X
I agree to the terms and privacy policy
144188195215245280

HBL Power Systems Limited

Hyderabad, Telangana

| GST  36AAACH8421K1ZI

View Mobile Number
BL Power Systems Ltd. is the pioneer in the design, development and manufacture of specialized batteries and DC systems in India. With over 3 decades of experience in this field, the company offers a wide range of batteries and associated electronics providing its customers, custom built solutions to meet critical requirements...+ Read More

Nature of Business

Manufacturer

GST Number

36AAACH8421K1ZI

Nickel Cadmium Pocket Plate Batteries
For more information
Contact Now

HBL offers a very wide range of nickel cadmium pocket plate batteries that match diverse applications and operating conditions. These are available in tough polypropylene containers of single cell types and block battery types. Cells of stainless steel containers or structural foam moulded containers are also offered as options. Incorporating variations in electrode design to meet different discharge requirements, hbl batteries are classified into three types l, m & h. These batteries conform to iec 60623 and are certified by intertek etl semko. They also conform to bs6260, din 40771 and other international standards.

View Complete Details

Get Best Quote

Nickel Cadmium Sintered Plate Batteries
For more information
Contact Now

Nickel cadmium sintered plate batteries are the power source for independent starting of aircraft engines & emergency backup in the event of generator failure on board aircraft. Hbl aircraft batteries have been approved by the centre for military airworthiness, ministry of defence-govt. Of india, directorate general of civil aviation, india as well as customers in vietnam, czech republic & west asia.

View Complete Details

Get Best Quote

Valve Regulated Lead Acid Batteries
For more information
Contact Now

Triumph HP is a premium design Valve Regulated Lead Acid Battery. The battery works on Gas Recombination Principle with AGM technology and heavy duty Lead Calcium Grids.
Available in a wide range : 80Ah to 5800Ah
Benefits
Does not require water top-up throughout its life
No corrosive fumes and hence no special battery rooms are required
Stackable design minimizes space requirements
Designed for high integrity & long life
Application specific designs
Customized layouts for optimum space utilization
Safe-Explosion-proof, leak-proof & flame-retardant material
Consistent performance over life time
Improved aesthetics
Easy installation
Applications:
Triumph-HP is the best choice for applications where no maintenance and minimal space requirement are of utmost importance.
Telecommunications
Switch Gear
Process Control Systems
Railway Signaling & Communication
Renewable Energy
These Products Conform to:
IEC 60896 part 2

View Complete Details

Get Best Quote

Pure Lead-Tin Vrla Monoblocks
For more information
Contact Now

The Pure Lead-Tin range offers the customer the highest energy density of any lead acid battery anywhere. The battery is constructed around a complex thin plate, pure lead-tin grid which packages more power in a smaller space. The plates being made of high purity lead last longer, offering excellent life. The proven benefits o this superior technology are high performance, quick recharge capability, high energy density and a long service life. The 6V & 12V monoblocs are available in capacities ranging from 12Ah to 150Ah.
Benefits
Maintenance-free and spill-proof. This enables flexible mounting
Wide operating temperature range (-40C to +50C)
High energy density (gravimetric and volumetric)
Good charge retention leading to long storage life
Low internal resistance ensures quick recharge
Excellent high rate capability permits use of smaller capacity batteries
Superior raw materials for good performance and life
Excellent deep discharge recovery characteristics
UL recognized plastic components
These batteries conforms to IEC 60896 and are certified by Intertek ETL SEMKO

View Complete Details

Get Best Quote

Tubular Gel Vrla Batteries
For more information
Contact Now

The solar powered shelters carry batteries that expose them to higher temperatures. Net result is the need for a heavy duty, robust, deep cycling battery that is also less sensitive to high temperature.

To meet such rigors of temperatures and varying patterns of usage, HBL introduces "Tubular Gel VRLA Battery" with unbeatable combination of Tubular plate and gelled electrolyte.

Applications

Wireless: Base Transceiver , station (BTS), Base Switches (MSO), CDMA/3G base stations, Main Switches

Transmission : Fiber optic system, Digital Microwave radi, Satellite earth stations

Switching: Local access switches, Primary exchanges, Central office / Secondary exchange, Point of inter connect switches, Internet & Gateway switches, Telecom Co-location

Applications other that Telecom : Telecommunications, Solar energy systems, Wind energy systems, Power plants and substations, Train lighting, Coach Air conditioning and signaling in Railways, SCADA systems

Features & Benefits : Pressure die-cast spine grids - Longer float life, Very good cycling capability required for Indian conditions, Gelled Electrolyte - Very good heat dissipation, suitable for out - door installation, Antimony - free alloy - Long shelf life , Valve regulated - No water additions during service life, 100% capacity on first discharge. Ready to install, Safe and economical transportation. No free acid, Can be mounted both in horizontal and Vertical orientation , Ideal for Solar powered telecom installations.

View Complete Details

Get Best Quote

Silver Oxide Zinc Batteries
For more information
Contact Now

HBL Silver Oxide Zinc Batteries are used for instant starting of Aircraft Engines and as a back-up power source. Approved by Centre for Military Airworthiness Certification, Ministry of Defence, Govt. of India.

span Silver Oxide Zinc Battery Rating
22.5 Volts, 45 Amp.HR at 1 HR Rate

span Part No: HBL SZ-45

span Application
Mig 21, 23, 25, 27 and 29
KA-25 Helicopter
Light Combat Aircraft (LCA)

View Complete Details

Get Best Quote

Thyristor Controlled Battery Chargers
For more information
Contact Now

HBL Battery chargers uses Thyristor switching principle for achieving the desired DC output. The sophisticated power electronics design and production facilities in the company enables it to meet the specific requirements of its customers.
Extensive Range
Available in a wide range-can be supplied in voltage outputs upto 500VDC and current outputs upto 1500Amps.
Application
These chargers find use in a variety of applications such as Process Control, Telecommunications, Emergency Lighting, Switch Gear Protection, Engine Starting and Power Station Control
Minimal Maintenance
These chargers can work for many years, without any special attention
Long life through design and excellent
thermal management
High Reliability
Superior design and high quality standards ensure absolute reliability of the equipment and fail safe operation Stackable design minimises place requirement and enables faster installation.
User Friendly
Cautiously conceived alarms and annunciations, easily accessible component layout, enable the users to quickly attend to the equipment, in use.

View Complete Details

Get Best Quote

These batteries use Fibre Plate electrodes. The three Dimensional Fibre Structure in the plate provides a very high conducting density. The advantages of this technology is its low internal resistance, high rates of discharge, improved recharge capability and lower weight with a high cycle life. The Ni-Cad Fibre Plate batteries are designed as L,M,H and X types to suit customers requirements. These batteries conform to IEC 60623 and are certified by Intertek ETL SEMKO. They also conform to BS6260, DIN 40771 and other International Standards.

View Complete Details

Get Best Quote

Nickel Cadmium Sintered Plate Batteries
Ask for Details

Nickel Cadmium Sintered Plate Batteries
Ask for Details

Nickel Cadmium Sintered Plate Batteries
Ask for Details

Nickel Cadmium Sintered Plate Batteries
Ask for Details

Nickel Cadmium Sintered Plate Batteries
Ask for Details

Nickel Cadmium Sintered Plate Batteries
Ask for Details

Nickel Cadmium Sintered Plate Batteries
Ask for Details

Nickel Cadmium Sintered Plate Batteries
Ask for Details

Nickel Cadmium Sintered Plate Batteries
Ask for Details

Nickel Cadmium Sintered Plate Batteries
Ask for Details

Nickel Cadmium Sintered Plate Batteries
Ask for Details

Opzs Series
For more information
Contact Now

Opzs Series

Get Latest Price

HBL OPzS batteries are robust and proven tubular plate technology batteries, ideal for use in all standby and deep cycling applications that require highest levels of Reliability. They are designed and manufactured according to DIN Standard.
Technical characteristics
Positive Electrode : Tubular plate with low antimony lead alloy.
Negative Electrode : Pasted grid plate.
Separator : Microporous ribbed PE separator.
Electrolyte : Diluted sulphuric acid 1.24 kg/lt @ 20 C
Container : High impact, transparent SAN with electrolyte level marks Max/Min
Vent plug : Safety flame arrester vent plug
Terminals : Leak proof pole with brass insert
Connectors : Bolt-on type copper connector

View Complete Details

Get Best Quote
Tell us what you
need
Receive seller
details
Seal the deal
Save time! Get Best Deal
I agree to the terms and privacy policy