Ganpat Metal Corporation

Phosphor Bronze alloys are primarily used for electrical products because they have superb spring qualities, high fatigue resistance, excellent formability and solderability, and high corrosion resistance. The addition of tin increases the corrosion resistance and strength of the alloy. The phosphorous increases the wear resistance and stiffness of the alloy.

Phosphor bronze C544 is on of the finest bearing alloys the industry has to offer. Phosphor Bronze is available in sheet, strip, plate, wire, rod and bar.

 

C51000 PHOSPHOR BRONZE "5% A"

 

C51000 Phosphor Bronze alloy possess a higher yield strength than is readily available in most cast products. Typical applications for phosphor bronze include bearings, bushings, gears, pinions, shafts, thrust washers and valve parts. C51000 Phosphor bronze can be readily brazed or soldered. Capacity for being cold worked is good.

 

C52100 PHOSPHOR BRONZE "8% C"

 

ARCHITECTURE: Bridge Bearing Plates

CONSUMER: Coinage, Cymbals, Power Conductor for Electro-Surgical Pencil

ELECTRICAL: Electrical Connectors, Electronic Connectors, Cold Headed Parts, Electrical Flexing Contact Blades, Electrical Flexing Contact Blades, Wire Brushes, Switch Parts, Fuse Clips

FASTENERS: Fasteners, Heavy Duty, Lock Washers, Cotter Pins

INDUSTRIAL: Springs, Helical Extension, Diaphragms, Doctor Blades, Paper Industry, Bourdon Tubing, Thrust Bearings, Clutch Disks, Welding Wire, Well Drill Equipment, Beater Bar, Springs, Helical Torsion, Clips, Heavy Duty, Gears, Pinions, Bellows, Truss Wire, Sleeve Bushings, Pneumatic Hammers, Cold Headed Parts, Textile Machinery, Perforated Sheets, Chemical Hardware, Springs, Heavy Duty

MARINE: Marine Parts

 

C52400 PHOSPHOR BRONZE "10% D"

 

INDUSTRIAL: Heavy Bars and Plates, Fittings, Expansion Plates for Bridges

 

C54400 PHOSPHOR BRONZE "B-2" "FREE CUTTING"

 

C54400 Phosphor Bronze is the finest bearing alloy that the industry has to offer. It is an extremely machinable alloy that is equalled by few in the wrought metal industry as a bearing alloy. When annealed, this metal can be bent, formed, blanked, and stamped.

 

INDUSTRIAL: Bushings, Gears, Pinions, Shafts, Valve Parts, Sleeve Bearings, Thrust Bearings, Screw Machine Products, Bearings, Thrust Washers

We are manufacturer of brass rods  with wide range of alloy grades and profiled shapes like round, bar , hex and other customized shapes.

Our brass extrusion rods size ranges form 4mm diameter to 100mm as per required material grade.
All our products are compulsarily passed through spectrometer testing for alloy composition testing and hence we guarantee the material grade composition.

Free Cutting Brass Rods

Use: Free Cutting Brass Rod is also known as free machining brass or leaded brass and is mainly used for high speed machining like fasteners, gears, architectural extrusions, automotive engineering parts, etc. as it is corrosion resistance and has excellent machine ability.

Forging Brass Rods

Use: It is mainly used for manufacturing forged components and pressing materials like knobs, hardware’s, handles, valve and fuse bodies, valve components, defence components etc.

High Tensile Brass Rods

Use: High Tensile Brass Rods are also know as Manganese Brass and is used in manufacturing components like welding rods, valves, marine components, pump rods, etc. due to its high strength and resistance to corrosion.

Lead Free Brass Rods

Use: These rod are also known as Reverting Quality Brass Rod and is mainly used in blanking, riveting, bending, hot forging, watch case and belts, etc. 

Ti 6Al-4V ELI

 GANPAT METAL CORPORATION is a professional Mineral & Metallurgy manufacturer and have been exporting raw materials for more than 40 years. Our company has import and export rights, providing high quality products in many fields. With excellent quality and professional services, we have won the trust and support of more than 1000 customers worldwide. 

One of the most commonly used titanium alloys is an alpha-beta alloy containing 6% Al and 4% V. This alloy, usually referred to as Ti 6Al-4V, exhibits an excellent combination of corrosion resistance, strength and toughness. Typical uses include medical devices or implants, aerospace applications and pressure vessels. In the case of medical applications, stringent user specifications require controlled microstructures and freedom from melt imperfections. The interstitial elements of iron and oxygen are carefully controlled to improve ductility and fracture toughness. Controlled interstitial element levels are designated ELI (extra low interstitials). Hence the designation Ti 6Al-4V ELI.

The 1950's saw the first use of titanium in orthopedic applications and now titanium is the standard material of choice for orthopedic devices such as hip joints, bone screws, knee joints, spinal fusion cages, shoulder and elbow joints, and bone plates.

Titanium has been selected as a metal of choice in the orthopedic segment of the market because it is inert in the human body, it is resistant to attack body fluids, has proven to be compatible with bone density, is strong and has a low modulus, hence making it an excellent material of choice in the orthopedic arena.

Applications

Fort Wayne Metals manufactures Ti 6Al-4V ELI in straightened and cut bar, coil, strands and cables, flat wire and wire form to support a variety of critical medical and industrial based applications. End uses include:

• Orthopaedic pins and screws
• Springs
• Orthopaedic cables
• Surgical staples
• Orthodontic appliances
• Ligature clips

 

Typical Chemistry

 

 

 

 

 

 

Additional Information:

• Delivery Time: within 7-20 days
• Packaging Details: wooden case or according to your demands

GANPAT METAL CORPORATION has a huge inventory of over a million pounds of copper round bar (rod).  We offer them in a variety of thicknesses and widths according to your specifications. We offer fast delivery and our professional sales team is ready to assist you with your material needs.  

 
C10200 OXYGEN FREE COPPER

Top of Form

 

UNS CDA 102, ASTM B152, ASTM B187, ASTM B272 

High Conductivity (OFHC) Copper characteristics are high ductility, high electrical and thermal conductivity, high impact strength, good creep resistance, ease of welding, and low volatility under high vacuum.

 

TYPICAL USES FOR C10200 OXYGEN FREE COPPER: 

 

ELECTRICAL: Electrical Conductors, Klystrons, Microwave Tubes, Transistor Components, Lead In Wire, Coaxial Cables, Copper to Glass Seals in Electronic Appliances, Busbars, Bus Conductors, Wave Guides

 

INDUSTRIAL: Tubing, LP Gas Service, Tubing, Medical Gas- Oxygen, Vacuum Seals, Coaxial Tube, Billet Mold Tube, Extrusion Cans for Powder Metallurgy

 

 Sizes Available From NBM

 RECTANGLES / FLAT BAR . . . .  1/8” – 2” thick through ½” – 8” wide

SQUARE BAR . . . . . . . . . . . . . . . .  1/4” – 2” Square

ROUND BAR . . . . . . . . . . . . . . . . .  3/16” – 15” Diameter                

 

C10100 OXYGEN FREE ELECTRONIC COPPER

Top of Form

 

C10100 Oxygen-Free Electronic Copper is a 99.99% pure copper with 0.0005% oxygen content. C101 achieves a minimum 101% IACS conductivity rating. This copper is finished to a final form in a carefully regulated, oxygen-free environment. C10100 has HIgh Ductility, High electrical and termal conductivity and low volatility under high vacume.

 

 

Typical uses for C10100 Oxygen Free Electronic Copper: 

 

AUTOMOTIVE: Automotive Rectifiers

 

ELECTRICAL: Transistor Component Bases, High Resistance-Ratio Cryogenic Shunts, Bus Conductors, Wave Guides, Hollow Conductors, Anodes for Vacuum Tubes, Coaxial Cable, Coaxial Tube, Klystrons, Microwave Tubes, Bus Bars, Lead-in Wire, Vacuum Seals, Conductors, Glass-to-Metal Seals

 

AMS 4590 NICKEL ALUMINUM BRONZE

Top of Form

 

C63020 

Nickel Aluminum Bronze offers high ductility, high electrical and thermal conductivity, high impact strength, good creep resistance, ease of welding, and low volatility under high vacuum.

Typical Uses for AMS 4590 Nickel Aluminum Bronze: 

 

INDUSTRIAL: Bearings, Bushings, Valve Balls, Forming Dies for Roll Bearings, Hydraulic Bushings for Earth Moving Equipment, Valve Parts - Cryogenic

 

 

 

C18150 COPPER CHROMIUM ZIRCONIUM

 

RWMA Class II

Used extensively for cap style resistance welding electrodes. Evidence suggests that it can provide less sticking and resist deformation longer than its copper-chrome counterpart in some specific situations.

Typical Uses for C18150 Copper Chromium Zirconium:

 

CONSUMER: Pencil-type & Light Soldering Guns: Tips, Rod Extensions

 

ELECTRICAL: Resistance Welding Electrodes

 

INDUSTRIAL: Welding Electrodes, Welding Wheels, Tips and Rod Extensions

Additional Information:

• Delivery Time: WITHIN 10-20 DAYS
• Packaging Details: wooden case or according to your demands

Aluminium Grade HE30 6082 T6 

Alloy 6082 is a heat treatable medium-high-strength construction alloy with medium-high fatigue strength. It combines very good corrosion resistance and very good weldability due to its lowered strength values in the welding zone. Good machinability and good cold formability after stabilising heat treatment are its other main benefits. This product is not suitable for complex sections.

Applications:

·         Heavy duty structures in rail coaches, truck frames, ship building, bridges, military bridges and bicycles

·         Masts and beams for ship building

·         Tubes for scaffolding, framework for tents and halls

·         Piping and tubing in machinery