reflectant coating.
Product Details:
- Type: Dual pack- paste and medium separate.
- Composition: Oleoresinous medium with leafing aluminium
- Application: Brush or Conventional Spray
- Recommended DFT: 15-20 Microns per coat
- Theoretical Spreading Rate: 19.0-25.3 Sq. Mtr./Ltr
Drying Time:
- Touch : 4 hours
- Handle : 6-8 hours
- Hard : Overnight
Overcoating Interval: Overnight
- Flash Point: Above 30°C
- Colour: Aluminium
- Packing: 20 Ltrs
- Thinner/Cleaner: Thinner 800
- Finish: Bright Metallic
Temperature Resistance:
- Continuous: 250°C Max
Weatherability: Excellent
Flexibility: Excellent
Abrasion Resistane: Moderate
View Complete Details
Epilux 78 HBTL White Tank Liner Paint
Rs 300 / LitreGet Latest Price
Features:
- Prevent corrosion of metallic objects
- Easy to apply on the substrates
- Fine finish
- Easy mixing with other liquids
- Chemical formulation
- Dilute
Product Details:
- Type: Two Pack, cured with Amine Adduct
- Composition: Catalysed epoxy resin suitably pigmented
- Mixing Ratio: Base: Catalyst-3:1 by volume
- Pot Life:6-8 Hours
- Application: Brush, Airless or Conventional Spray
- Recommended DFT: 100-150 Microns per coat
- Corresponding WFT: 182-273 Microns per coat
- Theoretical Spreading Rate: 3.7-5.5 Sq. Mtr./Ltr/Coat
Drying Time:
- Touch : 2-3 hours
- Handle : 6-8 hours
- Hard : Overnight
- Curing Time: 7 days minimum
Overcoating Interval:
- Min : Overnight
- Max: 5 days
- Flash Point: Above 22°C
- Finish: Matt to Egg Shell
- Packing: 20 Ltrs
- Thinner/Cleaner: Thinner 844
Temperature Resistance:
- Continuous : 93°C
- Intermittent: 120°C
- Flexibility: Moderate
- Abrasion Resistane: Very Good
View Complete Details
Ferrotol Stack Black Paint
Rs 150 / LitreGet Latest Price
Features:
- Dries to become a uniform layer
- Easy to apply
- Longer service life
- Liquid formulation
- Easy to apply on the substrates
- Optimal adhesion
Product Details:
- Type: Single Pack
- Composition: Bituminous medium suitably pigmented
- Application: Brush
- Recommended DFT: 30-40 Microns per coat
- Recommended WFT: 68-91 Microns per coat
- Theoretical Spreading Rate: 11.0-14.7 Sq. Mtr./Ltr.
Drying Time:
- Touch : 4 hours
- Handle : 6-8 hours
- Hard : Overnight
Overcoating Interval: Minimum 24 hours
- Flash Point: Above 30°C
- Colour: Black
- Packing: 20 Ltrs
- Thinner/Cleaner: Thinner 800
- Finish: Semi-glossy
Temperature Resistance:
- Continuous: 250°C dry heat
Weatherability: Excellent in general industrial environment
Flexibility: Good
Abrasion Resistane: Moderate
View Complete Details
need
details