Six Sigma Quality International

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other

ISO 39001:2012 specifies requirements for a road traffic safety (RTS) management system to enable an organization that interacts with the road traffic system to reduce death and serious injuries related to road traffic crashes which it can influence. The requirements in ISO 39001:2012 include development and implementation of an appropriate RTS policy, development of RTS objectives and action plans, which take into account legal and other requirements to which the organization subscribes, and information about elements and criteria related to RTS that the organization identifies as those which it can control and those which it can influence.

Starting 07th of May 2007, Russia requires a new approval for the custom clearance of Wireless Equipment. Basis on the existing legislation, all companies dealing with these kind of products,( such as wireless camera systems, remote controls, wireless home appliances, car alarm systems, walkie-talkies and other wireless equipment which has a transmitter and receiver) should apply to Radio Frequency Center of Russia and provide a special permission for the delivery of Wireless Equipment beside the GOST Certificate.

Procedure :

1. We should apply officially to the Radio Frequency Center for a certain Wireless Equipment.

2. A physical sample of the subject model is required in Moscow for testing.

3. Radio Frequency Center transmits all applications to the Ministry of Communication of Russia. Every 2 months, a special Commission in the Ministry meet and decide about permissions for applied products and provides the wireless conformity approval.

4. By means of this approval and GOST Certificate, it is possible to ship these kind of wireless products to Russia.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P,Other

What you will gain:
Higher Effectiveness and Efficiency on their JobExcellent
Career Enhancement Opportunity
Internationally Recognized Qualification
Photo-identity Card from ASCB(Europe) Ltd. - UKListing among an International list of Quality Professionals.

Through e-learning

• An efficient method of learning without having to physically go for classes
• Saves time and cost of travel, specially beneficial to working people
• Schedule of study does not interfere with the daily job or business
• Cuts down the boredom of listening to a monotonous lecture
• Student has choice of when to study and at what speed to study
• A comfortable route for enhancing one''''s career prospects
• No limitation in terms of age or background.

Established in the year 2000, at Mumbai, Maharashtra, India, we “Deming Certification Services Pvt. Ltd.,” offer clients total certifications solutions that helps in enhancing systems and processes at their end. Further, the expertise of certifications personnel also assist us in changing the working pattern of several organizations by bringing positive change in their work culture as well as inculcating quality in every sphere of involved operations.

The solutions offered by us cover areas like ISO 9001 Certification, ISO 27001 Certification, ISO 14001 Certification, SQC/SPC Certification, ISO 17025 Certification and ISO 22000 Certification. Apart from this, we also offer solutions for HACCP Certification, ISO/TS 16949 Certification, OHSAS 18001, Social Accountability Certification, Risk Assessment Services, ISO 20000 Certification, Project Management Certification, SA 8001 Certification and Third Party Inspection and Verification Services.

Our business operations are led by Mr. Mukesh Singh, who has with him rich experience in our industry sector. His visionary approach has also assisted us in emerging amongst fastest growing business management certification companies in our industry sector. Further, the service support provided by experienced industry professionals also allow us to offer clients a wide range of business certifications services for availing different certifications.

Today, our team of experts work in close coordination with clients and help them to access their specific requirements as well as add value to their systems. This is achieved through designing formats as well as assisting in implementation by continuous training, review of quality manual as well as undertaking other allied procedures. Other than this, the competitive prices of our services also makes them one of the most demanded in the market.

Additional Information:

• Item Code: LA27001

Passport of safety of chemical products (or material safety data sheet MSDS) is a document, relating to the form of technical documentation. The above-mentioned document has a single purpose - to inform people about all the characteristics (chemical, biological, radioactive, explosive, etc.) of the substances with which they have to work.

Safety passport and the certificate

MSDS, in contrast to the certificate (Declaration) of conformity does not contain information that the certified chemical products are qualitative or safe. This document also does not indicate the compliance of the certified product characteristics to the regulative document of the Russian Federation. If you need to assure customers about the quality of your product, you should make certificate (Declaration) of conformity.

Furthermore, all information, which the document (certificate) contains, should not be interpreted as a guide to the use of the substance. It is important to remember that certification center, where this document was issued assumes no legal responsibility for the truthfulness of the information provided in the certificate.

Thus, using any of the chemical product, which potentially can cause you harm, be sure to read the instructions of use, because MSDS may only serve as an additional information on the characteristics of the products.

The need for the passport of chemical products safety

Registration of the passport of safety is a necessary and important procedure, because the document has to be provided to the officer of the customs service of the Russian Federation in case of import or export of chemical products. Do not forget that the passport (certificate) of chemical products safety simplify the procedure of obtaining other documents of certification.

Yet another argument to obtain safety data sheet MSDS is the availability of its counterpart in the international arena, and, therefore, this document opens prospects for each organization to expand their business.

You can registrate the passport of chemical products safety in any certification authority, which has a permission from the Rosstandard.

How to obtain a passport of chemical products safety

When you contact the certification center "Russian Federation" to obtain safety data sheet MSDS, you will be pleasantly surprised by our service and competence.
Our experts will be glad to answer all your questions. Asking a question is fairly easy - just submit the application form.

If you already want to make the passport (certificate) of chemical product safety, leave your coordinates in this section of the site and we`ll contact you.

Registration of passport of chemical products safety is carried out in all certification authorities in the Russian Federation according to the following scheme:

* client`s request with an application at the centre of certification;
* provision of documents;
* testing of certifiable substances;
What information must MSDS contain

The staff of the laboratory hold dozens of analyses to identify all the characteristics of the substance. All the data is recorded in the enactment, which provides registration of the passport.

MSDS contains the following information:

* Identification of the certifiable substance;
* Information about the manufacturer company the of the substance;
* The chemical composition of the substance which is registrated in safety data sheet MSDS;
In conclusion, let us recall that the passport (certificate) the safety of the substance (or as it is also called «safety data sheet MSDS») - is a document, which maximally inform about all the characteristics of the particular substance.

Additional Information:

• Item Code: MSDS
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/A,Other

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other

We also offer Certification Services for GMP. W. H. O. defines good manufacturing practices (GMP) as "that part of quality assurance which ensures products are consistently produced & controlled to quality standards appropriate to their intended use & as required by marketing authorization."
 
GMP covers all aspects of manufacturing process that include:
 

Defined manufacturing process

Validated critical manufacturing steps

Suitable premises, storage, transport

Qualified & trained production and quality control personnel

Adequate laboratory facilities

Approved written procedures & instructions

Records to show all steps of defined procedures taken

Full traceability of products through batch processing records & distribution records

System for recall & investigation of complaints.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P

What they will gain:

Higher Effectiveness and Efficiency on their Job

Excellent Career Enhancement Opportunity

Internationally Recognized Qualification

Photo-identity Card from ASCB(Europe) Ltd. - UK

Listing among an International list of Quality Professionals.

ASCB(UK) Accreditated unique features of the Six Sigma Executive level programs are:

• Process Improvement tools will be taught in a very simple and effective manner for real application and there will be no fancy jargon and statistics.
• All the tools are taught with respect to Shop floor (Gemba) application.
• A compilation of the case studies will be given as part of the course material for easy understanding of the tools.
• Group of participants is expected to complete "One" Process Improvement Projects after completion of course using the tools taught. Participants will be provided support through e-mail and phone in their Projects.
• There will be written test that will be conducted at the end of the course to ensure that the participants have fully understood all the tools.

DCS will issue a Executive level program Certificate to successful candidates.

Established in the year 2000, at Mumbai, Maharashtra, India, we “Deming Certification Services Pvt. Ltd.,” offer clients total certifications solutions that helps in enhancing systems and processes at their end. Further, the expertise of certifications personnel also assist us in changing the working pattern of several organizations by bringing positive change in their work culture as well as inculcating quality in every sphere of involved operations.

The solutions offered by us cover areas like ISO 9001 Certification, ISO 27001 Certification, ISO 14001 Certification, SQC/SPC  Certification, ISO 17025  Certificationand ISO 22000 Certification. Apart from this, we also offer solutions for HACCPCertification, ISO/TS 16949 Certification, OHSAS 18001, Social Accountability Certification, Risk Assessment Services, ISO 20000 Certification, Project Management Certification, SA 8001 Certificationand Third Party Inspection and Verification Services.

Our business operations are led by Mr. Mukesh Singh, who has with him rich experience in our industry sector. His visionary approach has also assisted us in emerging amongst fastest growing business management certification companies in our industry sector. Further, the service support provided by experienced industry professionals also allow us to offer clients a wide range of business certifications services for availing different certifications.

Today, our team of experts work in close coordination with clients and help them to access their specific requirements as well as add value to their systems. This is achieved through designing formats as well as assisting in implementation by continuous training, review of quality manual as well as undertaking other allied procedures. Other than this, the competitive prices of our services also makes them one of the most demanded in the market.

Process Improvement tools will be taught in a very simple and effective manner for real application and there will be no fancy jargon and statistics.

• All the tools are taught with respect to Shop floor (Gemba) application.
• A compilation of the case studies will be given as part of the course material for easy understanding of the tools.
• Group of participants is expected to complete "One" Process Improvement Projects after completion of course using the tools taught. Participants will be provided support through e-mail and phone in their Projects.
• There will be written test that will be conducted at the end of the course to ensure that the participants have fully understood all the tools.

DCS will issue a SIX SIGMA Certificate to successful candidates.

Benefits :

• The Certified six sigma will acquire the skills of Problem Solving and making Process improvements in a very scientific manner. They will be of great resource to the Organization in their Process/Design trouble-shooting and can help in making Process improvements very fast and effectively.
• Understanding Six Sigma Concept
• Measurement methodology change from % defects into PPM level
• Calculation of Six Sigma Level of the projects and Accuracy level.
• The team will be guided for effective application of the tools during the entire certification process.
• At six sigma level defect should reach at 3.4 defects per 10 lacs(PPM) product manufactured or service offered that means accuracy of any work performed should be 99.9996% accurate. There are some of the organization who work at six sigma level are like Motorola, GE, intel etc.

Additional Information:

• Item Code: 6sigma
• Port of Dispatch: Mumbai
• Production Capacity: NA
• Delivery Time: Refer training calender
• Packaging Details: NA

Although the ISO 9000 Quality Standards have been welcomed by all industries in general, they are quite generic in nature. The Automotive Industry has realized that its requirements are much more stringent than the ISO 9000 standards. In 1988 Chrysler, ford and General Motor Corporation developed QS 9000 standard, which was accepted by ISO technical committee (TC 176) as TS 16949 automotive industry.

Our well developed process approach as well as rich industry experience also helps us in providing our customers highly effective Certification services for ISO 17025:2005. It is a leading international laboratory quality management system (QMS) standard. Further, ISO 17025:2005 is compatible with (but not equivalent to) ISO 9001:2000. ISO 17025 certification connects laboratory quality management system to all other laboratory processes.

The new requirements for achieving this certification include continual improvement of quality management system as well as improved communication with customers. Further, the Technical Requirements of 2005 revision are virtually unchanged.

An accredited ISO 17025 laboratory QMS will provide:

• Your assurance of meeting all customer quality requirements
• Improving your laboratory''''s competitiveness
• Eliminate waste
• Reduce risk
• Control laboratory methods variations

Kaizen Japanese for "improvement", or "change for the better" refers to philosophy or practices that focus upon continuous improvement of processes in manufacturing, engineering, and business management. It has been applied in healthcare,psychotherapy, life-coaching, government, banking, and other industries. When used in the business sense and applied to the workplace, kaizen refers to activities that continually improve all functions, and involves all employees from the CEO to the assembly line workers. It also applies to processes, such as purchasing and logistics, that cross organizational boundaries into the supply chain. By improving standardized activities and processes, kaizen aims to eliminate waste (see lean manufacturing). Kaizen was first implemented in several Japanese businesses after the Second World War, influenced in part by American business and quality management teachers who visited the country. It has since spread throughout the world and is now being implemented in many other venues besides just business and productivity.

The Toyota Production System is known for kaizen, where all line personnel are expected to stop their moving production line in case of any abnormality and, along with their supervisor, suggest an improvement to resolve the abnormality which may initiate a kaizen.

The cycle of kaizen activity can be defined as:

• Standardize an operation and activities.
• Measure the standardized operation (find cycle time and amount of in-process inventory)
• Gauge measurements against requirements
• Innovate to meet requirements and increase productivity
• Standardize the new, improved operations
• Continue cycle ad infinitum

This is also known as the Shewhart cycle, Deming cycle, or PDCA. Other techniques used in conjunction with PDCA include 5 Whys, which is a form of root cause analysis in which the user asks "why" to a problem and its answer five successive times. There are normally a series of root causes stemming from one problem,^[9] and they can be visualized using fishbone diagrams or tables.

Masaaki Imai made the term famous in his book Kaizen: The Key to Japan''s Competitive Success.^{[citation needed]}

Apart from business applications of the method, both Anthony Robbins^{[citation needed]} and Robert Maurer have popularized the kaizen principles into personal development principles. In the book One Small Step Can Change Your life: The Kaizen Way, and CD set The Kaizen Way to Success, Maurer looks at how individuals can take a kaizen approach in both their personal and professional lives.^[10][11]

In the Toyota Way Fieldbook, Liker and Meier discuss the kaizen blitz and kaizen burst (or kaizen event) approaches to continuous improvement. A kaizen blitz, or rapid improvement, is a focused activity on a particular process or activity. The basic concept is to identify and quickly remove waste. Another approach is that of the kaizen burst, a specific kaizen activity on a particular process in the value stream.

• Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Western Union

Our expertise also lies in offering customers complete certifications services for SQC/SPC Certification. With services handled by experienced professionals so as to ensure highly effective end results, the details include:

SPC/SQC

• Statistical process control (SPC) & statistical quality control (SQC) are foundation of process improvement
• Effectively implemented, SPC & SQC result in achieving higher quality at lower costs.

Key benefits:

• Reduced variation in product/process
• Reduced costs and/or better quality
• Increased capacity/yield

SPC & SQC summary -

• Statistical process control (SPC) & statistical quality control (SQC) software have different but complementary functions
• SPC software enables operators to monitor their process as well as determine its real-time status relative to specification
• It also helps in deciding when adjustment is necessary
• SQC software enables engineers to analyze their process performance over time as well as to determine process specifications necessary to produce product at desired quality level

The following matrix summarizes important differences between spc and sqc:

SPC SQC -

• Answers: what is happening Why is it happening
• Location used: on-line (on the shop floor) off-line (in an office)
• Used by: operators engineers, managers, statisticians
• Scope: limited variables (process conditions) full variables (process conditions, product characteristics)
• Data: smaller time frame (seconds – shifts) larger time frame (sub-seconds – years)
• Focus: reduce process variability improve product quality.

What you will gain:
Higher Effectiveness and Efficiency on their Job Excellent 
Career Enhancement Opportunity
Internationally Recognized Qualification
Photo-identity Card from ASCB(Europe) Ltd. - UKListing among an International list of Quality Professionals.

ASCB(UK) accredited unique features of the Six Sigma programs are:

Process Improvement tools will be taught in a very simple and effective manner for real application and there will be no fancy jargon and statistics.

All the tools are taught with respect to Shop floor (Gemba) application.

A compilation of the case studies will be given as part of the course material for easy understanding of the tools.

Group of participants is expected to complete "One" Process Improvement Projects after completion of course using the tools taught. Participants will be provided support through e-mail and phone in their Projects.

There will be written test that will be conducted at the end of the course to ensure that the participants have fully understood all the tools.

 
SSQI will issue a SIX SIGMA Certificate to successful candidates.
 
Benefits :

The Certified six sigma will acquire the skills of Problem Solving and making Process improvements in a very scientific manner. They will be of great resource to the Organization in their Process/Design trouble-shooting and can help in making Process improvements very fast and effectively.

Understanding Six Sigma Concept

Measurement methodology change from % defects into PPM level

Calculation of Six Sigma Level of the projects and Accuracy level.

The team will be guided for effective application of the tools during the entire certification process.

At six sigma level defect should reach at 3.4 defects per 10 lacs(PPM) product manufactured or service offered that means accuracy of any work performed should be 99.9996% accurate. There are some of the organization who work at six sigma level are like Motorola, GE, intel etc.

For The Description Refer Attached PDF File

What you will gain:
Higher Effectiveness and Efficiency on their Job Excellent 
Career Enhancement Opportunity
Internationally Recognized Qualification
Photo-identity Card from ASCB(Europe) Ltd. - UK Listing among an International list of Quality Professionals.

Established in the year 2000, our well defined Certifications Services assist in changing work cultures of the organizations as well as in inculcating quality in every sphere of operations involved at client''''''''s end. Our team of experts also strive towards further improving efficiency as well as profitability of organizations.

The solutions offered by us cover areas like ISO 9001:2008, ISO 10002:2004, ISO 13485:2003, ISO 14001:2004 Certification, ISO/TS 16949:2009 Certification, ISO 17025 Certification, OHSAS 18001:2007 Certification, ISO 20000-1:2005 Certification, ISO 20252:2006 Market Research, ISO 22000 Certification, ISO 27001:2005 Certification, ISO 29001:2007 Oil and Gas, SQC/SPC Certifications and HACCP.

Presently, some of the industries for whom we provide certifications services include Service Industries, Engineering, Pharmaceutical, Chemical, Food, Education, Hospital, Banking & Software and others.

The TQM concept was developed by a number of American management consultants, including W. Edwards Deming, Joeseph Juran, and A.V. Feigenbaum.^[3] Originally, these consultants won few converts in the United States. However, managers in Japan embraced their ideas enthusiastically and even named their premier annual prize for manufacturing excellence after Deming.

The Six Sigma management strategy originated in 1986 from Motorolas drive towards reducing defects by minimizing variation in processes.^[4]

The main difference between TQM and Six Sigma (a newer concept) is the approach.^[5] At its core, Total Quality Management (TQM) is a management approach to long-term success through customer satisfaction.

In a TQM effort, all members of an organization participate in improving processes, products, services and the culture in which they work.

The methods for implementing this approach come from people such as Philip B. Crosby, W. Edwards Deming, Armand V. Feigenbaum, Kaoru Ishikawa and Joseph M. Juran.

DCS privide training & audit your organization for TQM and sigma implementation and issue compliance certificate to your organization

Why inspect with us?  DCS & LL-C(Europe) has available a global network of qualified inspectors. We prefer experience and qualification of the inspector in combination with regular inspections on the production or assembly sited in the field of large assembly and complex equipment inspections. For inspections of simpler products (check of functionality, quantity and packing), we can offer appropriate prices thanks to the network of inspectors in more than 40 countries of the world. As standard with our quotation, we deliver anonymous curriculum vitae of an inspector for the customer to review his/her experience before placing an order. We are always looking for the most feasible inspection while keeping finances in mind. We always review the costs with respect to full customer costs; we also regard the costs for test samples, transport costs, inspector travelling expenses and last but not least the time factor.

Unique assemblies.  Surely always when the supplies of unique products are at stake (investment units, constructions, complex equipment). Hence, in cases when no series production products are involved but supplies where extensive financial loss may be suffered due to any error. For a series-produced product, it is always fine to replace the product, however, for a larger project poor quality sub-supplies may result in extra costs related to repairs, time shifting for delivery of the project as well as financial loss of the customer due to delayed launch of operation.
Remote supplier.  We have available a global network and our inspectors within he global network are often closer to the manufacturer than the customer representative. We can offer an inspection from one-day visit to permanent or repeated involvement at the manufacturer.
Legislation requirements.  We can arrange inspection services such as functional tests, reviews, measurement or completion of the documents and certificates required from competent bodies should the purchased product subject to legislation requirements of the importer’s country.
 

Check of project completeness.  This type of inspection is performed from the draft phase within the inspection of construction or production documentation followed by inspection right during the production, assembly or repairs of technical equipment and the final operation and review tests. For this inspection type, DCS & LL-C(Europe)  usually produces an independent inspection procedure submitted for final approval by the customer.

Declaration on conformity of producer, supplier or operator.  For some modules, where declaration on conformity by the producer or supplier is required for checking of compliance (e.g. CE mark), an inspection report from third party is a legitimate document for issuing of the certificate. Use our experience to help the producer, supplier or operator of equipment to find an optimum solution for cooperation from determination of basic requirements, testing up to full inspection services.
  

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Western Union

Why inspect with us? DCS-LL-C has available a global network of qualified inspectors. We prefer experience and qualification of the inspector in combination with regular inspections on the production or assembly sited in the field of large assembly and complex equipment inspections. For inspections of simpler products (check of functionality, quantity and packing), we can offer appropriate prices thanks to the network of inspectors in more than 40 countries of the world. As standard with our quotation, we deliver anonymous curriculum vitae of an inspector for the customer to review his/her experience before placing an order. We are always looking for the most feasible inspection while keeping finances in mind. We always review the costs with respect to full customer costs; we also regard the costs for test samples, transport costs, inspector travelling expenses and last but not least the time factor.

Unique assemblies. Surely always when the supplies of unique products are at stake (investment units, constructions, complex equipment). Hence, in cases when no series production products are involved but supplies where extensive financial loss may be suffered due to any error. For a series-produced product, it is always fine to replace the product, however, for a larger project poor quality sub-supplies may result in extra costs related to repairs, time shifting for delivery of the project as well as financial loss of the customer due to delayed launch of operation.
Remote supplier. We have available a global network and our inspectors within he global network are often closer to the manufacturer than the customer representative. We can offer an inspection from one-day visit to permanent or repeated involvement at the manufacturer.
Legislation requirements. We can arrange inspection services such as functional tests, reviews, measurement or completion of the documents and certificates required from competent bodies should the purchased product subject to legislation requirements of the importer’s country.

Ranges and types of the technical inspection

Check of project completeness. This type of inspection is performed from the draft phase within the inspection of construction or production documentation followed by inspection right during the production, assembly or repairs of technical equipment and the final operation and review tests. For this inspection type, DCS-LL-C usually produces an independent inspection procedure submitted for final approval by the customer.

Instrument for declaration of compliance

Declaration on conformity of producer, supplier or operator. For some modules, where declaration on conformity by the producer or supplier is required for checking of compliance (e.g. CE mark), an inspection report from third party is a legitimate document for issuing of the certificate. Use our experience to help the producer, supplier or operator of equipment to find an optimum solution for cooperation from determination of basic requirements, testing up to full inspection services.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Western Union

Why inspect with us? DCS-LL-C(Europe) has available a global network of qualified inspectors. We prefer experience and qualification of the inspector in combination with regular inspections on the production or assembly sited in the field of large assembly and complex equipment inspections. For inspections of simpler products (check of functionality, quantity and packing), we can offer appropriate prices thanks to the network of inspectors in more than 40 countries of the world. As standard with our quotation, we deliver anonymous curriculum vitae of an inspector for the customer to review his/her experience before placing an order. We are always looking for the most feasible inspection while keeping finances in mind. We always review the costs with respect to full customer costs; we also regard the costs for test samples, transport costs, inspector travelling expenses and last but not least the time factor.

Unique assemblies. Surely always when the supplies of unique products are at stake (investment units, constructions, complex equipment). Hence, in cases when no series production products are involved but supplies where extensive financial loss may be suffered due to any error. For a series-produced product, it is always fine to replace the product, however, for a larger project poor quality sub-supplies may result in extra costs related to repairs, time shifting for delivery of the project as well as financial loss of the customer due to delayed launch of operation.
Remote supplier. We have available a global network and our inspectors within he global network are often closer to the manufacturer than the customer representative. We can offer an inspection from one-day visit to permanent or repeated involvement at the manufacturer.

Ranges and types of the technical inspection

Participation during production and tests. The customer, who requires inspection, usually defines the scope of the inspection activities and tests according to its procedures. DCS-LL-C then checks compliance with the documents delivered by the customer in the form of approved technical documentation, procedures, and provisions in contracts or as reference to generally available standards. Either an inspection report or certificate on conformity is issued.
Provision of compliance with legislation requirements. Based on basic project submitted by the customer, DCS-LL-C will define additional requirements of legislation requirements of the target country or compliance of the same is reviewed during production, completion or operation tests. This type of service is usually used for supplies where a general contractor dispatches equipment to third country.
Inspection as a bank instrument. We offer inspection of quality, quantity and packaging in cases where the customer makes payment via a letter of credit and a certificate from an independent third party is one of the documents required.

Declaration on conformity of producer, supplier or operator. For some modules, where declaration on conformity by the producer or supplier is required for checking of compliance (e.g. CE mark), an inspection report from third party is a legitimate document for issuing of the certificate. Use our experience to help the producer, supplier or operator of equipment to find an optimum solution for cooperation from determination of basic requirements, testing up to full inspection services.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Western Union

Another name of the Fire Safety Certificate is the Certificate of Conformity to the Requirements of Fire Safety. The function of the given certificate is to prove conformity of the production to the approved rules of safety. In India the Certificate of Conformity to Requirements of Fire Safety may be received in the case when the production went through the procedure of certification tests after which their owner was provided with the protocol of the tests which serves as the base of issuing the Certificate. For each kind of production there are certain methods of tests and requirements which are described in the Fire Technical Reglament for some kind of goods.

Additional Information:

• Item Code: FireSafetyCertificate

• Lighting
• Consumer Electronics
• Household Appliances
• Medical
• Telecom
• Industrial
• HVAC/R
• Installation
• Components
• Measurement equipment

What you will gain:
Higher Effectiveness and Efficiency on their Job Excellent
Career Enhancement Opportunity
Internationally Recognized Qualification
Photo-identity Card from ASCB(Europe) Ltd. - UK Listing among an International list of Quality Professionals.

Through e-learning

• An efficient method of learning without having to physically go for classes
• Saves time and cost of travel, specially beneficial to working people
• Schedule of study does not interfere with the daily job or business
• Cuts down the boredom of listening to a monotonous lecture
• Student has choice of when to study and at what speed to study
• A comfortable route for enhancing one's career prospects
• No limitation in terms of age or background.

Offers professional and unparalleled training which allows their organization to overcome challenges to their employees and enable them to leap into the next technical age with ease and efficiency. The company crafts a software training program in response to client needs, and delivers it through instructor-led or computer-based programs at either client’s workplaces or at company’s Corporate Training Center in all over india

Since the inception of a formal training division since 1999, we acted on these principles of delivering the best knowledge from the best instructors from the industry. This resulted in a greater employment rate, evolution of a process where the candidates are trained while they are in the job towards the current business requirements and placed in projects without being unemployed.

Kaizen is approved by ASCB(UK) for training .DCS offer the Basic and Advanced Trainings in Kaizen. DCS Provides Corporate Trainings to the Companies, Our corporate training division designs and implements responsive, cost effective training programs that maximize the productivity of our clients' employees.

DCS has been reviewed and approved as a provider of project managemen. DCS’s Trainings are from the Senior Faculties, who have distinguished themselves in the industry for many years and has vast knowledge to deliver the Trainings as per the requirement of the Industry Standards.

Additional Information:

• Item Code: kaizen
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/A,Other

What you will gain:
Higher Effectiveness and Efficiency on their Job Excellent
Career Enhancement Opportunity
Internationally Recognized Qualification
Photo-identity Card from ASCB(Europe) Ltd. - UK Listing among an International list of Quality Professionals.

Through e-learning

• An efficient method of learning without having to physically go for classes
• Saves time and cost of travel, specially beneficial to working people
• Schedule of study does not interfere with the daily job or business
• Cuts down the boredom of listening to a monotonous lecture
• Student has choice of when to study and at what speed to study
• A comfortable route for enhancing one's career prospects
• No limitation in terms of age or background.

· Course is certified by ASCB(UK). Total quality management (TQM) has far-reaching implications for the management of human resources. It emphasizes self-control, autonomy, and creativity among employees and calls for greater active cooperation rather than just compliance.

· Indeed, it is becoming a maxim of good management that human factors are the most important dimension
in quality and productivity improvement.

· Involvement: A central idea of Human Resource utilization

· At the heart of the TQM is the concept of intrinsic motivation-involvement in decision making by the employees. Employee involvement is a process for empowering members of an organization to make decisions and to solve problems appropriate to their levels in the organization.

· The Lean (Toyota) systems, utilizing JIT techniques are more productive, smaller and more efficient, increases worker pride and involvement on shop floor.

· Define Employee Empowerment

· The dictionary definition of empowerment is to invest people with authority

· Empowerment should not be confused with delegation or job enrichment. Delegation refers to distributing and entrusting work to others. Employee empowerment requires that he individual is held responsible for accomplishing the whole task. The employee becomes process owner- thus the individual is not only responsible but also accountable. Employee empowerment requires that the individual is held responsible for accomplishing a whole task.

Suggestion System

Five Ground Rules for Stimulating and Encouraging Suggestion System are:

1. Be Progressive by regularly asking your employees for suggestions

2. Remove fear by focusing on the process and not on the person.

3. Simplify the process so it is easy to participate

4. Respond Quickly to suggestions and within specified period of time

5. Reward the idea with published recognition so that everyone knows the value of contribution.

Additional Information:

• Item Code: TQM
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/A,Other
• Production Capacity: TQM Training

New standard EN ISO 50001:2011 – energy management system.  Due to the growing costs of energies and as a result of searching for a new solution within industry a new standard was introduced, focusing on energy management with the objective to reduce costs of companies and overall CO2emissions.

Direct consumption of machines.  Within industrial production an important source of savings consists of optimising energy consumption by production lines, machines and various other equipment. We focus on whether various machines and equipment are not running without use, whether their output is optimised, and whether they are properly adjusted.
Production technology.  Another factor influencing energy consumption is optimisation of technological procedures which means that the same objective (namely a product of identical quality) can be achieved by changing the technological procedure with the objective of saving energies. This does not necessarily involve only the technological procedure itself but work organisation on shifts may be involved as well.
Energy consumption not directly related to production.  Insufficient thermal insulation, lighting system, obsolete ventilation, inefficiently arranged places of work and other drawbacks within auxiliary processes are another potential source of savings.
Attitude of employees.  Training and incentives in favour of employees in order to support meaningful savings provides companies with another positive effect when you consider all the invoices covering energy consumptions.

Analysis of the initial state.  The first step is to find out what the consumption of energy is during various states of operation, shifts and seasons. If it is not entirely detectable, then invest in measuring and monitoring equipment and subsequently analyse the consumption of energy according to individual operations, equipment, buildings. Then create a system of records, which will serve for subsequent monitoring.
Proposals for savings.  Within the scope of energy policies, determining the organisational measures and possibly arising investments would lead to a decrease among the greatest “consumers”, whether it concern debugging a production line, replacing equipment, organising shifts, relocating or heat cladding buildings.
Implementation of measures.  They can be used independently or (which is what we recommend) used in integration with other standards of modern management systems, particularly on the basis of ISO 14001, ISO 9001, OHSAS 18001 standards, which can cover the complex management system according to type, size and field of business. Subsequently, a comparison should be conducted with the initial state, whether or not only savings have occurred but also whether other parameters have worsened in the field of quality production or company economics.
External audit.  An audit performed by an independent side can contribute to further energy savings thanks to experience and an objective view.

Energy policy (3.2)  The basic element of the entire system, which has to include the status of company management’s commitment to energy management. The energy policy determines the long-term direction of the company. It affects the future company economics. Informally established energy policies lead to future savings in not only energy but also investment funds.

Other Information

• Pay Mode Terms: T/T (Bank Transfer), Western Union

Additional Information:

• Item Code: iso
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/A,Western Union

What you will gain:
Higher Effectiveness and Efficiency on their JobExcellent 
Career Enhancement Opportunity
Internationally Recognized Qualification
Photo-identity Card from ASCB(Europe) Ltd. - UKListing among an International list of Quality Professionals.

Course is accrediated by ASCB(UK).

Through e-learning

• An efficient method of learning without having to physically go for classes
• Saves time and cost of travel, specially beneficial to working people
• Schedule of study does not interfere with the daily job or business
• Cuts down the boredom of listening to a monotonous lecture
• Student has choice of when to study and at what speed to study
• A comfortable route for enhancing one''''s career prospects
• No limitation in terms of age or background.

What training is provided ?Leader training is provided by your facilitator during a concentrated three-day class. The leader then trains the members (with help as necessary from the facilitator) during a portion of each meeting. The member training takes place over a period of several weeks. Thereafter, additional training is provided only as required or as refresher.

When are Circle members trained ?

During Circle meetings, which are used both for training and for the study of projects.

What are the Quality Circle techniques ?

The most common techniques are :

· Brainstorming

· Data Gathering (sampling)

· Check Sheets

· Pareto Analysis

• Cause- -Effect Problem Analysis
• Presentation Techniques
• Histograms
• Control Charts
• Stratification
• Scatter Diagrams.

What is brainstorming ?

The technique used to bring everyone’s ideas out into the open is “brainstorming.” Each member, in turn, voice on possible cause of the problem. These ideas spark enthusiasm and originality, wild ideas are safe to offer because the rules of brainstorming do not permit criticism or ridicule. All ideas are recorded for later analysis.

What is data gathering ?

A major function of Circle is to analyze problems. Usually, before analysis can begin data must be accumulated. This is frequently done by the Circle members. Thus, training in data gathering and sampling techniques is necessary to assure accuracy and save time. Check sheets are convenient and economical ways to collect data.

Pareto analysis is a technique that separates the important few from the many trivial problems. The completed analysis is depicted in graph form with columns arranged in descending order. Each column represents a different problem. The tallest is the one on the left and is the problem that will be solved first because it is the most important.

This is a widely used and popular quality circle technique. A diagram with the appearance of a fish-bone is constructed while the problem is being brainstormed for possible causes. Later, cause-and-effect analysis identifies the most likely cause.

The best plan in the world will fall on its face unless it is properly sold. Several times a year each Circle has to do just that. The members use a presentation setting to make recommendations or provide status to their manager. Their training in presentation techniques includes the basics of public speaking and the fundamentals of preparing and using graphs and charts

• Item Code: Qualitycircle

Total quality management or TQM is an integrative philosophy of management for continuously improving the quality of products and processes.

TQM functions on the premise that the quality of products and processes is the responsibility of everyone who is involved with the creation or consumption of the products or services offered by an organization. In other words, TQM capitalizes on the involvement of management, workforce, suppliers, and even customers, in order to meet or exceed customer expectations. Considering the practices of TQM as discussed in six empirical studies, Cua, McKone, and Schroeder (2001) identified the nine common TQM practices as cross-functional product design, process management, supplier quality management, customer involvement, information and feedback, committed leadership, strategic planning, cross-functional training, and employee involvement.

TQM and Six Sigma

The TQM concept was developed by a number of American management consultants, including W. Edwards Deming, Joeseph Juran, and A.V. Feigenbaum.^[3] Originally, these consultants won few converts in the United States. However, managers in Japan embraced their ideas enthusiastically and even named their premier annual prize for manufacturing excellence after Deming.

The Six Sigma management strategy originated in 1986 from Motorolas drive towards reducing defects by minimizing variation in processes.^[4]

The main difference between TQM and Six Sigma (a newer concept) is the approach.^[5] At its core, Total Quality Management (TQM) is a management approach to long-term success through customer satisfaction.

In a TQM effort, all members of an organization participate in improving processes, products, services and the culture in which they work.

The methods for implementing this approach come from people such as Philip B. Crosby, W. Edwards Deming, Armand V. Feigenbaum, Kaoru Ishikawa and Joseph M. Juran.

Our expertise also lies in offering our customers highly effective Project Management Certification. With services being handled by experienced industry professionals, the service areas also include:

• Industrial project management
• Project management solutions
• Business project management

These services mostly cater to demands of newly established companies/clients who want to add another sister concern into existing company list. For delivering highly effective services, our team of experts keenly conduct research on following areas:

• The profile of the work
• Understand requirements of clients.

A distinctive feature of an energy inspection carried out by Russian Federation is its integrated nature. At the request of the customer the Company carries out a turn-key implementation of elaborated energy saving measures — from engineering and delivery to assembly and startup of equipment.

Mandatory energy inspection of an enterprise or organization is carried out stage by stage, within the following phases:

1. Assessment of the energy efficiency of an enterprise, determination of probable reasons of impractical use of (energy) resources, and selection of priority energy-saving areas
   • Analysis of existing contractual arrangements with energy (resource) providers.
   • Analysis of performance of the existing control and accounting system. Verification of whether device control data is complete and reliable. Verification of whether reporting documents are objective and representative.
   • Assessment of the technical condition of power-engineering equipment in terms of efficiency of energy use. Analysis of existing maintenance regulations, justification and regularity of repair and restoration works.
   • Assessment of performance of power-engineering equipment based on verification of whether the actual load corresponds to the installed capacity of production power-engineering equipment. A retrospective analysis of changes in production indicators and the energy business. Assessment of changes in energy consumption depending on production load based on available historical data.
   • Assessment of the effectiveness of resource consumption planning. Selective assessment of growth in energy consumption caused by irregular production.
   • A generalized assessment of potential growth of energy efficiency through the elimination of unreasonable losses of energy resources caused by physical wear and tear of equipment, inadequate process flowcharts, operating management and the existing system of accounting and control of energy resources.
   • Assessment of potential energy saving yielded by implementation of energy saving technologies and state-of-the-art energy-efficient equipment.
   • Determination of top-priority areas for increased energy efficiency of production and the reduced financial cost of resource procurement.
2. Development of measures and technical solutions to be included in the Energy Performance Certificate of the enterprise and (if necessary) the Energy Saving Program. Development and authorization of the Energy Performance Certificate of the enterprise
   • Inventory-taking of major energy consuming equipment for completion of standard forms of the Energy Performance Certificate.
   • Assessment of actual FER consumption balances.
   • Assessment of actual specific consumption of FER.
   • Development of commercially reasonable measures and technical solutions to be included in the Energy Performance Certificate.
   • Completion of standard forms of the Energy Performance Certificate.
   • Authorization of the Energy Performance Certificate by the management of the enterprise and superior organizations.
3. Development of the Program for Increased Energy Efficiency of Production and Development of the Energy Business for major industrial enterprises
   • Determination of criteria and priorities for formation of the program. Development and authorization (by specialists of the enterprise) of a concept of the program for development of the energy business and rational use of energy.
   • Check of fundamental limitations in terms of technical implementation of energy saving measures and innovative projects in manufacturing conditions of the enterprise.

Additional Information:

• Item Code: energyperformancecertificate
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Western Union

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Western Union

5S is the name of a workplace organization method that uses a list of five Japanese words: seiri,seiton,seiso,seiketsu, and shitsuke. Transliterated or translated into English, they all start with the letter "S". The list describes how to organize a work space for efficiency and effectiveness by identifying and storing the items used, maintaining the area and items, and sustaining the new order. The decision-making process usually comes from a dialogue about standardization, which builds understanding among employees of how they should do the work.

1. Sorting (Seiri)

Eliminate all unnecessary tools, parts, and instructions. Go through all tools, materials, and so forth in the plant and work area. Keep only essential items and eliminate what is not required, prioritizing things per requirements and keeping them in easily-accessible places. Everything else is stored or discarded.

2. Stabilizing or Straightening Out (Seiton)

There should be a place for everything and everything should be in its place. The place for each item should be clearly indicated.

3. Sweeping or Shining (Seiso)

Clean the workspace and all equipment, and keep it clean, tidy and organized. At the end of each shift, clean the work area and be sure everything is restored to its place. This makes it easy to know what goes where and ensures that everything is where it belong

4. Standardizing (Seiketsu)

Work practices should be consistent and standardized. All work stations for a particular job should be identical. All employees doing the same job should be able to work in any station with the same tools that are in the same location in every station. Everyone should know exactly what his or her responsibilities are for adhering to the first 3 S''''s.

Maintain and review standards. Once the previous 4 S''''s have been established, they become the new way to operate. Maintain focus on this new way and do not allow a gradual decline back to the old ways. While thinking about the new way, also be thinking about yet better ways. When an issue arises such as a suggested improvement, a new way of working, a new tool or a new output requirement, review the first 4 S''''s and make changes as appropriate.It should be made as a habit and be continually improved.

The Origins of 5S

5S was developed in Japan. It was first heard of as one of the techniques that enabled what was then termed ''''Just in Time Manufacturing''''. The Massachusetts Institute of Technology''''s 5-year study into the future of the automobile in the late 1980s^[2] identified that the term was inappropriate since the Japanese success was built upon far more than components arriving only at the time of requirement. John Krafcik, a researcher on the project, ascribed Lean to the collective techniques being used in Japanese automobile manufacturing; it reflected the focus on waste in all its forms that was central to the Japanese approach. Minimised inventory was only one aspect of performance levels in companies such as Toyota^[3] and in itself only arose from progress in fields such as quality assurance and Andon boards to highlight problems for immediate action.

Additional Information:

• Item Code: FSMS22001
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other

What you will gain:
Higher Effectiveness and Efficiency on their JobExcellent 
Career Enhancement Opportunity
Internationally Recognized Qualification
Photo-identity Card from ASCB(Europe) Ltd. - UKListing among an International list of Quality Professionals.

ASCB(UK) Accreditated Lean services is the application of the lean manufacturing concept to service ... Lean Six Sigma: methodology commonly known as Lean Six Sigma.In 2000, General Cable began its Lean Six Sigma journey to eliminate waste and non-value-added processes in manufacturing.Lean Six Sigma is a synergized managerial concept of Lean and Six Sigma that results in the elimination of the seven kinds of wastes/muda.

DCS provide training, implementation and certification from the scratch. Training includes Lean Six Sigma Green Belt, Lean Six Sigma Black Belt.

What they will gain:

Higher Effectiveness and Efficiency on their Job

Excellent Career Enhancement Opportunity

Internationally Recognized Qualification

Photo-identity Card from ASCB(Europe) Ltd. - UK

Listing among an International list of Quality Professionals.

Additional Information:

• Item Code: Leanmanagement
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other