C. K. Trading Company

This machine is designed for blind hemming, skip stitching, and edge finishing on fabrics where the stitch should not show on the garment’s face — commonly used in waistbands, pants hems, skirts, dresses, and lining edges.

• Machine Type: Industrial blind stitch machine

• Stitch Function: Blind stitch + skip stitch options

• Drive: Usually Direct-Drive Servo Motor (energy efficient, precise control)

• Needles: Specialized blind stitch needle system

• Feed Mechanism: Differential feed / compound feed depending on model

• Stitch Quality: Clean, nearly invisible stitching on the outside

• Lubrication: Automatic oiling (if standard spec)

• Speed: Moderate to high (servo controlled)

• Power: Single phase

✔ Blind Stitch

• Used for almost invisible hems on pants, skirts, dresses, and professional garments

• Only a few threads visible on garment face — great for formalwear

✔ Skip Stitch

• Skips stitches at programmed intervals for comfort stretch zones, decorative effect, or functional flexibility

• Useful in stretch fabrics and activewear

• Trousers / pants hems

• Skirt and dress hems

• Cuff hems on sleeves

• Blinds / curtains (in some cases)

• Formal wear finishing

• Professional invisible hemming — export quality finish

• Skip stitch flexibility for stretch/fashion fabrics

• Servo drive control = better accuracy & power savings

• Stable stitching over long production runs

• Lower operator dependency than manual hemming

The LJ-4404PMD-D is an industrial 4 Needle cylinder bed with puller machine complete set. It’s designed for accurate, high-speed sewing with less operator effort and lower operating cost.

• Machine Type: Industrial cylinder bed machine.

• Drive: Direct-Drive Servo Motor (energy-efficient, precise control)

• PMD Features: Enhanced presser foot lift/drop or programmable presser control

• Needle System: Standard industrial (DBx1)

• Stitch Length: Adjustable

• Lubrication: Automatic oiling system

• Speed: High-speed production (servo controlled)

• Noise & Vibration: Reduced due to servo drive

• Knitwear & woven garments

• Light workwear

• Home textiles (curtains, pillowcases)

• Basic assembly stitching

• Consistent stitch quality in production

• Smooth start/stop via servo drive

• Automatic presser control reduces operator fatigue

• Low maintenance compared to clutch motor machines

• Quieter & energy-efficient

The LJ-4404P-D is an industrial single-needle lockstitch sewing machine with a direct-drive servo motor, designed for stable, high-speed stitching with good stitch quality and energy-efficient operation.

• Machine Type: Industrial straight lockstitch (single needle)

• Drive: Direct-Drive Servo Motor — quiet, efficient, smooth control

• Needle System: DBx1 (standard industrial needle)

• Stitch Length: Adjustable

• Lubrication: Automatic oiling system

• Speed: High-speed servo-controlled stitching

• Noise & Vibration: Lower than clutch-motor machines

• Power: Single phase

Great for straight lockstitch tasks on:

• Shirts & tops

• Knit & woven garments

• Light to medium fabrics

• Home textiles (curtains, pillowcases)

• Basic garment assembly operations

• Smooth and stable stitching for production runs

• Energy saving compared to clutch motor models

• Low noise & vibration — better operator comfort

• Less maintenance due to servo direct drive

• Reliable performance for daily industrial use

LEJIANG heat presses are commonly used in garment factories and printing units for reliable, continuous work. They’re suitable for DTF, sublimation, HTV, and logo/label fixing.

• Type: Flat heat press (manual / semi-auto)

• Plate size: 15×15", 15X32" (most common)

• Temperature range: up to 230–250°C

• Controller: Digital temperature & time control

• Pressure: Heavy-duty adjustable pressure system

• Heating plate: Teflon-coated / even heat distribution

• Power: ~1.8–2.5 kW, single phase

• Build quality: Industrial body, long-life heater

• DTF transfers

• Sublimation printing

• Heat transfer vinyl (HTV)

• T-shirts, sweatshirts, uniforms

• Neck labels & logos

• Manual flat model: ₹18,000 – ₹28,000

• Swing-away / heavy-duty: ₹25,000 – ₹45,000

(Price depends on plate size, controller quality, and seller)

• Good heat consistency

• Strong pressure for thick transfers

• Better durability compared to no-name local machines

• Suitable for small factories & startup units

LEJIANG LJ-1411PXP-D Multi-Needle Front Placket Machine

The LEJIANG LJ-1411PXP-D is a special-purpose multi-needle industrial sewing machine designed specifically for front placket stitching in shirts, T-shirts, polo shirts, and uniforms. It ensures parallel, perfectly spaced stitches with high production speed.

• Machine type: Multi-needle front placket machine

• Needles: Multi-needle (commonly 2–3 needles, model-dependent)

• Drive: Direct Drive (servo motor)

• Placket width: Adjustable with guide set

• Stitch type: Parallel lockstitch

• Lubrication: Automatic oiling system

• Speed: High-speed industrial operation

• Noise & vibration: Low

• Power: Single phase

• Shirt front plackets

• Polo T-shirt plackets

• Uniform & corporate wear

• Knit & light woven fabrics

LEJIANG LJ-1509P-D Multi-Needle Belt Attaching Machine

The LEJIANG LJ-1509P-D is a special-purpose multi-needle industrial sewing machine used for attaching waist belts / waistbands in garments with perfect parallel stitching and high production speed.

• Machine type: Multi-needle belt (waistband) attaching machine

• Needles: Multi-needle (commonly 3–4 needles, model dependent)

• Drive: Direct Drive (servo motor)

• Stitch type: Parallel lockstitch

• Belt width: Adjustable with guide set

• Lubrication: Automatic oiling system

• Speed: High-speed industrial operation

• Noise & vibration: Very low

• Power: Single phase

• Trouser & pant waistbands

• Jeans & casual trousers

• Uniforms & workwear

• Light to medium woven fabrics

• Clean, parallel waistband stitching

• Uniform belt width & strong seam

• Much faster than single-needle method

• Reduced skill requirement

• Consistent export-quality finish

• Ideal for mass production lines

LEJIANG LJ-1408PL-D-1/4 Piping Attaching Machine (Track Pant)

The LEJIANG LJ-1408PL-D-1/4 is a special-purpose industrial sewing machine designed for attaching piping (side piping) on track pants, sportswear, and uniforms with high accuracy and speed.

• Machine type: Piping attaching machine

• Piping size: 1/4 inch (pre-set guide)

• Drive: Direct Drive (servo motor)

• Needle: Single needle (industrial standard)

• Lubrication: Automatic

• Speed: High-speed, smooth operation

• Noise & vibration: Very low

• Power: Single phase

• Track pants side piping

• Sportswear & activewear

• School & company uniforms

• Knit and light woven fabrics

• Perfect alignment of piping

• Clean, professional finish

• Faster than manual piping attachment

• Consistent stitch quality

• Less operator skill required

• Ideal for bulk production

This machine is not for general garment construction but for specific, high-stress seams:

• Denim & Jeans: Specifically the inseams and outseams (the thick, double-stitched "felled" seams).

• Workwear: Heavy-duty overalls, fatigue clothes, and jackets.

• Outdoor Gear: Tents, raincoats, and heavy canvas bags

• Shirts: Side seams and under-arm seams on high-quality dress shirts

This machine is not for general garment construction but for specific, high-stress seams:

• Denim & Jeans: Specifically the inseams and outseams (the thick, double-stitched "felled" seams).

• Workwear: Heavy-duty overalls, fatigue clothes, and jackets.

• Outdoor Gear: Tents, raincoats, and heavy canvas bags

• Shirts: Side seams and under-arm seams on high-quality dress shirts

LEJIANG LJ-2000C-D Belt Loop Making Machine

The LEJIANG LJ-2000C-D is an industrial belt loop making machine used in garment factories to form, fold, and cut belt loops automatically for trousers, jeans, uniforms, and similar garments.

• Function: Automatic belt loop forming & cutting

• Drive: Direct Drive (servo motor) – energy saving, low noise

• Operation: Semi-automatic, easy feeding

• Loop width: Adjustable (commonly 15–25 mm)

• Loop length: Adjustable as per garment requirement

• Fabric support: Denim, cotton, twill, polyester blends

• Build quality: Heavy-duty industrial body

• Control: Foot pedal / electronic control

• Jeans & denim trousers

• Formal trousers & uniforms

• Shorts, skirts

• Export garment production lines

• Uniform belt loop size & folding

• High production speed vs manual method

• Reduced manpower & rejection

• Clean finish suitable for export quality

• Stable performance for continuous use

• High output (hundreds of loops per hour, operator dependent)

• Consistent quality throughout long shifts

LEJIANG LJ-8842-D Industrial Sewing Machine

The LEJIANG LJ-8842-D is a direct-drive industrial lockstitch sewing machine, widely used in garment factories for high-speed, continuous stitching with low noise and power consumption.

• Type: Single-needle lockstitch

• Drive: Direct Drive (servo motor built-in)

• Max speed: ~4,000–5,000 SPM

• Stitch length: Up to ~5 mm (adjustable)

• Lubrication: Automatic oiling

• Needle system: DBx1 (common industrial needle)

• Power: Single phase, energy-efficient

• Noise/Vibration: Very low (good for long shifts)

• Shirts, T-shirts

• Trousers, jeans (light–medium)

• Uniforms

• Knit & woven fabrics

• General garment assembly lines

• Electricity saving vs clutch motor

• Faster start/stop, precise control

• Less maintenance

• Operator-friendly

• Stable stitching at high speed

LEJIANG LJ-4408PMD-D Industrial Sewing Machine

The LEJIANG LJ-4408PMD-D is an advanced heavy-duty industrial lockstitch sewing machine with direct-drive servo motor and automatic features designed for high productivity and consistent stitch quality in medium to heavy fabrics.

• Machine Type: Heavy-duty industrial lockstitch sewing machine

• Drive System: Direct Drive (servo motor) — energy-efficient with precise speed control

• Needle System: DBx1 (standard industrial needle system)

• PMD Feature: Typically indicates Presser Motor Drive (automatic presser foot lift/drop or programmable functions)

• Stitch Length: Adjustable

• Lubrication: Automatic oiling system

• Speed: High-speed industrial operation

• Noise & Vibration: Significantly reduced thanks to direct drive

• Power: Single phase

Ideal for straight lockstitch applications in medium to heavy materials such as:

• Denim & jeans

• Canvas, duck cloth

• Workwear & uniforms

• Bags & luggage

• Upholstery and technical textiles

• Higher productivity with smooth servo control

• Automatic presser control helps reduce operator fatigue and improves consistency

• Consistent stitch quality over long runs

• Lower maintenance compared to clutch motor machines

• Strong lockstitch suitable for robust products

The LEJIANG LJ-4406PMD-D is an industrial straight-stitch (lockstitch) sewing machine with direct-drive servo motor and PMD features for improved performance and easier operation. It’s designed for medium to heavy-duty sewing applications where consistent stitch quality and efficiency are important.

• Machine Type: Industrial lockstitch sewing machine

• Drive System: Direct Drive Servo Motor (energy-efficient, quieter, precise control)

• PMD Function: Often refers to Presser Motor Drive / automatic presser foot lift or programmable functions for smoother feeding and operator ease

• Needle System: Standard DBx1 industrial needle

• Stitch Length: Adjustable

• Lubrication: Automatic oiling system

• Speed: High speed (~4,000–5,000 SPM depending on setup)

• Noise & Vibration: Low due to servo drive

• Power: Single phase

This machine is suited for straight lockstitch operations on medium/heavy fabrics including:

• Denim & jeans

• Canvas & duck cloth

• Workwear & uniforms

• Bags & backpacks

• Upholstery

• Technical textiles

• Improved productivity with high-speed servo control

• Consistent stitch quality in long production runs

• Automatic presser foot functions reduce operator effort

• Stronger lockstitch for heavy materials

• Low maintenance and reliable operation

• Energy saving versus clutch motors

The LEJIANG LJ-4406P-D is an industrial single-needle lockstitch sewing machine designed specifically for medium to heavy fabrics. It’s widely used in garment factories, denim workshops, bag makers, and technical textile production where strong, precise stitching is needed.

• Machine Type: Industrial straight-stitch (lockstitch) sewing machine

• Drive: Direct Drive (servo motor) – efficient power usage, smooth control, quiet operation

• Needle System: DBx1 (standard industrial needle system)

• Stitch Length: Adjustable based on fabric and stitch requirements

• Lubrication: Automatic oiling system for longer machine life

• Speed: High-speed production with adjustable servo-driven control

• Noise & Vibration: Low

• Power: Single-phase

Ideal for straight lockstitch applications such as:

• Denim & jeans stitching

• Canvas & duck cloth

• Workwear & uniforms

• Bags, backpacks & accessories

• Upholstery & technical fabrics

• 📈 High productivity with direct-drive servo control

• 🧵 Strong and consistent stitching

• 🔇 Quieter compared to clutch motor machines

• 🔧 Low maintenance with automated lubrication

• 👌 Stable operation over long shifts