Conpac Mix Private Limited

CP NanoGrout A is a powder admixture for cementitious grouts, mortars and concrete. The plasticising agent allows the use of reduced water cement ratio with corresponding strength increase. CP NanoGrout SG is a two component, epoxy base, high strength, structural adhesive and anchor grout. It is available in paste and pourable grades.

CP MegaFlow P is a liquid, concrete plasticiser based on selected refined lignosulphonates and other key additives. When added to the concrete mix, it disperses the fine cement particles in the concrete mix and improves the workability. CP MegaFlow SP403 is a superior grade napthalene based superplasticiser designed for high performance concrete mixes in extreme weather conditions.

CP Nano Grout A is a powder admixture for cementitious grouts, mortars and concrete. The plasticising agent allows the use of reduced water cement ratio with corresponding strength increase. The expansion compensates the natural settlement and plastic shrinkage.

CP NanoGrout Aid is a non-shrink additive in powder form. It makes the grout mix cohesive and free from segregation and bleeding. It is designed to allow uniform expansion while maintaining high fluidity.

CP Nano Grout CFG is a ready to use, high strength, highly flowable, non-shrink cementitious grout. It requires only addition of water at site. It consists of portland cement and special chemicals for non-shrinkage properties, high fluidity and retention properties of the mix at low water cement ratio.

CP NanoGrout GP is a cement based, non-metallic, non-shrink, free flowing grout that maintains a fluid consistency for a longer duration.

CP Nano Grout PG is cement based, non-metallic, non-shrink, dual expansion, free flow precision grout, which provides excellent dimensional stability and highest effective bearing area.

CP Nano Grout HES is a ready to use, cementitious, non-metallic, non-shrink, free flow grout for high early and ultimate strength requirement to facilitate faster loading.

CP NanoGrout MG is non shrink free flow grout that maintains a fluid consistency for long time. It contains special cements, graded aggregates and fillers with additives to have a control on bleeding, expansion in plastic and hardened state, low heat of hydration, etc.

CP NanoGrout RES is a rapid early strength, free flow cementitious grout supplied as a ready to use dry powder. It requires only addition of clean water.

CP Nano Grout SG is a two component, epoxy base, high strength, structural adhesive and anchor grout. It is available in paste and pourable grades.

CP NanoGrout EG is a solvent free, highly flowable, three component epoxy resin grout specially designed for heavy engineering grouting where dynamic loads are encountered.

CP NanoGrout EGLE is a solvent free, three component, free flow epoxy grout designed for mass grouting. Due to its low exothermic reaction, it is particularly suitable for grouting at high ambient temperatures.

CP ReCon PH is a one part, polymer modified, cementitious thin fairing coat repair mortar for concrete surfaces, plaster surfaces, etc.

CP ReCon HS is a ready to use single component, polymer modified non-shrink repair mortar containing fibers and silica fume. It contains specially selected ingredients to provide high strength, fine, smooth repaired surfaces.

CP ReCon 35LW is a polymer modified cement based product that needs addition of water at site to produce a consistent and high quality medium weight repair mortar for vertical and overhead repairs.

CP ReCon MC is a high strength, free flowing, shrinkage compensated micro concrete with low alkali content. It provides a dimensionally stable, free flowing micro concrete with controlled expansion. It exhibits excellent thermal compatibility with concrete.

CP ReCon RESC is a two part, rapid setting, high early strength dry pre mix concrete. It is a blend of special cements and processed aggregates to impart high strength and non-shrink properties