Dabs Automation

We are among the well-known organization for continuously offering complete range of Wika Head Mounted Temperature Transmitter to respected clients. These products are made-up under the leadership of skilled personnel using finest quality raw material,

Special features of the temperature transmitter 

For the connection of Pt100 and Pt1000 sensors in a 2-, 3- or 4-wire connection

For the connection of reed chains in a potentiometer circuit

Parameterisation with the WIKAsoft-TT configuration software and electrical connection via quick connector magWIK

Connection terminals also accessible from the outside

Accuracy < 0.2 K (< 0,36 °F) / 0.1 %

Features:

Universal process controller

Any 2 analog values within the CM30 can be plotted on the trend display to give a short-term process history. This feature enables control efficiency to be monitored against setpoint and assists in tuning during commissioning.

The CM30''s full text display and simple-to-navigate, pop-up menu makes operation exceptionally easy. A programmable soft key enables commonly used functions, such as alarm acknowledgement and display selection, to be accessed easily by the operator.

Once initial configuration is complete, a powerful autotune facility enables automatic calculation of the PID values required, enabling rapid commissioning of the CM30.

The CM30''s gain scheduling functionality is used for efficient control of non-linear processes. Up to 3 different sets of PID parameters are selected automatically from a reference signal ensuring optimum control response, regardless of the process status.

Control of processes with long dead-times, such as pH dosing in a pipeline, is addressed easily using pPI control. Configured via only 3 parameters (gain, integral time and dead-time), pPI control can also be combined with gain scheduling for optimum control efficiency

Adaptive control enables the CM30 to adjust its control response automatically to suit changing process dynamics. This makes the CM30 particularly useful for processes with varying or uncontrolled types of load, by providing continuous tuning to maximize control efficiency. Fig. 9 shows a product used in a manufacturing process that is stored in an outside tank. The use of adaptive control within the manufacturing process compensates automatically for the change in product temperature caused by seasonal variation.

The CM30 can also be configured to perform split output control, for example, when both heating and cooling of a single process is required.

The CM30''s control setpoint can be selected via external digital signals, for example, simplifying operation by selecting different setpoints using external push buttons.

In addition to switching via the front panel, the CM30 can be switched between automatic and manual control mode using an external signal. When switched to manual mode via a digital signal, the value of the control output can be preset, for example, to fully open a control valve automatically during a cleaning cycle.

Process alarms 8 independent process alarms can monitor any analog signal within the CM30, enabling extensive process monitoring capability. Alarms can be used to drive physical outputs or soft-wired to other functions within the controller. Real-time alarms The ''alarm clock'' functionality provided by the CM30''s realtime alarms enables time-of-day decisions to be introduced into the controller''s actions or specific functions to be triggered routinely at specified times. Delay timers Event sequencing is enabled through the use of the CM30''s delay timers. 

A predetermined delay and output duration can be programmed into each delay timer and timers can be linked together. Custom linearizers The CM30 has 2 independent 20-point custom linearizers that can be applied to any analog signal within the controller. These linearizers can be used in applications such as level-to-volume conversion of a non-linear tank level or to accommodate special input signals or output devices. 

Features :

Memory for 32,700 readings 

LCD to show logging information easily Free selectable measurement cycle from 1sec to 24hrs.

Display all status for Alarm and Record through 2 LED’s. Alarm display if user-defined max/min values are exceeded Analysis software used to view graphically or Text mode for logging data. USB Computer Interface (Advanced Software Program for all windows) 

We are involved in offering a wide range of Circular Chart Recorder Model CR-2010. These are micro controller based devices, which is available in 11, 6,4 chart sizes. The 8 digit display & key board in the device allow easy programming of recording range, controller set points, calibration factors and chart speed. Further, these Recorders are also equipped with optional digital display for continuous reading of parameter values and displaying messages.

Features

Microcontroller based for precision, convenience and flexibility 8 digit display & key board allow easy programming of recording range, controller set points, calibration factors, chart speed Polynomial based linearization for RTD, mA, mV and thermocouple types J, K, R, S, T with software compensation for cold junction temperature Software based Mechanical Calibration (Pen Alignment) for easy maintenance Pens driven by Stepper Motors- reliable, repeatable and trouble free; no potentiometric feedback Available in 11 and 6 chart sizes An optional digital display for continuous reading of parameter values and displaying messages Mechanical and electronic calibration done from front panel keyboard.

G-TEK Circular Chart Recorders are rugged and reliable in performance. With a microprocessor based design, you are assured of greater flexibility, convenience and precision.

The pen and chart movement in our recorders are driven by stepper motors, which further enhances the reliability by removing the need for any potentiometric or mechanical feedback system

Battery Backup 

Relay Outputs

Math / Other Functions

Transmitter Power Supply

PC Interface

Enhanced Resolution

Wall Mounting

Modbus Compatibility

WIKA Bimetallic Temperature Gauge are the entrylevel model among process thermometers. The target markets of this thermometer are air-conditioning and machine building. We are manufactured in accordance with EN 13190 and already offer a stainless steel case and accuracy class 1 for nominal sizes > 60 mm. Especially noteworthy is the large number of stem lengths and nominal sizes. This enables the individual adaptation to the target applications.

Smart Type Temperature Transmitter Backed by a capable and skillful team of experts, we are highly engaged in offering a high-quality range of Smart Type Temperature Transmitter to respected clients. These products are made-up using top quality raw materials, which is procured from authentic merchant of the market. Furthermore, these products are offered at clients end within guaranteed time. Field mounted, head Mounted, panel mounted Temperature transmitter, Total solution for temperature measurement.

Features:

• Longer functionality
• Easy to avail
• Precisely designed
• In explosive atmosphere 
• Keep tight when circuit alive

T-Series High Temperature Switch are designed for use in arduous industrial environment. The gas / vapour felled thermal system in combination with diaphragm sealed piston actuator offers stable measurement of temperature.Actuation mechanism ensures precise switching of desired set points. Wide options of micro switches are available to handle different electrical ratings. T-Series Temperature Switches are available with rigid stem for direct mounting or with flexible armored capillary for remote mounting. Adjustable sliding compression gland allows easy installation and adjustment of immersion length.Standard applications include Heat Exchangers, Evaporators, Heat Throwing, Pumps, Compressors, Furnace, Flowers, Air Dryers and so on.Make-Switzer /Indfoss/ Trafag