Delta Technologies

High quality Basic Electronic Trainer Kit is offered by us. This Basic Electronic Trainer Kit is feature packed with the latest advancements. Perfectly fabricated with the highest grade components, Basic Electronic Trainer Kit provided by us is known for its high performance and accurate results.

Feature

• Completely self-contained stand alone unit.
• Built in IC based DC regulated power supply.
• Test points provided on panel at various stages in the circuit.
• Set of required number of Patch cords.
• Strongly supported by a comprehensive instruction manual complete with theory and operating details.

Experiments

• To Study the Characteristic of Diode and Zener Diode.
• To Study the Rectifier Circuit.
• To Study the Characteristic of Transistor and Application of Transistor.
• To Study the Characteristic of UJT.
• To Study the Characteristic of FET.
• To Study the Characteristic of MOSFET.
• To Study the Characteristic of SCR.
• To Study the Characteristic of Triac.
• To Study the Characteristic of Diac.
  
• To Study the Characteristic of Network Theorem.

Specifications

• D.C. Power Supply : +5 Volt / 1 Amp fixed output + 15Volt / 500 mA fixed dual output 0 to +15V / 500 mA variable dual output
• A.C. Power Supply : 6V, 12V, 18V at 50 Hz @ 0.3 Amp
• Sine / Square/Triangle : 1 Hz to 100KHz with 0 to 10 V peak to peak
• Clock : 0.1Hz to 100KHz to monitor logic signal propagation.
• Pulser Switch : 1 no. of debounced switch with push to 1output
• In-built Digital Voltmeter and Ammeter.
• Bread Board : A large size Bread Board with 2420 tie points
• Speaker : 8-ohms speaker is built in for audio use.
• Potentiometers : 6 nos. of potentiometers values between 100Ohms to 20K
• Front Panel : High finish alpine wood cabinet and printed
• Power : 230V + 10% 50 Hz

Accessories

• Operating Manual : An Instruction manual with 50 different types of Experiments
• Connecting Wires : 10 nos. of 2 mm Multiconnection Patch cords & 50 meters of Bread Board wire.

Digital Electronic Trainer Kit, that we offer, is among our most widely demanded Teaching Equipment. Precision engineered with the latest technology, Digital Electronic Trainer Kit provided by us is well-known for giving high performance. Students can easily understand the concept with this Digital Electronic Trainer Kit.

Feature

• Completely self-contained stand alone unit.
• Built in IC based DC regulated power supply.
• Test points provided on panel at various stages in the circuit.
• Set of required number of Patch cords
• Strongly supported by a comprehensive instruction manual complete with theory and operating details.

Experiments

• To Study the Operation of Digital Logic ICs TTL and CMOS.
• To Study the AND,OR, NOT, NAND , NOR, XOR Gates, Flip-Flops, Counters etc.
• To Study the Flip-Flops.
• To Study the Counters.
• To Study the Shift Register.
• To Study the Multiplexer and De-Multiplexer.
• To Study the Encoder and Decoder.
• To Study the ALU.

Specifications

• 7 segment LED display (2 nos.)
• Logic input switches (10 nos.)
• Logic status indicators (10 nos.)
• Bounce less Pulsar 1 Hz to 100 KHz TTL clocks.
• Bread Board - 2 Nos.
• Power LED Indication.
• Built in Regulated Power Supply: 5V/1A ,12V/1A DC
• AC Input : 230V AC, 50 Hz, ± 10%.
• Mounted on a Sophisticated Cabinet.
• Document : Details Operational Manual.
• Accessories : Patch Cords.

We hold expertise in manufacturing and supplying the best quality Instrumentation Trainer Kit. Instrumentation Trainer Kit, that we make available, is used for understanding various concepts in an easy manner. Made with top quality components, Instrumentation Trainer Kit offered by us is precision engineered for excellent functionality.

Feature

• Completely self-contained stand . alone unit.
• Built . in IC based DC regulated power supply.
• Test points provided on panel at various stages in the circuit.
• Set of required number of Patch cords.
• Strongly supported by a comprehensive instruction manual complete with theory and operating details.

Experiments

• To Study the Load Cell Sensor.
• To Study the LVDT Sensor.
• To Study the Temperature Sensor (K-type Thermocouple, RTD, Thermistor).
• To Study the Pressure Sensor.
• To Study the LDR Sensor.
• To Study the Photo Diode Sensor.
• To Study the Photo Transistor Sensor.

Specifications

• 2mm BS-4 Jack Terminal for Various Test Point.
• Power LED Indication.
• In-Built Digital Indicator.
• Analog Output: 0 to 1000mV.
• Built in Regulated DC Source.
• AC Input: 230V AC, 50 Hz, ± 10%.
• Mounted on a Sophisticated Cabinet.

Document : Details Operational Manual.

Accessories : Standard Weights , Patch Cords, Micrometer, Electrical Heater, Thermometer, Light Source, Pressure Tank.

High quality OP AMP Training Kit is offered by us. This OP AMP Training Kit is fully loaded with the latest features. Perfectly fabricated with the highest grade components, OP AMP Training Kit provided by us is known for its high performance and accurate results. Students find it easy to understand the concepts with our OP AMP Training Kit.

Features

• Completely self-contained stand . alone unit.
• Built in IC based DC regulated power supply.
• Test points provided on panel at various stages in the circuit.
• Set of required number of Patch cords.
• Strongly supported by a comprehensive instruction manual complete with theory and operating details.

Experiments

• To Study Op-Amp Inverting, Non-Inverting Amplifier Circuit.
• To Study Op-Amp Summer & Subtractor.
• To Study Op-Amp Voltage follower Current follower.
• To Study Op-Amp Comparator Circuit.
• To Study Op-Amp Differentiator and Integrator Circuit.
• To Study Op-Amp Null Detector, Offset Current & Voltage Circuit.
• To Study Op-Amp Clipping Amplifier.
• To Study Op-Amp Sample & Hold Circuit.
• To Study Op-Amp Schimitt Trigger Circuit.

Specifications

• AC Power Supply : 15 . 0 . 15 V AC.
• DC Power Supply : Fixed : ± 5 Volts @ 1 Amp. , ± 12 Volts @ 1 Amp 1.2 to ±15 @ 1 Amp Variable DC
• Built In Op-Amp ICs: 741.
• Built In Digital meter 3.5 Digit.
• Clock Generator : Range : 1 HZ to 10 KHz.
• On Board : Potentiometers - 1K , 4.7 K , 10 K , 47 K , 100 K Ohm to 470 K Ohm.
• Bread Board : 2 Nos. Solder Less Bread Board.
• AC Input : 230V AC , 50 Hz , ± 10%.
• Mounted on a Sophisticated Cabinet..
• Document : Details Operation

We are engaged in offering premium Process Control Trainer. Process Control Trainer offered by us is known for high performance and is very easy to understand. The set up of our Process Control Trainer consists of a centrifugal pump coupled with electrical motor, supply tank, measuring tank & pipe fittings for closed loop water circulation.

Features

• Water Circulation Closed loop.
• Compact & stand-alone set up
• MS Tanks with FRP Lining.
• Powder Coated Painted structure
• Simple to operate & maintain

Experiments

• To Study the Flow Control Loop.
• To Study the Level Control Loop.
• To Study the Pressure Control Loop.
• To Study the Temperature Control Loop.

Specifications

• Pump : ½ HP Centrifugal Pump.
• AC Motor : ½ HP 230V AC.
• Supply Tank : 120 Ltrs. Made of MS with FRP Lining.
• Measuring tank : 40 Ltrs. Made of MS with FRP Lining and fitted with piezo meter tube & scale.
• Piping & Fittings : GI/PVC with necessary Valves.
  
• Control Unit : PID Controller.
• Fitted with DP Transmitter, Capacitive type Level Transmitter, Temperature Transmitter with PT100Sensor, Pressure Transmitter, Pneumatic Operated Control Valves, I/P Converter, P/I Converter,Thyrister Drive for Heater Control, Pressure Gauges.
• Control panel : 1HP DOL Starter. Digital Timer. MCB Load and Line Indicator.

Utilities Required :

• Electric supply Provide : 230 +/-10 VAC, 50 Hz, Single phase
• Electric supply with proper earthing. (Neutral . Earth voltage less than 5 VAC.)
• 5A,Three pin socket with switch for pump. Water supply Tap water connection ½. BSP